diff options
| author | Stefan Roese <sr@denx.de> | 2013-04-04 15:53:14 +0200 |
|---|---|---|
| committer | Stefan Roese <sr@denx.de> | 2013-04-22 10:56:38 +0200 |
| commit | 352ef3f1b613cb711c51ec962d2cc1eafff1bf95 (patch) | |
| tree | 22778d28cc3a90d6c725e7e254b00d7c0e4a2b8a /README | |
| parent | d10f68ae47b67acab8b110b5c605dde4197a1820 (diff) | |
flash: Add optional verify-after-write feature
Sometimes it might make sense to verify the written data to NOR flash.
This patch adds this feature. To enable this verify-after-write, you
need to define CONFIG_FLASH_VERIFY in your board config header.
Please note that this option is useless in nearly all cases,
since such flash programming errors usually are detected earlier
while unprotecting/erasing/programming. Please only enable
this option if you really know what you are doing.
Signed-off-by: Stefan Roese <sr@denx.de>
Diffstat (limited to 'README')
| -rw-r--r-- | README | 9 |
1 files changed, 9 insertions, 0 deletions
@@ -3248,6 +3248,15 @@ Configuration Settings: digits and dots. Recommended value: 45 (9..1) for 80 column displays, 15 (3..1) for 40 column displays. +- CONFIG_FLASH_VERIFY + If defined, the content of the flash (destination) is compared + against the source after the write operation. An error message + will be printed when the contents are not identical. + Please note that this option is useless in nearly all cases, + since such flash programming errors usually are detected earlier + while unprotecting/erasing/programming. Please only enable + this option if you really know what you are doing. + - CONFIG_SYS_RX_ETH_BUFFER: Defines the number of Ethernet receive buffers. On some Ethernet controllers it is recommended to set this value |