ram: stm32mp1: add driver

Add driver and binding for stm32mp1 ddr controller and phy

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>

11 files changed, 1603 insertions, 0 deletions

diff --git a/MAINTAINERS b/MAINTAINERS
index c4f10aa692..e876c70259 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -199,6 +199,7 @@ ARM STM STM32MP
 M:	Patrick Delaunay <patrick.delaunay@st.com>
 S:	Maintained
 F:	arch/arm/mach-stm32mp
+F:	ram/stm32mp1
 
 ARM STM STV0991
 M:	Vikas Manocha <vikas.manocha@st.com>
diff --git a/arch/arm/mach-stm32mp/include/mach/ddr.h b/arch/arm/mach-stm32mp/include/mach/ddr.h
new file mode 100644
index 0000000000..b635001df8
--- /dev/null
+++ b/arch/arm/mach-stm32mp/include/mach/ddr.h
@@ -0,0 +1,12 @@
+/*
+ * Copyright (C) 2018, STMicroelectronics - All Rights Reserved
+ *
+ * SPDX-License-Identifier:	GPL-2.0+	BSD-3-Clause
+ */
+
+#ifndef __MACH_STM32MP_DDR_H_
+#define __MACH_STM32MP_DDR_H_
+
+int board_ddr_power_init(void);
+
+#endif
diff --git a/doc/device-tree-bindings/ram/st,stm32mp1-ddr.txt b/doc/device-tree-bindings/ram/st,stm32mp1-ddr.txt
new file mode 100644
index 0000000000..3028636c45
--- /dev/null
+++ b/doc/device-tree-bindings/ram/st,stm32mp1-ddr.txt
@@ -0,0 +1,299 @@
+ST,stm32mp1 DDR3/LPDDR2/LPDDR3 Controller (DDRCTRL and DDRPHYC)
+
+--------------------
+Required properties:
+--------------------
+- compatible	: Should be "st,stm32mp1-ddr"
+- reg		: controleur (DDRCTRL) and phy (DDRPHYC) base address
+- clocks	: controller clocks handle
+- clock-names	: associated controller clock names
+		  the "ddrphyc" clock is used to check the DDR frequency
+		  at phy level according the expected value in "mem-speed" field
+
+the next attributes are DDR parameters, they are generated by DDR tools
+included in STM32 Cube tool
+
+info attributes:
+----------------
+- st,mem-name	: name for DDR configuration, simple string for information
+- st,mem-speed	: DDR expected speed for the setting in MHz
+- st,mem-size	: DDR mem size in byte
+
+
+controlleur attributes:
+-----------------------
+- st,ctl-reg	: controleur values depending of the DDR type
+		  (DDR3/LPDDR2/LPDDR3)
+	for STM32MP15x: 25 values are requested in this order
+		MSTR
+		MRCTRL0
+		MRCTRL1
+		DERATEEN
+		DERATEINT
+		PWRCTL
+		PWRTMG
+		HWLPCTL
+		RFSHCTL0
+		RFSHCTL3
+		CRCPARCTL0
+		ZQCTL0
+		DFITMG0
+		DFITMG1
+		DFILPCFG0
+		DFIUPD0
+		DFIUPD1
+		DFIUPD2
+		DFIPHYMSTR
+		ODTMAP
+		DBG0
+		DBG1
+		DBGCMD
+		POISONCFG
+		PCCFG
+
+- st,ctl-timing	: controleur values depending of frequency and timing parameter
+		  of DDR
+	for STM32MP15x: 12 values are requested in this order
+		RFSHTMG
+		DRAMTMG0
+		DRAMTMG1
+		DRAMTMG2
+		DRAMTMG3
+		DRAMTMG4
+		DRAMTMG5
+		DRAMTMG6
+		DRAMTMG7
+		DRAMTMG8
+		DRAMTMG14
+		ODTCFG
+
+- st,ctl-map	: controleur values depending of address mapping
+	for STM32MP15x: 9 values are requested in this order
+		ADDRMAP1
+		ADDRMAP2
+		ADDRMAP3
+		ADDRMAP4
+		ADDRMAP5
+		ADDRMAP6
+		ADDRMAP9
+		ADDRMAP10
+		ADDRMAP11
+
+- st,ctl-perf	: controleur values depending of performance and scheduling
+	for STM32MP15x: 17 values are requested in this order
+		SCHED
+		SCHED1
+		PERFHPR1
+		PERFLPR1
+		PERFWR1
+		PCFGR_0
+		PCFGW_0
+		PCFGQOS0_0
+		PCFGQOS1_0
+		PCFGWQOS0_0
+		PCFGWQOS1_0
+		PCFGR_1
+		PCFGW_1
+		PCFGQOS0_1
+		PCFGQOS1_1
+		PCFGWQOS0_1
+		PCFGWQOS1_1
+
+phyc attributes:
+----------------
+- st,phy-reg	: phy values depending of the DDR type (DDR3/LPDDR2/LPDDR3)
+	for STM32MP15x: 10 values are requested in this order
+		PGCR
+		ACIOCR
+		DXCCR
+		DSGCR
+		DCR
+		ODTCR
+		ZQ0CR1
+		DX0GCR
+		DX1GCR
+		DX2GCR
+		DX3GCR
+
+- st,phy-timing	: phy values depending of frequency and timing parameter of DDR
+	for STM32MP15x: 10 values are requested in this order
+		PTR0
+		PTR1
+		PTR2
+		DTPR0
+		DTPR1
+		DTPR2
+		MR0
+		MR1
+		MR2
+		MR3
+
+- st,phy-cal	: phy cal depending of calibration or tuning of DDR
+	for STM32MP15x: 12 values are requested in this order
+		DX0DLLCR
+		DX0DQTR
+		DX0DQSTR
+		DX1DLLCR
+		DX1DQTR
+		DX1DQSTR
+		DX2DLLCR
+		DX2DQTR
+		DX2DQSTR
+		DX3DLLCR
+		DX3DQTR
+		DX3DQSTR
+
+Example:
+
+/ {
+	soc {
+		u-boot,dm-spl;
+
+		ddr: ddr@0x5A003000{
+			u-boot,dm-spl;
+			u-boot,dm-pre-reloc;
+
+			compatible = "st,stm32mp1-ddr";
+
+			reg = <0x5A003000 0x550
+			       0x5A004000 0x234>;
+
+			clocks = <&rcc_clk AXIDCG>,
+				 <&rcc_clk DDRC1>,
+				 <&rcc_clk DDRC2>,
+				 <&rcc_clk DDRPHYC>,
+				 <&rcc_clk DDRCAPB>,
+				 <&rcc_clk DDRPHYCAPB>;
+
+			clock-names = "axidcg",
+				      "ddrc1",
+				      "ddrc2",
+				      "ddrphyc",
+				      "ddrcapb",
+				      "ddrphycapb";
+
+			st,mem-name = "DDR3 2x4Gb 533MHz";
+			st,mem-speed = <533>;
+			st,mem-size = <0x40000000>;
+
+			st,ctl-reg = <
+				0x00040401 /*MSTR*/
+				0x00000010 /*MRCTRL0*/
+				0x00000000 /*MRCTRL1*/
+				0x00000000 /*DERATEEN*/
+				0x00800000 /*DERATEINT*/
+				0x00000000 /*PWRCTL*/
+				0x00400010 /*PWRTMG*/
+				0x00000000 /*HWLPCTL*/
+				0x00210000 /*RFSHCTL0*/
+				0x00000000 /*RFSHCTL3*/
+				0x00000000 /*CRCPARCTL0*/
+				0xC2000040 /*ZQCTL0*/
+				0x02050105 /*DFITMG0*/
+				0x00000202 /*DFITMG1*/
+				0x07000000 /*DFILPCFG0*/
+				0xC0400003 /*DFIUPD0*/
+				0x00000000 /*DFIUPD1*/
+				0x00000000 /*DFIUPD2*/
+				0x00000000 /*DFIPHYMSTR*/
+				0x00000001 /*ODTMAP*/
+				0x00000000 /*DBG0*/
+				0x00000000 /*DBG1*/
+				0x00000000 /*DBGCMD*/
+				0x00000000 /*POISONCFG*/
+				0x00000010 /*PCCFG*/
+			>;
+
+			st,ctl-timing = <
+				0x0080008A /*RFSHTMG*/
+				0x121B2414 /*DRAMTMG0*/
+				0x000D041B /*DRAMTMG1*/
+				0x0607080E /*DRAMTMG2*/
+				0x0050400C /*DRAMTMG3*/
+				0x07040407 /*DRAMTMG4*/
+				0x06060303 /*DRAMTMG5*/
+				0x02020002 /*DRAMTMG6*/
+				0x00000202 /*DRAMTMG7*/
+				0x00001005 /*DRAMTMG8*/
+				0x000D041B /*DRAMTMG1*/4
+				0x06000600 /*ODTCFG*/
+			>;
+
+			st,ctl-map = <
+				0x00080808 /*ADDRMAP1*/
+				0x00000000 /*ADDRMAP2*/
+				0x00000000 /*ADDRMAP3*/
+				0x00001F1F /*ADDRMAP4*/
+				0x07070707 /*ADDRMAP5*/
+				0x0F070707 /*ADDRMAP6*/
+				0x00000000 /*ADDRMAP9*/
+				0x00000000 /*ADDRMAP10*/
+				0x00000000 /*ADDRMAP11*/
+			>;
+
+			st,ctl-perf = <
+				0x00001201 /*SCHED*/
+				0x00001201 /*SCHED*/1
+				0x01000001 /*PERFHPR1*/
+				0x08000200 /*PERFLPR1*/
+				0x08000400 /*PERFWR1*/
+				0x00010000 /*PCFGR_0*/
+				0x00000000 /*PCFGW_0*/
+				0x02100B03 /*PCFGQOS0_0*/
+				0x00800100 /*PCFGQOS1_0*/
+				0x01100B03 /*PCFGWQOS0_0*/
+				0x01000200 /*PCFGWQOS1_0*/
+				0x00010000 /*PCFGR_1*/
+				0x00000000 /*PCFGW_1*/
+				0x02100B03 /*PCFGQOS0_1*/
+				0x00800000 /*PCFGQOS1_1*/
+				0x01100B03 /*PCFGWQOS0_1*/
+				0x01000200 /*PCFGWQOS1_1*/
+			>;
+
+			st,phy-reg = <
+				0x01442E02 /*PGCR*/
+				0x10400812 /*ACIOCR*/
+				0x00000C40 /*DXCCR*/
+				0xF200001F /*DSGCR*/
+				0x0000000B /*DCR*/
+				0x00010000 /*ODTCR*/
+				0x0000007B /*ZQ0CR1*/
+				0x0000CE81 /*DX0GCR*/
+				0x0000CE81 /*DX1GCR*/
+				0x0000CE81 /*DX2GCR*/
+				0x0000CE81 /*DX3GCR*/
+			>;
+
+			st,phy-timing = <
+				0x0022A41B /*PTR0*/
+				0x047C0740 /*PTR1*/
+				0x042D9C80 /*PTR2*/
+				0x369477D0 /*DTPR0*/
+				0x098A00D8 /*DTPR1*/
+				0x10023600 /*DTPR2*/
+				0x00000830 /*MR0*/
+				0x00000000 /*MR1*/
+				0x00000208 /*MR2*/
+				0x00000000 /*MR3*/
+			>;
+
+			st,phy-cal = <
+				0x40000000 /*DX0DLLCR*/
+				0xFFFFFFFF /*DX0DQTR*/
+				0x3DB02000 /*DX0DQSTR*/
+				0x40000000 /*DX1DLLCR*/
+				0xFFFFFFFF /*DX1DQTR*/
+				0x3DB02000 /*DX1DQSTR*/
+				0x40000000 /*DX2DLLCR*/
+				0xFFFFFFFF /*DX2DQTR*/
+				0x3DB02000 /*DX2DQSTR*/
+				0x40000000 /*DX3DLLCR*/
+				0xFFFFFFFF /*DX3DQTR*/
+				0x3DB02000 /*DX3DQSTR*/
+			>;
+
+			status = "okay";
+		};
+	};
+};
diff --git a/drivers/ram/Kconfig b/drivers/ram/Kconfig
index 47969f3f28..496e2b793b 100644
--- a/drivers/ram/Kconfig
+++ b/drivers/ram/Kconfig
@@ -33,3 +33,5 @@ config STM32_SDRAM
 	  STM32F7 family devices support flexible memory controller(FMC) to
 	  support external memories like sdram, psram & nand.
 	  This driver is for the sdram memory interface with the FMC.
+
+source "drivers/ram/stm32mp1/Kconfig"
diff --git a/drivers/ram/Makefile b/drivers/ram/Makefile
index 51ae6be655..3820d03aa4 100644
--- a/drivers/ram/Makefile
+++ b/drivers/ram/Makefile
@@ -6,6 +6,7 @@
 #
 obj-$(CONFIG_RAM) += ram-uclass.o
 obj-$(CONFIG_SANDBOX) += sandbox_ram.o
+obj-$(CONFIG_STM32MP1_DDR) += stm32mp1/
 obj-$(CONFIG_STM32_SDRAM) += stm32_sdram.o
 obj-$(CONFIG_ARCH_BMIPS) += bmips_ram.o
 
diff --git a/drivers/ram/stm32mp1/Kconfig b/drivers/ram/stm32mp1/Kconfig
new file mode 100644
index 0000000000..b9c816662c
--- /dev/null
+++ b/drivers/ram/stm32mp1/Kconfig
@@ -0,0 +1,12 @@
+
+config STM32MP1_DDR
+	bool "STM32MP1 DDR driver"
+	depends on DM && OF_CONTROL && ARCH_STM32MP
+	select RAM
+	select SPL_RAM if SPL
+	default y
+	help
+		activate STM32MP1 DDR controller driver for STM32MP1 soc
+		family:	support for LPDDR2, LPDDR3 and DDR3
+		the SDRAM parameters for controleur and phy need to be provided
+		in device tree (computed by DDR tuning tools)
diff --git a/drivers/ram/stm32mp1/Makefile b/drivers/ram/stm32mp1/Makefile
new file mode 100644
index 0000000000..9f05cd4b21
--- /dev/null
+++ b/drivers/ram/stm32mp1/Makefile
@@ -0,0 +1,8 @@
+#
+# Copyright (C) 2018, STMicroelectronics - All Rights Reserved
+#
+# SPDX-License-Identifier:	GPL-2.0+	BSD-3-Clause
+#
+
+obj-y += stm32mp1_ram.o
+obj-y += stm32mp1_ddr.o
diff --git a/drivers/ram/stm32mp1/stm32mp1_ddr.c b/drivers/ram/stm32mp1/stm32mp1_ddr.c
new file mode 100644
index 0000000000..ffe50d9cc2
--- /dev/null
+++ b/drivers/ram/stm32mp1/stm32mp1_ddr.c
@@ -0,0 +1,496 @@
+/*
+ * Copyright (C) 2018, STMicroelectronics - All Rights Reserved
+ *
+ * SPDX-License-Identifier:	GPL-2.0+	BSD-3-Clause
+ */
+
+#include <common.h>
+#include <clk.h>
+#include <ram.h>
+#include <reset.h>
+#include <timer.h>
+#include <asm/io.h>
+#include <asm/arch/ddr.h>
+#include <linux/iopoll.h>
+#include "stm32mp1_ddr.h"
+#include "stm32mp1_ddr_regs.h"
+
+#define RCC_DDRITFCR		0xD8
+
+#define RCC_DDRITFCR_DDRCAPBRST		(BIT(14))
+#define RCC_DDRITFCR_DDRCAXIRST		(BIT(15))
+#define RCC_DDRITFCR_DDRCORERST		(BIT(16))
+#define RCC_DDRITFCR_DPHYAPBRST		(BIT(17))
+#define RCC_DDRITFCR_DPHYRST		(BIT(18))
+#define RCC_DDRITFCR_DPHYCTLRST		(BIT(19))
+
+struct reg_desc {
+	const char *name;
+	u16 offset;	/* offset for base address */
+	u8 par_offset;	/* offset for parameter array */
+};
+
+#define INVALID_OFFSET	0xFF
+
+#define DDRCTL_REG(x, y) \
+	{#x,\
+	 offsetof(struct stm32mp1_ddrctl, x),\
+	 offsetof(struct y, x)}
+
+#define DDRPHY_REG(x, y) \
+	{#x,\
+	 offsetof(struct stm32mp1_ddrphy, x),\
+	 offsetof(struct y, x)}
+
+#define DDRCTL_REG_REG(x)	DDRCTL_REG(x, stm32mp1_ddrctrl_reg)
+static const struct reg_desc ddr_reg[] = {
+	DDRCTL_REG_REG(mstr),
+	DDRCTL_REG_REG(mrctrl0),
+	DDRCTL_REG_REG(mrctrl1),
+	DDRCTL_REG_REG(derateen),
+	DDRCTL_REG_REG(derateint),
+	DDRCTL_REG_REG(pwrctl),
+	DDRCTL_REG_REG(pwrtmg),
+	DDRCTL_REG_REG(hwlpctl),
+	DDRCTL_REG_REG(rfshctl0),
+	DDRCTL_REG_REG(rfshctl3),
+	DDRCTL_REG_REG(crcparctl0),
+	DDRCTL_REG_REG(zqctl0),
+	DDRCTL_REG_REG(dfitmg0),
+	DDRCTL_REG_REG(dfitmg1),
+	DDRCTL_REG_REG(dfilpcfg0),
+	DDRCTL_REG_REG(dfiupd0),
+	DDRCTL_REG_REG(dfiupd1),
+	DDRCTL_REG_REG(dfiupd2),
+	DDRCTL_REG_REG(dfiphymstr),
+	DDRCTL_REG_REG(odtmap),
+	DDRCTL_REG_REG(dbg0),
+	DDRCTL_REG_REG(dbg1),
+	DDRCTL_REG_REG(dbgcmd),
+	DDRCTL_REG_REG(poisoncfg),
+	DDRCTL_REG_REG(pccfg),
+};
+
+#define DDRCTL_REG_TIMING(x)	DDRCTL_REG(x, stm32mp1_ddrctrl_timing)
+static const struct reg_desc ddr_timing[] = {
+	DDRCTL_REG_TIMING(rfshtmg),
+	DDRCTL_REG_TIMING(dramtmg0),
+	DDRCTL_REG_TIMING(dramtmg1),
+	DDRCTL_REG_TIMING(dramtmg2),
+	DDRCTL_REG_TIMING(dramtmg3),
+	DDRCTL_REG_TIMING(dramtmg4),
+	DDRCTL_REG_TIMING(dramtmg5),
+	DDRCTL_REG_TIMING(dramtmg6),
+	DDRCTL_REG_TIMING(dramtmg7),
+	DDRCTL_REG_TIMING(dramtmg8),
+	DDRCTL_REG_TIMING(dramtmg14),
+	DDRCTL_REG_TIMING(odtcfg),
+};
+
+#define DDRCTL_REG_MAP(x)	DDRCTL_REG(x, stm32mp1_ddrctrl_map)
+static const struct reg_desc ddr_map[] = {
+	DDRCTL_REG_MAP(addrmap1),
+	DDRCTL_REG_MAP(addrmap2),
+	DDRCTL_REG_MAP(addrmap3),
+	DDRCTL_REG_MAP(addrmap4),
+	DDRCTL_REG_MAP(addrmap5),
+	DDRCTL_REG_MAP(addrmap6),
+	DDRCTL_REG_MAP(addrmap9),
+	DDRCTL_REG_MAP(addrmap10),
+	DDRCTL_REG_MAP(addrmap11),
+};
+
+#define DDRCTL_REG_PERF(x)	DDRCTL_REG(x, stm32mp1_ddrctrl_perf)
+static const struct reg_desc ddr_perf[] = {
+	DDRCTL_REG_PERF(sched),
+	DDRCTL_REG_PERF(sched1),
+	DDRCTL_REG_PERF(perfhpr1),
+	DDRCTL_REG_PERF(perflpr1),
+	DDRCTL_REG_PERF(perfwr1),
+	DDRCTL_REG_PERF(pcfgr_0),
+	DDRCTL_REG_PERF(pcfgw_0),
+	DDRCTL_REG_PERF(pcfgqos0_0),
+	DDRCTL_REG_PERF(pcfgqos1_0),
+	DDRCTL_REG_PERF(pcfgwqos0_0),
+	DDRCTL_REG_PERF(pcfgwqos1_0),
+	DDRCTL_REG_PERF(pcfgr_1),
+	DDRCTL_REG_PERF(pcfgw_1),
+	DDRCTL_REG_PERF(pcfgqos0_1),
+	DDRCTL_REG_PERF(pcfgqos1_1),
+	DDRCTL_REG_PERF(pcfgwqos0_1),
+	DDRCTL_REG_PERF(pcfgwqos1_1),
+};
+
+#define DDRPHY_REG_REG(x)	DDRPHY_REG(x, stm32mp1_ddrphy_reg)
+static const struct reg_desc ddrphy_reg[] = {
+	DDRPHY_REG_REG(pgcr),
+	DDRPHY_REG_REG(aciocr),
+	DDRPHY_REG_REG(dxccr),
+	DDRPHY_REG_REG(dsgcr),
+	DDRPHY_REG_REG(dcr),
+	DDRPHY_REG_REG(odtcr),
+	DDRPHY_REG_REG(zq0cr1),
+	DDRPHY_REG_REG(dx0gcr),
+	DDRPHY_REG_REG(dx1gcr),
+	DDRPHY_REG_REG(dx2gcr),
+	DDRPHY_REG_REG(dx3gcr),
+};
+
+#define DDRPHY_REG_TIMING(x)	DDRPHY_REG(x, stm32mp1_ddrphy_timing)
+static const struct reg_desc ddrphy_timing[] = {
+	DDRPHY_REG_TIMING(ptr0),
+	DDRPHY_REG_TIMING(ptr1),
+	DDRPHY_REG_TIMING(ptr2),
+	DDRPHY_REG_TIMING(dtpr0),
+	DDRPHY_REG_TIMING(dtpr1),
+	DDRPHY_REG_TIMING(dtpr2),
+	DDRPHY_REG_TIMING(mr0),
+	DDRPHY_REG_TIMING(mr1),
+	DDRPHY_REG_TIMING(mr2),
+	DDRPHY_REG_TIMING(mr3),
+};
+
+#define DDRPHY_REG_CAL(x)	DDRPHY_REG(x, stm32mp1_ddrphy_cal)
+static const struct reg_desc ddrphy_cal[] = {
+	DDRPHY_REG_CAL(dx0dllcr),
+	DDRPHY_REG_CAL(dx0dqtr),
+	DDRPHY_REG_CAL(dx0dqstr),
+	DDRPHY_REG_CAL(dx1dllcr),
+	DDRPHY_REG_CAL(dx1dqtr),
+	DDRPHY_REG_CAL(dx1dqstr),
+	DDRPHY_REG_CAL(dx2dllcr),
+	DDRPHY_REG_CAL(dx2dqtr),
+	DDRPHY_REG_CAL(dx2dqstr),
+	DDRPHY_REG_CAL(dx3dllcr),
+	DDRPHY_REG_CAL(dx3dqtr),
+	DDRPHY_REG_CAL(dx3dqstr),
+};
+
+enum reg_type {
+	REG_REG,
+	REG_TIMING,
+	REG_PERF,
+	REG_MAP,
+	REGPHY_REG,
+	REGPHY_TIMING,
+	REGPHY_CAL,
+	REG_TYPE_NB
+};
+
+enum base_type {
+	DDR_BASE,
+	DDRPHY_BASE,
+	NONE_BASE
+};
+
+struct ddr_reg_info {
+	const char *name;
+	const struct reg_desc *desc;
+	u8 size;
+	enum base_type base;
+};
+
+#define DDRPHY_REG_CAL(x)	DDRPHY_REG(x, stm32mp1_ddrphy_cal)
+
+const struct ddr_reg_info ddr_registers[REG_TYPE_NB] = {
+[REG_REG] = {
+	"static", ddr_reg, ARRAY_SIZE(ddr_reg), DDR_BASE},
+[REG_TIMING] = {
+	"timing", ddr_timing, ARRAY_SIZE(ddr_timing), DDR_BASE},
+[REG_PERF] = {
+	"perf", ddr_perf, ARRAY_SIZE(ddr_perf), DDR_BASE},
+[REG_MAP] = {
+	"map", ddr_map, ARRAY_SIZE(ddr_map), DDR_BASE},
+[REGPHY_REG] = {
+	"static", ddrphy_reg, ARRAY_SIZE(ddrphy_reg), DDRPHY_BASE},
+[REGPHY_TIMING] = {
+	"timing", ddrphy_timing, ARRAY_SIZE(ddrphy_timing), DDRPHY_BASE},
+[REGPHY_CAL] = {
+	"cal", ddrphy_cal, ARRAY_SIZE(ddrphy_cal), DDRPHY_BASE},
+};
+
+const char *base_name[] = {
+	[DDR_BASE] = "ctl",
+	[DDRPHY_BASE] = "phy",
+};
+
+static u32 get_base_addr(const struct ddr_info *priv, enum base_type base)
+{
+	if (base == DDRPHY_BASE)
+		return (u32)priv->phy;
+	else
+		return (u32)priv->ctl;
+}
+
+static void set_reg(const struct ddr_info *priv,
+		    enum reg_type type,
+		    const void *param)
+{
+	unsigned int i;
+	unsigned int *ptr, value;
+	enum base_type base = ddr_registers[type].base;
+	u32 base_addr = get_base_addr(priv, base);
+	const struct reg_desc *desc = ddr_registers[type].desc;
+
+	debug("init %s\n", ddr_registers[type].name);
+	for (i = 0; i < ddr_registers[type].size; i++) {
+		ptr = (unsigned int *)(base_addr + desc[i].offset);
+		if (desc[i].par_offset == INVALID_OFFSET) {
+			pr_err("invalid parameter offset for %s", desc[i].name);
+		} else {
+			value = *((u32 *)((u32)param +
+					       desc[i].par_offset));
+			writel(value, ptr);
+			debug("[0x%x] %s= 0x%08x\n",
+			      (u32)ptr, desc[i].name, value);
+		}
+	}
+}
+
+static void ddrphy_idone_wait(struct stm32mp1_ddrphy *phy)
+{
+	u32 pgsr;
+	int ret;
+
+	ret = readl_poll_timeout(&phy->pgsr, pgsr,
+				 pgsr & (DDRPHYC_PGSR_IDONE |
+					 DDRPHYC_PGSR_DTERR |
+					 DDRPHYC_PGSR_DTIERR |
+					 DDRPHYC_PGSR_DFTERR |
+					 DDRPHYC_PGSR_RVERR |
+					 DDRPHYC_PGSR_RVEIRR),
+				1000000);
+	debug("\n[0x%08x] pgsr = 0x%08x ret=%d\n",
+	      (u32)&phy->pgsr, pgsr, ret);
+}
+
+void stm32mp1_ddrphy_init(struct stm32mp1_ddrphy *phy, u32 pir)
+{
+	pir |= DDRPHYC_PIR_INIT;
+	writel(pir, &phy->pir);
+	debug("[0x%08x] pir = 0x%08x -> 0x%08x\n",
+	      (u32)&phy->pir, pir, readl(&phy->pir));
+
+	/* need to wait 10 configuration clock before start polling */
+	udelay(10);
+
+	/* Wait DRAM initialization and Gate Training Evaluation complete */
+	ddrphy_idone_wait(phy);
+}
+
+/* start quasi dynamic register update */
+static void start_sw_done(struct stm32mp1_ddrctl *ctl)
+{
+	clrbits_le32(&ctl->swctl, DDRCTRL_SWCTL_SW_DONE);
+}
+
+/* wait quasi dynamic register update */
+static void wait_sw_done_ack(struct stm32mp1_ddrctl *ctl)
+{
+	int ret;
+	u32 swstat;
+
+	setbits_le32(&ctl->swctl, DDRCTRL_SWCTL_SW_DONE);
+
+	ret = readl_poll_timeout(&ctl->swstat, swstat,
+				 swstat & DDRCTRL_SWSTAT_SW_DONE_ACK,
+				 1000000);
+	if (ret)
+		panic("Timeout initialising DRAM : DDR->swstat = %x\n",
+		      swstat);
+
+	debug("[0x%08x] swstat = 0x%08x\n", (u32)&ctl->swstat, swstat);
+}
+
+/* wait quasi dynamic register update */
+static void wait_operating_mode(struct ddr_info *priv, int mode)
+{
+	u32 stat, val, mask, val2 = 0, mask2 = 0;
+	int ret;
+
+	mask = DDRCTRL_STAT_OPERATING_MODE_MASK;
+	val = mode;
+	/* self-refresh due to software => check also STAT.selfref_type */
+	if (mode == DDRCTRL_STAT_OPERATING_MODE_SR) {
+		mask |= DDRCTRL_STAT_SELFREF_TYPE_MASK;
+		stat |= DDRCTRL_STAT_SELFREF_TYPE_SR;
+	} else if (mode == DDRCTRL_STAT_OPERATING_MODE_NORMAL) {
+		/* normal mode: handle also automatic self refresh */
+		mask2 = DDRCTRL_STAT_OPERATING_MODE_MASK |
+			DDRCTRL_STAT_SELFREF_TYPE_MASK;
+		val2 = DDRCTRL_STAT_OPERATING_MODE_SR |
+		       DDRCTRL_STAT_SELFREF_TYPE_ASR;
+	}
+
+	ret = readl_poll_timeout(&priv->ctl->stat, stat,
+				 ((stat & mask) == val) ||
+				 (mask2 && ((stat & mask2) == val2)),
+				 1000000);
+
+	if (ret)
+		panic("Timeout DRAM : DDR->stat = %x\n", stat);
+
+	debug("[0x%08x] stat = 0x%08x\n", (u32)&priv->ctl->stat, stat);
+}
+
+void stm32mp1_refresh_disable(struct stm32mp1_ddrctl *ctl)
+{
+	start_sw_done(ctl);
+	/* quasi-dynamic register update*/
+	setbits_le32(&ctl->rfshctl3, DDRCTRL_RFSHCTL3_DIS_AUTO_REFRESH);
+	clrbits_le32(&ctl->pwrctl, DDRCTRL_PWRCTL_POWERDOWN_EN);
+	clrbits_le32(&ctl->dfimisc, DDRCTRL_DFIMISC_DFI_INIT_COMPLETE_EN);
+	wait_sw_done_ack(ctl);
+}
+
+void stm32mp1_refresh_restore(struct stm32mp1_ddrctl *ctl,
+			      u32 rfshctl3, u32 pwrctl)
+{
+	start_sw_done(ctl);
+	if (!(rfshctl3 & DDRCTRL_RFSHCTL3_DIS_AUTO_REFRESH))
+		clrbits_le32(&ctl->rfshctl3, DDRCTRL_RFSHCTL3_DIS_AUTO_REFRESH);
+	if (pwrctl & DDRCTRL_PWRCTL_POWERDOWN_EN)
+		setbits_le32(&ctl->pwrctl, DDRCTRL_PWRCTL_POWERDOWN_EN);
+	setbits_le32(&ctl->dfimisc, DDRCTRL_DFIMISC_DFI_INIT_COMPLETE_EN);
+	wait_sw_done_ack(ctl);
+}
+
+/* board-specific DDR power initializations. */
+__weak int board_ddr_power_init(void)
+{
+	return 0;
+}
+
+__maybe_unused
+void stm32mp1_ddr_init(struct ddr_info *priv,
+		       const struct stm32mp1_ddr_config *config)
+{
+	u32 pir;
+	int ret;
+
+	ret = board_ddr_power_init();
+
+	if (ret)
+		panic("ddr power init failed\n");
+
+	debug("name = %s\n", config->info.name);
+	debug("speed = %d MHz\n", config->info.speed);
+	debug("size  = 0x%x\n", config->info.size);
+/*
+ * 1. Program the DWC_ddr_umctl2 registers
+ * 1.1 RESETS: presetn, core_ddrc_rstn, aresetn
+ */
+	/* Assert All DDR part */
+	setbits_le32(priv->rcc + RCC_DDRITFCR, RCC_DDRITFCR_DDRCAPBRST);
+	setbits_le32(priv->rcc + RCC_DDRITFCR, RCC_DDRITFCR_DDRCAXIRST);
+	setbits_le32(priv->rcc + RCC_DDRITFCR, RCC_DDRITFCR_DDRCORERST);
+	setbits_le32(priv->rcc + RCC_DDRITFCR, RCC_DDRITFCR_DPHYAPBRST);
+	setbits_le32(priv->rcc + RCC_DDRITFCR, RCC_DDRITFCR_DPHYRST);
+	setbits_le32(priv->rcc + RCC_DDRITFCR, RCC_DDRITFCR_DPHYCTLRST);
+
+/* 1.2. start CLOCK */
+	if (stm32mp1_ddr_clk_enable(priv, config->info.speed))
+		panic("invalid DRAM clock : %d MHz\n",
+		      config->info.speed);
+
+/* 1.3. deassert reset */
+	/* de-assert PHY rstn and ctl_rstn via DPHYRST and DPHYCTLRST */
+	clrbits_le32(priv->rcc + RCC_DDRITFCR, RCC_DDRITFCR_DPHYRST);
+	clrbits_le32(priv->rcc + RCC_DDRITFCR, RCC_DDRITFCR_DPHYCTLRST);
+	/* De-assert presetn once the clocks are active
+	 * and stable via DDRCAPBRST bit
+	 */
+	clrbits_le32(priv->rcc + RCC_DDRITFCR, RCC_DDRITFCR_DDRCAPBRST);
+
+/* 1.4. wait 4 cycles for synchronization */
+	asm(" nop");
+	asm(" nop");
+	asm(" nop");
+	asm(" nop");
+
+/* 1.5. initialize registers ddr_umctl2 */
+	/* Stop uMCTL2 before PHY is ready */
+	clrbits_le32(&priv->ctl->dfimisc, DDRCTRL_DFIMISC_DFI_INIT_COMPLETE_EN);
+	debug("[0x%08x] dfimisc = 0x%08x\n",
+	      (u32)&priv->ctl->dfimisc, readl(&priv->ctl->dfimisc));
+
+	set_reg(priv, REG_REG, &config->c_reg);
+	set_reg(priv, REG_TIMING, &config->c_timing);
+	set_reg(priv, REG_MAP, &config->c_map);
+
+	/* skip CTRL init, SDRAM init is done by PHY PUBL */
+	clrsetbits_le32(&priv->ctl->init0,
+			DDRCTRL_INIT0_SKIP_DRAM_INIT_MASK,
+			DDRCTRL_INIT0_SKIP_DRAM_INIT_NORMAL);
+
+	set_reg(priv, REG_PERF, &config->c_perf);
+
+/*  2. deassert reset signal core_ddrc_rstn, aresetn and presetn */
+	clrbits_le32(priv->rcc + RCC_DDRITFCR, RCC_DDRITFCR_DDRCORERST);
+	clrbits_le32(priv->rcc + RCC_DDRITFCR, RCC_DDRITFCR_DDRCAXIRST);
+	clrbits_le32(priv->rcc + RCC_DDRITFCR, RCC_DDRITFCR_DPHYAPBRST);
+
+/*  3. start PHY init by accessing relevant PUBL registers
+ *    (DXGCR, DCR, PTR*, MR*, DTPR*)
+ */
+	set_reg(priv, REGPHY_REG, &config->p_reg);
+	set_reg(priv, REGPHY_TIMING, &config->p_timing);
+	set_reg(priv, REGPHY_CAL, &config->p_cal);
+
+/*  4. Monitor PHY init status by polling PUBL register PGSR.IDONE
+ *     Perform DDR PHY DRAM initialization and Gate Training Evaluation
+ */
+	ddrphy_idone_wait(priv->phy);
+
+/*  5. Indicate to PUBL that controller performs SDRAM initialization
+ *     by setting PIR.INIT and PIR CTLDINIT and pool PGSR.IDONE
+ *     DRAM init is done by PHY, init0.skip_dram.init = 1
+ */
+	pir = DDRPHYC_PIR_DLLSRST | DDRPHYC_PIR_DLLLOCK | DDRPHYC_PIR_ZCAL |
+	      DDRPHYC_PIR_ITMSRST | DDRPHYC_PIR_DRAMINIT | DDRPHYC_PIR_ICPC;
+
+	if (config->c_reg.mstr & DDRCTRL_MSTR_DDR3)
+		pir |= DDRPHYC_PIR_DRAMRST; /* only for DDR3 */
+
+	stm32mp1_ddrphy_init(priv->phy, pir);
+
+/*  6. SET DFIMISC.dfi_init_complete_en to 1 */
+	/* Enable quasi-dynamic register programming*/
+	start_sw_done(priv->ctl);
+	setbits_le32(&priv->ctl->dfimisc, DDRCTRL_DFIMISC_DFI_INIT_COMPLETE_EN);
+	wait_sw_done_ack(priv->ctl);
+
+/*  7. Wait for DWC_ddr_umctl2 to move to normal operation mode
+ *     by monitoring STAT.operating_mode signal
+ */
+	/* wait uMCTL2 ready */
+
+	wait_operating_mode(priv, DDRCTRL_STAT_OPERATING_MODE_NORMAL);
+
+	debug("DDR DQS training : ");
+/*  8. Disable Auto refresh and power down by setting
+ *    - RFSHCTL3.dis_au_refresh = 1
+ *    - PWRCTL.powerdown_en = 0
+ *    - DFIMISC.dfiinit_complete_en = 0
+ */
+	stm32mp1_refresh_disable(priv->ctl);
+
+/*  9. Program PUBL PGCR to enable refresh during training and rank to train
+ *     not done => keep the programed value in PGCR
+ */
+
+/* 10. configure PUBL PIR register to specify which training step to run */
+	/* warning : RVTRN  is not supported by this PUBL */
+	stm32mp1_ddrphy_init(priv->phy, DDRPHYC_PIR_QSTRN);
+
+/* 11. monitor PUB PGSR.IDONE to poll cpmpletion of training sequence */
+	ddrphy_idone_wait(priv->phy);
+
+/* 12. set back registers in step 8 to the orginal values if desidered */
+	stm32mp1_refresh_restore(priv->ctl, config->c_reg.rfshctl3,
+				 config->c_reg.pwrctl);
+
+	/* enable uMCTL2 AXI port 0 and 1 */
+	setbits_le32(&priv->ctl->pctrl_0, DDRCTRL_PCTRL_N_PORT_EN);
+	setbits_le32(&priv->ctl->pctrl_1, DDRCTRL_PCTRL_N_PORT_EN);
+}
diff --git a/drivers/ram/stm32mp1/stm32mp1_ddr.h b/drivers/ram/stm32mp1/stm32mp1_ddr.h
new file mode 100644
index 0000000000..b77d823868
--- /dev/null
+++ b/drivers/ram/stm32mp1/stm32mp1_ddr.h
@@ -0,0 +1,210 @@
+/*
+ * Copyright (C) 2018, STMicroelectronics - All Rights Reserved
+ *
+ * SPDX-License-Identifier:	GPL-2.0+	BSD-3-Clause
+ */
+
+#ifndef _RAM_STM32MP1_DDR_H
+#define _RAM_STM32MP1_DDR_H
+
+enum stm32mp1_ddr_interact_step {
+	STEP_DDR_RESET,
+	STEP_CTL_INIT,
+	STEP_PHY_INIT,
+	STEP_DDR_READY,
+	STEP_RUN,
+};
+
+/* DDR CTL and DDR PHY REGISTERS */
+struct stm32mp1_ddrctl;
+struct stm32mp1_ddrphy;
+
+/**
+ * struct ddr_info
+ *
+ * @dev: pointer for the device
+ * @info: UCLASS RAM information
+ * @ctl: DDR controleur base address
+ * @clk: DDR clock
+ * @phy: DDR PHY base address
+ * @rcc: rcc base address
+ */
+struct ddr_info {
+	struct udevice *dev;
+	struct ram_info info;
+	struct clk clk;
+	struct stm32mp1_ddrctl *ctl;
+	struct stm32mp1_ddrphy *phy;
+	u32 rcc;
+};
+
+struct stm32mp1_ddrctrl_reg {
+	u32 mstr;
+	u32 mrctrl0;
+	u32 mrctrl1;
+	u32 derateen;
+	u32 derateint;
+	u32 pwrctl;
+	u32 pwrtmg;
+	u32 hwlpctl;
+	u32 rfshctl0;
+	u32 rfshctl3;
+	u32 crcparctl0;
+	u32 zqctl0;
+	u32 dfitmg0;
+	u32 dfitmg1;
+	u32 dfilpcfg0;
+	u32 dfiupd0;
+	u32 dfiupd1;
+	u32 dfiupd2;
+	u32 dfiphymstr;
+	u32 odtmap;
+	u32 dbg0;
+	u32 dbg1;
+	u32 dbgcmd;
+	u32 poisoncfg;
+	u32 pccfg;
+
+};
+
+struct stm32mp1_ddrctrl_timing {
+	u32 rfshtmg;
+	u32 dramtmg0;
+	u32 dramtmg1;
+	u32 dramtmg2;
+	u32 dramtmg3;
+	u32 dramtmg4;
+	u32 dramtmg5;
+	u32 dramtmg6;
+	u32 dramtmg7;
+	u32 dramtmg8;
+	u32 dramtmg14;
+	u32 odtcfg;
+};
+
+struct stm32mp1_ddrctrl_map {
+	u32 addrmap1;
+	u32 addrmap2;
+	u32 addrmap3;
+	u32 addrmap4;
+	u32 addrmap5;
+	u32 addrmap6;
+	u32 addrmap9;
+	u32 addrmap10;
+	u32 addrmap11;
+};
+
+struct stm32mp1_ddrctrl_perf {
+	u32 sched;
+	u32 sched1;
+	u32 perfhpr1;
+	u32 perflpr1;
+	u32 perfwr1;
+	u32 pcfgr_0;
+	u32 pcfgw_0;
+	u32 pcfgqos0_0;
+	u32 pcfgqos1_0;
+	u32 pcfgwqos0_0;
+	u32 pcfgwqos1_0;
+	u32 pcfgr_1;
+	u32 pcfgw_1;
+	u32 pcfgqos0_1;
+	u32 pcfgqos1_1;
+	u32 pcfgwqos0_1;
+	u32 pcfgwqos1_1;
+};
+
+struct stm32mp1_ddrphy_reg {
+	u32 pgcr;
+	u32 aciocr;
+	u32 dxccr;
+	u32 dsgcr;
+	u32 dcr;
+	u32 odtcr;
+	u32 zq0cr1;
+	u32 dx0gcr;
+	u32 dx1gcr;
+	u32 dx2gcr;
+	u32 dx3gcr;
+};
+
+struct stm32mp1_ddrphy_timing {
+	u32 ptr0;
+	u32 ptr1;
+	u32 ptr2;
+	u32 dtpr0;
+	u32 dtpr1;
+	u32 dtpr2;
+	u32 mr0;
+	u32 mr1;
+	u32 mr2;
+	u32 mr3;
+};
+
+struct stm32mp1_ddrphy_cal {
+	u32 dx0dllcr;
+	u32 dx0dqtr;
+	u32 dx0dqstr;
+	u32 dx1dllcr;
+	u32 dx1dqtr;
+	u32 dx1dqstr;
+	u32 dx2dllcr;
+	u32 dx2dqtr;
+	u32 dx2dqstr;
+	u32 dx3dllcr;
+	u32 dx3dqtr;
+	u32 dx3dqstr;
+};
+
+struct stm32mp1_ddr_info {
+	const char *name;
+	u16 speed; /* in MHZ */
+	u32 size;  /* memory size in byte = col * row * width */
+};
+
+struct stm32mp1_ddr_config {
+	struct stm32mp1_ddr_info info;
+	struct stm32mp1_ddrctrl_reg c_reg;
+	struct stm32mp1_ddrctrl_timing c_timing;
+	struct stm32mp1_ddrctrl_map c_map;
+	struct stm32mp1_ddrctrl_perf c_perf;
+	struct stm32mp1_ddrphy_reg p_reg;
+	struct stm32mp1_ddrphy_timing p_timing;
+	struct stm32mp1_ddrphy_cal p_cal;
+};
+
+int stm32mp1_ddr_clk_enable(struct ddr_info *priv, u16 mem_speed);
+void stm32mp1_ddrphy_init(struct stm32mp1_ddrphy *phy, u32 pir);
+void stm32mp1_refresh_disable(struct stm32mp1_ddrctl *ctl);
+void stm32mp1_refresh_restore(struct stm32mp1_ddrctl *ctl,
+			      u32 rfshctl3,
+			      u32 pwrctl);
+
+void stm32mp1_ddr_init(
+	struct ddr_info *priv,
+	const struct stm32mp1_ddr_config *config);
+
+int stm32mp1_dump_reg(const struct ddr_info *priv,
+		      const char *name);
+
+void stm32mp1_edit_reg(const struct ddr_info *priv,
+		       char *name,
+		       char *string);
+
+int stm32mp1_dump_param(const struct stm32mp1_ddr_config *config,
+			const char *name);
+
+void stm32mp1_edit_param(const struct stm32mp1_ddr_config *config,
+			 char *name,
+			 char *string);
+
+void stm32mp1_dump_info(
+	const struct ddr_info *priv,
+	const struct stm32mp1_ddr_config *config);
+
+bool stm32mp1_ddr_interactive(
+	void *priv,
+	enum stm32mp1_ddr_interact_step step,
+	const struct stm32mp1_ddr_config *config);
+
+#endif
diff --git a/drivers/ram/stm32mp1/stm32mp1_ddr_regs.h b/drivers/ram/stm32mp1/stm32mp1_ddr_regs.h
new file mode 100644
index 0000000000..82c254b50d
--- /dev/null
+++ b/drivers/ram/stm32mp1/stm32mp1_ddr_regs.h
@@ -0,0 +1,365 @@
+/*
+ * Copyright (C) 2018, STMicroelectronics - All Rights Reserved
+ *
+ * SPDX-License-Identifier:	GPL-2.0+	BSD-3-Clause
+ */
+
+#ifndef _RAM_STM32MP1_DDR_REGS_H
+#define _RAM_STM32MP1_DDR_REGS_H
+
+/* DDR3/LPDDR2/LPDDR3 Controller (DDRCTRL) registers */
+struct stm32mp1_ddrctl {
+	u32 mstr ;		/* 0x0 Master*/
+	u32 stat;		/* 0x4 Operating Mode Status*/
+	u8 reserved008[0x10 - 0x8];
+	u32 mrctrl0;		/* 0x10 Control 0.*/
+	u32 mrctrl1;		/* 0x14 Control 1*/
+	u32 mrstat;		/* 0x18 Status*/
+	u32 reserved01c;	/* 0x1c */
+	u32 derateen;		/* 0x20 Temperature Derate Enable*/
+	u32 derateint;		/* 0x24 Temperature Derate Interval*/
+	u8 reserved028[0x30 - 0x28];
+	u32 pwrctl;		/* 0x30 Low Power Control*/
+	u32 pwrtmg;		/* 0x34 Low Power Timing*/
+	u32 hwlpctl;		/* 0x38 Hardware Low Power Control*/
+	u8 reserved03c[0x50 - 0x3C];
+	u32 rfshctl0;		/* 0x50 Refresh Control 0*/
+	u32 reserved054;	/* 0x54 Refresh Control 1*/
+	u32 reserved058;	/* 0x58 Refresh Control 2*/
+	u32 reserved05C;
+	u32 rfshctl3;		/* 0x60 Refresh Control 0*/
+	u32 rfshtmg;		/* 0x64 Refresh Timing*/
+	u8 reserved068[0xc0 - 0x68];
+	u32 crcparctl0;		/* 0xc0 CRC Parity Control0*/
+	u32 reserved0c4;	/* 0xc4 CRC Parity Control1*/
+	u32 reserved0c8;	/* 0xc8 CRC Parity Control2*/
+	u32 crcparstat;		/* 0xcc CRC Parity Status*/
+	u32 init0;		/* 0xd0 SDRAM Initialization 0*/
+	u32 init1;		/* 0xd4 SDRAM Initialization 1*/
+	u32 init2;		/* 0xd8 SDRAM Initialization 2*/
+	u32 init3;		/* 0xdc SDRAM Initialization 3*/
+	u32 init4;		/* 0xe0 SDRAM Initialization 4*/
+	u32 init5;		/* 0xe4 SDRAM Initialization 5*/
+	u32 reserved0e8;
+	u32 reserved0ec;
+	u32 dimmctl;		/* 0xf0 DIMM Control*/
+	u8 reserved0f4[0x100 - 0xf4];
+	u32 dramtmg0;		/* 0x100 SDRAM Timing 0*/
+	u32 dramtmg1;		/* 0x104 SDRAM Timing 1*/
+	u32 dramtmg2;		/* 0x108 SDRAM Timing 2*/
+	u32 dramtmg3;		/* 0x10c SDRAM Timing 3*/
+	u32 dramtmg4;		/* 0x110 SDRAM Timing 4*/
+	u32 dramtmg5;		/* 0x114 SDRAM Timing 5*/
+	u32 dramtmg6;		/* 0x118 SDRAM Timing 6*/
+	u32 dramtmg7;		/* 0x11c SDRAM Timing 7*/
+	u32 dramtmg8;		/* 0x120 SDRAM Timing 8*/
+	u8 reserved124[0x138 - 0x124];
+	u32 dramtmg14;		/* 0x138 SDRAM Timing 14*/
+	u32 dramtmg15;		/* 0x13C SDRAM Timing 15*/
+	u8 reserved140[0x180 - 0x140];
+	u32 zqctl0;		/* 0x180 ZQ Control 0*/
+	u32 zqctl1;		/* 0x184 ZQ Control 1*/
+	u32 zqctl2;		/* 0x188 ZQ Control 2*/
+	u32 zqstat;		/* 0x18c ZQ Status*/
+	u32 dfitmg0;		/* 0x190 DFI Timing 0*/
+	u32 dfitmg1;		/* 0x194 DFI Timing 1*/
+	u32 dfilpcfg0;		/* 0x198 DFI Low Power Configuration 0*/
+	u32 reserved19c;
+	u32 dfiupd0;		/* 0x1a0 DFI Update 0*/
+	u32 dfiupd1;		/* 0x1a4 DFI Update 1*/
+	u32 dfiupd2;		/* 0x1a8 DFI Update 2*/
+	u32 reserved1ac;
+	u32 dfimisc;		/* 0x1b0 DFI Miscellaneous Control*/
+	u8 reserved1b4[0x1bc - 0x1b4];
+	u32 dfistat;		/* 0x1bc DFI Miscellaneous Control*/
+	u8 reserved1c0[0x1c4 - 0x1c0];
+	u32 dfiphymstr;		/* 0x1c4 DFI PHY Master interface*/
+	u8 reserved1c8[0x204 - 0x1c8];
+	u32 addrmap1;		/* 0x204 Address Map 1*/
+	u32 addrmap2;		/* 0x208 Address Map 2*/
+	u32 addrmap3;		/* 0x20c Address Map 3*/
+	u32 addrmap4;		/* 0x210 Address Map 4*/
+	u32 addrmap5;		/* 0x214 Address Map 5*/
+	u32 addrmap6;		/* 0x218 Address Map 6*/
+	u8 reserved21c[0x224 - 0x21c];
+	u32 addrmap9;		/* 0x224 Address Map 9*/
+	u32 addrmap10;		/* 0x228 Address Map 10*/
+	u32 addrmap11;		/* 0x22C Address Map 11*/
+	u8 reserved230[0x240 - 0x230];
+	u32 odtcfg;		/* 0x240 ODT Configuration*/
+	u32 odtmap;		/* 0x244 ODT/Rank Map*/
+	u8 reserved248[0x250 - 0x248];
+	u32 sched;		/* 0x250 Scheduler Control*/
+	u32 sched1;		/* 0x254 Scheduler Control 1*/
+	u32 reserved258;
+	u32 perfhpr1;		/* 0x25c High Priority Read CAM 1*/
+	u32 reserved260;
+	u32 perflpr1;		/* 0x264 Low Priority Read CAM 1*/
+	u32 reserved268;
+	u32 perfwr1;		/* 0x26c Write CAM 1*/
+	u8 reserved27c[0x300 - 0x270];
+	u32 dbg0;		/* 0x300 Debug 0*/
+	u32 dbg1;		/* 0x304 Debug 1*/
+	u32 dbgcam;		/* 0x308 CAM Debug*/
+	u32 dbgcmd;		/* 0x30c Command Debug*/
+	u32 dbgstat;		/* 0x310 Status Debug*/
+	u8 reserved314[0x320 - 0x314];
+	u32 swctl;		/* 0x320 Software Programming Control Enable*/
+	u32 swstat;		/* 0x324 Software Programming Control Status*/
+	u8 reserved328[0x36c - 0x328];
+	u32 poisoncfg;		/* 0x36c AXI Poison Configuration Register*/
+	u32 poisonstat;		/* 0x370 AXI Poison Status Register*/
+	u8 reserved374[0x3fc - 0x374];
+
+	/* Multi Port registers */
+	u32 pstat;		/* 0x3fc Port Status*/
+	u32 pccfg;		/* 0x400 Port Common Configuration*/
+
+	/* PORT 0 */
+	u32 pcfgr_0;		/* 0x404 Configuration Read*/
+	u32 pcfgw_0;		/* 0x408 Configuration Write*/
+	u8 reserved40c[0x490 - 0x40c];
+	u32 pctrl_0;		/* 0x490 Port Control Register */
+	u32 pcfgqos0_0;		/* 0x494 Read QoS Configuration 0*/
+	u32 pcfgqos1_0;		/* 0x498 Read QoS Configuration 1*/
+	u32 pcfgwqos0_0;	/* 0x49c Write QoS Configuration 0*/
+	u32 pcfgwqos1_0;	/* 0x4a0 Write QoS Configuration 1*/
+	u8 reserved4a4[0x4b4 - 0x4a4];
+
+	/* PORT 1 */
+	u32 pcfgr_1;		/* 0x4b4 Configuration Read*/
+	u32 pcfgw_1;		/* 0x4b8 Configuration Write*/
+	u8 reserved4bc[0x540 - 0x4bc];
+	u32 pctrl_1;		/* 0x540 Port 2 Control Register */
+	u32 pcfgqos0_1;		/* 0x544 Read QoS Configuration 0*/
+	u32 pcfgqos1_1;		/* 0x548 Read QoS Configuration 1*/
+	u32 pcfgwqos0_1;	/* 0x54c Write QoS Configuration 0*/
+	u32 pcfgwqos1_1;	/* 0x550 Write QoS Configuration 1*/
+};
+
+/* DDR Physical Interface Control (DDRPHYC) registers*/
+struct stm32mp1_ddrphy {
+	u32 ridr;		/* 0x00 R Revision Identification*/
+	u32 pir;		/* 0x04 R/W PHY Initialization*/
+	u32 pgcr;		/* 0x08 R/W PHY General Configuration*/
+	u32 pgsr;		/* 0x0C PHY General Status*/
+	u32 dllgcr;		/* 0x10 R/W DLL General Control*/
+	u32 acdllcr;		/* 0x14 R/W AC DLL Control*/
+	u32 ptr0;		/* 0x18 R/W PHY Timing 0*/
+	u32 ptr1;		/* 0x1C R/W PHY Timing 1*/
+	u32 ptr2;		/* 0x20 R/W PHY Timing 2*/
+	u32 aciocr;		/* 0x24 AC I/O Configuration*/
+	u32 dxccr;		/* 0x28 DATX8 Common Configuration*/
+	u32 dsgcr;		/* 0x2C DDR System General Configuration*/
+	u32 dcr;		/* 0x30 DRAM Configuration*/
+	u32 dtpr0;		/* 0x34 DRAM Timing Parameters0*/
+	u32 dtpr1;		/* 0x38 DRAM Timing Parameters1*/
+	u32 dtpr2;		/* 0x3C DRAM Timing Parameters2*/
+	u32 mr0;		/* 0x40 Mode 0*/
+	u32 mr1;		/* 0x44 Mode 1*/
+	u32 mr2;		/* 0x48 Mode 2*/
+	u32 mr3;		/* 0x4C Mode 3*/
+	u32 odtcr;		/* 0x50 ODT Configuration*/
+	u32 dtar;		/* 0x54 data training address*/
+	u32 dtdr0;		/* 0x58 */
+	u32 dtdr1;		/* 0x5c */
+	u8 res1[0x0c0 - 0x060];	/* 0x60 */
+	u32 dcuar;		/* 0xc0 Address*/
+	u32 dcudr;		/* 0xc4 DCU Data*/
+	u32 dcurr;		/* 0xc8 DCU Run*/
+	u32 dculr;		/* 0xcc DCU Loop*/
+	u32 dcugcr;		/* 0xd0 DCU General Configuration*/
+	u32 dcutpr;		/* 0xd4 DCU Timing Parameters */
+	u32 dcusr0;		/* 0xd8 DCU Status 0*/
+	u32 dcusr1;		/* 0xdc DCU Status 1*/
+	u8 res2[0x100 - 0xe0];	/* 0xe0 */
+	u32 bistrr;		/* 0x100 BIST Run*/
+	u32 bistmskr0;		/* 0x104 BIST Mask 0*/
+	u32 bistmskr1;		/* 0x108 BIST Mask 0*/
+	u32 bistwcr;		/* 0x10c BIST Word Count*/
+	u32 bistlsr;		/* 0x110 BIST LFSR Seed*/
+	u32 bistar0;		/* 0x114 BIST Address 0*/
+	u32 bistar1;		/* 0x118 BIST Address 1*/
+	u32 bistar2;		/* 0x11c BIST Address 2*/
+	u32 bistupdr;		/* 0x120 BIST User Data Pattern*/
+	u32 bistgsr;		/* 0x124 BIST General Status*/
+	u32 bistwer;		/* 0x128 BIST Word Error*/
+	u32 bistber0;		/* 0x12c BIST Bit Error 0*/
+	u32 bistber1;		/* 0x130 BIST Bit Error 1*/
+	u32 bistber2;		/* 0x134 BIST Bit Error 2*/
+	u32 bistwcsr;		/* 0x138 BIST Word Count Status*/
+	u32 bistfwr0;		/* 0x13c BIST Fail Word 0*/
+	u32 bistfwr1;		/* 0x140 BIST Fail Word 1*/
+	u8 res3[0x178 - 0x144];	/* 0x144 */
+	u32 gpr0;		/* 0x178 General Purpose 0 (GPR0)*/
+	u32 gpr1;		/* 0x17C General Purpose 1 (GPR1)*/
+	u32 zq0cr0;		/* 0x180 zq 0 control 0 */
+	u32 zq0cr1;		/* 0x184 zq 0 control 1 */
+	u32 zq0sr0;		/* 0x188 zq 0 status 0 */
+	u32 zq0sr1;		/* 0x18C zq 0 status 1 */
+	u8 res4[0x1C0 - 0x190];	/* 0x190 */
+	u32 dx0gcr;		/* 0x1c0 Byte lane 0 General Configuration*/
+	u32 dx0gsr0;		/* 0x1c4 Byte lane 0 General Status 0*/
+	u32 dx0gsr1;		/* 0x1c8 Byte lane 0 General Status 1*/
+	u32 dx0dllcr;		/* 0x1cc Byte lane 0 DLL Control*/
+	u32 dx0dqtr;		/* 0x1d0 Byte lane 0 DQ Timing*/
+	u32 dx0dqstr;		/* 0x1d4 Byte lane 0 DQS Timing*/
+	u8 res5[0x200 - 0x1d8];	/* 0x1d8 */
+	u32 dx1gcr;		/* 0x200 Byte lane 1 General Configuration*/
+	u32 dx1gsr0;		/* 0x204 Byte lane 1 General Status 0*/
+	u32 dx1gsr1;		/* 0x208 Byte lane 1 General Status 1*/
+	u32 dx1dllcr;		/* 0x20c Byte lane 1 DLL Control*/
+	u32 dx1dqtr;		/* 0x210 Byte lane 1 DQ Timing*/
+	u32 dx1dqstr;		/* 0x214 Byte lane 1 QS Timing*/
+	u8 res6[0x240 - 0x218];	/* 0x218 */
+	u32 dx2gcr;		/* 0x240 Byte lane 2 General Configuration*/
+	u32 dx2gsr0;		/* 0x244 Byte lane 2 General Status 0*/
+	u32 dx2gsr1;		/* 0x248 Byte lane 2 General Status 1*/
+	u32 dx2dllcr;		/* 0x24c Byte lane 2 DLL Control*/
+	u32 dx2dqtr;		/* 0x250 Byte lane 2 DQ Timing*/
+	u32 dx2dqstr;		/* 0x254 Byte lane 2 QS Timing*/
+	u8 res7[0x280 - 0x258];	/* 0x258 */
+	u32 dx3gcr;		/* 0x280 Byte lane 3 General Configuration*/
+	u32 dx3gsr0;		/* 0x284 Byte lane 3 General Status 0*/
+	u32 dx3gsr1;		/* 0x288 Byte lane 3 General Status 1*/
+	u32 dx3dllcr;		/* 0x28c Byte lane 3 DLL Control*/
+	u32 dx3dqtr;		/* 0x290 Byte lane 3 DQ Timing*/
+	u32 dx3dqstr;		/* 0x294 Byte lane 3 QS Timing*/
+};
+
+#define DXN(phy, offset, byte)	((u32)(phy) + (offset) + ((u32)(byte) * 0x40))
+#define DXNGCR(phy, byte)	DXN(phy, 0x1c0, byte)
+#define DXNDLLCR(phy, byte)	DXN(phy, 0x1cc, byte)
+#define DXNDQTR(phy, byte)	DXN(phy, 0x1d0, byte)
+#define DXNDQSTR(phy, byte)	DXN(phy, 0x1d4, byte)
+
+/* DDRCTRL REGISTERS */
+#define DDRCTRL_MSTR_DDR3			BIT(0)
+#define DDRCTRL_MSTR_DATA_BUS_WIDTH_MASK	GENMASK(13, 12)
+#define DDRCTRL_MSTR_DATA_BUS_WIDTH_FULL	(0 << 12)
+#define DDRCTRL_MSTR_DATA_BUS_WIDTH_HALF	(1 << 12)
+#define DDRCTRL_MSTR_DATA_BUS_WIDTH_QUARTER	(2 << 12)
+#define DDRCTRL_MSTR_DLL_OFF_MODE		BIT(15)
+
+#define DDRCTRL_STAT_OPERATING_MODE_MASK	GENMASK(2, 0)
+#define DDRCTRL_STAT_OPERATING_MODE_NORMAL	1
+#define DDRCTRL_STAT_OPERATING_MODE_SR		3
+#define DDRCTRL_STAT_SELFREF_TYPE_MASK		GENMASK(5, 4)
+#define DDRCTRL_STAT_SELFREF_TYPE_ASR		(3 << 4)
+#define DDRCTRL_STAT_SELFREF_TYPE_SR		(2 << 4)
+
+#define DDRCTRL_MRCTRL0_MR_TYPE_WRITE		0
+/* only one rank supported */
+#define DDRCTRL_MRCTRL0_MR_RANK_SHIFT		4
+#define DDRCTRL_MRCTRL0_MR_RANK_ALL \
+		(0x1 << DDRCTRL_MRCTRL0_MR_RANK_SHIFT)
+#define DDRCTRL_MRCTRL0_MR_ADDR_SHIFT		12
+#define DDRCTRL_MRCTRL0_MR_ADDR_MASK		GENMASK(15, 12)
+#define DDRCTRL_MRCTRL0_MR_WR			BIT(31)
+
+#define DDRCTRL_MRSTAT_MR_WR_BUSY		BIT(0)
+
+#define DDRCTRL_PWRCTL_POWERDOWN_EN		BIT(1)
+#define DDRCTRL_PWRCTL_SELFREF_SW		BIT(5)
+
+#define DDRCTRL_RFSHCTL3_DIS_AUTO_REFRESH	BIT(0)
+
+#define DDRCTRL_RFSHTMG_T_RFC_NOM_X1_X32_MASK	GENMASK(27, 16)
+#define DDRCTRL_RFSHTMG_T_RFC_NOM_X1_X32_SHIFT	16
+
+#define DDRCTRL_INIT0_SKIP_DRAM_INIT_MASK	(0xC0000000)
+#define DDRCTRL_INIT0_SKIP_DRAM_INIT_NORMAL	(BIT(30))
+
+#define DDRCTRL_DFIMISC_DFI_INIT_COMPLETE_EN	BIT(0)
+
+#define DDRCTRL_DBG1_DIS_HIF			BIT(1)
+
+#define DDRCTRL_DBGCAM_WR_DATA_PIPELINE_EMPTY	BIT(29)
+#define DDRCTRL_DBGCAM_RD_DATA_PIPELINE_EMPTY	BIT(28)
+#define DDRCTRL_DBGCAM_DBG_WR_Q_EMPTY		BIT(26)
+#define DDRCTRL_DBGCAM_DBG_LPR_Q_DEPTH		GENMASK(12, 8)
+#define DDRCTRL_DBGCAM_DBG_HPR_Q_DEPTH		GENMASK(4, 0)
+#define DDRCTRL_DBGCAM_DATA_PIPELINE_EMPTY \
+		(DDRCTRL_DBGCAM_WR_DATA_PIPELINE_EMPTY | \
+		 DDRCTRL_DBGCAM_RD_DATA_PIPELINE_EMPTY)
+#define DDRCTRL_DBGCAM_DBG_Q_DEPTH \
+		(DDRCTRL_DBGCAM_DBG_WR_Q_EMPTY | \
+		 DDRCTRL_DBGCAM_DBG_LPR_Q_DEPTH | \
+		 DDRCTRL_DBGCAM_DBG_HPR_Q_DEPTH)
+
+#define DDRCTRL_DBGCMD_RANK0_REFRESH		BIT(0)
+
+#define DDRCTRL_DBGSTAT_RANK0_REFRESH_BUSY	BIT(0)
+
+#define DDRCTRL_SWCTL_SW_DONE			BIT(0)
+
+#define DDRCTRL_SWSTAT_SW_DONE_ACK		BIT(0)
+
+#define DDRCTRL_PCTRL_N_PORT_EN			BIT(0)
+
+/* DDRPHYC registers */
+#define DDRPHYC_PIR_INIT			BIT(0)
+#define DDRPHYC_PIR_DLLSRST			BIT(1)
+#define DDRPHYC_PIR_DLLLOCK			BIT(2)
+#define DDRPHYC_PIR_ZCAL			BIT(3)
+#define DDRPHYC_PIR_ITMSRST			BIT(4)
+#define DDRPHYC_PIR_DRAMRST			BIT(5)
+#define DDRPHYC_PIR_DRAMINIT			BIT(6)
+#define DDRPHYC_PIR_QSTRN			BIT(7)
+#define DDRPHYC_PIR_ICPC			BIT(16)
+#define DDRPHYC_PIR_ZCALBYP			BIT(30)
+#define DDRPHYC_PIR_INITSTEPS_MASK		GENMASK(31, 7)
+
+#define DDRPHYC_PGCR_DFTCMP			BIT(2)
+#define DDRPHYC_PGCR_PDDISDX			BIT(24)
+#define DDRPHYC_PGCR_RFSHDT_MASK		GENMASK(28, 25)
+
+#define DDRPHYC_PGSR_IDONE			BIT(0)
+#define DDRPHYC_PGSR_DTERR			BIT(5)
+#define DDRPHYC_PGSR_DTIERR			BIT(6)
+#define DDRPHYC_PGSR_DFTERR			BIT(7)
+#define DDRPHYC_PGSR_RVERR			BIT(8)
+#define DDRPHYC_PGSR_RVEIRR			BIT(9)
+
+#define DDRPHYC_DLLGCR_BPS200			BIT(23)
+
+#define DDRPHYC_ACDLLCR_DLLDIS			BIT(31)
+
+#define DDRPHYC_ZQ0CRN_ZDATA_MASK		GENMASK(27, 0)
+#define DDRPHYC_ZQ0CRN_ZDATA_SHIFT		0
+#define DDRPHYC_ZQ0CRN_ZDEN			BIT(28)
+
+#define DDRPHYC_DXNGCR_DXEN			BIT(0)
+
+#define DDRPHYC_DXNDLLCR_DLLDIS			BIT(31)
+#define DDRPHYC_DXNDLLCR_SDPHASE_MASK		GENMASK(17, 14)
+#define DDRPHYC_DXNDLLCR_SDPHASE_SHIFT		14
+
+#define DDRPHYC_DXNDQTR_DQDLY_SHIFT(bit)	(4 * (bit))
+#define DDRPHYC_DXNDQTR_DQDLY_MASK		GENMASK(3, 0)
+#define DDRPHYC_DXNDQTR_DQDLY_LOW_MASK		GENMASK(1, 0)
+#define DDRPHYC_DXNDQTR_DQDLY_HIGH_MASK		GENMASK(3, 2)
+
+#define DDRPHYC_DXNDQSTR_DQSDLY_MASK		GENMASK(22, 20)
+#define DDRPHYC_DXNDQSTR_DQSDLY_SHIFT		20
+#define DDRPHYC_DXNDQSTR_DQSNDLY_MASK		GENMASK(25, 23)
+#define DDRPHYC_DXNDQSTR_DQSNDLY_SHIFT		23
+#define DDRPHYC_DXNDQSTR_R0DGSL_MASK		GENMASK(2, 0)
+#define DDRPHYC_DXNDQSTR_R0DGSL_SHIFT		0
+#define DDRPHYC_DXNDQSTR_R0DGPS_MASK		GENMASK(13, 12)
+#define DDRPHYC_DXNDQSTR_R0DGPS_SHIFT		12
+
+#define DDRPHYC_BISTRR_BDXSEL_MASK		GENMASK(22, 19)
+#define DDRPHYC_BISTRR_BDXSEL_SHIFT		19
+
+#define DDRPHYC_BISTGSR_BDDONE			BIT(0)
+#define DDRPHYC_BISTGSR_BDXERR			BIT(2)
+
+#define DDRPHYC_BISTWCSR_DXWCNT_SHIFT		16
+
+/* PWR registers */
+#define PWR_CR3					0x00C
+#define PWR_CR3_DDRSRDIS			BIT(11)
+#define PWR_CR3_DDRRETEN			BIT(12)
+
+#endif
diff --git a/drivers/ram/stm32mp1/stm32mp1_ram.c b/drivers/ram/stm32mp1/stm32mp1_ram.c
new file mode 100644
index 0000000000..9599444650
--- /dev/null
+++ b/drivers/ram/stm32mp1/stm32mp1_ram.c
@@ -0,0 +1,197 @@
+/*
+ * Copyright (C) 2018, STMicroelectronics - All Rights Reserved
+ *
+ * SPDX-License-Identifier:	GPL-2.0+	BSD-3-Clause
+ */
+
+#include <common.h>
+#include <clk.h>
+#include <dm.h>
+#include <ram.h>
+#include <regmap.h>
+#include <syscon.h>
+#include <asm/io.h>
+#include "stm32mp1_ddr.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static const char *const clkname[] = {
+	"ddrc1",
+	"ddrc2",
+	"ddrcapb",
+	"ddrphycapb",
+	"ddrphyc" /* LAST clock => used for get_rate() */
+};
+
+int stm32mp1_ddr_clk_enable(struct ddr_info *priv, uint16_t mem_speed)
+{
+	unsigned long ddrphy_clk;
+	unsigned long ddr_clk;
+	struct clk clk;
+	int ret;
+	int idx;
+
+	for (idx = 0; idx < ARRAY_SIZE(clkname); idx++) {
+		ret = clk_get_by_name(priv->dev, clkname[idx], &clk);
+
+		if (!ret)
+			ret = clk_enable(&clk);
+
+		if (ret) {
+			printf("error for %s : %d\n", clkname[idx], ret);
+			return ret;
+		}
+	}
+
+	priv->clk = clk;
+	ddrphy_clk = clk_get_rate(&priv->clk);
+
+	debug("DDR: mem_speed (%d MHz), RCC %d MHz\n",
+	      mem_speed, (u32)(ddrphy_clk / 1000 / 1000));
+	/* max 10% frequency delta */
+	ddr_clk = abs(ddrphy_clk - mem_speed * 1000 * 1000);
+	if (ddr_clk > (mem_speed * 1000 * 100)) {
+		pr_err("DDR expected freq %d MHz, current is %d MHz\n",
+		       mem_speed, (u32)(ddrphy_clk / 1000 / 1000));
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static __maybe_unused int stm32mp1_ddr_setup(struct udevice *dev)
+{
+	struct ddr_info *priv = dev_get_priv(dev);
+	int ret, idx;
+	struct clk axidcg;
+	struct stm32mp1_ddr_config config;
+
+#define PARAM(x, y) \
+	{ x,\
+	  offsetof(struct stm32mp1_ddr_config, y),\
+	  sizeof(config.y) / sizeof(u32)}
+
+#define CTL_PARAM(x) PARAM("st,ctl-"#x, c_##x)
+#define PHY_PARAM(x) PARAM("st,phy-"#x, p_##x)
+
+	const struct {
+		const char *name; /* name in DT */
+		const u32 offset; /* offset in config struct */
+		const u32 size;   /* size of parameters */
+	} param[] = {
+		CTL_PARAM(reg),
+		CTL_PARAM(timing),
+		CTL_PARAM(map),
+		CTL_PARAM(perf),
+		PHY_PARAM(reg),
+		PHY_PARAM(timing),
+		PHY_PARAM(cal)
+	};
+
+	config.info.speed = dev_read_u32_default(dev, "st,mem-speed", 0);
+	config.info.size = dev_read_u32_default(dev, "st,mem-size", 0);
+	config.info.name = dev_read_string(dev, "st,mem-name");
+	if (!config.info.name) {
+		debug("%s: no st,mem-name\n", __func__);
+		return -EINVAL;
+	}
+	printf("RAM: %s\n", config.info.name);
+
+	for (idx = 0; idx < ARRAY_SIZE(param); idx++) {
+		ret = dev_read_u32_array(dev, param[idx].name,
+					 (void *)((u32)&config +
+						  param[idx].offset),
+					 param[idx].size);
+		debug("%s: %s[0x%x] = %d\n", __func__,
+		      param[idx].name, param[idx].size, ret);
+		if (ret) {
+			pr_err("%s: Cannot read %s\n",
+			       __func__, param[idx].name);
+			return -EINVAL;
+		}
+	}
+
+	ret = clk_get_by_name(dev, "axidcg", &axidcg);
+	if (ret) {
+		debug("%s: Cannot found axidcg\n", __func__);
+		return -EINVAL;
+	}
+	clk_disable(&axidcg); /* disable clock gating during init */
+
+	stm32mp1_ddr_init(priv, &config);
+
+	clk_enable(&axidcg); /* enable clock gating */
+
+	/* check size */
+	debug("%s : get_ram_size(%x, %x)\n", __func__,
+	      (u32)priv->info.base, (u32)STM32_DDR_SIZE);
+
+	priv->info.size = get_ram_size((long *)priv->info.base,
+				       STM32_DDR_SIZE);
+
+	debug("%s : %x\n", __func__, (u32)priv->info.size);
+
+	/* check memory access for all memory */
+	if (config.info.size != priv->info.size) {
+		printf("DDR invalid size : 0x%x, expected 0x%x\n",
+		       priv->info.size, config.info.size);
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int stm32mp1_ddr_probe(struct udevice *dev)
+{
+	struct ddr_info *priv = dev_get_priv(dev);
+	struct regmap *map;
+	int ret;
+
+	debug("STM32MP1 DDR probe\n");
+	priv->dev = dev;
+
+	ret = regmap_init_mem(dev, &map);
+	if (ret)
+		return ret;
+
+	priv->ctl = regmap_get_range(map, 0);
+	priv->phy = regmap_get_range(map, 1);
+
+	priv->rcc = STM32_RCC_BASE;
+
+	priv->info.base = STM32_DDR_BASE;
+
+#if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD)
+	priv->info.size = 0;
+	return stm32mp1_ddr_setup(dev);
+#else
+	priv->info.size = dev_read_u32_default(dev, "st,mem-size", 0);
+	return 0;
+#endif
+}
+
+static int stm32mp1_ddr_get_info(struct udevice *dev, struct ram_info *info)
+{
+	struct ddr_info *priv = dev_get_priv(dev);
+
+	*info = priv->info;
+
+	return 0;
+}
+
+static struct ram_ops stm32mp1_ddr_ops = {
+	.get_info = stm32mp1_ddr_get_info,
+};
+
+static const struct udevice_id stm32mp1_ddr_ids[] = {
+	{ .compatible = "st,stm32mp1-ddr" },
+	{ }
+};
+
+U_BOOT_DRIVER(ddr_stm32mp1) = {
+	.name = "stm32mp1_ddr",
+	.id = UCLASS_RAM,
+	.of_match = stm32mp1_ddr_ids,
+	.ops = &stm32mp1_ddr_ops,
+	.probe = stm32mp1_ddr_probe,
+	.priv_auto_alloc_size = sizeof(struct ddr_info),
+};