armv8: ls2080ardb, ls2080aqds: Adjust memory map for NOR-boot

This patch adjusts memory map for images on LS2080ARDB and
LS2080AQDS NOR flash as below

Image				Flash Offset
RCW+PBI				0x00000000
Boot firmware (U-Boot)		0x00100000
Boot firmware Environment	0x00300000
PPA firmware			0x00400000
PHY firmware			0x00980000
DPAA2 MC			0x00A00000
DPAA2 DPL			0x00D00000
DPAA2 DPC			0x00E00000
Kernel.itb			0x01000000

Signed-off-by: Santan Kumar <santan.kumar@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>

6 files changed, 40 insertions, 15 deletions

diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
index c8ba2d63ea..fa386c6896 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
@@ -165,7 +165,7 @@ config SYS_LS_PPA_FW_ADDR
 	depends on FSL_LS_PPA
 	default 0x20400000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT && ARCH_LS2080A
 	default 0x40400000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT
-	default 0x580a00000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS2080A
+	default 0x580400000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS2080A
 	default 0x60400000 if SYS_LS_PPA_FW_IN_XIP
 	default 0x400000 if SYS_LS_PPA_FW_IN_MMC
 	default 0x400000 if SYS_LS_PPA_FW_IN_NAND
diff --git a/board/freescale/ls2080aqds/README b/board/freescale/ls2080aqds/README
index 2808bd5851..fd0e25a686 100644
--- a/board/freescale/ls2080aqds/README
+++ b/board/freescale/ls2080aqds/README
@@ -89,6 +89,18 @@ c) NAND boot
 d) SD boot
 e) QSPI boot
 
+Memory map for NOR boot
+-------------------------
+Image				Flash Offset
+RCW+PBI				0x00000000
+Boot firmware (U-Boot)		0x00100000
+Boot firmware Environment	0x00300000
+PPA firmware			0x00400000
+DPAA2 MC			0x00A00000
+DPAA2 DPL			0x00D00000
+DPAA2 DPC			0x00E00000
+Kernel.itb			0x01000000
+
 Environment Variables
 ---------------------
 - mcboottimeout: MC boot timeout in milliseconds. If this variable is not defined
diff --git a/board/freescale/ls2080ardb/README b/board/freescale/ls2080ardb/README
index fde143d2f4..f228d80549 100644
--- a/board/freescale/ls2080ardb/README
+++ b/board/freescale/ls2080ardb/README
@@ -85,6 +85,19 @@ a) NOR boot
 b) NAND boot
 c) QSPI boot
 
+Memory map for NOR boot
+-------------------------
+Image				Flash Offset
+RCW+PBI				0x00000000
+Boot firmware (U-Boot)		0x00100000
+Boot firmware Environment	0x00300000
+PPA firmware			0x00400000
+Cortina PHY firmware		0x00980000
+DPAA2 MC			0x00A00000
+DPAA2 DPL			0x00D00000
+DPAA2 DPC			0x00E00000
+Kernel.itb			0x01000000
+
 cfg_rcw_src switches needs to be changed for booting from different option.
 Refer to board documentation for correct switch setting.
 
diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h
index 363bfd4e95..7b73139879 100644
--- a/include/configs/ls2080a_common.h
+++ b/include/configs/ls2080a_common.h
@@ -193,18 +193,18 @@ unsigned long long get_qixis_addr(void);
 	"ramdisk_size=0x2000000\0"		\
 	"fdt_high=0xa0000000\0"			\
 	"initrd_high=0xffffffffffffffff\0"	\
-	"kernel_start=0x581200000\0"		\
+	"kernel_start=0x581000000\0"		\
 	"kernel_load=0xa0000000\0"		\
 	"kernel_size=0x2800000\0"		\
 	"console=ttyAMA0,38400n8\0"		\
-	"mcinitcmd=fsl_mc start mc 0x580300000"	\
-	" 0x580800000 \0"
+	"mcinitcmd=fsl_mc start mc 0x580a00000"	\
+	" 0x580e00000 \0"
 
 #define CONFIG_BOOTARGS		"console=ttyS0,115200 root=/dev/ram0 " \
 				"earlycon=uart8250,mmio,0x21c0500 " \
 				"ramdisk_size=0x2000000 default_hugepagesz=2m" \
 				" hugepagesz=2m hugepages=256"
-#define CONFIG_BOOTCOMMAND	"fsl_mc apply dpl 0x580700000 &&" \
+#define CONFIG_BOOTCOMMAND	"fsl_mc apply dpl 0x580d00000 &&" \
 				" cp.b $kernel_start $kernel_load" \
 				" $kernel_size && bootm $kernel_load"
 
diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h
index 469ef9e0a4..4788c15d32 100644
--- a/include/configs/ls2080aqds.h
+++ b/include/configs/ls2080aqds.h
@@ -265,7 +265,7 @@ unsigned long get_board_ddr_clk(void);
 
 #ifndef CONFIG_QSPI_BOOT
 #define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_ADDR			(CONFIG_SYS_FLASH_BASE + 0x200000)
+#define CONFIG_ENV_ADDR			(CONFIG_SYS_FLASH_BASE + 0x300000)
 #define CONFIG_ENV_SECT_SIZE		0x20000
 #define CONFIG_ENV_SIZE			0x2000
 #endif
@@ -376,12 +376,12 @@ unsigned long get_board_ddr_clk(void);
 	"ramdisk_size=0x2000000\0"		\
 	"fdt_high=0xa0000000\0"			\
 	"initrd_high=0xffffffffffffffff\0"	\
-	"kernel_start=0x581100000\0"		\
+	"kernel_start=0x581000000\0"		\
 	"kernel_load=0xa0000000\0"		\
 	"kernel_size=0x2800000\0"		\
 	"mcmemsize=0x40000000\0"		\
-	"mcinitcmd=fsl_mc start mc 0x580300000" \
-	" 0x580800000 \0"
+	"mcinitcmd=fsl_mc start mc 0x580a00000" \
+	" 0x580e00000 \0"
 #endif /* CONFIG_SECURE_BOOT */
 
 
diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h
index 3774b177fc..0e920f6374 100644
--- a/include/configs/ls2080ardb.h
+++ b/include/configs/ls2080ardb.h
@@ -251,7 +251,7 @@ unsigned long get_board_sys_clk(void);
 #define CONFIG_SYS_CS2_FTIM3		CONFIG_SYS_NAND_FTIM3
 
 #define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_ADDR			(CONFIG_SYS_FLASH_BASE + 0x200000)
+#define CONFIG_ENV_ADDR			(CONFIG_SYS_FLASH_BASE + 0x300000)
 #define CONFIG_ENV_SECT_SIZE		0x20000
 #define CONFIG_ENV_SIZE			0x2000
 #endif
@@ -421,13 +421,13 @@ unsigned long get_board_sys_clk(void);
 	"ramdisk_size=0x2000000\0"		\
 	"fdt_high=0xa0000000\0"			\
 	"initrd_high=0xffffffffffffffff\0"	\
-	"kernel_start=0x581100000\0"		\
+	"kernel_start=0x581000000\0"		\
 	"kernel_load=0xa0000000\0"		\
 	"kernel_size=0x2800000\0"		\
 	"mcmemsize=0x40000000\0"		\
 	"fdtfile=fsl-ls2080a-rdb.dtb\0"		\
-	"mcinitcmd=fsl_mc start mc 0x580300000" \
-	" 0x580800000 \0"                       \
+	"mcinitcmd=fsl_mc start mc 0x580a00000" \
+	" 0x580e00000 \0"                       \
 	BOOTENV
 #endif
 #endif
@@ -447,7 +447,7 @@ unsigned long get_board_sys_clk(void);
 			   " || run distro_bootcmd"
 #else
 /* Try to boot an on-NOR kernel first, then do normal distro boot */
-#define CONFIG_BOOTCOMMAND "run mcinitcmd && fsl_mc lazyapply dpl 0x580700000" \
+#define CONFIG_BOOTCOMMAND "run mcinitcmd && fsl_mc lazyapply dpl 0x580d00000" \
 			   " && cp.b $kernel_start $kernel_load $kernel_size" \
 			   " && bootm $kernel_load" \
 			   " || run distro_bootcmd"
@@ -463,7 +463,7 @@ unsigned long get_board_sys_clk(void);
 #ifdef CONFIG_QSPI_BOOT
 #define CONFIG_CORTINA_FW_ADDR		0x20980000
 #else
-#define CONFIG_CORTINA_FW_ADDR		0x581000000
+#define CONFIG_CORTINA_FW_ADDR		0x580980000
 #endif
 #define CONFIG_CORTINA_FW_LENGTH	0x40000