mmc: update Faraday FTSDC010 for rw performance

Faraday FTSDC010 is a MMC/SD host controller.
Although there is already a driver in current u-boot release,
which is modified from eSHDC and contributed by Andes Tech.
Its performance is too terrible on Faraday A36x SoC platforms,
so I turn to implement this new version of driver which is
10+ times faster than the old one.

It's carefully designed to be compatible with Andes chips,
so it should be safe to replace it.

Signed-off-by: Kuo-Jung Su <dantesu@faraday-tech.com>
CC: Andy Fleming <afleming@gmail.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>

4 files changed, 400 insertions, 697 deletions

diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
index 196ef9b8e8..2b581781d6 100644
--- a/drivers/mmc/Makefile
+++ b/drivers/mmc/Makefile
@@ -29,7 +29,7 @@ LIB	:= $(obj)libmmc.o
 COBJS-$(CONFIG_BFIN_SDH) += bfin_sdh.o
 COBJS-$(CONFIG_DAVINCI_MMC) += davinci_mmc.o
 COBJS-$(CONFIG_FSL_ESDHC) += fsl_esdhc.o
-COBJS-$(CONFIG_FTSDC010) += ftsdc010_esdhc.o
+COBJS-$(CONFIG_FTSDC010) += ftsdc010_mci.o
 COBJS-$(CONFIG_GENERIC_MMC) += mmc.o
 COBJS-$(CONFIG_GENERIC_ATMEL_MCI) += gen_atmel_mci.o
 COBJS-$(CONFIG_MMC_SPI) += mmc_spi.o
diff --git a/drivers/mmc/ftsdc010_esdhc.c b/drivers/mmc/ftsdc010_esdhc.c
deleted file mode 100644
index 42f0e0ce55..0000000000
--- a/drivers/mmc/ftsdc010_esdhc.c
+++ /dev/null
@@ -1,687 +0,0 @@
-/*
- * Copyright (C) 2011 Andes Technology Corporation
- * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <common.h>
-#include <mmc.h>
-
-#include <asm/io.h>
-#include <faraday/ftsdc010.h>
-
-/*
- * supported mmc hosts
- * setting the number CONFIG_FTSDC010_NUMBER in your configuration file.
- */
-static struct mmc ftsdc010_dev[CONFIG_FTSDC010_NUMBER];
-static struct mmc_host ftsdc010_host[CONFIG_FTSDC010_NUMBER];
-
-static struct ftsdc010_mmc *ftsdc010_get_base_mmc(int dev_index)
-{
-	return (struct ftsdc010_mmc *)CONFIG_FTSDC010_BASE + dev_index;
-}
-
-#ifdef DEBUG
-static void ftsdc010_dump_reg(struct mmc_host *host)
-{
-	debug("cmd: %08x\n",		readl(&host->reg->cmd));
-	debug("argu: %08x\n",		readl(&host->reg->argu));
-	debug("rsp0: %08x\n",		readl(&host->reg->rsp0));
-	debug("rsp1: %08x\n",		readl(&host->reg->rsp1));
-	debug("rsp2: %08x\n",		readl(&host->reg->rsp2));
-	debug("rsp3: %08x\n",		readl(&host->reg->rsp3));
-	debug("rsp_cmd: %08x\n",	readl(&host->reg->rsp_cmd));
-	debug("dcr: %08x\n",		readl(&host->reg->dcr));
-	debug("dtr: %08x\n",		readl(&host->reg->dtr));
-	debug("dlr: %08x\n",		readl(&host->reg->dlr));
-	debug("status: %08x\n",		readl(&host->reg->status));
-	debug("clr: %08x\n",		readl(&host->reg->clr));
-	debug("int_mask: %08x\n",	readl(&host->reg->int_mask));
-	debug("pcr: %08x\n",		readl(&host->reg->pcr));
-	debug("ccr: %08x\n",		readl(&host->reg->ccr));
-	debug("bwr: %08x\n",		readl(&host->reg->bwr));
-	debug("dwr: %08x\n",		readl(&host->reg->dwr));
-	debug("feature: %08x\n",	readl(&host->reg->feature));
-	debug("rev: %08x\n",		readl(&host->reg->rev));
-}
-#endif
-
-static unsigned int enable_imask(struct ftsdc010_mmc *reg, unsigned int imask)
-{
-	unsigned int newmask;
-
-	newmask = readl(&reg->int_mask);
-	newmask |= imask;
-
-	writel(newmask, &reg->int_mask);
-
-	return newmask;
-}
-
-static void ftsdc010_pio_read(struct mmc_host *host, char *buf, unsigned int size)
-{
-	unsigned int fifo;
-	unsigned int fifo_words;
-	unsigned int *ptr;
-	unsigned int status;
-	unsigned int retry = 0;
-
-	/* get_data_buffer */
-	ptr = (unsigned int *)buf;
-
-	while (size) {
-		status = readl(&host->reg->status);
-		debug("%s: size: %08x\n", __func__, size);
-
-		if (status & FTSDC010_STATUS_FIFO_ORUN) {
-
-			debug("%s: FIFO OVERRUN: sta: %08x\n",
-					__func__, status);
-
-			fifo = host->fifo_len > size ?
-				size : host->fifo_len;
-
-			size -= fifo;
-
-			fifo_words = fifo >> 2;
-
-			while (fifo_words--)
-				*ptr++ = readl(&host->reg->dwr);
-
-			/*
-			 * for adding some delays for SD card to put
-			 * data into FIFO again
-			 */
-			udelay(4*FTSDC010_DELAY_UNIT);
-
-#ifdef CONFIG_FTSDC010_SDIO
-			/* sdio allow non-power-of-2 blksz */
-			if (fifo & 3) {
-				unsigned int n = fifo & 3;
-				unsigned int data = readl(&host->reg->dwr);
-
-				unsigned char *p = (unsigned char *)ptr;
-
-				while (n--) {
-					*p++ = data;
-					data >>= 8;
-				}
-			}
-#endif
-		} else {
-			udelay(1);
-			if (++retry >= FTSDC010_PIO_RETRY) {
-				debug("%s: PIO_RETRY timeout\n", __func__);
-				return;
-			}
-		}
-	}
-}
-
-static void ftsdc010_pio_write(struct mmc_host *host, const char *buf,
-			unsigned int size)
-{
-	unsigned int fifo;
-	unsigned int *ptr;
-	unsigned int status;
-	unsigned int retry = 0;
-
-	/* get data buffer */
-	ptr = (unsigned int *)buf;
-
-	while (size) {
-		status = readl(&host->reg->status);
-
-		if (status & FTSDC010_STATUS_FIFO_URUN) {
-			fifo = host->fifo_len > size ?
-				size : host->fifo_len;
-
-			size -= fifo;
-
-			fifo = (fifo + 3) >> 2;
-
-			while (fifo--) {
-				writel(*ptr, &host->reg->dwr);
-				ptr++;
-			}
-		} else {
-			udelay(1);
-			if (++retry >= FTSDC010_PIO_RETRY) {
-				debug("%s: PIO_RETRY timeout\n", __func__);
-				return;
-			}
-		}
-	}
-}
-
-static int ftsdc010_check_rsp(struct mmc *mmc, struct mmc_cmd *cmd,
-			struct mmc_data *data)
-{
-	struct mmc_host *host = mmc->priv;
-	unsigned int sta, clear;
-
-	sta = readl(&host->reg->status);
-	debug("%s: sta: %08x cmd %d\n", __func__, sta, cmd->cmdidx);
-
-	/* check RSP TIMEOUT or FAIL */
-	if (sta & FTSDC010_STATUS_RSP_TIMEOUT) {
-		/* RSP TIMEOUT */
-		debug("%s: RSP timeout: sta: %08x\n", __func__, sta);
-
-		clear |= FTSDC010_CLR_RSP_TIMEOUT;
-		writel(clear, &host->reg->clr);
-
-		return TIMEOUT;
-	} else if (sta & FTSDC010_STATUS_RSP_CRC_FAIL) {
-		/* clear response fail bit */
-		debug("%s: RSP CRC FAIL: sta: %08x\n", __func__, sta);
-
-		clear |= FTSDC010_CLR_RSP_CRC_FAIL;
-		writel(clear, &host->reg->clr);
-
-		return COMM_ERR;
-	} else if (sta & FTSDC010_STATUS_RSP_CRC_OK) {
-
-		/* clear response CRC OK bit */
-		clear |= FTSDC010_CLR_RSP_CRC_OK;
-	}
-
-	writel(clear, &host->reg->clr);
-	return 0;
-}
-
-static int ftsdc010_check_data(struct mmc *mmc, struct mmc_cmd *cmd,
-			struct mmc_data *data)
-{
-	struct mmc_host *host = mmc->priv;
-	unsigned int sta, clear;
-
-	sta = readl(&host->reg->status);
-	debug("%s: sta: %08x cmd %d\n", __func__, sta, cmd->cmdidx);
-
-	/* check DATA TIMEOUT or FAIL */
-	if (data) {
-
-		/* Transfer Complete */
-		if (sta & FTSDC010_STATUS_DATA_END)
-			clear |= FTSDC010_STATUS_DATA_END;
-
-		/* Data CRC_OK */
-		if (sta & FTSDC010_STATUS_DATA_CRC_OK)
-			clear |= FTSDC010_STATUS_DATA_CRC_OK;
-
-		/* DATA TIMEOUT or DATA CRC FAIL */
-		if (sta & FTSDC010_STATUS_DATA_TIMEOUT) {
-			/* DATA TIMEOUT */
-			debug("%s: DATA TIMEOUT: sta: %08x\n", __func__, sta);
-
-			clear |= FTSDC010_STATUS_DATA_TIMEOUT;
-			writel(clear, &host->reg->clr);
-
-			return TIMEOUT;
-		} else if (sta & FTSDC010_STATUS_DATA_CRC_FAIL) {
-			/* DATA CRC FAIL */
-			debug("%s: DATA CRC FAIL: sta: %08x\n", __func__, sta);
-
-			clear |= FTSDC010_STATUS_DATA_CRC_FAIL;
-			writel(clear, &host->reg->clr);
-
-			return COMM_ERR;
-		}
-		writel(clear, &host->reg->clr);
-	}
-	return 0;
-}
-
-static int ftsdc010_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
-			struct mmc_data *data)
-{
-	struct mmc_host *host = mmc->priv;
-
-#ifdef CONFIG_FTSDC010_SDIO
-	unsigned int scon;
-#endif
-	unsigned int ccon;
-	unsigned int mask, tmpmask;
-	unsigned int ret;
-	unsigned int sta, i;
-
-	ret = 0;
-
-	if (data)
-		mask = FTSDC010_INT_MASK_RSP_TIMEOUT;
-	else if (cmd->resp_type & MMC_RSP_PRESENT)
-		mask = FTSDC010_INT_MASK_RSP_TIMEOUT;
-	else
-		mask = FTSDC010_INT_MASK_CMD_SEND;
-
-	/* write argu reg */
-	debug("%s: argu: %08x\n", __func__, host->reg->argu);
-	writel(cmd->cmdarg, &host->reg->argu);
-
-	/* setup commnad */
-	ccon = FTSDC010_CMD_IDX(cmd->cmdidx);
-
-	/* setup command flags */
-	ccon |= FTSDC010_CMD_CMD_EN;
-
-	/*
-	 * This hardware didn't support specific commands for mapping
-	 * MMC_RSP_BUSY and MMC_RSP_OPCODE. Hence we don't deal with it.
-	 */
-	if (cmd->resp_type & MMC_RSP_PRESENT) {
-		ccon |= FTSDC010_CMD_NEED_RSP;
-		mask |= FTSDC010_INT_MASK_RSP_CRC_OK |
-			FTSDC010_INT_MASK_RSP_CRC_FAIL;
-	}
-
-	if (cmd->resp_type & MMC_RSP_136)
-		ccon |= FTSDC010_CMD_LONG_RSP;
-
-	/* In Linux driver, MMC_CMD_APP_CMD is checked in last_opcode */
-	if (host->last_opcode == MMC_CMD_APP_CMD)
-		ccon |= FTSDC010_CMD_APP_CMD;
-
-#ifdef CONFIG_FTSDC010_SDIO
-	scon = readl(&host->reg->sdio_ctrl1);
-	if (host->card_type == MMC_TYPE_SDIO)
-		scon |= FTSDC010_SDIO_CTRL1_SDIO_ENABLE;
-	else
-		scon &= ~FTSDC010_SDIO_CTRL1_SDIO_ENABLE;
-	writel(scon, &host->reg->sdio_ctrl1);
-#endif
-
-	/* record last opcode for specifing the command type to hardware */
-	host->last_opcode = cmd->cmdidx;
-
-	/* write int_mask reg */
-	tmpmask = readl(&host->reg->int_mask);
-	tmpmask |= mask;
-	writel(tmpmask, &host->reg->int_mask);
-
-	/* write cmd reg */
-	debug("%s: ccon: %08x\n", __func__, ccon);
-	writel(ccon, &host->reg->cmd);
-
-	/* check CMD_SEND */
-	for (i = 0; i < FTSDC010_CMD_RETRY; i++) {
-		/*
-		 * If we read status register too fast
-		 * will lead hardware error and the RSP_TIMEOUT
-		 * flag will be raised incorrectly.
-		 */
-		udelay(16*FTSDC010_DELAY_UNIT);
-		sta = readl(&host->reg->status);
-
-		/* Command Complete */
-		/*
-		 * Note:
-		 *	Do not clear FTSDC010_CLR_CMD_SEND flag.
-		 *	(by writing FTSDC010_CLR_CMD_SEND bit to clear register)
-		 *	It will make the driver becomes very slow.
-		 *	If the operation hasn't been finished, hardware will
-		 *	clear this bit automatically.
-		 *	In origin, the driver will clear this flag if there is
-		 *	no data need to be read.
-		 */
-		if (sta & FTSDC010_STATUS_CMD_SEND)
-			break;
-	}
-
-	if (i > FTSDC010_CMD_RETRY) {
-		printf("%s: send command timeout\n", __func__);
-		return TIMEOUT;
-	}
-
-	/* check rsp status */
-	ret = ftsdc010_check_rsp(mmc, cmd, data);
-	if (ret)
-		return ret;
-
-	/* read response if we have RSP_OK */
-	if (ccon & FTSDC010_CMD_LONG_RSP) {
-		cmd->response[0] = readl(&host->reg->rsp3);
-		cmd->response[1] = readl(&host->reg->rsp2);
-		cmd->response[2] = readl(&host->reg->rsp1);
-		cmd->response[3] = readl(&host->reg->rsp0);
-	} else {
-		cmd->response[0] = readl(&host->reg->rsp0);
-	}
-
-	/* read/write data */
-	if (data && (data->flags & MMC_DATA_READ)) {
-		ftsdc010_pio_read(host, data->dest,
-				data->blocksize * data->blocks);
-	} else if (data && (data->flags & MMC_DATA_WRITE)) {
-		ftsdc010_pio_write(host, data->src,
-				data->blocksize * data->blocks);
-	}
-
-	/* check data status */
-	if (data) {
-		ret = ftsdc010_check_data(mmc, cmd, data);
-		if (ret)
-			return ret;
-	}
-
-	udelay(FTSDC010_DELAY_UNIT);
-	return ret;
-}
-
-static unsigned int cal_blksz(unsigned int blksz)
-{
-	unsigned int blksztwo = 0;
-
-	while (blksz >>= 1)
-		blksztwo++;
-
-	return blksztwo;
-}
-
-static int ftsdc010_setup_data(struct mmc *mmc, struct mmc_data *data)
-{
-	struct mmc_host *host = mmc->priv;
-	unsigned int dcon, newmask;
-
-	/* configure data transfer paramter */
-	if (!data)
-		return 0;
-
-	if (((data->blocksize - 1) & data->blocksize) != 0) {
-		printf("%s: can't do non-power-of 2 sized block transfers"
-			" (blksz %d)\n", __func__, data->blocksize);
-		return -1;
-	}
-
-	/*
-	 * We cannot deal with unaligned blocks with more than
-	 * one block being transfered.
-	 */
-	if ((data->blocksize <= 2) && (data->blocks > 1)) {
-			printf("%s: can't do non-word sized block transfers"
-				" (blksz %d)\n", __func__, data->blocksize);
-			return -1;
-	}
-
-	/* data length */
-	dcon = data->blocksize * data->blocks;
-	writel(dcon, &host->reg->dlr);
-
-	/* write data control */
-	dcon = cal_blksz(data->blocksize);
-
-	/* add to IMASK register */
-	newmask = (FTSDC010_STATUS_RSP_CRC_FAIL | FTSDC010_STATUS_DATA_TIMEOUT);
-
-	/*
-	 * enable UNDERRUN will trigger interrupt immediatedly
-	 * So setup it when rsp is received successfully
-	 */
-	if (data->flags & MMC_DATA_WRITE) {
-		dcon |= FTSDC010_DCR_DATA_WRITE;
-	} else {
-		dcon &= ~FTSDC010_DCR_DATA_WRITE;
-		newmask |= FTSDC010_STATUS_FIFO_ORUN;
-	}
-	enable_imask(host->reg, newmask);
-
-#ifdef CONFIG_FTSDC010_SDIO
-	/* always reset fifo since last transfer may fail */
-	dcon |= FTSDC010_DCR_FIFO_RST;
-
-	if (data->blocks > 1)
-		dcon |= FTSDC010_SDIO_CTRL1_SDIO_BLK_MODE;
-#endif
-
-	/* enable data transfer which will be pended until cmd is send */
-	dcon |= FTSDC010_DCR_DATA_EN;
-	writel(dcon, &host->reg->dcr);
-
-	return 0;
-}
-
-static int ftsdc010_send_request(struct mmc *mmc, struct mmc_cmd *cmd,
-			struct mmc_data *data)
-{
-	int ret;
-
-	if (data) {
-		ret = ftsdc010_setup_data(mmc, data);
-
-		if (ret) {
-			printf("%s: setup data error\n", __func__);
-			return -1;
-		}
-
-		if ((data->flags & MMC_DATA_BOTH_DIR) == MMC_DATA_BOTH_DIR) {
-			printf("%s: data is both direction\n", __func__);
-			return -1;
-		}
-	}
-
-	/* Send command */
-	ret = ftsdc010_send_cmd(mmc, cmd, data);
-	return ret;
-}
-
-static int ftsdc010_card_detect(struct mmc *mmc)
-{
-	struct mmc_host *host = mmc->priv;
-	unsigned int sta;
-
-	sta = readl(&host->reg->status);
-	debug("%s: card status: %08x\n", __func__, sta);
-
-	return (sta & FTSDC010_STATUS_CARD_DETECT) ? 0 : 1;
-}
-
-static int ftsdc010_request(struct mmc *mmc, struct mmc_cmd *cmd,
-			struct mmc_data *data)
-{
-	int ret;
-
-	if (ftsdc010_card_detect(mmc) == 0) {
-		printf("%s: no medium present\n", __func__);
-		return -1;
-	} else {
-		ret = ftsdc010_send_request(mmc, cmd, data);
-		return ret;
-	}
-}
-
-static void ftsdc010_set_clk(struct mmc *mmc)
-{
-	struct mmc_host *host = mmc->priv;
-	unsigned char clk_div;
-	unsigned int real_rate;
-	unsigned int clock;
-
-	debug("%s: mmc_set_clock: %x\n", __func__, mmc->clock);
-	clock = readl(&host->reg->ccr);
-
-	if (mmc->clock == 0) {
-		real_rate = 0;
-		clock |= FTSDC010_CCR_CLK_DIS;
-	} else {
-		debug("%s, mmc->clock: %08x, origin clock: %08x\n",
-			 __func__, mmc->clock, clock);
-
-		for (clk_div = 0; clk_div <= 127; clk_div++) {
-			real_rate = (CONFIG_SYS_CLK_FREQ / 2) /
-					(2 * (clk_div + 1));
-
-			if (real_rate <= mmc->clock)
-				break;
-		}
-
-		debug("%s: computed real_rate: %x, clk_div: %x\n",
-			 __func__, real_rate, clk_div);
-
-		if (clk_div > 127)
-			debug("%s: no match clock rate, %x\n",
-				__func__, mmc->clock);
-
-		clock = (clock & ~FTSDC010_CCR_CLK_DIV(0x7f)) |
-				FTSDC010_CCR_CLK_DIV(clk_div);
-
-		clock &= ~FTSDC010_CCR_CLK_DIS;
-	}
-
-	debug("%s, set clock: %08x\n", __func__, clock);
-	writel(clock, &host->reg->ccr);
-}
-
-static void ftsdc010_set_ios(struct mmc *mmc)
-{
-	struct mmc_host *host = mmc->priv;
-	unsigned int power;
-	unsigned long val;
-	unsigned int bus_width;
-
-	debug("%s: bus_width: %x, clock: %d\n",
-		__func__, mmc->bus_width, mmc->clock);
-
-	/* set pcr: power on */
-	power = readl(&host->reg->pcr);
-	power |= FTSDC010_PCR_POWER_ON;
-	writel(power, &host->reg->pcr);
-
-	if (mmc->clock)
-		ftsdc010_set_clk(mmc);
-
-	/* set bwr: bus width reg */
-	bus_width = readl(&host->reg->bwr);
-	bus_width &= ~(FTSDC010_BWR_WIDE_8_BUS | FTSDC010_BWR_WIDE_4_BUS |
-			FTSDC010_BWR_SINGLE_BUS);
-
-	if (mmc->bus_width == 8)
-		bus_width |= FTSDC010_BWR_WIDE_8_BUS;
-	else if (mmc->bus_width == 4)
-		bus_width |= FTSDC010_BWR_WIDE_4_BUS;
-	else
-		bus_width |= FTSDC010_BWR_SINGLE_BUS;
-
-	writel(bus_width, &host->reg->bwr);
-
-	/* set fifo depth */
-	val = readl(&host->reg->feature);
-	host->fifo_len = FTSDC010_FEATURE_FIFO_DEPTH(val) * 4; /* 4 bytes */
-
-	/* set data timeout register */
-	val = -1;
-	writel(val, &host->reg->dtr);
-}
-
-static void ftsdc010_reset(struct mmc_host *host)
-{
-	unsigned int timeout;
-	unsigned int sta;
-
-	/* Do SDC_RST: Software reset for all register */
-	writel(FTSDC010_CMD_SDC_RST, &host->reg->cmd);
-
-	host->clock = 0;
-
-	/* this hardware has no reset finish flag to read */
-	/* wait 100ms maximum */
-	timeout = 100;
-
-	/* hw clears the bit when it's done */
-	while (readl(&host->reg->dtr) != 0) {
-		if (timeout == 0) {
-			printf("%s: reset timeout error\n", __func__);
-			return;
-		}
-		timeout--;
-		udelay(10*FTSDC010_DELAY_UNIT);
-	}
-
-	sta = readl(&host->reg->status);
-	if (sta & FTSDC010_STATUS_CARD_CHANGE)
-		writel(FTSDC010_CLR_CARD_CHANGE, &host->reg->clr);
-}
-
-static int ftsdc010_core_init(struct mmc *mmc)
-{
-	struct mmc_host *host = mmc->priv;
-	unsigned int mask;
-	unsigned int major, minor, revision;
-
-	/* get hardware version */
-	host->version = readl(&host->reg->rev);
-
-	major = FTSDC010_REV_MAJOR(host->version);
-	minor = FTSDC010_REV_MINOR(host->version);
-	revision = FTSDC010_REV_REVISION(host->version);
-
-	printf("ftsdc010 hardware ver: %d_%d_r%d\n", major, minor, revision);
-
-	/* Interrupt MASK register init - mask all */
-	writel(0x0, &host->reg->int_mask);
-
-	mask = FTSDC010_INT_MASK_CMD_SEND |
-		FTSDC010_INT_MASK_DATA_END |
-		FTSDC010_INT_MASK_CARD_CHANGE;
-#ifdef CONFIG_FTSDC010_SDIO
-	mask |= FTSDC010_INT_MASK_CP_READY |
-		FTSDC010_INT_MASK_CP_BUF_READY |
-		FTSDC010_INT_MASK_PLAIN_TEXT_READY |
-		FTSDC010_INT_MASK_SDIO_IRPT;
-#endif
-
-	writel(mask, &host->reg->int_mask);
-
-	return 0;
-}
-
-int ftsdc010_mmc_init(int dev_index)
-{
-	struct mmc *mmc;
-	struct mmc_host *host;
-
-	mmc = &ftsdc010_dev[dev_index];
-
-	sprintf(mmc->name, "FTSDC010 SD/MMC");
-	mmc->priv = &ftsdc010_host[dev_index];
-	mmc->send_cmd = ftsdc010_request;
-	mmc->set_ios = ftsdc010_set_ios;
-	mmc->init = ftsdc010_core_init;
-	mmc->getcd = NULL;
-	mmc->getwp = NULL;
-
-	mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34;
-
-	mmc->host_caps = MMC_MODE_4BIT | MMC_MODE_8BIT;
-
-	mmc->f_min = CONFIG_SYS_CLK_FREQ / 2 / (2*128);
-	mmc->f_max = CONFIG_SYS_CLK_FREQ / 2 / 2;
-
-	ftsdc010_host[dev_index].clock = 0;
-	ftsdc010_host[dev_index].reg = ftsdc010_get_base_mmc(dev_index);
-	mmc_register(mmc);
-
-	/* reset mmc */
-	host = (struct mmc_host *)mmc->priv;
-	ftsdc010_reset(host);
-
-	return 0;
-}
diff --git a/drivers/mmc/ftsdc010_mci.c b/drivers/mmc/ftsdc010_mci.c
new file mode 100644
index 0000000000..562b14aff8
--- /dev/null
+++ b/drivers/mmc/ftsdc010_mci.c
@@ -0,0 +1,377 @@
+/*
+ * Faraday MMC/SD Host Controller
+ *
+ * (C) Copyright 2010 Faraday Technology
+ * Dante Su <dantesu@faraday-tech.com>
+ *
+ * This file is released under the terms of GPL v2 and any later version.
+ * See the file COPYING in the root directory of the source tree for details.
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <part.h>
+#include <mmc.h>
+
+#include <asm/io.h>
+#include <asm/errno.h>
+#include <asm/byteorder.h>
+#include <faraday/ftsdc010.h>
+
+#define CFG_CMD_TIMEOUT (CONFIG_SYS_HZ >> 4) /* 250 ms */
+#define CFG_RST_TIMEOUT CONFIG_SYS_HZ /* 1 sec reset timeout */
+
+struct ftsdc010_chip {
+	void __iomem *regs;
+	uint32_t wprot;   /* write protected (locked) */
+	uint32_t rate;    /* actual SD clock in Hz */
+	uint32_t sclk;    /* FTSDC010 source clock in Hz */
+	uint32_t fifo;    /* fifo depth in bytes */
+	uint32_t acmd;
+};
+
+static inline int ftsdc010_send_cmd(struct mmc *mmc, struct mmc_cmd *mmc_cmd)
+{
+	struct ftsdc010_chip *chip = mmc->priv;
+	struct ftsdc010_mmc __iomem *regs = chip->regs;
+	int ret = TIMEOUT;
+	uint32_t ts, st;
+	uint32_t cmd   = FTSDC010_CMD_IDX(mmc_cmd->cmdidx);
+	uint32_t arg   = mmc_cmd->cmdarg;
+	uint32_t flags = mmc_cmd->resp_type;
+
+	cmd |= FTSDC010_CMD_CMD_EN;
+
+	if (chip->acmd) {
+		cmd |= FTSDC010_CMD_APP_CMD;
+		chip->acmd = 0;
+	}
+
+	if (flags & MMC_RSP_PRESENT)
+		cmd |= FTSDC010_CMD_NEED_RSP;
+
+	if (flags & MMC_RSP_136)
+		cmd |= FTSDC010_CMD_LONG_RSP;
+
+	writel(FTSDC010_STATUS_RSP_MASK | FTSDC010_STATUS_CMD_SEND,
+		&regs->clr);
+	writel(arg, &regs->argu);
+	writel(cmd, &regs->cmd);
+
+	if (!(flags & (MMC_RSP_PRESENT | MMC_RSP_136))) {
+		for (ts = get_timer(0); get_timer(ts) < CFG_CMD_TIMEOUT; ) {
+			if (readl(&regs->status) & FTSDC010_STATUS_CMD_SEND) {
+				writel(FTSDC010_STATUS_CMD_SEND, &regs->clr);
+				ret = 0;
+				break;
+			}
+		}
+	} else {
+		st = 0;
+		for (ts = get_timer(0); get_timer(ts) < CFG_CMD_TIMEOUT; ) {
+			st = readl(&regs->status);
+			writel(st & FTSDC010_STATUS_RSP_MASK, &regs->clr);
+			if (st & FTSDC010_STATUS_RSP_MASK)
+				break;
+		}
+		if (st & FTSDC010_STATUS_RSP_CRC_OK) {
+			if (flags & MMC_RSP_136) {
+				mmc_cmd->response[0] = readl(&regs->rsp3);
+				mmc_cmd->response[1] = readl(&regs->rsp2);
+				mmc_cmd->response[2] = readl(&regs->rsp1);
+				mmc_cmd->response[3] = readl(&regs->rsp0);
+			} else {
+				mmc_cmd->response[0] = readl(&regs->rsp0);
+			}
+			ret = 0;
+		} else {
+			debug("ftsdc010: rsp err (cmd=%d, st=0x%x)\n",
+				mmc_cmd->cmdidx, st);
+		}
+	}
+
+	if (ret) {
+		debug("ftsdc010: cmd timeout (op code=%d)\n",
+			mmc_cmd->cmdidx);
+	} else if (mmc_cmd->cmdidx == MMC_CMD_APP_CMD) {
+		chip->acmd = 1;
+	}
+
+	return ret;
+}
+
+static void ftsdc010_clkset(struct mmc *mmc, uint32_t rate)
+{
+	struct ftsdc010_chip *chip = mmc->priv;
+	struct ftsdc010_mmc __iomem *regs = chip->regs;
+	uint32_t div;
+
+	for (div = 0; div < 0x7f; ++div) {
+		if (rate >= chip->sclk / (2 * (div + 1)))
+			break;
+	}
+	chip->rate = chip->sclk / (2 * (div + 1));
+
+	writel(FTSDC010_CCR_CLK_DIV(div), &regs->ccr);
+
+	if (IS_SD(mmc)) {
+		setbits_le32(&regs->ccr, FTSDC010_CCR_CLK_SD);
+
+		if (chip->rate > 25000000)
+			setbits_le32(&regs->ccr, FTSDC010_CCR_CLK_HISPD);
+		else
+			clrbits_le32(&regs->ccr, FTSDC010_CCR_CLK_HISPD);
+	}
+}
+
+static inline int ftsdc010_is_ro(struct mmc *mmc)
+{
+	struct ftsdc010_chip *chip = mmc->priv;
+	const uint8_t *csd = (const uint8_t *)mmc->csd;
+
+	return chip->wprot || (csd[1] & 0x30);
+}
+
+static int ftsdc010_wait(struct ftsdc010_mmc __iomem *regs, uint32_t mask)
+{
+	int ret = TIMEOUT;
+	uint32_t st, ts;
+
+	for (ts = get_timer(0); get_timer(ts) < CFG_CMD_TIMEOUT; ) {
+		st = readl(&regs->status);
+		if (!(st & mask))
+			continue;
+		writel(st & mask, &regs->clr);
+		ret = 0;
+		break;
+	}
+
+	if (ret)
+		debug("ftsdc010: wait st(0x%x) timeout\n", mask);
+
+	return ret;
+}
+
+/*
+ * u-boot mmc api
+ */
+
+static int ftsdc010_request(struct mmc *mmc, struct mmc_cmd *cmd,
+	struct mmc_data *data)
+{
+	int ret = UNUSABLE_ERR;
+	uint32_t len = 0;
+	struct ftsdc010_chip *chip = mmc->priv;
+	struct ftsdc010_mmc __iomem *regs = chip->regs;
+
+	if (data && (data->flags & MMC_DATA_WRITE) && chip->wprot) {
+		printf("ftsdc010: the card is write protected!\n");
+		return ret;
+	}
+
+	if (data) {
+		uint32_t dcr;
+
+		len = data->blocksize * data->blocks;
+
+		/* 1. data disable + fifo reset */
+		writel(FTSDC010_DCR_FIFO_RST, &regs->dcr);
+
+		/* 2. clear status register */
+		writel(FTSDC010_STATUS_DATA_MASK | FTSDC010_STATUS_FIFO_URUN
+			| FTSDC010_STATUS_FIFO_ORUN, &regs->clr);
+
+		/* 3. data timeout (1 sec) */
+		writel(chip->rate, &regs->dtr);
+
+		/* 4. data length (bytes) */
+		writel(len, &regs->dlr);
+
+		/* 5. data enable */
+		dcr = (ffs(data->blocksize) - 1) | FTSDC010_DCR_DATA_EN;
+		if (data->flags & MMC_DATA_WRITE)
+			dcr |= FTSDC010_DCR_DATA_WRITE;
+		writel(dcr, &regs->dcr);
+	}
+
+	ret = ftsdc010_send_cmd(mmc, cmd);
+	if (ret) {
+		printf("ftsdc010: CMD%d failed\n", cmd->cmdidx);
+		return ret;
+	}
+
+	if (!data)
+		return ret;
+
+	if (data->flags & MMC_DATA_WRITE) {
+		const uint8_t *buf = (const uint8_t *)data->src;
+
+		while (len > 0) {
+			int wlen;
+
+			/* wait for tx ready */
+			ret = ftsdc010_wait(regs, FTSDC010_STATUS_FIFO_URUN);
+			if (ret)
+				break;
+
+			/* write bytes to ftsdc010 */
+			for (wlen = 0; wlen < len && wlen < chip->fifo; ) {
+				writel(*(uint32_t *)buf, &regs->dwr);
+				buf  += 4;
+				wlen += 4;
+			}
+
+			len -= wlen;
+		}
+
+	} else {
+		uint8_t *buf = (uint8_t *)data->dest;
+
+		while (len > 0) {
+			int rlen;
+
+			/* wait for rx ready */
+			ret = ftsdc010_wait(regs, FTSDC010_STATUS_FIFO_ORUN);
+			if (ret)
+				break;
+
+			/* fetch bytes from ftsdc010 */
+			for (rlen = 0; rlen < len && rlen < chip->fifo; ) {
+				*(uint32_t *)buf = readl(&regs->dwr);
+				buf  += 4;
+				rlen += 4;
+			}
+
+			len -= rlen;
+		}
+
+	}
+
+	if (!ret) {
+		ret = ftsdc010_wait(regs,
+			FTSDC010_STATUS_DATA_END | FTSDC010_STATUS_DATA_ERROR);
+	}
+
+	return ret;
+}
+
+static void ftsdc010_set_ios(struct mmc *mmc)
+{
+	struct ftsdc010_chip *chip = mmc->priv;
+	struct ftsdc010_mmc __iomem *regs = chip->regs;
+
+	ftsdc010_clkset(mmc, mmc->clock);
+
+	clrbits_le32(&regs->bwr, FTSDC010_BWR_MODE_MASK);
+	switch (mmc->bus_width) {
+	case 4:
+		setbits_le32(&regs->bwr, FTSDC010_BWR_MODE_4BIT);
+		break;
+	case 8:
+		setbits_le32(&regs->bwr, FTSDC010_BWR_MODE_8BIT);
+		break;
+	default:
+		setbits_le32(&regs->bwr, FTSDC010_BWR_MODE_1BIT);
+		break;
+	}
+}
+
+static int ftsdc010_init(struct mmc *mmc)
+{
+	struct ftsdc010_chip *chip = mmc->priv;
+	struct ftsdc010_mmc __iomem *regs = chip->regs;
+	uint32_t ts;
+
+	if (readl(&regs->status) & FTSDC010_STATUS_CARD_DETECT)
+		return NO_CARD_ERR;
+
+	if (readl(&regs->status) & FTSDC010_STATUS_WRITE_PROT) {
+		printf("ftsdc010: write protected\n");
+		chip->wprot = 1;
+	}
+
+	chip->fifo = (readl(&regs->feature) & 0xff) << 2;
+
+	/* 1. chip reset */
+	writel(FTSDC010_CMD_SDC_RST, &regs->cmd);
+	for (ts = get_timer(0); get_timer(ts) < CFG_RST_TIMEOUT; ) {
+		if (readl(&regs->cmd) & FTSDC010_CMD_SDC_RST)
+			continue;
+		break;
+	}
+	if (readl(&regs->cmd) & FTSDC010_CMD_SDC_RST) {
+		printf("ftsdc010: reset failed\n");
+		return UNUSABLE_ERR;
+	}
+
+	/* 2. enter low speed mode (400k card detection) */
+	ftsdc010_clkset(mmc, 400000);
+
+	/* 3. interrupt disabled */
+	writel(0, &regs->int_mask);
+
+	return 0;
+}
+
+int ftsdc010_mmc_init(int devid)
+{
+	struct mmc *mmc;
+	struct ftsdc010_chip *chip;
+	struct ftsdc010_mmc __iomem *regs;
+#ifdef CONFIG_FTSDC010_BASE_LIST
+	uint32_t base_list[] = CONFIG_FTSDC010_BASE_LIST;
+
+	if (devid < 0 || devid >= ARRAY_SIZE(base_list))
+		return -1;
+	regs = (void __iomem *)base_list[devid];
+#else
+	regs = (void __iomem *)(CONFIG_FTSDC010_BASE + (devid << 20));
+#endif
+
+	mmc = malloc(sizeof(struct mmc));
+	if (!mmc)
+		return -ENOMEM;
+	memset(mmc, 0, sizeof(struct mmc));
+
+	chip = malloc(sizeof(struct ftsdc010_chip));
+	if (!chip) {
+		free(mmc);
+		return -ENOMEM;
+	}
+	memset(chip, 0, sizeof(struct ftsdc010_chip));
+
+	chip->regs = regs;
+	mmc->priv  = chip;
+
+	sprintf(mmc->name, "ftsdc010");
+	mmc->send_cmd  = ftsdc010_request;
+	mmc->set_ios   = ftsdc010_set_ios;
+	mmc->init      = ftsdc010_init;
+
+	mmc->host_caps = MMC_MODE_HS | MMC_MODE_HS_52MHz;
+	switch (readl(&regs->bwr) & FTSDC010_BWR_CAPS_MASK) {
+	case FTSDC010_BWR_CAPS_4BIT:
+		mmc->host_caps |= MMC_MODE_4BIT;
+		break;
+	case FTSDC010_BWR_CAPS_8BIT:
+		mmc->host_caps |= MMC_MODE_4BIT | MMC_MODE_8BIT;
+		break;
+	default:
+		break;
+	}
+
+#ifdef CONFIG_SYS_CLK_FREQ
+	chip->sclk = CONFIG_SYS_CLK_FREQ;
+#else
+	chip->sclk = clk_get_rate("SDC");
+#endif
+
+	mmc->voltages  = MMC_VDD_32_33 | MMC_VDD_33_34;
+	mmc->f_max     = chip->sclk / 2;
+	mmc->f_min     = chip->sclk / 0x100;
+	mmc->block_dev.part_type = PART_TYPE_DOS;
+
+	mmc_register(mmc);
+
+	return 0;
+}
diff --git a/include/faraday/ftsdc010.h b/include/faraday/ftsdc010.h
index c34dde7477..8284f53348 100644
--- a/include/faraday/ftsdc010.h
+++ b/include/faraday/ftsdc010.h
@@ -23,6 +23,7 @@
 #define __FTSDC010_H
 
 #ifndef __ASSEMBLY__
+
 /* sd controller register */
 struct ftsdc010_mmc {
 	unsigned int	cmd;		/* 0x00 - command reg		*/
@@ -143,6 +144,15 @@ int ftsdc010_mmc_init(int dev_index);
 #define FTSDC010_STATUS_SDIO_IRPT		(1 << 16) /* SDIO card intr */
 #define FTSDC010_STATUS_DATA0_STATUS		(1 << 17)
 #endif /* CONFIG_FTSDC010_SDIO */
+#define FTSDC010_STATUS_RSP_ERROR	\
+	(FTSDC010_STATUS_RSP_CRC_FAIL | FTSDC010_STATUS_RSP_TIMEOUT)
+#define FTSDC010_STATUS_RSP_MASK	\
+	(FTSDC010_STATUS_RSP_ERROR | FTSDC010_STATUS_RSP_CRC_OK)
+#define FTSDC010_STATUS_DATA_ERROR	\
+	(FTSDC010_STATUS_DATA_CRC_FAIL | FTSDC010_STATUS_DATA_TIMEOUT)
+#define FTSDC010_STATUS_DATA_MASK	\
+	(FTSDC010_STATUS_DATA_ERROR | FTSDC010_STATUS_DATA_CRC_OK \
+	| FTSDC010_STATUS_DATA_END)
 
 /* 0x2c - clear register */
 #define FTSDC010_CLR_RSP_CRC_FAIL		(1 << 0)
@@ -192,21 +202,24 @@ int ftsdc010_mmc_init(int dev_index);
 #define FTSDC010_CCR_CLK_DIV(x)			(((x) & 0x7f) << 0)
 #define FTSDC010_CCR_CLK_SD			(1 << 7) /* 0: MMC, 1: SD */
 #define FTSDC010_CCR_CLK_DIS			(1 << 8)
+#define FTSDC010_CCR_CLK_HISPD			(1 << 9) /* high speed */
 
 /* card type */
 #define FTSDC010_CARD_TYPE_SD			FTSDC010_CLOCK_REG_CARD_TYPE
 #define FTSDC010_CARD_TYPE_MMC			0x0
 
 /* 0x3c - bus width register */
-#define FTSDC010_BWR_SINGLE_BUS			(1 << 0)
-#define FTSDC010_BWR_WIDE_8_BUS			(1 << 1)
-#define FTSDC010_BWR_WIDE_4_BUS			(1 << 2)
-#define FTSDC010_BWR_WIDE_BUS_SUPPORT(x)	(((x) >> 3) & 0x3)
-#define FTSDC010_BWR_CARD_DETECT		(1 << 5)
-
-#define FTSDC010_BWR_1_BUS_SUPPORT		0x0
-#define FTSDC010_BWR_4_BUS_SUPPORT		0x1
-#define FTSDC010_BWR_8_BUS_SUPPORT		0x2
+#define FTSDC010_BWR_MODE_1BIT      (1 << 0) /* 1 bit mode enabled */
+#define FTSDC010_BWR_MODE_8BIT      (1 << 1) /* 8 bit mode enabled */
+#define FTSDC010_BWR_MODE_4BIT      (1 << 2) /* 4 bit mode enabled */
+#define FTSDC010_BWR_MODE_MASK      (7 << 0)
+#define FTSDC010_BWR_MODE_SHIFT     (0)
+#define FTSDC010_BWR_CAPS_1BIT      (0 << 3) /* 1 bits mode supported */
+#define FTSDC010_BWR_CAPS_4BIT      (1 << 3) /* 1,4 bits mode supported */
+#define FTSDC010_BWR_CAPS_8BIT      (2 << 3) /* 1,4,8 bits mode supported */
+#define FTSDC010_BWR_CAPS_MASK      (3 << 3)
+#define FTSDC010_BWR_CAPS_SHIFT     (3)
+#define FTSDC010_BWR_CARD_DETECT    (1 << 5)
 
 /* 0x44 or 0x9c - feature register */
 #define FTSDC010_FEATURE_FIFO_DEPTH(x)		(((x) >> 0) & 0xff)