summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorVagrant Cascadian <vagrant@debian.org>2016-04-30 19:18:00 -0700
committerTom Rini <trini@konsulko.com>2016-05-02 18:37:09 -0400
commiteae4b2b67bc8c68e2440616a447ca6c6898ad188 (patch)
treeae51716b64a81b720d9513c5e33262c0d0a88e57
parent09c2b8f3e39925e5bdff12cb90add09bc9e117d4 (diff)
Fix spelling of "occurred".
Signed-off-by: Vagrant Cascadian <vagrant@debian.org> Reviewed-by: Simon Glass <sjg@chromium.org>
-rw-r--r--board/bf533-ezkit/flash.c2
-rw-r--r--board/mpl/pip405/pip405.c2
-rw-r--r--board/tqc/tqm5200/cmd_stk52xx.c2
-rw-r--r--cmd/fdc.c8
-rw-r--r--common/kgdb.c2
-rw-r--r--common/usb_hub.c2
-rw-r--r--drivers/ddr/marvell/a38x/ddr3_init.h2
-rw-r--r--drivers/ddr/marvell/axp/ddr3_hw_training.h2
-rw-r--r--drivers/i2c/kona_i2c.c2
-rw-r--r--drivers/mtd/nand/omap_gpmc.c4
-rw-r--r--drivers/net/4xx_enet.c4
-rw-r--r--drivers/net/enc28j60.c2
-rw-r--r--drivers/net/ne2000_base.c4
-rw-r--r--drivers/usb/gadget/mpc8xx_udc.c2
-rw-r--r--drivers/usb/musb/musb_hcd.c6
-rw-r--r--include/linux/fb.h4
-rw-r--r--include/test/ut.h12
-rw-r--r--include/usbdevice.h2
18 files changed, 32 insertions, 32 deletions
diff --git a/board/bf533-ezkit/flash.c b/board/bf533-ezkit/flash.c
index 3180a76fa6..a7b3519d95 100644
--- a/board/bf533-ezkit/flash.c
+++ b/board/bf533-ezkit/flash.c
@@ -320,7 +320,7 @@ int poll_toggle_bit(long lOffset)
}
timeout--;
}
- printf("Time out occured \n");
+ printf("Time out occurred \n");
if (timeout < 0)
return FLASH_FAIL;
}
diff --git a/board/mpl/pip405/pip405.c b/board/mpl/pip405/pip405.c
index 7c7690ff55..1bd2fbfc58 100644
--- a/board/mpl/pip405/pip405.c
+++ b/board/mpl/pip405/pip405.c
@@ -777,7 +777,7 @@ void print_pip405_info (void)
((sysman & 0x10) == 0x10) ? "" : "not ");
printf ("INIT asserts %sINT1# (NMI)\n",
((sysman & 0x20) == 0x20) ? "" : "not ");
- printf ("INIT occured %d\n", (sysman >> 6) & 0x1);
+ printf ("INIT occurred %d\n", (sysman >> 6) & 0x1);
printf ("SER1 is routed to %s\n",
((flashcom & 0x1) == 0x1) ? "RS485" : "RS232");
printf ("COM2 is routed to %s\n",
diff --git a/board/tqc/tqm5200/cmd_stk52xx.c b/board/tqc/tqm5200/cmd_stk52xx.c
index 9d2d5a8fa9..dc22ee4024 100644
--- a/board/tqc/tqm5200/cmd_stk52xx.c
+++ b/board/tqc/tqm5200/cmd_stk52xx.c
@@ -72,7 +72,7 @@ static int spi_transmit(unsigned char data)
spi->dr = data;
/* wait for SPI transmission completed */
while (!(spi->sr & 0x80)) {
- if (spi->sr & 0x40) { /* if write collision occured */
+ if (spi->sr & 0x40) { /* if write collision occurred */
int dummy;
/* do dummy read to clear status register */
diff --git a/cmd/fdc.c b/cmd/fdc.c
index 058ae89a38..d2281abbda 100644
--- a/cmd/fdc.c
+++ b/cmd/fdc.c
@@ -189,7 +189,7 @@ int wait_for_fdc_int(void)
while((read_fdc_reg(FDC_SRA)&0x80)==0) {
timeout--;
udelay(10);
- if(timeout==0) /* timeout occured */
+ if(timeout==0) /* timeout occurred */
return false;
}
return true;
@@ -205,7 +205,7 @@ int read_fdc_byte(void)
/* direction out and ready */
udelay(10);
timeout--;
- if(timeout==0) /* timeout occured */
+ if(timeout==0) /* timeout occurred */
return -1;
}
return read_fdc_reg(FDC_FIFO);
@@ -235,7 +235,7 @@ int write_fdc_byte(unsigned char val)
timeout--;
udelay(10);
fdc_need_more_output();
- if(timeout==0) /* timeout occured */
+ if(timeout==0) /* timeout occurred */
return false;
}
write_fdc_reg(FDC_FIFO,val);
@@ -395,7 +395,7 @@ int fdc_terminate(FDC_COMMAND_STRUCT *pCMD)
int i;
for(i=0;i<100;i++)
udelay(500); /* wait 500usec for fifo overrun */
- while((read_fdc_reg(FDC_SRA)&0x80)==0x00); /* wait as long as no int has occured */
+ while((read_fdc_reg(FDC_SRA)&0x80)==0x00); /* wait as long as no int has occurred */
for(i=0;i<7;i++) {
pCMD->result[i]=(unsigned char)read_fdc_byte();
}
diff --git a/common/kgdb.c b/common/kgdb.c
index d357463695..daf53bed7a 100644
--- a/common/kgdb.c
+++ b/common/kgdb.c
@@ -326,7 +326,7 @@ handle_exception (struct pt_regs *regs)
return (0);
}
- /* probably should check which exception occured as well */
+ /* probably should check which exception occurred as well */
if (longjmp_on_fault) {
longjmp_on_fault = 0;
kgdb_longjmp(error_jmp_buf, KGDBERR_MEMFAULT);
diff --git a/common/usb_hub.c b/common/usb_hub.c
index e6a2cdb6f8..4f59802d59 100644
--- a/common/usb_hub.c
+++ b/common/usb_hub.c
@@ -475,7 +475,7 @@ static int usb_scan_port(struct usb_device_scan *usb_scan)
return 0;
/* Otherwise the device will get removed */
- printf("Port %d over-current occured %d times\n", i + 1,
+ printf("Port %d over-current occurred %d times\n", i + 1,
hub->overcurrent_count[i]);
}
diff --git a/drivers/ddr/marvell/a38x/ddr3_init.h b/drivers/ddr/marvell/a38x/ddr3_init.h
index cb3fb24416..8cb08864c2 100644
--- a/drivers/ddr/marvell/a38x/ddr3_init.h
+++ b/drivers/ddr/marvell/a38x/ddr3_init.h
@@ -120,7 +120,7 @@
#define MV_NO_RESOURCE (0x13) /* Resource not available (memory ...) */
#define MV_FULL (0x14) /* Item is full (Queue or table etc...) */
#define MV_EMPTY (0x15) /* Item is empty (Queue or table etc...) */
-#define MV_INIT_ERROR (0x16) /* Error occured while INIT process */
+#define MV_INIT_ERROR (0x16) /* Error occurred while INIT process */
#define MV_HW_ERROR (0x17) /* Hardware error */
#define MV_TX_ERROR (0x18) /* Transmit operation not succeeded */
#define MV_RX_ERROR (0x19) /* Recieve operation not succeeded */
diff --git a/drivers/ddr/marvell/axp/ddr3_hw_training.h b/drivers/ddr/marvell/axp/ddr3_hw_training.h
index cffa7c4ff9..343a6b6672 100644
--- a/drivers/ddr/marvell/axp/ddr3_hw_training.h
+++ b/drivers/ddr/marvell/axp/ddr3_hw_training.h
@@ -41,7 +41,7 @@
#define MV_NO_RESOURCE (0x13) /* Resource not available (memory ...) */
#define MV_FULL (0x14) /* Item is full (Queue or table etc...) */
#define MV_EMPTY (0x15) /* Item is empty (Queue or table etc...) */
-#define MV_INIT_ERROR (0x16) /* Error occured while INIT process */
+#define MV_INIT_ERROR (0x16) /* Error occurred while INIT process */
#define MV_HW_ERROR (0x17) /* Hardware error */
#define MV_TX_ERROR (0x18) /* Transmit operation not succeeded */
#define MV_RX_ERROR (0x19) /* Recieve operation not succeeded */
diff --git a/drivers/i2c/kona_i2c.c b/drivers/i2c/kona_i2c.c
index 9af496bbb1..11f29d926d 100644
--- a/drivers/i2c/kona_i2c.c
+++ b/drivers/i2c/kona_i2c.c
@@ -381,7 +381,7 @@ static int bcm_kona_i2c_write_fifo_single(struct bcm_kona_i2c_dev *dev,
return -EREMOTEIO;
}
- /* Check if a timeout occured */
+ /* Check if a timeout occurred */
if (!time_left) {
printf("completion timed out\n");
return -EREMOTEIO;
diff --git a/drivers/mtd/nand/omap_gpmc.c b/drivers/mtd/nand/omap_gpmc.c
index 4814fa202a..6a45d28a72 100644
--- a/drivers/mtd/nand/omap_gpmc.c
+++ b/drivers/mtd/nand/omap_gpmc.c
@@ -106,7 +106,7 @@ static uint32_t gen_true_ecc(uint8_t *ecc_buf)
/*
* omap_correct_data - Compares the ecc read from nand spare area with ECC
- * registers values and corrects one bit error if it has occured
+ * registers values and corrects one bit error if it has occurred
* Further details can be had from OMAP TRM and the following selected links:
* http://en.wikipedia.org/wiki/Hamming_code
* http://www.cs.utexas.edu/users/plaxton/c/337/05f/slides/ErrorCorrection-4.pdf
@@ -479,7 +479,7 @@ static void omap_reverse_list(u8 *list, unsigned int length)
/*
* omap_correct_data_bch - Compares the ecc read from nand spare area
- * with ECC registers values and corrects one bit error if it has occured
+ * with ECC registers values and corrects one bit error if it has occurred
*
* @mtd: MTD device structure
* @dat: page data
diff --git a/drivers/net/4xx_enet.c b/drivers/net/4xx_enet.c
index 3c30f42b42..bc52ed35cc 100644
--- a/drivers/net/4xx_enet.c
+++ b/drivers/net/4xx_enet.c
@@ -1726,7 +1726,7 @@ static void mal_err (struct eth_device *dev, unsigned long isr,
mtdcr (MAL0_RXDEIR, 0x80000000);
#ifdef INFO_4XX_ENET
- printf("\nMAL error occured.... ISR = %lx UIC = = %lx MAL_DEF = %lx MAL_ERR= %lx\n",
+ printf("\nMAL error occurred.... ISR = %lx UIC = = %lx MAL_DEF = %lx MAL_ERR= %lx\n",
isr, uic, maldef, mal_errr);
#endif
@@ -1740,7 +1740,7 @@ static void emac_err (struct eth_device *dev, unsigned long isr)
{
EMAC_4XX_HW_PST hw_p = dev->priv;
- printf ("EMAC%d error occured.... ISR = %lx\n", hw_p->devnum, isr);
+ printf ("EMAC%d error occurred.... ISR = %lx\n", hw_p->devnum, isr);
out_be32((void *)EMAC0_ISR + hw_p->hw_addr, isr);
}
diff --git a/drivers/net/enc28j60.c b/drivers/net/enc28j60.c
index 59ea11cd6a..611eabb546 100644
--- a/drivers/net/enc28j60.c
+++ b/drivers/net/enc28j60.c
@@ -381,7 +381,7 @@ static int enc_phy_link_wait(enc_dev_t *enc)
udelay(1000);
}
- /* timeout occured */
+ /* timeout occurred */
printf("%s: link down\n", enc->dev->name);
return 1;
}
diff --git a/drivers/net/ne2000_base.c b/drivers/net/ne2000_base.c
index 71d133cc8f..67bf140a37 100644
--- a/drivers/net/ne2000_base.c
+++ b/drivers/net/ne2000_base.c
@@ -582,7 +582,7 @@ dp83902a_Overflow(void)
/*
* Read in as many packets as we can and acknowledge any and receive
* interrupts. Since the buffer has overflowed, a receive event of
- * some kind will have occured.
+ * some kind will have occurred.
*/
dp83902a_RxEvent();
DP_OUT(base, DP_ISR, DP_ISR_RxP|DP_ISR_RxE);
@@ -592,7 +592,7 @@ dp83902a_Overflow(void)
DP_OUT(base, DP_TCR, DP_TCR_NORMAL);
/*
- * If a transmit command was issued, but no transmit event has occured,
+ * If a transmit command was issued, but no transmit event has occurred,
* restart it here.
*/
DP_IN(base, DP_ISR, isr);
diff --git a/drivers/usb/gadget/mpc8xx_udc.c b/drivers/usb/gadget/mpc8xx_udc.c
index b3e178abef..ad5ea7a6b8 100644
--- a/drivers/usb/gadget/mpc8xx_udc.c
+++ b/drivers/usb/gadget/mpc8xx_udc.c
@@ -170,7 +170,7 @@ int udc_init (void)
/* udc_irq
*
- * Poll for whatever events may have occured
+ * Poll for whatever events may have occurred
*/
void udc_irq (void)
{
diff --git a/drivers/usb/musb/musb_hcd.c b/drivers/usb/musb/musb_hcd.c
index 9a3b61aa55..49479368d2 100644
--- a/drivers/usb/musb/musb_hcd.c
+++ b/drivers/usb/musb/musb_hcd.c
@@ -73,9 +73,9 @@ static void write_toggle(struct usb_device *dev, u8 ep, u8 dir_out)
}
/*
- * This function checks if RxStall has occured on the endpoint. If a RxStall
- * has occured, the RxStall is cleared and 1 is returned. If RxStall has
- * not occured, 0 is returned.
+ * This function checks if RxStall has occurred on the endpoint. If a RxStall
+ * has occurred, the RxStall is cleared and 1 is returned. If RxStall has
+ * not occurred, 0 is returned.
*/
static u8 check_stall(u8 ep, u8 dir_out)
{
diff --git a/include/linux/fb.h b/include/linux/fb.h
index 652cf3bab7..fcf331b79f 100644
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -388,14 +388,14 @@ struct fb_cursor_user {
#define FB_EVENT_GET_CONSOLE_MAP 0x07
/* CONSOLE-SPECIFIC: set console to framebuffer mapping */
#define FB_EVENT_SET_CONSOLE_MAP 0x08
-/* A hardware display blank change occured */
+/* A hardware display blank change occurred */
#define FB_EVENT_BLANK 0x09
/* Private modelist is to be replaced */
#define FB_EVENT_NEW_MODELIST 0x0A
/* The resolution of the passed in fb_info about to change and
all vc's should be changed */
#define FB_EVENT_MODE_CHANGE_ALL 0x0B
-/* A software display blank change occured */
+/* A software display blank change occurred */
#define FB_EVENT_CONBLANK 0x0C
/* Get drawing requirements */
#define FB_EVENT_GET_REQ 0x0D
diff --git a/include/test/ut.h b/include/test/ut.h
index da7c1a9d26..85434d785a 100644
--- a/include/test/ut.h
+++ b/include/test/ut.h
@@ -17,9 +17,9 @@ struct unit_test_state;
* ut_fail() - Record failure of a unit test
*
* @uts: Test state
- * @fname: Filename where the error occured
- * @line: Line number where the error occured
- * @func: Function name where the error occured
+ * @fname: Filename where the error occurred
+ * @line: Line number where the error occurred
+ * @func: Function name where the error occurred
* @cond: The condition that failed
*/
void ut_fail(struct unit_test_state *uts, const char *fname, int line,
@@ -29,9 +29,9 @@ void ut_fail(struct unit_test_state *uts, const char *fname, int line,
* ut_failf() - Record failure of a unit test
*
* @uts: Test state
- * @fname: Filename where the error occured
- * @line: Line number where the error occured
- * @func: Function name where the error occured
+ * @fname: Filename where the error occurred
+ * @line: Line number where the error occurred
+ * @func: Function name where the error occurred
* @cond: The condition that failed
* @fmt: printf() format string for the error, followed by args
*/
diff --git a/include/usbdevice.h b/include/usbdevice.h
index da5af6efe4..f27e17f124 100644
--- a/include/usbdevice.h
+++ b/include/usbdevice.h
@@ -438,7 +438,7 @@ typedef enum usb_device_event {
DEVICE_HUB_RESET, /* bi - bus has been unplugged */
DEVICE_DESTROY, /* bi - device instance should be destroyed */
- DEVICE_HOTPLUG, /* bi - a hotplug event has occured */
+ DEVICE_HOTPLUG, /* bi - a hotplug event has occurred */
DEVICE_FUNCTION_PRIVATE, /* function - private */