* Patch by Peter Ryser, 20 Feb 2004:

  Add support for the Xilinx ML300 platform

* Patch by Stephan Linz, 17 Feb 2004:
  Fix watchdog support for NIOS

* Patch by Josh Fryman, 16 Feb 2004:
  Fix byte-swapping for cfi_flash.c for different bus widths

* Patch by Jon Diekema, 14 Jeb 2004:
  Remove duplicate "FPGA Support" notes from the README file

1 files changed, 0 insertions, 54 deletions

diff --git a/README b/README
index 3631f01c8d..b5a287cbf7 100644
--- a/README
+++ b/README
@@ -1159,60 +1159,6 @@ The following options need to be configured:
 
 		CONFIG_FPGA
 
-		Used to specify the types of FPGA devices. For
-		example,
-		#define CONFIG_FPGA  CFG_XILINX_VIRTEX2
-
-		CFG_FPGA_PROG_FEEDBACK
-
-		Enable printing of hash marks during FPGA
-		configuration.
-
-		CFG_FPGA_CHECK_BUSY
-
-		Enable checks on FPGA configuration interface busy
-		status by the configuration function. This option
-		will require a board or device specific function to
-		be written.
-
-		CONFIG_FPGA_DELAY
-
-		If defined, a function that provides delays in the
-		FPGA configuration driver.
-
-		CFG_FPGA_CHECK_CTRLC
-
-		Allow Control-C to interrupt FPGA configuration
-
-		CFG_FPGA_CHECK_ERROR
-
-		Check for configuration errors during FPGA bitfile
-		loading. For example, abort during Virtex II
-		configuration if the INIT_B line goes low (which
-		indicated a CRC error).
-
-		CFG_FPGA_WAIT_INIT
-
-		Maximum time to wait for the INIT_B line to deassert
-		after PROB_B has been deasserted during a Virtex II
-		FPGA configuration sequence. The default time is 500 mS.
-
-		CFG_FPGA_WAIT_BUSY
-
-		Maximum time to wait for BUSY to deassert during
-		Virtex II FPGA configuration. The default is 5 mS.
-
-		CFG_FPGA_WAIT_CONFIG
-
-		Time to wait after FPGA configuration. The default is
-		200 mS.
-
-- FPGA Support: CONFIG_FPGA_COUNT
-
-		Specify the number of FPGA devices to support.
-
-		CONFIG_FPGA
-
 		Used to specify the types of FPGA devices.  For example,
 		#define CONFIG_FPGA  CFG_XILINX_VIRTEX2