diff options
| author | wdenk <wdenk> | 2004-03-13 23:29:43 +0000 |
|---|---|---|
| committer | wdenk <wdenk> | 2004-03-13 23:29:43 +0000 |
| commit | c40b29568232761e33400e58be86b15a167d3422 (patch) | |
| tree | c306e01e8cf535467fb448499304020d251a763a /README | |
| parent | 6629d2f22b4af180dc41defe2396bafcd8fe4093 (diff) | |
* Patch by Rune Torgersen, 27 Feb 2004:
- Added LBA48 support (CONFIG_LBA48 & CFG_64BIT_LBA)
- Added support for 64bit printing in vsprintf (CFG_64BIT_VSPRINTF)
- Added support for 64bit strtoul (CFG_64BIT_STRTOUL)
* Patch by Masami Komiya, 27 Feb 2004:
Fix rarpboot: add autoload by NFS
* Patch by Dan Eisenhut, 26 Feb 2004:
fix flash_write return value in saveenv
* Patch by Stephan Linz, 11 Dec 2003
expand config.mk to avoid trigraph warnings on NIOS
* Rename "BMS2003" board into "HMI10"
Diffstat (limited to 'README')
| -rw-r--r-- | README | 19 |
1 files changed, 19 insertions, 0 deletions
@@ -670,6 +670,18 @@ The following options need to be configured: Set this to enable ATAPI support. +- LBA48 Support + CONFIG_LBA48 + + Set this to enable support for disks larger than 137GB + Also look at CFG_64BIT_LBA ,CFG_64BIT_VSPRINTF and CFG_64BIT_STRTOUL + Whithout these , LBA48 support uses 32bit variables and will 'only' + support disks up to 2.1TB. + + CFG_64BIT_LBA: + When enabled, makes the IDE subsystem use 64bit sector addresses. + Default is 32bit. + - SCSI Support: At the moment only there is only support for the SYM53C8XX SCSI controller; define @@ -1713,6 +1725,13 @@ use the "saveenv" command to store a valid environment. - CFG_FAULT_MII_ADDR: MII address of the PHY to check for the Ethernet link state. +- CFG_64BIT_VSPRINTF: + Makes vsprintf (and all *printf functions) support printing + of 64bit values by using the L quantifier + +- CFG_64BIT_STRTOUL: + Adds simple_strtoull that returns a 64bit value + Low Level (hardware related) configuration options: --------------------------------------------------- |