Convert CONFIG_SHOW_BOOT_PROGRESS to Kconfig

This converts the following to Kconfig:
   CONFIG_SHOW_BOOT_PROGRESS

Signed-off-by: Simon Glass <sjg@chromium.org>

1 files changed, 0 insertions, 165 deletions

diff --git a/README b/README
index d2f466e6f6..b08ad8904d 100644
--- a/README
+++ b/README
@@ -2134,171 +2134,6 @@ The following options need to be configured:
 		A better solution is to properly configure the firewall,
 		but sometimes that is not allowed.
 
-- Show boot progress:
-		CONFIG_SHOW_BOOT_PROGRESS
-
-		Defining this option allows to add some board-
-		specific code (calling a user-provided function
-		"show_boot_progress(int)") that enables you to show
-		the system's boot progress on some display (for
-		example, some LED's) on your board. At the moment,
-		the following checkpoints are implemented:
-
-
-Legacy uImage format:
-
-  Arg	Where			When
-    1	common/cmd_bootm.c	before attempting to boot an image
-   -1	common/cmd_bootm.c	Image header has bad	 magic number
-    2	common/cmd_bootm.c	Image header has correct magic number
-   -2	common/cmd_bootm.c	Image header has bad	 checksum
-    3	common/cmd_bootm.c	Image header has correct checksum
-   -3	common/cmd_bootm.c	Image data   has bad	 checksum
-    4	common/cmd_bootm.c	Image data   has correct checksum
-   -4	common/cmd_bootm.c	Image is for unsupported architecture
-    5	common/cmd_bootm.c	Architecture check OK
-   -5	common/cmd_bootm.c	Wrong Image Type (not kernel, multi)
-    6	common/cmd_bootm.c	Image Type check OK
-   -6	common/cmd_bootm.c	gunzip uncompression error
-   -7	common/cmd_bootm.c	Unimplemented compression type
-    7	common/cmd_bootm.c	Uncompression OK
-    8	common/cmd_bootm.c	No uncompress/copy overwrite error
-   -9	common/cmd_bootm.c	Unsupported OS (not Linux, BSD, VxWorks, QNX)
-
-    9	common/image.c		Start initial ramdisk verification
-  -10	common/image.c		Ramdisk header has bad	   magic number
-  -11	common/image.c		Ramdisk header has bad	   checksum
-   10	common/image.c		Ramdisk header is OK
-  -12	common/image.c		Ramdisk data   has bad	   checksum
-   11	common/image.c		Ramdisk data   has correct checksum
-   12	common/image.c		Ramdisk verification complete, start loading
-  -13	common/image.c		Wrong Image Type (not PPC Linux ramdisk)
-   13	common/image.c		Start multifile image verification
-   14	common/image.c		No initial ramdisk, no multifile, continue.
-
-   15	arch/<arch>/lib/bootm.c All preparation done, transferring control to OS
-
-  -30	arch/powerpc/lib/board.c	Fatal error, hang the system
-  -31	post/post.c		POST test failed, detected by post_output_backlog()
-  -32	post/post.c		POST test failed, detected by post_run_single()
-
-   34	common/cmd_doc.c	before loading a Image from a DOC device
-  -35	common/cmd_doc.c	Bad usage of "doc" command
-   35	common/cmd_doc.c	correct usage of "doc" command
-  -36	common/cmd_doc.c	No boot device
-   36	common/cmd_doc.c	correct boot device
-  -37	common/cmd_doc.c	Unknown Chip ID on boot device
-   37	common/cmd_doc.c	correct chip ID found, device available
-  -38	common/cmd_doc.c	Read Error on boot device
-   38	common/cmd_doc.c	reading Image header from DOC device OK
-  -39	common/cmd_doc.c	Image header has bad magic number
-   39	common/cmd_doc.c	Image header has correct magic number
-  -40	common/cmd_doc.c	Error reading Image from DOC device
-   40	common/cmd_doc.c	Image header has correct magic number
-   41	common/cmd_ide.c	before loading a Image from a IDE device
-  -42	common/cmd_ide.c	Bad usage of "ide" command
-   42	common/cmd_ide.c	correct usage of "ide" command
-  -43	common/cmd_ide.c	No boot device
-   43	common/cmd_ide.c	boot device found
-  -44	common/cmd_ide.c	Device not available
-   44	common/cmd_ide.c	Device available
-  -45	common/cmd_ide.c	wrong partition selected
-   45	common/cmd_ide.c	partition selected
-  -46	common/cmd_ide.c	Unknown partition table
-   46	common/cmd_ide.c	valid partition table found
-  -47	common/cmd_ide.c	Invalid partition type
-   47	common/cmd_ide.c	correct partition type
-  -48	common/cmd_ide.c	Error reading Image Header on boot device
-   48	common/cmd_ide.c	reading Image Header from IDE device OK
-  -49	common/cmd_ide.c	Image header has bad magic number
-   49	common/cmd_ide.c	Image header has correct magic number
-  -50	common/cmd_ide.c	Image header has bad	 checksum
-   50	common/cmd_ide.c	Image header has correct checksum
-  -51	common/cmd_ide.c	Error reading Image from IDE device
-   51	common/cmd_ide.c	reading Image from IDE device OK
-   52	common/cmd_nand.c	before loading a Image from a NAND device
-  -53	common/cmd_nand.c	Bad usage of "nand" command
-   53	common/cmd_nand.c	correct usage of "nand" command
-  -54	common/cmd_nand.c	No boot device
-   54	common/cmd_nand.c	boot device found
-  -55	common/cmd_nand.c	Unknown Chip ID on boot device
-   55	common/cmd_nand.c	correct chip ID found, device available
-  -56	common/cmd_nand.c	Error reading Image Header on boot device
-   56	common/cmd_nand.c	reading Image Header from NAND device OK
-  -57	common/cmd_nand.c	Image header has bad magic number
-   57	common/cmd_nand.c	Image header has correct magic number
-  -58	common/cmd_nand.c	Error reading Image from NAND device
-   58	common/cmd_nand.c	reading Image from NAND device OK
-
-  -60	common/env_common.c	Environment has a bad CRC, using default
-
-   64	net/eth.c		starting with Ethernet configuration.
-  -64	net/eth.c		no Ethernet found.
-   65	net/eth.c		Ethernet found.
-
-  -80	common/cmd_net.c	usage wrong
-   80	common/cmd_net.c	before calling net_loop()
-  -81	common/cmd_net.c	some error in net_loop() occurred
-   81	common/cmd_net.c	net_loop() back without error
-  -82	common/cmd_net.c	size == 0 (File with size 0 loaded)
-   82	common/cmd_net.c	trying automatic boot
-   83	common/cmd_net.c	running "source" command
-  -83	common/cmd_net.c	some error in automatic boot or "source" command
-   84	common/cmd_net.c	end without errors
-
-FIT uImage format:
-
-  Arg	Where			When
-  100	common/cmd_bootm.c	Kernel FIT Image has correct format
- -100	common/cmd_bootm.c	Kernel FIT Image has incorrect format
-  101	common/cmd_bootm.c	No Kernel subimage unit name, using configuration
- -101	common/cmd_bootm.c	Can't get configuration for kernel subimage
-  102	common/cmd_bootm.c	Kernel unit name specified
- -103	common/cmd_bootm.c	Can't get kernel subimage node offset
-  103	common/cmd_bootm.c	Found configuration node
-  104	common/cmd_bootm.c	Got kernel subimage node offset
- -104	common/cmd_bootm.c	Kernel subimage hash verification failed
-  105	common/cmd_bootm.c	Kernel subimage hash verification OK
- -105	common/cmd_bootm.c	Kernel subimage is for unsupported architecture
-  106	common/cmd_bootm.c	Architecture check OK
- -106	common/cmd_bootm.c	Kernel subimage has wrong type
-  107	common/cmd_bootm.c	Kernel subimage type OK
- -107	common/cmd_bootm.c	Can't get kernel subimage data/size
-  108	common/cmd_bootm.c	Got kernel subimage data/size
- -108	common/cmd_bootm.c	Wrong image type (not legacy, FIT)
- -109	common/cmd_bootm.c	Can't get kernel subimage type
- -110	common/cmd_bootm.c	Can't get kernel subimage comp
- -111	common/cmd_bootm.c	Can't get kernel subimage os
- -112	common/cmd_bootm.c	Can't get kernel subimage load address
- -113	common/cmd_bootm.c	Image uncompress/copy overwrite error
-
-  120	common/image.c		Start initial ramdisk verification
- -120	common/image.c		Ramdisk FIT image has incorrect format
-  121	common/image.c		Ramdisk FIT image has correct format
-  122	common/image.c		No ramdisk subimage unit name, using configuration
- -122	common/image.c		Can't get configuration for ramdisk subimage
-  123	common/image.c		Ramdisk unit name specified
- -124	common/image.c		Can't get ramdisk subimage node offset
-  125	common/image.c		Got ramdisk subimage node offset
- -125	common/image.c		Ramdisk subimage hash verification failed
-  126	common/image.c		Ramdisk subimage hash verification OK
- -126	common/image.c		Ramdisk subimage for unsupported architecture
-  127	common/image.c		Architecture check OK
- -127	common/image.c		Can't get ramdisk subimage data/size
-  128	common/image.c		Got ramdisk subimage data/size
-  129	common/image.c		Can't get ramdisk load address
- -129	common/image.c		Got ramdisk load address
-
- -130	common/cmd_doc.c	Incorrect FIT image format
-  131	common/cmd_doc.c	FIT image format OK
-
- -140	common/cmd_ide.c	Incorrect FIT image format
-  141	common/cmd_ide.c	FIT image format OK
-
- -150	common/cmd_nand.c	Incorrect FIT image format
-  151	common/cmd_nand.c	FIT image format OK
-
-- Standalone program support:
 		CONFIG_STANDALONE_LOAD_ADDR
 
 		This option defines a board specific value for the