Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriq

55 files changed, 631 insertions, 218 deletions

diff --git a/arch/arm/cpu/armv7/ls102xa/spl.c b/arch/arm/cpu/armv7/ls102xa/spl.c
index 1dfbf54802..02890584a5 100644
--- a/arch/arm/cpu/armv7/ls102xa/spl.c
+++ b/arch/arm/cpu/armv7/ls102xa/spl.c
@@ -20,7 +20,7 @@ u32 spl_boot_mode(void)
 	switch (spl_boot_device()) {
 	case BOOT_DEVICE_MMC1:
 #ifdef CONFIG_SPL_FAT_SUPPORT
-		return MMCSD_MODE_FAT;
+		return MMCSD_MODE_FS;
 #else
 		return MMCSD_MODE_RAW;
 #endif
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
index d93990036b..9a5a6b53f7 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
@@ -396,9 +396,6 @@ static inline void final_mmu_setup(void)
 	flush_dcache_range((ulong)level0_table,
 			   (ulong)level0_table + gd->arch.tlb_size);
 
-#ifdef CONFIG_SYS_DPAA_FMAN
-	flush_dcache_all();
-#endif
 	/* point TTBR to the new table */
 	set_ttbr_tcr_mair(el, (u64)level0_table, LAYERSCAPE_TCR_FINAL,
 			  MEMORY_ATTRIBUTES);
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fdt.c b/arch/arm/cpu/armv8/fsl-layerscape/fdt.c
index 1e875c4b08..d17227ab2b 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/fdt.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/fdt.c
@@ -20,6 +20,8 @@
 #ifdef CONFIG_MP
 #include <asm/arch/mp.h>
 #endif
+#include <fsl_sec.h>
+#include <asm/arch-fsl-layerscape/soc.h>
 
 int fdt_fixup_phy_connection(void *blob, int offset, phy_interface_t phyc)
 {
@@ -75,6 +77,23 @@ void ft_fixup_cpu(void *blob)
 
 void ft_cpu_setup(void *blob, bd_t *bd)
 {
+#ifdef CONFIG_FSL_LSCH2
+	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	unsigned int svr = in_be32(&gur->svr);
+
+	/* delete crypto node if not on an E-processor */
+	if (!IS_E_PROCESSOR(svr))
+		fdt_fixup_crypto_node(blob, 0);
+#if CONFIG_SYS_FSL_SEC_COMPAT >= 4
+	else {
+		ccsr_sec_t __iomem *sec;
+
+		sec = (void __iomem *)CONFIG_SYS_FSL_SEC_ADDR;
+		fdt_fixup_crypto_node(blob, sec_in32(&sec->secvid_ms));
+	}
+#endif
+#endif
+
 #ifdef CONFIG_MP
 	ft_fixup_cpu(blob);
 #endif
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
index 0cb010012e..0fb5c7f0cc 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
@@ -12,6 +12,8 @@
 #include <asm/io.h>
 #include <asm/global_data.h>
 #include <asm/arch-fsl-layerscape/config.h>
+#include <fsl_ddr_sdram.h>
+#include <fsl_ddr.h>
 #ifdef CONFIG_CHAIN_OF_TRUST
 #include <fsl_validate.h>
 #endif
@@ -271,6 +273,39 @@ static void erratum_a009660(void)
 #endif
 }
 
+static void erratum_a008850_early(void)
+{
+#ifdef CONFIG_SYS_FSL_ERRATUM_A008850
+	/* part 1 of 2 */
+	struct ccsr_cci400 __iomem *cci = (void *)CONFIG_SYS_CCI400_ADDR;
+	struct ccsr_ddr __iomem *ddr = (void *)CONFIG_SYS_FSL_DDR_ADDR;
+
+	/* disables propagation of barrier transactions to DDRC from CCI400 */
+	out_le32(&cci->ctrl_ord, CCI400_CTRLORD_TERM_BARRIER);
+
+	/* disable the re-ordering in DDRC */
+	ddr_out32(&ddr->eor, DDR_EOR_RD_REOD_DIS | DDR_EOR_WD_REOD_DIS);
+#endif
+}
+
+void erratum_a008850_post(void)
+{
+#ifdef CONFIG_SYS_FSL_ERRATUM_A008850
+	/* part 2 of 2 */
+	struct ccsr_cci400 __iomem *cci = (void *)CONFIG_SYS_CCI400_ADDR;
+	struct ccsr_ddr __iomem *ddr = (void *)CONFIG_SYS_FSL_DDR_ADDR;
+	u32 tmp;
+
+	/* enable propagation of barrier transactions to DDRC from CCI400 */
+	out_le32(&cci->ctrl_ord, CCI400_CTRLORD_EN_BARRIER);
+
+	/* enable the re-ordering in DDRC */
+	tmp = ddr_in32(&ddr->eor);
+	tmp &= ~(DDR_EOR_RD_REOD_DIS | DDR_EOR_WD_REOD_DIS);
+	ddr_out32(&ddr->eor, tmp);
+#endif
+}
+
 void fsl_lsch2_early_init_f(void)
 {
 	struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR;
@@ -295,6 +330,7 @@ void fsl_lsch2_early_init_f(void)
 		 CCI400_DVM_MESSAGE_REQ_EN | CCI400_SNOOP_REQ_EN);
 
 	/* Erratum */
+	erratum_a008850_early(); /* part 1 of 2 */
 	erratum_a009929();
 	erratum_a009660();
 }
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/spl.c b/arch/arm/cpu/armv8/fsl-layerscape/spl.c
index c1229c88af..5883c002be 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/spl.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/spl.c
@@ -29,7 +29,7 @@ u32 spl_boot_mode(void)
 	switch (spl_boot_device()) {
 	case BOOT_DEVICE_MMC1:
 #ifdef CONFIG_SPL_FAT_SUPPORT
-		return MMCSD_MODE_FAT;
+		return MMCSD_MODE_FS;
 #else
 		return MMCSD_MODE_RAW;
 #endif
@@ -49,9 +49,6 @@ void board_init_f(ulong dummy)
 #ifdef CONFIG_LS2080A
 	arch_cpu_init();
 #endif
-#ifdef CONFIG_FSL_IFC
-	init_early_memctl_regs();
-#endif
 	board_early_init_f();
 	timer_init();
 #ifdef CONFIG_LS2080A
diff --git a/arch/arm/dts/fsl-ls1043a.dtsi b/arch/arm/dts/fsl-ls1043a.dtsi
index 66b409a05c..bf1dfe6db6 100644
--- a/arch/arm/dts/fsl-ls1043a.dtsi
+++ b/arch/arm/dts/fsl-ls1043a.dtsi
@@ -240,8 +240,9 @@
 			compatible = "fsl,vf610-qspi";
 			#address-cells = <1>;
 			#size-cells = <0>;
-			reg = <0x1550000 0x10000>,
-				<0x40000000 0x4000000>;
+			reg = <0x0 0x1550000 0x0 0x10000>,
+				<0x0 0x40000000 0x0 0x4000000>;
+			reg-names = "QuadSPI", "QuadSPI-memory";
 			num-cs = <2>;
 			big-endian;
 			status = "disabled";
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/config.h b/arch/arm/include/asm/arch-fsl-layerscape/config.h
index 10d17b2bef..fbdaa52c32 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/config.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/config.h
@@ -134,8 +134,10 @@
 #define CONFIG_SYS_FSL_ERRATUM_A008751
 #define CONFIG_SYS_FSL_ERRATUM_A009635
 #define CONFIG_SYS_FSL_ERRATUM_A009663
+#define CONFIG_SYS_FSL_ERRATUM_A009801
 #define CONFIG_SYS_FSL_ERRATUM_A009803
 #define CONFIG_SYS_FSL_ERRATUM_A009942
+#define CONFIG_SYS_FSL_ERRATUM_A010165
 
 /* ARM A57 CORE ERRATA */
 #define CONFIG_ARM_ERRATA_826974
@@ -143,6 +145,7 @@
 #define CONFIG_ARM_ERRATA_829520
 #define CONFIG_ARM_ERRATA_833471
 
+#define CONFIG_SYS_FSL_MAX_NUM_OF_SEC		1
 #elif defined(CONFIG_LS1043A)
 #define CONFIG_MAX_CPUS				4
 #define CONFIG_SYS_CACHELINE_SIZE		64
@@ -191,10 +194,12 @@
 #define GICD_BASE		0x01401000
 #define GICC_BASE		0x01402000
 
+#define CONFIG_SYS_FSL_ERRATUM_A008850
 #define CONFIG_SYS_FSL_ERRATUM_A009663
 #define CONFIG_SYS_FSL_ERRATUM_A009929
 #define CONFIG_SYS_FSL_ERRATUM_A009942
 #define CONFIG_SYS_FSL_ERRATUM_A009660
+#define CONFIG_SYS_FSL_MAX_NUM_OF_SEC		1
 #else
 #error SoC not defined
 #endif
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
index 0bad0c70b8..57b99d4084 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
@@ -37,8 +37,6 @@
 #define CONFIG_SYS_PCIE1_ADDR			(CONFIG_SYS_IMMR + 0x2400000)
 #define CONFIG_SYS_PCIE2_ADDR			(CONFIG_SYS_IMMR + 0x2500000)
 #define CONFIG_SYS_PCIE3_ADDR			(CONFIG_SYS_IMMR + 0x2600000)
-#define CONFIG_SYS_FSL_SEC_ADDR			(CONFIG_SYS_IMMR + 0x700000)
-#define CONFIG_SYS_FSL_JR0_ADDR			(CONFIG_SYS_IMMR + 0x710000)
 #define CONFIG_SYS_SEC_MON_ADDR			(CONFIG_SYS_IMMR + 0xe90000)
 #define CONFIG_SYS_SFP_ADDR			(CONFIG_SYS_IMMR + 0xe80200)
 
@@ -157,6 +155,13 @@ struct sys_info {
 #define CONFIG_SYS_FSL_FM1_DTSEC1_ADDR		\
 		(CONFIG_SYS_IMMR + CONFIG_SYS_FSL_FM1_DTSEC1_OFFSET)
 
+#define CONFIG_SYS_FSL_SEC_OFFSET		0x700000ull
+#define CONFIG_SYS_FSL_JR0_OFFSET		0x710000ull
+#define CONFIG_SYS_FSL_SEC_ADDR \
+	(CONFIG_SYS_IMMR + CONFIG_SYS_FSL_SEC_OFFSET)
+#define CONFIG_SYS_FSL_JR0_ADDR \
+	(CONFIG_SYS_IMMR + CONFIG_SYS_FSL_JR0_OFFSET)
+
 /* Device Configuration and Pin Control */
 struct ccsr_gur {
 	u32     porsr1;         /* POR status 1 */
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
index 1d3b33671f..65b3357009 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
@@ -77,8 +77,12 @@
 #define CONFIG_SYS_SFP_ADDR		(CONFIG_SYS_IMMR + 0x00e80200)
 
 /* SEC */
-#define CONFIG_SYS_FSL_SEC_ADDR		(CONFIG_SYS_IMMR + 0x07000000)
-#define CONFIG_SYS_FSL_JR0_ADDR		(CONFIG_SYS_IMMR + 0x07010000)
+#define CONFIG_SYS_FSL_SEC_OFFSET		0x07000000ull
+#define CONFIG_SYS_FSL_JR0_OFFSET		0x07010000ull
+#define CONFIG_SYS_FSL_SEC_ADDR \
+	(CONFIG_SYS_IMMR + CONFIG_SYS_FSL_SEC_OFFSET)
+#define CONFIG_SYS_FSL_JR0_ADDR \
+	(CONFIG_SYS_IMMR + CONFIG_SYS_FSL_JR0_OFFSET)
 
 /* Security Monitor */
 #define CONFIG_SYS_SEC_MON_ADDR		(CONFIG_SYS_IMMR + 0x00e90000)
diff --git a/arch/arm/include/asm/arch-ls102xa/config.h b/arch/arm/include/asm/arch-ls102xa/config.h
index d77c04a86a..04abec467c 100644
--- a/arch/arm/include/asm/arch-ls102xa/config.h
+++ b/arch/arm/include/asm/arch-ls102xa/config.h
@@ -40,6 +40,7 @@
 	(CONFIG_SYS_IMMR + CONFIG_SYS_LS102XA_USB1_OFFSET)
 
 #define CONFIG_SYS_FSL_SEC_OFFSET		0x00700000
+#define CONFIG_SYS_FSL_JR0_OFFSET		0x00710000
 #define CONFIG_SYS_LS102XA_USB1_OFFSET		0x07600000
 #define CONFIG_SYS_TSEC1_OFFSET			0x01d10000
 #define CONFIG_SYS_TSEC2_OFFSET			0x01d50000
@@ -131,6 +132,7 @@
 #define CONFIG_USB_MAX_CONTROLLER_COUNT		1
 #define CONFIG_SYS_FSL_ERRATUM_A008378
 #define CONFIG_SYS_FSL_ERRATUM_A009663
+#define CONFIG_SYS_FSL_MAX_NUM_OF_SEC		1
 #else
 #error SoC not defined
 #endif
diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h
index 3ab04bf998..ac37e4f8e6 100644
--- a/arch/arm/include/asm/arch-mx6/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx6/imx-regs.h
@@ -227,8 +227,13 @@
 #define CAAM_BASE_ADDR              (ATZ2_BASE_ADDR)
 #define ARM_BASE_ADDR		    (ATZ2_BASE_ADDR + 0x40000)
 
-#define CONFIG_SYS_FSL_SEC_ADDR     CAAM_BASE_ADDR
-#define CONFIG_SYS_FSL_JR0_ADDR     (CAAM_BASE_ADDR + 0x1000)
+#define CONFIG_SYS_FSL_SEC_OFFSET   0
+#define CONFIG_SYS_FSL_SEC_ADDR     (CAAM_BASE_ADDR + \
+				     CONFIG_SYS_FSL_SEC_OFFSET)
+#define CONFIG_SYS_FSL_JR0_OFFSET   0x1000
+#define CONFIG_SYS_FSL_JR0_ADDR     (CAAM_BASE_ADDR + \
+				     CONFIG_SYS_FSL_JR0_OFFSET)
+#define CONFIG_SYS_FSL_MAX_NUM_OF_SEC	1
 
 #define USB_PL301_BASE_ADDR         (AIPS2_OFF_BASE_ADDR + 0x0000)
 #define USB_BASE_ADDR               (AIPS2_OFF_BASE_ADDR + 0x4000)
diff --git a/arch/arm/include/asm/arch-mx7/imx-regs.h b/arch/arm/include/asm/arch-mx7/imx-regs.h
index a3106e7e6b..74917f0e69 100644
--- a/arch/arm/include/asm/arch-mx7/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx7/imx-regs.h
@@ -218,10 +218,13 @@
 
 #define FEC_QUIRK_ENET_MAC
 #define SNVS_LPGPR	0x68
-
-#define CONFIG_SYS_FSL_SEC_ADDR         (CAAM_IPS_BASE_ADDR)
-#define CONFIG_SYS_FSL_JR0_ADDR         (CONFIG_SYS_FSL_SEC_ADDR  + 0x1000)
-
+#define CONFIG_SYS_FSL_SEC_OFFSET       0
+#define CONFIG_SYS_FSL_SEC_ADDR         (CAAM_IPS_BASE_ADDR + \
+					 CONFIG_SYS_FSL_SEC_OFFSET)
+#define CONFIG_SYS_FSL_JR0_OFFSET       0x1000
+#define CONFIG_SYS_FSL_JR0_ADDR         (CONFIG_SYS_FSL_SEC_ADDR + \
+					 CONFIG_SYS_FSL_JR0_OFFSET)
+#define CONFIG_SYS_FSL_MAX_NUM_OF_SEC   1
 #if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
 #include <asm/imx-common/regs-lcdif.h>
 #include <asm/types.h>
diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c
index f168375b45..61f5639e0d 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu_init.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c
@@ -958,6 +958,15 @@ int cpu_init_r(void)
 
 #ifdef CONFIG_FSL_CAAM
 	sec_init();
+
+#if defined(CONFIG_PPC_C29X)
+	if ((SVR_SOC_VER(svr) == SVR_C292) ||
+	    (SVR_SOC_VER(svr) == SVR_C293))
+		sec_init_idx(1);
+
+	if (SVR_SOC_VER(svr) == SVR_C293)
+		sec_init_idx(2);
+#endif
 #endif
 
 #if defined(CONFIG_FSL_SATA_V2) && defined(CONFIG_FSL_SATA_ERRATUM_A001)
diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index eccc146dae..505d355bc8 100644
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -928,6 +928,8 @@ defined(CONFIG_PPC_T1014) || defined(CONFIG_PPC_T1013)
 #define CONFIG_SYS_FSL_IFC_BANK_COUNT	8
 #define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000
 #define CONFIG_SYS_FSL_ERRATUM_A005125
+#define CONFIG_SYS_FSL_MAX_NUM_OF_SEC	3
+#define CONFIG_SYS_FSL_SEC_IDX_OFFSET	0x20000
 
 #elif defined(CONFIG_QEMU_E500)
 #define CONFIG_MAX_CPUS			1
@@ -954,4 +956,8 @@ defined(CONFIG_PPC_T1014) || defined(CONFIG_PPC_T1013)
 #define CONFIG_SYS_FSL_DDRC_GEN3
 #endif
 
+#if !defined(CONFIG_PPC_C29X)
+#define CONFIG_SYS_FSL_MAX_NUM_OF_SEC	1
+#endif
+
 #endif /* _ASM_MPC85xx_CONFIG_H_ */
diff --git a/board/freescale/c29xpcie/c29xpcie.c b/board/freescale/c29xpcie/c29xpcie.c
index e325b4db4a..45f463f01f 100644
--- a/board/freescale/c29xpcie/c29xpcie.c
+++ b/board/freescale/c29xpcie/c29xpcie.c
@@ -122,7 +122,7 @@ void fdt_del_sec(void *blob, int offset)
 
 	while ((nodeoff = fdt_node_offset_by_compat_reg(blob, "fsl,sec-v6.0",
 			CONFIG_SYS_CCSRBAR_PHYS + CONFIG_SYS_FSL_SEC_OFFSET
-			+ offset * 0x20000)) >= 0) {
+			+ offset * CONFIG_SYS_FSL_SEC_IDX_OFFSET)) >= 0) {
 		fdt_del_node(blob, nodeoff);
 		offset++;
 	}
diff --git a/board/freescale/common/ls102xa_stream_id.c b/board/freescale/common/ls102xa_stream_id.c
index f43426991b..3d5404ee10 100644
--- a/board/freescale/common/ls102xa_stream_id.c
+++ b/board/freescale/common/ls102xa_stream_id.c
@@ -10,11 +10,11 @@
 
 void ls102xa_config_smmu_stream_id(struct smmu_stream_id *id, uint32_t num)
 {
-	uint32_t *scfg = (uint32_t *)CONFIG_SYS_FSL_SCFG_ADDR;
+	void *scfg = (void *)CONFIG_SYS_FSL_SCFG_ADDR;
 	int i;
 
 	for (i = 0; i < num; i++)
-		out_be32(scfg + id[i].offset, id[i].stream_id);
+		out_be32((u32 *)(scfg + id[i].offset), id[i].stream_id);
 }
 
 void ls1021x_config_caam_stream_id(struct liodn_id_table *tbl, int size)
@@ -28,6 +28,6 @@ void ls1021x_config_caam_stream_id(struct liodn_id_table *tbl, int size)
 		else
 			liodn = tbl[i].id[0];
 
-		out_le32((uint32_t *)(tbl[i].reg_offset), liodn);
+		out_le32((u32 *)(tbl[i].reg_offset), liodn);
 	}
 }
diff --git a/board/freescale/ls1043aqds/ddr.c b/board/freescale/ls1043aqds/ddr.c
index 3d3c53385a..0fd835d74f 100644
--- a/board/freescale/ls1043aqds/ddr.c
+++ b/board/freescale/ls1043aqds/ddr.c
@@ -116,6 +116,7 @@ phys_size_t initdram(int board_type)
 
 	dram_size = fsl_ddr_sdram();
 #endif
+	erratum_a008850_post();
 
 #ifdef CONFIG_FSL_DEEP_SLEEP
 	fsl_dp_ddr_restore();
diff --git a/board/freescale/ls1043aqds/ddr.h b/board/freescale/ls1043aqds/ddr.h
index 8adb660012..d3f40822b7 100644
--- a/board/freescale/ls1043aqds/ddr.h
+++ b/board/freescale/ls1043aqds/ddr.h
@@ -7,6 +7,8 @@
 #ifndef __DDR_H__
 #define __DDR_H__
 
+extern void erratum_a008850_post(void);
+
 struct board_specific_parameters {
 	u32 n_ranks;
 	u32 datarate_mhz_high;
diff --git a/board/freescale/ls1043aqds/ls1043aqds.c b/board/freescale/ls1043aqds/ls1043aqds.c
index fba6b88951..ca393e862d 100644
--- a/board/freescale/ls1043aqds/ls1043aqds.c
+++ b/board/freescale/ls1043aqds/ls1043aqds.c
@@ -307,14 +307,6 @@ int misc_init_r(void)
 
 int board_init(void)
 {
-	struct ccsr_cci400 *cci = (struct ccsr_cci400 *)
-				   CONFIG_SYS_CCI400_ADDR;
-
-	/* Set CCI-400 control override register to enable barrier
-	 * transaction */
-	out_le32(&cci->ctrl_ord,
-		 CCI400_CTRLORD_EN_BARRIER);
-
 	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
 	board_retimer_init();
 
@@ -325,10 +317,6 @@ int board_init(void)
 #ifdef CONFIG_LAYERSCAPE_NS_ACCESS
 	enable_layerscape_ns_access();
 #endif
-
-#ifdef CONFIG_ENV_IS_NOWHERE
-	gd->env_addr = (ulong)&default_environment[0];
-#endif
 	return 0;
 }
 
diff --git a/board/freescale/ls1043ardb/cpld.c b/board/freescale/ls1043ardb/cpld.c
index 78c28246a8..c6452830ed 100644
--- a/board/freescale/ls1043ardb/cpld.c
+++ b/board/freescale/ls1043ardb/cpld.c
@@ -28,10 +28,18 @@ void cpld_write(unsigned int reg, u8 value)
 /* Set the boot bank to the alternate bank */
 void cpld_set_altbank(void)
 {
+	u16 reg = CPLD_CFG_RCW_SRC_NOR;
 	u8 reg4 = CPLD_READ(soft_mux_on);
+	u8 reg5 = (u8)(reg >> 1);
+	u8 reg6 = (u8)(reg & 1);
 	u8 reg7 = CPLD_READ(vbank);
 
-	CPLD_WRITE(soft_mux_on, reg4 | CPLD_SW_MUX_BANK_SEL);
+	cpld_rev_bit(&reg5);
+
+	CPLD_WRITE(soft_mux_on, reg4 | CPLD_SW_MUX_BANK_SEL | 1);
+
+	CPLD_WRITE(cfg_rcw_src1, reg5);
+	CPLD_WRITE(cfg_rcw_src2, reg6);
 
 	reg7 = (reg7 & ~CPLD_BANK_SEL_MASK) | CPLD_BANK_SEL_ALTBANK;
 	CPLD_WRITE(vbank, reg7);
@@ -42,7 +50,21 @@ void cpld_set_altbank(void)
 /* Set the boot bank to the default bank */
 void cpld_set_defbank(void)
 {
-	CPLD_WRITE(global_rst, 1);
+	u16 reg = CPLD_CFG_RCW_SRC_NOR;
+	u8 reg4 = CPLD_READ(soft_mux_on);
+	u8 reg5 = (u8)(reg >> 1);
+	u8 reg6 = (u8)(reg & 1);
+
+	cpld_rev_bit(&reg5);
+
+	CPLD_WRITE(soft_mux_on, reg4 | CPLD_SW_MUX_BANK_SEL | 1);
+
+	CPLD_WRITE(cfg_rcw_src1, reg5);
+	CPLD_WRITE(cfg_rcw_src2, reg6);
+
+	CPLD_WRITE(vbank, 0);
+
+	CPLD_WRITE(system_rst, 1);
 }
 
 void cpld_set_nand(void)
diff --git a/board/freescale/ls1043ardb/cpld.h b/board/freescale/ls1043ardb/cpld.h
index bd59c0e5d5..cb175b56fa 100644
--- a/board/freescale/ls1043ardb/cpld.h
+++ b/board/freescale/ls1043ardb/cpld.h
@@ -40,6 +40,7 @@ void cpld_rev_bit(unsigned char *value);
 #define CPLD_SW_MUX_BANK_SEL	0x40
 #define CPLD_BANK_SEL_MASK	0x07
 #define CPLD_BANK_SEL_ALTBANK	0x04
+#define CPLD_CFG_RCW_SRC_NOR	0x025
 #define CPLD_CFG_RCW_SRC_NAND	0x106
 #define CPLD_CFG_RCW_SRC_SD	0x040
 #endif
diff --git a/board/freescale/ls1043ardb/ddr.c b/board/freescale/ls1043ardb/ddr.c
index 11bc0f24d9..1e2fd2ed0c 100644
--- a/board/freescale/ls1043ardb/ddr.c
+++ b/board/freescale/ls1043ardb/ddr.c
@@ -177,6 +177,8 @@ phys_size_t initdram(int board_type)
 #else
 	dram_size =  fsl_ddr_sdram_size();
 #endif
+	erratum_a008850_post();
+
 #ifdef CONFIG_FSL_DEEP_SLEEP
 	fsl_dp_ddr_restore();
 #endif
diff --git a/board/freescale/ls1043ardb/ddr.h b/board/freescale/ls1043ardb/ddr.h
index b17eb80885..8ca166b3ac 100644
--- a/board/freescale/ls1043ardb/ddr.h
+++ b/board/freescale/ls1043ardb/ddr.h
@@ -6,6 +6,9 @@
 
 #ifndef __DDR_H__
 #define __DDR_H__
+
+extern void erratum_a008850_post(void);
+
 struct board_specific_parameters {
 	u32 n_ranks;
 	u32 datarate_mhz_high;
diff --git a/board/freescale/ls1043ardb/ls1043ardb.c b/board/freescale/ls1043ardb/ls1043ardb.c
index ec5fdbfe27..14365207da 100644
--- a/board/freescale/ls1043ardb/ls1043ardb.c
+++ b/board/freescale/ls1043ardb/ls1043ardb.c
@@ -19,7 +19,6 @@
 #include <fsl_csu.h>
 #include <fsl_esdhc.h>
 #include <fsl_ifc.h>
-#include <environment.h>
 #include <fsl_sec.h>
 #include "cpld.h"
 #ifdef CONFIG_U_QE
@@ -31,12 +30,12 @@ DECLARE_GLOBAL_DATA_PTR;
 
 int checkboard(void)
 {
-	static const char *freq[3] = {"100.00MHZ", "156.25MHZ"};
+	static const char *freq[2] = {"100.00MHZ", "156.25MHZ"};
 #ifndef CONFIG_SD_BOOT
 	u8 cfg_rcw_src1, cfg_rcw_src2;
-	u32 cfg_rcw_src;
+	u16 cfg_rcw_src;
 #endif
-	u32 sd1refclk_sel;
+	u8 sd1refclk_sel;
 
 	printf("Board: LS1043ARDB, boot from ");
 
@@ -83,22 +82,12 @@ int board_early_init_f(void)
 
 int board_init(void)
 {
-	struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR;
-
-	/*
-	 * Set CCI-400 control override register to enable barrier
-	 * transaction
-	 */
-	out_le32(&cci->ctrl_ord, CCI400_CTRLORD_EN_BARRIER);
+	struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR;
 
 #ifdef CONFIG_FSL_IFC
 	init_final_memctl_regs();
 #endif
 
-#ifdef CONFIG_ENV_IS_NOWHERE
-	gd->env_addr = (ulong)&default_environment[0];
-#endif
-
 #ifdef CONFIG_LAYERSCAPE_NS_ACCESS
 	enable_layerscape_ns_access();
 #endif
@@ -106,6 +95,8 @@ int board_init(void)
 #ifdef CONFIG_U_QE
 	u_qe_init();
 #endif
+	/* invert AQR105 IRQ pins polarity */
+	out_be32(&scfg->intpcr, AQR105_IRQ_MASK);
 
 	return 0;
 }
diff --git a/board/freescale/ls2080aqds/MAINTAINERS b/board/freescale/ls2080aqds/MAINTAINERS
index 7d3bfc8e4e..076532622f 100644
--- a/board/freescale/ls2080aqds/MAINTAINERS
+++ b/board/freescale/ls2080aqds/MAINTAINERS
@@ -1,5 +1,5 @@
 LS2080A BOARD
-M:	Prabhakar Kushwaha <prabhakar@freescale.com>
+M:	Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
 S:	Maintained
 F:	board/freescale/ls2080aqds/
 F:	board/freescale/ls2080a/ls2080aqds.c
diff --git a/board/freescale/ls2080ardb/MAINTAINERS b/board/freescale/ls2080ardb/MAINTAINERS
index 5562917ec9..a20c003ce7 100644
--- a/board/freescale/ls2080ardb/MAINTAINERS
+++ b/board/freescale/ls2080ardb/MAINTAINERS
@@ -1,5 +1,5 @@
 LS2080A BOARD
-M:	Prabhakar Kushwaha <prabhakar@freescale.com>
+M:	Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
 S:	Maintained
 F:	board/freescale/ls2080ardb/
 F:	board/freescale/ls2080a/ls2080ardb.c
diff --git a/board/freescale/ls2080ardb/ddr.h b/board/freescale/ls2080ardb/ddr.h
index bda9d4a40f..b3c6306b8f 100644
--- a/board/freescale/ls2080ardb/ddr.h
+++ b/board/freescale/ls2080ardb/ddr.h
@@ -29,9 +29,9 @@ static const struct board_specific_parameters udimm0[] = {
 	 * ranks| mhz| GB  |adjst| start |   ctl2    |  ctl3
 	 */
 	{2,  1350, 0, 4,     6, 0x0708090B, 0x0C0D0E09,},
-	{2,  1666, 0, 4,     8, 0x08090B0D, 0x0E10100C,},
-	{2,  1900, 0, 4,     8, 0x090A0C0E, 0x1012120D,},
-	{2,  2300, 0, 4,     9, 0x0A0B0C10, 0x1114140E,},
+	{2,  1666, 0, 5,     9, 0x090A0B0E, 0x0F11110C,},
+	{2,  1900, 0, 6,   0xA, 0x0B0C0E11, 0x1214140F,},
+	{2,  2300, 0, 6,   0xB, 0x0C0D0F12, 0x14161610,},
 	{}
 };
 
diff --git a/configs/ls1021aqds_ddr4_nor_defconfig b/configs/ls1021aqds_ddr4_nor_defconfig
index 6feb581d6e..04ded544d8 100644
--- a/configs/ls1021aqds_ddr4_nor_defconfig
+++ b/configs/ls1021aqds_ddr4_nor_defconfig
@@ -4,6 +4,9 @@ CONFIG_DM_SERIAL=y
 CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds-duart"
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_OF_LIBFDT=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
 CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4"
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_BOOTZ=y
diff --git a/configs/ls1021aqds_ddr4_nor_lpuart_defconfig b/configs/ls1021aqds_ddr4_nor_lpuart_defconfig
index 563af4802e..7915200ca1 100644
--- a/configs/ls1021aqds_ddr4_nor_lpuart_defconfig
+++ b/configs/ls1021aqds_ddr4_nor_lpuart_defconfig
@@ -4,6 +4,9 @@ CONFIG_DM_SERIAL=y
 CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds-lpuart"
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_OF_LIBFDT=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
 CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4,LPUART"
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_BOOTZ=y
diff --git a/configs/ls1021aqds_nand_defconfig b/configs/ls1021aqds_nand_defconfig
index 0786f20aaf..9002a014fe 100644
--- a/configs/ls1021aqds_nand_defconfig
+++ b/configs/ls1021aqds_nand_defconfig
@@ -22,3 +22,5 @@ CONFIG_NETDEVICES=y
 CONFIG_E1000=y
 CONFIG_SYS_NS16550=y
 CONFIG_OF_LIBFDT=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
diff --git a/configs/ls1021aqds_nor_SECURE_BOOT_defconfig b/configs/ls1021aqds_nor_SECURE_BOOT_defconfig
index 243fcddc0c..30c2ca5576 100644
--- a/configs/ls1021aqds_nor_SECURE_BOOT_defconfig
+++ b/configs/ls1021aqds_nor_SECURE_BOOT_defconfig
@@ -24,3 +24,5 @@ CONFIG_E1000=y
 CONFIG_SYS_NS16550=y
 CONFIG_RSA=y
 CONFIG_OF_LIBFDT=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
diff --git a/configs/ls1021aqds_nor_defconfig b/configs/ls1021aqds_nor_defconfig
index 3cecdfe424..a30153aa3a 100644
--- a/configs/ls1021aqds_nor_defconfig
+++ b/configs/ls1021aqds_nor_defconfig
@@ -4,6 +4,9 @@ CONFIG_DM_SERIAL=y
 CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds-duart"
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_OF_LIBFDT=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_GREPENV=y
diff --git a/configs/ls1021aqds_nor_lpuart_defconfig b/configs/ls1021aqds_nor_lpuart_defconfig
index 75b763e03a..217cf88a1f 100644
--- a/configs/ls1021aqds_nor_lpuart_defconfig
+++ b/configs/ls1021aqds_nor_lpuart_defconfig
@@ -4,6 +4,9 @@ CONFIG_DM_SERIAL=y
 CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds-lpuart"
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_OF_LIBFDT=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
 CONFIG_SYS_EXTRA_OPTIONS="LPUART"
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_BOOTZ=y
diff --git a/configs/ls1021aqds_qspi_defconfig b/configs/ls1021aqds_qspi_defconfig
index c47fbce801..15b0b0d686 100644
--- a/configs/ls1021aqds_qspi_defconfig
+++ b/configs/ls1021aqds_qspi_defconfig
@@ -4,6 +4,9 @@ CONFIG_DM_SPI=y
 CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds-duart"
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_OF_LIBFDT=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
 CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT"
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_BOOTZ=y
diff --git a/configs/ls1021aqds_sdcard_ifc_defconfig b/configs/ls1021aqds_sdcard_ifc_defconfig
index 61ab25106c..ef42d3d99c 100644
--- a/configs/ls1021aqds_sdcard_ifc_defconfig
+++ b/configs/ls1021aqds_sdcard_ifc_defconfig
@@ -1,6 +1,9 @@
 CONFIG_ARM=y
 CONFIG_TARGET_LS1021AQDS=y
 CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds-duart"
+CONFIG_OF_LIBFDT=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,SD_BOOT"
 CONFIG_HUSH_PARSER=y
diff --git a/configs/ls1021aqds_sdcard_qspi_defconfig b/configs/ls1021aqds_sdcard_qspi_defconfig
index bb887431ba..69f5b612aa 100644
--- a/configs/ls1021aqds_sdcard_qspi_defconfig
+++ b/configs/ls1021aqds_sdcard_qspi_defconfig
@@ -2,6 +2,9 @@ CONFIG_ARM=y
 CONFIG_TARGET_LS1021AQDS=y
 CONFIG_DM_SPI=y
 CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds-duart"
+CONFIG_OF_LIBFDT=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,SD_BOOT,SD_BOOT_QSPI"
 CONFIG_HUSH_PARSER=y
diff --git a/configs/ls1021atwr_nor_SECURE_BOOT_defconfig b/configs/ls1021atwr_nor_SECURE_BOOT_defconfig
index a5cbb22e46..1c0ae06c4b 100644
--- a/configs/ls1021atwr_nor_SECURE_BOOT_defconfig
+++ b/configs/ls1021atwr_nor_SECURE_BOOT_defconfig
@@ -24,3 +24,5 @@ CONFIG_E1000=y
 CONFIG_SYS_NS16550=y
 CONFIG_RSA=y
 CONFIG_OF_LIBFDT=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
diff --git a/configs/ls1021atwr_nor_defconfig b/configs/ls1021atwr_nor_defconfig
index 465054fad9..10cc576e7c 100644
--- a/configs/ls1021atwr_nor_defconfig
+++ b/configs/ls1021atwr_nor_defconfig
@@ -4,6 +4,9 @@ CONFIG_DM_SERIAL=y
 CONFIG_DEFAULT_DEVICE_TREE="ls1021a-twr-duart"
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_OF_LIBFDT=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_GREPENV=y
diff --git a/configs/ls1021atwr_nor_lpuart_defconfig b/configs/ls1021atwr_nor_lpuart_defconfig
index e96e31af21..f56f93117a 100644
--- a/configs/ls1021atwr_nor_lpuart_defconfig
+++ b/configs/ls1021atwr_nor_lpuart_defconfig
@@ -4,6 +4,9 @@ CONFIG_DM_SERIAL=y
 CONFIG_DEFAULT_DEVICE_TREE="ls1021a-twr-lpuart"
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_OF_LIBFDT=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
 CONFIG_SYS_EXTRA_OPTIONS="LPUART"
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_BOOTZ=y
diff --git a/configs/ls1021atwr_qspi_defconfig b/configs/ls1021atwr_qspi_defconfig
index 987638cfe3..bc419fbda2 100644
--- a/configs/ls1021atwr_qspi_defconfig
+++ b/configs/ls1021atwr_qspi_defconfig
@@ -4,6 +4,9 @@ CONFIG_DM_SPI=y
 CONFIG_DEFAULT_DEVICE_TREE="ls1021a-twr-duart"
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_OF_LIBFDT=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
 CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT"
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_BOOTZ=y
diff --git a/configs/ls1021atwr_sdcard_ifc_defconfig b/configs/ls1021atwr_sdcard_ifc_defconfig
index df4d428260..e27758b62d 100644
--- a/configs/ls1021atwr_sdcard_ifc_defconfig
+++ b/configs/ls1021atwr_sdcard_ifc_defconfig
@@ -21,3 +21,5 @@ CONFIG_NETDEVICES=y
 CONFIG_E1000=y
 CONFIG_SYS_NS16550=y
 CONFIG_OF_LIBFDT=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
diff --git a/configs/ls1021atwr_sdcard_qspi_defconfig b/configs/ls1021atwr_sdcard_qspi_defconfig
index 583325d80a..01856d4363 100644
--- a/configs/ls1021atwr_sdcard_qspi_defconfig
+++ b/configs/ls1021atwr_sdcard_qspi_defconfig
@@ -5,6 +5,9 @@ CONFIG_DEFAULT_DEVICE_TREE="ls1021a-twr-duart"
 CONFIG_SPL=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_OF_LIBFDT=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
 CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,SD_BOOT,SD_BOOT_QSPI"
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_BOOTZ=y
diff --git a/drivers/crypto/fsl/jr.c b/drivers/crypto/fsl/jr.c
index 8bc517dadc..510fa4e376 100644
--- a/drivers/crypto/fsl/jr.c
+++ b/drivers/crypto/fsl/jr.c
@@ -19,11 +19,26 @@
 #define CIRC_CNT(head, tail, size)	(((head) - (tail)) & (size - 1))
 #define CIRC_SPACE(head, tail, size)	CIRC_CNT((tail), (head) + 1, (size))
 
-struct jobring jr;
+uint32_t sec_offset[CONFIG_SYS_FSL_MAX_NUM_OF_SEC] = {
+	0,
+#if defined(CONFIG_PPC_C29X)
+	CONFIG_SYS_FSL_SEC_IDX_OFFSET,
+	2 * CONFIG_SYS_FSL_SEC_IDX_OFFSET
+#endif
+};
+
+#define SEC_ADDR(idx)	\
+	((CONFIG_SYS_FSL_SEC_ADDR + sec_offset[idx]))
+
+#define SEC_JR0_ADDR(idx)	\
+	(SEC_ADDR(idx) +	\
+	 (CONFIG_SYS_FSL_JR0_OFFSET - CONFIG_SYS_FSL_SEC_OFFSET))
+
+struct jobring jr0[CONFIG_SYS_FSL_MAX_NUM_OF_SEC];
 
-static inline void start_jr0(void)
+static inline void start_jr0(uint8_t sec_idx)
 {
-	ccsr_sec_t *sec = (void *)CONFIG_SYS_FSL_SEC_ADDR;
+	ccsr_sec_t *sec = (void *)SEC_ADDR(sec_idx);
 	u32 ctpr_ms = sec_in32(&sec->ctpr_ms);
 	u32 scfgr = sec_in32(&sec->scfgr);
 
@@ -42,15 +57,15 @@ static inline void start_jr0(void)
 	}
 }
 
-static inline void jr_reset_liodn(void)
+static inline void jr_reset_liodn(uint8_t sec_idx)
 {
-	ccsr_sec_t *sec = (void *)CONFIG_SYS_FSL_SEC_ADDR;
+	ccsr_sec_t *sec = (void *)SEC_ADDR(sec_idx);
 	sec_out32(&sec->jrliodnr[0].ls, 0);
 }
 
-static inline void jr_disable_irq(void)
+static inline void jr_disable_irq(uint8_t sec_idx)
 {
-	struct jr_regs *regs = (struct jr_regs *)CONFIG_SYS_FSL_JR0_ADDR;
+	struct jr_regs *regs = (struct jr_regs *)SEC_JR0_ADDR(sec_idx);
 	uint32_t jrcfg = sec_in32(&regs->jrcfg1);
 
 	jrcfg = jrcfg | JR_INTMASK;
@@ -58,11 +73,12 @@ static inline void jr_disable_irq(void)
 	sec_out32(&regs->jrcfg1, jrcfg);
 }
 
-static void jr_initregs(void)
+static void jr_initregs(uint8_t sec_idx)
 {
-	struct jr_regs *regs = (struct jr_regs *)CONFIG_SYS_FSL_JR0_ADDR;
-	phys_addr_t ip_base = virt_to_phys((void *)jr.input_ring);
-	phys_addr_t op_base = virt_to_phys((void *)jr.output_ring);
+	struct jr_regs *regs = (struct jr_regs *)SEC_JR0_ADDR(sec_idx);
+	struct jobring *jr = &jr0[sec_idx];
+	phys_addr_t ip_base = virt_to_phys((void *)jr->input_ring);
+	phys_addr_t op_base = virt_to_phys((void *)jr->output_ring);
 
 #ifdef CONFIG_PHYS_64BIT
 	sec_out32(&regs->irba_h, ip_base >> 32);
@@ -79,59 +95,63 @@ static void jr_initregs(void)
 	sec_out32(&regs->ors, JR_SIZE);
 	sec_out32(&regs->irs, JR_SIZE);
 
-	if (!jr.irq)
-		jr_disable_irq();
+	if (!jr->irq)
+		jr_disable_irq(sec_idx);
 }
 
-static int jr_init(void)
+static int jr_init(uint8_t sec_idx)
 {
-	memset(&jr, 0, sizeof(struct jobring));
+	struct jobring *jr = &jr0[sec_idx];
 
-	jr.jq_id = DEFAULT_JR_ID;
-	jr.irq = DEFAULT_IRQ;
+	memset(jr, 0, sizeof(struct jobring));
+
+	jr->jq_id = DEFAULT_JR_ID;
+	jr->irq = DEFAULT_IRQ;
 
 #ifdef CONFIG_FSL_CORENET
-	jr.liodn = DEFAULT_JR_LIODN;
+	jr->liodn = DEFAULT_JR_LIODN;
 #endif
-	jr.size = JR_SIZE;
-	jr.input_ring = (dma_addr_t *)memalign(ARCH_DMA_MINALIGN,
+	jr->size = JR_SIZE;
+	jr->input_ring = (dma_addr_t *)memalign(ARCH_DMA_MINALIGN,
 				JR_SIZE * sizeof(dma_addr_t));
-	if (!jr.input_ring)
+	if (!jr->input_ring)
 		return -1;
 
-	jr.op_size = roundup(JR_SIZE * sizeof(struct op_ring),
-			     ARCH_DMA_MINALIGN);
-	jr.output_ring =
-	    (struct op_ring *)memalign(ARCH_DMA_MINALIGN, jr.op_size);
-	if (!jr.output_ring)
+	jr->op_size = roundup(JR_SIZE * sizeof(struct op_ring),
+			      ARCH_DMA_MINALIGN);
+	jr->output_ring =
+	    (struct op_ring *)memalign(ARCH_DMA_MINALIGN, jr->op_size);
+	if (!jr->output_ring)
 		return -1;
 
-	memset(jr.input_ring, 0, JR_SIZE * sizeof(dma_addr_t));
-	memset(jr.output_ring, 0, jr.op_size);
+	memset(jr->input_ring, 0, JR_SIZE * sizeof(dma_addr_t));
+	memset(jr->output_ring, 0, jr->op_size);
 
-	start_jr0();
+	start_jr0(sec_idx);
 
-	jr_initregs();
+	jr_initregs(sec_idx);
 
 	return 0;
 }
 
-static int jr_sw_cleanup(void)
+static int jr_sw_cleanup(uint8_t sec_idx)
 {
-	jr.head = 0;
-	jr.tail = 0;
-	jr.read_idx = 0;
-	jr.write_idx = 0;
-	memset(jr.info, 0, sizeof(jr.info));
-	memset(jr.input_ring, 0, jr.size * sizeof(dma_addr_t));
-	memset(jr.output_ring, 0, jr.size * sizeof(struct op_ring));
+	struct jobring *jr = &jr0[sec_idx];
+
+	jr->head = 0;
+	jr->tail = 0;
+	jr->read_idx = 0;
+	jr->write_idx = 0;
+	memset(jr->info, 0, sizeof(jr->info));
+	memset(jr->input_ring, 0, jr->size * sizeof(dma_addr_t));
+	memset(jr->output_ring, 0, jr->size * sizeof(struct op_ring));
 
 	return 0;
 }
 
-static int jr_hw_reset(void)
+static int jr_hw_reset(uint8_t sec_idx)
 {
-	struct jr_regs *regs = (struct jr_regs *)CONFIG_SYS_FSL_JR0_ADDR;
+	struct jr_regs *regs = (struct jr_regs *)SEC_JR0_ADDR(sec_idx);
 	uint32_t timeout = 100000;
 	uint32_t jrint, jrcr;
 
@@ -161,10 +181,11 @@ static int jr_hw_reset(void)
 /* -1 --- error, can't enqueue -- no space available */
 static int jr_enqueue(uint32_t *desc_addr,
 	       void (*callback)(uint32_t status, void *arg),
-	       void *arg)
+	       void *arg, uint8_t sec_idx)
 {
-	struct jr_regs *regs = (struct jr_regs *)CONFIG_SYS_FSL_JR0_ADDR;
-	int head = jr.head;
+	struct jr_regs *regs = (struct jr_regs *)SEC_JR0_ADDR(sec_idx);
+	struct jobring *jr = &jr0[sec_idx];
+	int head = jr->head;
 	uint32_t desc_word;
 	int length = desc_len(desc_addr);
 	int i;
@@ -184,18 +205,14 @@ static int jr_enqueue(uint32_t *desc_addr,
 
 	phys_addr_t desc_phys_addr = virt_to_phys(desc_addr);
 
-	if (sec_in32(&regs->irsa) == 0 ||
-	    CIRC_SPACE(jr.head, jr.tail, jr.size) <= 0)
-		return -1;
-
-	jr.info[head].desc_phys_addr = desc_phys_addr;
-	jr.info[head].callback = (void *)callback;
-	jr.info[head].arg = arg;
-	jr.info[head].op_done = 0;
+	jr->info[head].desc_phys_addr = desc_phys_addr;
+	jr->info[head].callback = (void *)callback;
+	jr->info[head].arg = arg;
+	jr->info[head].op_done = 0;
 
-	unsigned long start = (unsigned long)&jr.info[head] &
+	unsigned long start = (unsigned long)&jr->info[head] &
 					~(ARCH_DMA_MINALIGN - 1);
-	unsigned long end = ALIGN((unsigned long)&jr.info[head] +
+	unsigned long end = ALIGN((unsigned long)&jr->info[head] +
 				  sizeof(struct jr_info), ARCH_DMA_MINALIGN);
 	flush_dcache_range(start, end);
 
@@ -205,11 +222,11 @@ static int jr_enqueue(uint32_t *desc_addr,
 	 * depend on endianness of SEC block.
 	 */
 #ifdef CONFIG_SYS_FSL_SEC_LE
-	addr_lo = (uint32_t *)(&jr.input_ring[head]);
-	addr_hi = (uint32_t *)(&jr.input_ring[head]) + 1;
+	addr_lo = (uint32_t *)(&jr->input_ring[head]);
+	addr_hi = (uint32_t *)(&jr->input_ring[head]) + 1;
 #elif defined(CONFIG_SYS_FSL_SEC_BE)
-	addr_hi = (uint32_t *)(&jr.input_ring[head]);
-	addr_lo = (uint32_t *)(&jr.input_ring[head]) + 1;
+	addr_hi = (uint32_t *)(&jr->input_ring[head]);
+	addr_lo = (uint32_t *)(&jr->input_ring[head]) + 1;
 #endif /* ifdef CONFIG_SYS_FSL_SEC_LE */
 
 	sec_out32(addr_hi, (uint32_t)(desc_phys_addr >> 32));
@@ -217,21 +234,21 @@ static int jr_enqueue(uint32_t *desc_addr,
 
 #else
 	/* Write the 32 bit Descriptor address on Input Ring. */
-	sec_out32(&jr.input_ring[head], desc_phys_addr);
+	sec_out32(&jr->input_ring[head], desc_phys_addr);
 #endif /* ifdef CONFIG_PHYS_64BIT */
 
-	start = (unsigned long)&jr.input_ring[head] & ~(ARCH_DMA_MINALIGN - 1);
-	end = ALIGN((unsigned long)&jr.input_ring[head] +
+	start = (unsigned long)&jr->input_ring[head] & ~(ARCH_DMA_MINALIGN - 1);
+	end = ALIGN((unsigned long)&jr->input_ring[head] +
 		     sizeof(dma_addr_t), ARCH_DMA_MINALIGN);
 	flush_dcache_range(start, end);
 
-	jr.head = (head + 1) & (jr.size - 1);
+	jr->head = (head + 1) & (jr->size - 1);
 
 	/* Invalidate output ring */
-	start = (unsigned long)jr.output_ring &
+	start = (unsigned long)jr->output_ring &
 					~(ARCH_DMA_MINALIGN - 1);
-	end = ALIGN((unsigned long)jr.output_ring + jr.op_size,
-		     ARCH_DMA_MINALIGN);
+	end = ALIGN((unsigned long)jr->output_ring + jr->op_size,
+		    ARCH_DMA_MINALIGN);
 	invalidate_dcache_range(start, end);
 
 	sec_out32(&regs->irja, 1);
@@ -239,11 +256,12 @@ static int jr_enqueue(uint32_t *desc_addr,
 	return 0;
 }
 
-static int jr_dequeue(void)
+static int jr_dequeue(int sec_idx)
 {
-	struct jr_regs *regs = (struct jr_regs *)CONFIG_SYS_FSL_JR0_ADDR;
-	int head = jr.head;
-	int tail = jr.tail;
+	struct jr_regs *regs = (struct jr_regs *)SEC_JR0_ADDR(sec_idx);
+	struct jobring *jr = &jr0[sec_idx];
+	int head = jr->head;
+	int tail = jr->tail;
 	int idx, i, found;
 	void (*callback)(uint32_t status, void *arg);
 	void *arg = NULL;
@@ -253,7 +271,8 @@ static int jr_dequeue(void)
 	uint32_t *addr;
 #endif
 
-	while (sec_in32(&regs->orsf) && CIRC_CNT(jr.head, jr.tail, jr.size)) {
+	while (sec_in32(&regs->orsf) && CIRC_CNT(jr->head, jr->tail,
+						 jr->size)) {
 
 		found = 0;
 
@@ -264,11 +283,11 @@ static int jr_dequeue(void)
 		 * depend on endianness of SEC block.
 		 */
 	#ifdef CONFIG_SYS_FSL_SEC_LE
-		addr_lo = (uint32_t *)(&jr.output_ring[jr.tail].desc);
-		addr_hi = (uint32_t *)(&jr.output_ring[jr.tail].desc) + 1;
+		addr_lo = (uint32_t *)(&jr->output_ring[jr->tail].desc);
+		addr_hi = (uint32_t *)(&jr->output_ring[jr->tail].desc) + 1;
 	#elif defined(CONFIG_SYS_FSL_SEC_BE)
-		addr_hi = (uint32_t *)(&jr.output_ring[jr.tail].desc);
-		addr_lo = (uint32_t *)(&jr.output_ring[jr.tail].desc) + 1;
+		addr_hi = (uint32_t *)(&jr->output_ring[jr->tail].desc);
+		addr_lo = (uint32_t *)(&jr->output_ring[jr->tail].desc) + 1;
 	#endif /* ifdef CONFIG_SYS_FSL_SEC_LE */
 
 		op_desc = ((u64)sec_in32(addr_hi) << 32) |
@@ -276,15 +295,15 @@ static int jr_dequeue(void)
 
 	#else
 		/* Read the 32 bit Descriptor address from Output Ring. */
-		addr = (uint32_t *)&jr.output_ring[jr.tail].desc;
+		addr = (uint32_t *)&jr->output_ring[jr->tail].desc;
 		op_desc = sec_in32(addr);
 	#endif /* ifdef CONFIG_PHYS_64BIT */
 
-		uint32_t status = sec_in32(&jr.output_ring[jr.tail].status);
+		uint32_t status = sec_in32(&jr->output_ring[jr->tail].status);
 
-		for (i = 0; CIRC_CNT(head, tail + i, jr.size) >= 1; i++) {
-			idx = (tail + i) & (jr.size - 1);
-			if (op_desc == jr.info[idx].desc_phys_addr) {
+		for (i = 0; CIRC_CNT(head, tail + i, jr->size) >= 1; i++) {
+			idx = (tail + i) & (jr->size - 1);
+			if (op_desc == jr->info[idx].desc_phys_addr) {
 				found = 1;
 				break;
 			}
@@ -294,9 +313,9 @@ static int jr_dequeue(void)
 		if (!found)
 			return -1;
 
-		jr.info[idx].op_done = 1;
-		callback = (void *)jr.info[idx].callback;
-		arg = jr.info[idx].arg;
+		jr->info[idx].op_done = 1;
+		callback = (void *)jr->info[idx].callback;
+		arg = jr->info[idx].arg;
 
 		/* When the job on tail idx gets done, increment
 		 * tail till the point where job completed out of oredr has
@@ -304,14 +323,14 @@ static int jr_dequeue(void)
 		 */
 		if (idx == tail)
 			do {
-				tail = (tail + 1) & (jr.size - 1);
-			} while (jr.info[tail].op_done);
+				tail = (tail + 1) & (jr->size - 1);
+			} while (jr->info[tail].op_done);
 
-		jr.tail = tail;
-		jr.read_idx = (jr.read_idx + 1) & (jr.size - 1);
+		jr->tail = tail;
+		jr->read_idx = (jr->read_idx + 1) & (jr->size - 1);
 
 		sec_out32(&regs->orjr, 1);
-		jr.info[idx].op_done = 0;
+		jr->info[idx].op_done = 0;
 
 		callback(status, arg);
 	}
@@ -327,7 +346,7 @@ static void desc_done(uint32_t status, void *arg)
 	x->done = 1;
 }
 
-int run_descriptor_jr(uint32_t *desc)
+static inline int run_descriptor_jr_idx(uint32_t *desc, uint8_t sec_idx)
 {
 	unsigned long long timeval = get_ticks();
 	unsigned long long timeout = usec2ticks(CONFIG_SEC_DEQ_TIMEOUT);
@@ -336,7 +355,7 @@ int run_descriptor_jr(uint32_t *desc)
 
 	memset(&op, 0, sizeof(op));
 
-	ret = jr_enqueue(desc, desc_done, &op);
+	ret = jr_enqueue(desc, desc_done, &op, sec_idx);
 	if (ret) {
 		debug("Error in SEC enq\n");
 		ret = JQ_ENQ_ERR;
@@ -346,7 +365,7 @@ int run_descriptor_jr(uint32_t *desc)
 	timeval = get_ticks();
 	timeout = usec2ticks(CONFIG_SEC_DEQ_TIMEOUT);
 	while (op.done != 1) {
-		ret = jr_dequeue();
+		ret = jr_dequeue(sec_idx);
 		if (ret) {
 			debug("Error in SEC deq\n");
 			ret = JQ_DEQ_ERR;
@@ -368,20 +387,30 @@ out:
 	return ret;
 }
 
-int jr_reset(void)
+int run_descriptor_jr(uint32_t *desc)
+{
+	return run_descriptor_jr_idx(desc, 0);
+}
+
+static inline int jr_reset_sec(uint8_t sec_idx)
 {
-	if (jr_hw_reset() < 0)
+	if (jr_hw_reset(sec_idx) < 0)
 		return -1;
 
 	/* Clean up the jobring structure maintained by software */
-	jr_sw_cleanup();
+	jr_sw_cleanup(sec_idx);
 
 	return 0;
 }
 
-int sec_reset(void)
+int jr_reset(void)
 {
-	ccsr_sec_t *sec = (void *)CONFIG_SYS_FSL_SEC_ADDR;
+	return jr_reset_sec(0);
+}
+
+static inline int sec_reset_idx(uint8_t sec_idx)
+{
+	ccsr_sec_t *sec = (void *)SEC_ADDR(sec_idx);
 	uint32_t mcfgr = sec_in32(&sec->mcfgr);
 	uint32_t timeout = 100000;
 
@@ -408,14 +437,13 @@ int sec_reset(void)
 	return 0;
 }
 
-static int instantiate_rng(void)
+static int instantiate_rng(uint8_t sec_idx)
 {
 	struct result op;
 	u32 *desc;
 	u32 rdsta_val;
 	int ret = 0;
-	ccsr_sec_t __iomem *sec =
-			(ccsr_sec_t __iomem *)CONFIG_SYS_FSL_SEC_ADDR;
+	ccsr_sec_t __iomem *sec = (ccsr_sec_t __iomem *)SEC_ADDR(sec_idx);
 	struct rng4tst __iomem *rng =
 			(struct rng4tst __iomem *)&sec->rng;
 
@@ -432,7 +460,7 @@ static int instantiate_rng(void)
 	flush_dcache_range((unsigned long)desc,
 			   (unsigned long)desc + size);
 
-	ret = run_descriptor_jr(desc);
+	ret = run_descriptor_jr_idx(desc, sec_idx);
 
 	if (ret)
 		printf("RNG: Instantiation failed with error %x\n", ret);
@@ -444,9 +472,14 @@ static int instantiate_rng(void)
 	return ret;
 }
 
-static u8 get_rng_vid(void)
+int sec_reset(void)
+{
+	return sec_reset_idx(0);
+}
+
+static u8 get_rng_vid(uint8_t sec_idx)
 {
-	ccsr_sec_t *sec = (void *)CONFIG_SYS_FSL_SEC_ADDR;
+	ccsr_sec_t *sec = (void *)SEC_ADDR(sec_idx);
 	u32 cha_vid = sec_in32(&sec->chavid_ls);
 
 	return (cha_vid & SEC_CHAVID_RNG_LS_MASK) >> SEC_CHAVID_LS_RNG_SHIFT;
@@ -456,10 +489,9 @@ static u8 get_rng_vid(void)
  * By default, the TRNG runs for 200 clocks per sample;
  * 1200 clocks per sample generates better entropy.
  */
-static void kick_trng(int ent_delay)
+static void kick_trng(int ent_delay, uint8_t sec_idx)
 {
-	ccsr_sec_t __iomem *sec =
-			(ccsr_sec_t __iomem *)CONFIG_SYS_FSL_SEC_ADDR;
+	ccsr_sec_t __iomem *sec = (ccsr_sec_t __iomem *)SEC_ADDR(sec_idx);
 	struct rng4tst __iomem *rng =
 			(struct rng4tst __iomem *)&sec->rng;
 	u32 val;
@@ -486,11 +518,10 @@ static void kick_trng(int ent_delay)
 	sec_clrbits32(&rng->rtmctl, RTMCTL_PRGM);
 }
 
-static int rng_init(void)
+static int rng_init(uint8_t sec_idx)
 {
 	int ret, ent_delay = RTSDCTL_ENT_DLY_MIN;
-	ccsr_sec_t __iomem *sec =
-			(ccsr_sec_t __iomem *)CONFIG_SYS_FSL_SEC_ADDR;
+	ccsr_sec_t __iomem *sec = (ccsr_sec_t __iomem *)SEC_ADDR(sec_idx);
 	struct rng4tst __iomem *rng =
 			(struct rng4tst __iomem *)&sec->rng;
 
@@ -509,7 +540,7 @@ static int rng_init(void)
 		 * Also, if a handle was instantiated, do not change
 		 * the TRNG parameters.
 		 */
-		kick_trng(ent_delay);
+		kick_trng(ent_delay, sec_idx);
 		ent_delay += 400;
 		/*
 		 * if instantiate_rng(...) fails, the loop will rerun
@@ -518,7 +549,7 @@ static int rng_init(void)
 		 * interval, leading to a sucessful initialization of
 		 * the RNG.
 		 */
-		ret = instantiate_rng();
+		ret = instantiate_rng(sec_idx);
 	} while ((ret == -1) && (ent_delay < RTSDCTL_ENT_DLY_MAX));
 	if (ret) {
 		printf("RNG: Failed to instantiate RNG\n");
@@ -531,9 +562,9 @@ static int rng_init(void)
 	return ret;
 }
 
-int sec_init(void)
+int sec_init_idx(uint8_t sec_idx)
 {
-	ccsr_sec_t *sec = (void *)CONFIG_SYS_FSL_SEC_ADDR;
+	ccsr_sec_t *sec = (void *)SEC_ADDR(sec_idx);
 	uint32_t mcr = sec_in32(&sec->mcfgr);
 	int ret = 0;
 
@@ -543,6 +574,11 @@ int sec_init(void)
 	uint32_t liodn_s;
 #endif
 
+	if (!(sec_idx < CONFIG_SYS_FSL_MAX_NUM_OF_SEC)) {
+		printf("SEC initialization failed\n");
+		return -1;
+	}
+
 	/*
 	 * Modifying CAAM Read/Write Attributes
 	 * For LS2080A
@@ -568,7 +604,7 @@ int sec_init(void)
 	liodn_s = (liodnr & JRSLIODN_MASK) >> JRSLIODN_SHIFT;
 #endif
 
-	ret = jr_init();
+	ret = jr_init(sec_idx);
 	if (ret < 0) {
 		printf("SEC initialization failed\n");
 		return -1;
@@ -582,13 +618,18 @@ int sec_init(void)
 	pamu_enable();
 #endif
 
-	if (get_rng_vid() >= 4) {
-		if (rng_init() < 0) {
-			printf("RNG instantiation failed\n");
+	if (get_rng_vid(sec_idx) >= 4) {
+		if (rng_init(sec_idx) < 0) {
+			printf("SEC%u: RNG instantiation failed\n", sec_idx);
 			return -1;
 		}
-		printf("SEC: RNG instantiated\n");
+		printf("SEC%u: RNG instantiated\n", sec_idx);
 	}
 
 	return ret;
 }
+
+int sec_init(void)
+{
+	return sec_init_idx(0);
+}
diff --git a/drivers/crypto/fsl/jr.h b/drivers/crypto/fsl/jr.h
index 1642dbbf4c..d897e572d6 100644
--- a/drivers/crypto/fsl/jr.h
+++ b/drivers/crypto/fsl/jr.h
@@ -90,6 +90,9 @@ struct jobring {
 	/* This ring can be on the stack */
 	struct jr_info info[JR_SIZE];
 	struct op_ring *output_ring;
+	/* Offset in CCSR to the SEC engine to which this JR belongs */
+	uint32_t sec_offset;
+
 };
 
 struct result {
diff --git a/drivers/ddr/fsl/fsl_ddr_gen4.c b/drivers/ddr/fsl/fsl_ddr_gen4.c
index 608810d4e2..5039f5de0a 100644
--- a/drivers/ddr/fsl/fsl_ddr_gen4.c
+++ b/drivers/ddr/fsl/fsl_ddr_gen4.c
@@ -56,7 +56,8 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
 	u32 vref_seq2[3] = {0xc0, 0xf0, 0x70};	/* for range 2 */
 	u32 *vref_seq = vref_seq1;
 #endif
-#ifdef CONFIG_SYS_FSL_ERRATUM_A009942
+#if defined(CONFIG_SYS_FSL_ERRATUM_A009942) | \
+	defined(CONFIG_SYS_FSL_ERRATUM_A010165)
 	ulong ddr_freq;
 	u32 tmp;
 #endif
@@ -240,8 +241,10 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
 		/* Disable DRAM VRef training */
 		ddr_out32(&ddr->ddr_cdr2,
 			  regs->ddr_cdr2 & ~DDR_CDR2_VREF_TRAIN_EN);
-		/* Disable deskew */
-		ddr_out32(&ddr->debug[28], 0x400);
+		/* disable transmit bit deskew */
+		temp32 = ddr_in32(&ddr->debug[28]);
+		temp32 |= DDR_TX_BD_DIS;
+		ddr_out32(&ddr->debug[28], temp32);
 		/* Disable D_INIT */
 		ddr_out32(&ddr->sdram_cfg_2,
 			  regs->ddr_sdram_cfg_2 & ~SDRAM_CFG2_D_INIT);
@@ -249,6 +252,13 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
 	}
 #endif
 
+#ifdef CONFIG_SYS_FSL_ERRATUM_A009801
+	temp32 = ddr_in32(&ddr->debug[25]);
+	temp32 &= ~DDR_CAS_TO_PRE_SUB_MASK;
+	temp32 |= 9 << DDR_CAS_TO_PRE_SUB_SHIFT;
+	ddr_out32(&ddr->debug[25], temp32);
+#endif
+
 #ifdef CONFIG_SYS_FSL_ERRATUM_A009942
 	ddr_freq = get_ddr_freq(ctrl_num) / 1000000;
 	tmp = ddr_in32(&ddr->debug[28]);
@@ -262,6 +272,13 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
 		ddr_out32(&ddr->debug[28], tmp | 0x0060007b);
 #endif
 
+#ifdef CONFIG_SYS_FSL_ERRATUM_A010165
+	ddr_freq = get_ddr_freq(ctrl_num) / 1000000;
+	if ((ddr_freq > 1900) && (ddr_freq < 2300)) {
+		tmp = ddr_in32(&ddr->debug[28]);
+		ddr_out32(&ddr->debug[28], tmp | 0x000a0000);
+	}
+#endif
 	/*
 	 * For RDIMMs, JEDEC spec requires clocks to be stable before reset is
 	 * deasserted. Clocks start when any chip select is enabled and clock
@@ -358,7 +375,9 @@ step2:
 			debug("MR6 = 0x%08x\n", temp32);
 		}
 		ddr_out32(&ddr->sdram_md_cntl, 0);
-		ddr_out32(&ddr->debug[28], 0);		/* Enable deskew */
+		temp32 = ddr_in32(&ddr->debug[28]);
+		temp32 &= ~DDR_TX_BD_DIS; /* Enable deskew */
+		ddr_out32(&ddr->debug[28], temp32);
 		ddr_out32(&ddr->debug[1], 0x400);	/* restart deskew */
 		/* wait for idle */
 		timeout = 40;
diff --git a/drivers/mtd/spi/sf_internal.h b/drivers/mtd/spi/sf_internal.h
index 007a5a085c..da2bb7b5d2 100644
--- a/drivers/mtd/spi/sf_internal.h
+++ b/drivers/mtd/spi/sf_internal.h
@@ -127,6 +127,11 @@ int sst_write_bp(struct spi_flash *flash, u32 offset, size_t len,
 		const void *buf);
 #endif
 
+#ifdef CONFIG_SPI_FLASH_SPANSION
+/* Used for Spansion S25FS-S family flash only. */
+#define CMD_SPANSION_RDAR	0x65 /* Read any device register */
+#define CMD_SPANSION_WRAR	0x71 /* Write any device register */
+#endif
 /**
  * struct spi_flash_params - SPI/QSPI flash device params structure
  *
diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c
index 5451725689..fa0e79966c 100644
--- a/drivers/mtd/spi/spi_flash.c
+++ b/drivers/mtd/spi/spi_flash.c
@@ -971,6 +971,43 @@ int spi_flash_decode_fdt(const void *blob, struct spi_flash *flash)
 }
 #endif /* CONFIG_IS_ENABLED(OF_CONTROL) */
 
+#ifdef CONFIG_SPI_FLASH_SPANSION
+static int spansion_s25fss_disable_4KB_erase(struct spi_slave *spi)
+{
+	u8 cmd[4];
+	u32 offset = 0x800004; /* CR3V register offset */
+	u8 cr3v;
+	int ret;
+
+	cmd[0] = CMD_SPANSION_RDAR;
+	cmd[1] = offset >> 16;
+	cmd[2] = offset >> 8;
+	cmd[3] = offset >> 0;
+
+	ret = spi_flash_cmd_read(spi, cmd, 4, &cr3v, 1);
+	if (ret)
+		return -EIO;
+	/* CR3V bit3: 4-KB Erase */
+	if (cr3v & 0x8)
+		return 0;
+
+	cmd[0] = CMD_SPANSION_WRAR;
+	cr3v |= 0x8;
+	ret = spi_flash_cmd_write(spi, cmd, 4, &cr3v, 1);
+	if (ret)
+		return -EIO;
+
+	cmd[0] = CMD_SPANSION_RDAR;
+	ret = spi_flash_cmd_read(spi, cmd, 4, &cr3v, 1);
+	if (ret)
+		return -EIO;
+	if (!(cr3v & 0x8))
+		return -EFAULT;
+
+	return 0;
+}
+#endif
+
 int spi_flash_scan(struct spi_flash *flash)
 {
 	struct spi_slave *spi = flash->spi;
@@ -1021,6 +1058,41 @@ int spi_flash_scan(struct spi_flash *flash)
 		return -EPROTONOSUPPORT;
 	}
 
+#ifdef CONFIG_SPI_FLASH_SPANSION
+	/*
+	 * The S25FS-S family physical sectors may be configured as a
+	 * hybrid combination of eight 4-kB parameter sectors
+	 * at the top or bottom of the address space with all
+	 * but one of the remaining sectors being uniform size.
+	 * The Parameter Sector Erase commands (20h or 21h) must
+	 * be used to erase the 4-kB parameter sectors individually.
+	 * The Sector (uniform sector) Erase commands (D8h or DCh)
+	 * must be used to erase any of the remaining
+	 * sectors, including the portion of highest or lowest address
+	 * sector that is not overlaid by the parameter sectors.
+	 * The uniform sector erase command has no effect on parameter sectors.
+	 */
+	if (jedec == 0x0219 && (ext_jedec & 0xff00) == 0x4d00) {
+		int ret;
+		u8 id[6];
+
+		/* Read the ID codes again, 6 bytes */
+		ret = spi_flash_cmd(flash->spi, CMD_READ_ID, id, sizeof(id));
+		if (ret)
+			return -EIO;
+
+		ret = memcmp(id, idcode, 5);
+		if (ret)
+			return -EIO;
+
+		/* 0x81: S25FS-S family 0x80: S25FL-S family */
+		if (id[5] == 0x81) {
+			ret = spansion_s25fss_disable_4KB_erase(spi);
+			if (ret)
+				return ret;
+		}
+	}
+#endif
 	/* Flash powers up read-only, so clear BP# bits */
 	if (idcode[0] == SPI_FLASH_CFI_MFR_ATMEL ||
 	    idcode[0] == SPI_FLASH_CFI_MFR_MACRONIX ||
diff --git a/drivers/spi/fsl_qspi.c b/drivers/spi/fsl_qspi.c
index cb8d929d07..75cbab2676 100644
--- a/drivers/spi/fsl_qspi.c
+++ b/drivers/spi/fsl_qspi.c
@@ -44,6 +44,8 @@ DECLARE_GLOBAL_DATA_PTR;
 #define SEQID_RDEAR		11
 #define SEQID_WREAR		12
 #endif
+#define SEQID_WRAR		13
+#define SEQID_RDAR		14
 
 /* QSPI CMD */
 #define QSPI_CMD_PP		0x02	/* Page program (up to 256 bytes) */
@@ -63,6 +65,10 @@ DECLARE_GLOBAL_DATA_PTR;
 #define	QSPI_CMD_BRRD		0x16	/* Bank register read */
 #define	QSPI_CMD_BRWR		0x17	/* Bank register write */
 
+/* Used for Spansion S25FS-S family flash only. */
+#define QSPI_CMD_RDAR		0x65	/* Read any device register */
+#define QSPI_CMD_WRAR		0x71	/* Write any device register */
+
 /* 4-byte address QSPI CMD - used on Spansion and some Macronix flashes */
 #define QSPI_CMD_FAST_READ_4B	0x0c    /* Read data bytes (high frequency) */
 #define QSPI_CMD_PP_4B		0x12    /* Page program (up to 256 bytes) */
@@ -92,9 +98,9 @@ DECLARE_GLOBAL_DATA_PTR;
 struct fsl_qspi_platdata {
 	u32 flags;
 	u32 speed_hz;
-	u32 reg_base;
-	u32 amba_base;
-	u32 amba_total_size;
+	fdt_addr_t reg_base;
+	fdt_addr_t amba_base;
+	fdt_size_t amba_total_size;
 	u32 flash_num;
 	u32 num_chipselect;
 };
@@ -317,6 +323,33 @@ static void qspi_set_lut(struct fsl_qspi_priv *priv)
 		     PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(1) |
 		     PAD1(LUT_PAD1) | INSTR1(LUT_WRITE));
 #endif
+
+	/*
+	 * Read any device register.
+	 * Used for Spansion S25FS-S family flash only.
+	 */
+	lut_base = SEQID_RDAR * 4;
+	qspi_write32(priv->flags, &regs->lut[lut_base],
+		     OPRND0(QSPI_CMD_RDAR) | PAD0(LUT_PAD1) |
+		     INSTR0(LUT_CMD) | OPRND1(ADDR24BIT) |
+		     PAD1(LUT_PAD1) | INSTR1(LUT_ADDR));
+	qspi_write32(priv->flags, &regs->lut[lut_base + 1],
+		     OPRND0(8) | PAD0(LUT_PAD1) | INSTR0(LUT_DUMMY) |
+		     OPRND1(1) | PAD1(LUT_PAD1) |
+		     INSTR1(LUT_READ));
+
+	/*
+	 * Write any device register.
+	 * Used for Spansion S25FS-S family flash only.
+	 */
+	lut_base = SEQID_WRAR * 4;
+	qspi_write32(priv->flags, &regs->lut[lut_base],
+		     OPRND0(QSPI_CMD_WRAR) | PAD0(LUT_PAD1) |
+		     INSTR0(LUT_CMD) | OPRND1(ADDR24BIT) |
+		     PAD1(LUT_PAD1) | INSTR1(LUT_ADDR));
+	qspi_write32(priv->flags, &regs->lut[lut_base + 1],
+		     OPRND0(1) | PAD0(LUT_PAD1) | INSTR0(LUT_WRITE));
+
 	/* Lock the LUT */
 	qspi_write32(priv->flags, &regs->lutkey, LUT_KEY_VALUE);
 	qspi_write32(priv->flags, &regs->lckcr, QSPI_LCKCR_LOCK);
@@ -510,7 +543,6 @@ static void qspi_op_rdid(struct fsl_qspi_priv *priv, u32 *rxbuf, u32 len)
 	qspi_write32(priv->flags, &regs->mcr, mcr_reg);
 }
 
-#ifndef CONFIG_SYS_FSL_QSPI_AHB
 /* If not use AHB read, read data from ip interface */
 static void qspi_op_read(struct fsl_qspi_priv *priv, u32 *rxbuf, u32 len)
 {
@@ -518,6 +550,12 @@ static void qspi_op_read(struct fsl_qspi_priv *priv, u32 *rxbuf, u32 len)
 	u32 mcr_reg, data;
 	int i, size;
 	u32 to_or_from;
+	u32 seqid;
+
+	if (priv->cur_seqid == QSPI_CMD_RDAR)
+		seqid = SEQID_RDAR;
+	else
+		seqid = SEQID_FAST_READ;
 
 	mcr_reg = qspi_read32(priv->flags, &regs->mcr);
 	qspi_write32(priv->flags, &regs->mcr,
@@ -536,7 +574,7 @@ static void qspi_op_read(struct fsl_qspi_priv *priv, u32 *rxbuf, u32 len)
 			RX_BUFFER_SIZE : len;
 
 		qspi_write32(priv->flags, &regs->ipcr,
-			     (SEQID_FAST_READ << QSPI_IPCR_SEQID_SHIFT) |
+			     (seqid << QSPI_IPCR_SEQID_SHIFT) |
 			     size);
 		while (qspi_read32(priv->flags, &regs->sr) & QSPI_SR_BUSY_MASK)
 			;
@@ -548,7 +586,10 @@ static void qspi_op_read(struct fsl_qspi_priv *priv, u32 *rxbuf, u32 len)
 		while ((RX_BUFFER_SIZE >= size) && (size > 0)) {
 			data = qspi_read32(priv->flags, &regs->rbdr[i]);
 			data = qspi_endian_xchg(data);
-			memcpy(rxbuf, &data, 4);
+			if (size < 4)
+				memcpy(rxbuf, &data, size);
+			else
+				memcpy(rxbuf, &data, 4);
 			rxbuf++;
 			size -= 4;
 			i++;
@@ -560,7 +601,6 @@ static void qspi_op_read(struct fsl_qspi_priv *priv, u32 *rxbuf, u32 len)
 
 	qspi_write32(priv->flags, &regs->mcr, mcr_reg);
 }
-#endif
 
 static void qspi_op_write(struct fsl_qspi_priv *priv, u8 *txbuf, u32 len)
 {
@@ -601,6 +641,8 @@ static void qspi_op_write(struct fsl_qspi_priv *priv, u8 *txbuf, u32 len)
 
 	/* Default is page programming */
 	seqid = SEQID_PP;
+	if (priv->cur_seqid == QSPI_CMD_WRAR)
+		seqid = SEQID_WRAR;
 #ifdef CONFIG_SPI_FLASH_BAR
 	if (priv->cur_seqid == QSPI_CMD_BRWR)
 		seqid = SEQID_BRWR;
@@ -725,13 +767,15 @@ int qspi_xfer(struct fsl_qspi_priv *priv, unsigned int bitlen,
 			return 0;
 		}
 
-		if (priv->cur_seqid == QSPI_CMD_FAST_READ) {
+		if (priv->cur_seqid == QSPI_CMD_FAST_READ ||
+		    priv->cur_seqid == QSPI_CMD_RDAR) {
 			priv->sf_addr = swab32(txbuf) & OFFSET_BITS_MASK;
 		} else if ((priv->cur_seqid == QSPI_CMD_SE) ||
 			   (priv->cur_seqid == QSPI_CMD_BE_4K)) {
 			priv->sf_addr = swab32(txbuf) & OFFSET_BITS_MASK;
 			qspi_op_erase(priv);
-		} else if (priv->cur_seqid == QSPI_CMD_PP) {
+		} else if (priv->cur_seqid == QSPI_CMD_PP ||
+			   priv->cur_seqid == QSPI_CMD_WRAR) {
 			wr_sfaddr = swab32(txbuf) & OFFSET_BITS_MASK;
 		} else if ((priv->cur_seqid == QSPI_CMD_BRWR) ||
 			 (priv->cur_seqid == QSPI_CMD_WREAR)) {
@@ -748,6 +792,8 @@ int qspi_xfer(struct fsl_qspi_priv *priv, unsigned int bitlen,
 #else
 			qspi_op_read(priv, din, bytes);
 #endif
+		} else if (priv->cur_seqid == QSPI_CMD_RDAR) {
+			qspi_op_read(priv, din, bytes);
 		} else if (priv->cur_seqid == QSPI_CMD_RDID)
 			qspi_op_rdid(priv, din, bytes);
 		else if (priv->cur_seqid == QSPI_CMD_RDSR)
@@ -927,10 +973,11 @@ static int fsl_qspi_child_pre_probe(struct udevice *dev)
 
 static int fsl_qspi_probe(struct udevice *bus)
 {
-	u32 total_size;
+	u32 amba_size_per_chip;
 	struct fsl_qspi_platdata *plat = dev_get_platdata(bus);
 	struct fsl_qspi_priv *priv = dev_get_priv(bus);
 	struct dm_spi_bus *dm_spi_bus;
+	int i;
 
 	dm_spi_bus = bus->uclass_priv;
 
@@ -940,8 +987,13 @@ static int fsl_qspi_probe(struct udevice *bus)
 	priv->flags = plat->flags;
 
 	priv->speed_hz = plat->speed_hz;
-	priv->amba_base[0] = plat->amba_base;
-	priv->amba_total_size = plat->amba_total_size;
+	/*
+	 * QSPI SFADR width is 32bits, the max dest addr is 4GB-1.
+	 * AMBA memory zone should be located on the 0~4GB space
+	 * even on a 64bits cpu.
+	 */
+	priv->amba_base[0] = (u32)plat->amba_base;
+	priv->amba_total_size = (u32)plat->amba_total_size;
 	priv->flash_num = plat->flash_num;
 	priv->num_chipselect = plat->num_chipselect;
 
@@ -951,7 +1003,22 @@ static int fsl_qspi_probe(struct udevice *bus)
 	qspi_cfg_smpr(priv, ~(QSPI_SMPR_FSDLY_MASK | QSPI_SMPR_DDRSMP_MASK |
 		QSPI_SMPR_FSPHS_MASK | QSPI_SMPR_HSENA_MASK), 0);
 
-	total_size = FSL_QSPI_FLASH_SIZE * FSL_QSPI_FLASH_NUM;
+	/*
+	 * Assign AMBA memory zone for every chipselect
+	 * QuadSPI has two channels, every channel has two chipselects.
+	 * If the property 'num-cs' in dts is 2, the AMBA memory will be divided
+	 * into two parts and assign to every channel. This indicate that every
+	 * channel only has one valid chipselect.
+	 * If the property 'num-cs' in dts is 4, the AMBA memory will be divided
+	 * into four parts and assign to every chipselect.
+	 * Every channel will has two valid chipselects.
+	 */
+	amba_size_per_chip = priv->amba_total_size >>
+			     (priv->num_chipselect >> 1);
+	for (i = 1 ; i < priv->num_chipselect ; i++)
+		priv->amba_base[i] =
+			amba_size_per_chip + priv->amba_base[i - 1];
+
 	/*
 	 * Any read access to non-implemented addresses will provide
 	 * undefined results.
@@ -962,14 +1029,30 @@ static int fsl_qspi_probe(struct udevice *bus)
 	 * setting the size of these devices to 0.  This would ensure
 	 * that the complete memory map is assigned to only one flash device.
 	 */
-	qspi_write32(priv->flags, &priv->regs->sfa1ad,
-		     FSL_QSPI_FLASH_SIZE | priv->amba_base[0]);
-	qspi_write32(priv->flags, &priv->regs->sfa2ad,
-		     FSL_QSPI_FLASH_SIZE | priv->amba_base[0]);
-	qspi_write32(priv->flags, &priv->regs->sfb1ad,
-		     total_size | priv->amba_base[0]);
-	qspi_write32(priv->flags, &priv->regs->sfb2ad,
-		     total_size | priv->amba_base[0]);
+	qspi_write32(priv->flags, &priv->regs->sfa1ad, priv->amba_base[1]);
+	switch (priv->num_chipselect) {
+	case 2:
+		qspi_write32(priv->flags, &priv->regs->sfa2ad,
+			     priv->amba_base[1]);
+		qspi_write32(priv->flags, &priv->regs->sfb1ad,
+			     priv->amba_base[1] + amba_size_per_chip);
+		qspi_write32(priv->flags, &priv->regs->sfb2ad,
+			     priv->amba_base[1] + amba_size_per_chip);
+		break;
+	case 4:
+		qspi_write32(priv->flags, &priv->regs->sfa2ad,
+			     priv->amba_base[2]);
+		qspi_write32(priv->flags, &priv->regs->sfb1ad,
+			     priv->amba_base[3]);
+		qspi_write32(priv->flags, &priv->regs->sfb2ad,
+			     priv->amba_base[3] + amba_size_per_chip);
+		break;
+	default:
+		debug("Error: Unsupported chipselect number %u!\n",
+		      priv->num_chipselect);
+		qspi_module_disable(priv, 1);
+		return -EINVAL;
+	}
 
 	qspi_set_lut(priv);
 
@@ -984,10 +1067,7 @@ static int fsl_qspi_probe(struct udevice *bus)
 
 static int fsl_qspi_ofdata_to_platdata(struct udevice *bus)
 {
-	struct reg_data {
-		u32 addr;
-		u32 size;
-	} regs_data[2];
+	struct fdt_resource res_regs, res_mem;
 	struct fsl_qspi_platdata *plat = bus->platdata;
 	const void *blob = gd->fdt_blob;
 	int node = bus->of_offset;
@@ -996,10 +1076,16 @@ static int fsl_qspi_ofdata_to_platdata(struct udevice *bus)
 	if (fdtdec_get_bool(blob, node, "big-endian"))
 		plat->flags |= QSPI_FLAG_REGMAP_ENDIAN_BIG;
 
-	ret = fdtdec_get_int_array(blob, node, "reg", (u32 *)regs_data,
-				   sizeof(regs_data)/sizeof(u32));
+	ret = fdt_get_named_resource(blob, node, "reg", "reg-names",
+				     "QuadSPI", &res_regs);
+	if (ret) {
+		debug("Error: can't get regs base addresses(ret = %d)!\n", ret);
+		return -ENOMEM;
+	}
+	ret = fdt_get_named_resource(blob, node, "reg", "reg-names",
+				     "QuadSPI-memory", &res_mem);
 	if (ret) {
-		debug("Error: can't get base addresses (ret = %d)!\n", ret);
+		debug("Error: can't get AMBA base addresses(ret = %d)!\n", ret);
 		return -ENOMEM;
 	}
 
@@ -1017,16 +1103,16 @@ static int fsl_qspi_ofdata_to_platdata(struct udevice *bus)
 	plat->num_chipselect = fdtdec_get_int(blob, node, "num-cs",
 					      FSL_QSPI_MAX_CHIPSELECT_NUM);
 
-	plat->reg_base = regs_data[0].addr;
-	plat->amba_base = regs_data[1].addr;
-	plat->amba_total_size = regs_data[1].size;
+	plat->reg_base = res_regs.start;
+	plat->amba_base = res_mem.start;
+	plat->amba_total_size = res_mem.end - res_mem.start + 1;
 	plat->flash_num = flash_num;
 
-	debug("%s: regs=<0x%x> <0x%x, 0x%x>, max-frequency=%d, endianess=%s\n",
+	debug("%s: regs=<0x%llx> <0x%llx, 0x%llx>, max-frequency=%d, endianess=%s\n",
 	      __func__,
-	      plat->reg_base,
-	      plat->amba_base,
-	      plat->amba_total_size,
+	      (u64)plat->reg_base,
+	      (u64)plat->amba_base,
+	      (u64)plat->amba_total_size,
 	      plat->speed_hz,
 	      plat->flags & QSPI_FLAG_REGMAP_ENDIAN_BIG ? "be" : "le"
 	      );
@@ -1055,8 +1141,7 @@ static int fsl_qspi_claim_bus(struct udevice *dev)
 	bus = dev->parent;
 	priv = dev_get_priv(bus);
 
-	priv->cur_amba_base =
-		priv->amba_base[0] + FSL_QSPI_FLASH_SIZE * slave_plat->cs;
+	priv->cur_amba_base = priv->amba_base[slave_plat->cs];
 
 	qspi_module_disable(priv, 0);
 
diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h
index 54968b5231..a7d49ed6e8 100644
--- a/include/configs/ls1043a_common.h
+++ b/include/configs/ls1043a_common.h
@@ -257,8 +257,13 @@
 
 #define CONFIG_BOOTARGS			"console=ttyS0,115200 root=/dev/ram0 " \
 					"earlycon=uart8250,mmio,0x21c0500"
+#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
+#define CONFIG_BOOTCOMMAND		"sf probe && sf read $kernel_load "    \
+					"e0000 f00000 && bootm $kernel_load"
+#else
 #define CONFIG_BOOTCOMMAND		"cp.b $kernel_start $kernel_load "     \
 					"$kernel_size && bootm $kernel_load"
+#endif
 #define CONFIG_BOOTDELAY		10
 
 /* Monitor Command Prompt */
diff --git a/include/configs/ls1043ardb.h b/include/configs/ls1043ardb.h
index 6d35be2e47..aca8d95c15 100644
--- a/include/configs/ls1043ardb.h
+++ b/include/configs/ls1043ardb.h
@@ -253,6 +253,7 @@
 #define CONFIG_PHY_VITESSE
 #define CONFIG_PHY_REALTEK
 #define CONFIG_PHY_AQUANTIA
+#define AQR105_IRQ_MASK			0x40000000
 
 #define RGMII_PHY1_ADDR			0x1
 #define RGMII_PHY2_ADDR			0x2
@@ -285,6 +286,27 @@
 #define CONFIG_USB_STORAGE
 #endif
 
+/* SATA */
+#define CONFIG_LIBATA
+#define CONFIG_SCSI_AHCI
+#define CONFIG_CMD_SCSI
+#ifndef CONFIG_CMD_FAT
+#define CONFIG_CMD_FAT
+#endif
+#ifndef CONFIG_CMD_EXT2
+#define CONFIG_CMD_EXT2
+#endif
+#define CONFIG_DOS_PARTITION
+#define CONFIG_BOARD_LATE_INIT
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID		2
+#define CONFIG_SYS_SCSI_MAX_LUN			2
+#define CONFIG_SYS_SCSI_MAX_DEVICE		(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
+						CONFIG_SYS_SCSI_MAX_LUN)
+#define SCSI_VEND_ID 0x1b4b
+#define SCSI_DEV_ID  0x9170
+#define CONFIG_SCSI_DEV_LIST {SCSI_VEND_ID, SCSI_DEV_ID}
+#define CONFIG_PCI
+
 #include <asm/fsl_secure_boot.h>
 
 #endif /* __LS1043ARDB_H__ */
diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h
index a3aad1b99d..c78aeb57ed 100644
--- a/include/configs/ls2080a_common.h
+++ b/include/configs/ls2080a_common.h
@@ -26,6 +26,8 @@
 /* We need architecture specific misc initializations */
 #define CONFIG_ARCH_MISC_INIT
 
+#define CONFIG_FSL_CAAM			/* Enable SEC/CAAM */
+
 /* Link Definitions */
 #ifdef CONFIG_SPL
 #define CONFIG_SYS_TEXT_BASE		0x80400000
@@ -292,4 +294,10 @@ unsigned long long get_qixis_addr(void);
 
 #define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
 
+/* Hash command with SHA acceleration supported in hardware */
+#ifdef CONFIG_FSL_CAAM
+#define CONFIG_CMD_HASH
+#define CONFIG_SHA_HW_ACCEL
+#endif
+
 #endif /* __LS2_COMMON_H */
diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h
index f8c9e51ae7..4b27114863 100644
--- a/include/configs/ls2080aqds.h
+++ b/include/configs/ls2080aqds.h
@@ -374,7 +374,7 @@ unsigned long get_board_ddr_clk(void);
 #define XQSGMII_CARD_PHY4_PORT3_ADDR 0xf
 
 #define CONFIG_MII		/* MII PHY management */
-#define CONFIG_ETHPRIME		"DPNI1"
+#define CONFIG_ETHPRIME		"DPMAC1@xgmii"
 #define CONFIG_PHY_GIGE		/* Include GbE speed/duplex detection */
 
 #endif
diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h
index 4577919ca1..3baca643d5 100644
--- a/include/configs/ls2080ardb.h
+++ b/include/configs/ls2080ardb.h
@@ -366,7 +366,7 @@ unsigned long get_board_sys_clk(void);
 #define AQR405_IRQ_MASK		0x36
 
 #define CONFIG_MII
-#define CONFIG_ETHPRIME		"DPNI1"
+#define CONFIG_ETHPRIME		"DPMAC1@xgmii"
 #define CONFIG_PHY_GIGE
 #define CONFIG_PHY_AQUANTIA
 #endif
diff --git a/include/fsl_ddr_sdram.h b/include/fsl_ddr_sdram.h
index cf316a4665..486e47e508 100644
--- a/include/fsl_ddr_sdram.h
+++ b/include/fsl_ddr_sdram.h
@@ -146,6 +146,10 @@ typedef struct ddr4_spd_eeprom_s generic_spd_eeprom_t;
 #define WR_DATA_DELAY_SHIFT	10
 #endif
 
+/* DDR_EOR register */
+#define DDR_EOR_RD_REOD_DIS	0x07000000
+#define DDR_EOR_WD_REOD_DIS	0x00100000
+
 /* DDR_MD_CNTL */
 #define MD_CNTL_MD_EN		0x80000000
 #define MD_CNTL_CS_SEL_CS0	0x00000000
@@ -185,6 +189,13 @@ typedef struct ddr4_spd_eeprom_s generic_spd_eeprom_t;
 #define DDR_MR5_CA_PARITY_LAT_4_CLK	0x1 /* for DDR4-1600/1866/2133 */
 #define DDR_MR5_CA_PARITY_LAT_5_CLK	0x2 /* for DDR4-2400 */
 
+/* DEBUG_26 register */
+#define DDR_CAS_TO_PRE_SUB_MASK  0x0000f000 /* CAS to preamble subtract value */
+#define DDR_CAS_TO_PRE_SUB_SHIFT 12
+
+/* DEBUG_29 register */
+#define DDR_TX_BD_DIS	(1 << 10) /* Transmit Bit Deskew Disable */
+
 
 #if (defined(CONFIG_SYS_FSL_DDR_VER) && \
 	(CONFIG_SYS_FSL_DDR_VER >= FSL_DDR_VER_4_7))
diff --git a/include/fsl_sec.h b/include/fsl_sec.h
index a52110a625..bffabc89b9 100644
--- a/include/fsl_sec.h
+++ b/include/fsl_sec.h
@@ -294,8 +294,6 @@ struct sg_entry {
 
 #endif
 
-int sec_init(void);
-
 /* blob_dek:
  * Encapsulates the src in a secure blob and stores it dst
  * @src: reference to the plaintext
@@ -305,6 +303,10 @@ int sec_init(void);
  */
 int blob_dek(const u8 *src, u8 *dst, u8 len);
 
+#if defined(CONFIG_PPC_C29X)
+int sec_init_idx(uint8_t);
+#endif
+int sec_init(void);
 #endif
 
 #endif /* __FSL_SEC_H */