arm: Move cpu/$CPU to arch/arm/cpu/$CPU

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

1 files changed, 443 insertions, 0 deletions

diff --git a/arch/arm/cpu/arm1136/start.S b/arch/arm/cpu/arm1136/start.S
new file mode 100644
index 0000000000..957f4389b2
--- /dev/null
+++ b/arch/arm/cpu/arm1136/start.S
@@ -0,0 +1,443 @@
+/*
+ *  armboot - Startup Code for OMP2420/ARM1136 CPU-core
+ *
+ *  Copyright (c) 2004	Texas Instruments <r-woodruff2@ti.com>
+ *
+ *  Copyright (c) 2001	Marius Gröger <mag@sysgo.de>
+ *  Copyright (c) 2002	Alex Züpke <azu@sysgo.de>
+ *  Copyright (c) 2002	Gary Jennejohn <garyj@denx.de>
+ *  Copyright (c) 2003	Richard Woodruff <r-woodruff2@ti.com>
+ *  Copyright (c) 2003	Kshitij <kshitij@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+.globl _start
+_start: b	reset
+#ifdef CONFIG_PRELOADER
+	ldr	pc, _hang
+	ldr	pc, _hang
+	ldr	pc, _hang
+	ldr	pc, _hang
+	ldr	pc, _hang
+	ldr	pc, _hang
+	ldr	pc, _hang
+
+_hang:
+	.word	do_hang
+	.word	0x12345678
+	.word	0x12345678
+	.word	0x12345678
+	.word	0x12345678
+	.word	0x12345678
+	.word	0x12345678
+	.word	0x12345678	/* now 16*4=64 */
+#else
+	ldr	pc, _undefined_instruction
+	ldr	pc, _software_interrupt
+	ldr	pc, _prefetch_abort
+	ldr	pc, _data_abort
+	ldr	pc, _not_used
+	ldr	pc, _irq
+	ldr	pc, _fiq
+
+_undefined_instruction: .word undefined_instruction
+_software_interrupt:	.word software_interrupt
+_prefetch_abort:	.word prefetch_abort
+_data_abort:		.word data_abort
+_not_used:		.word not_used
+_irq:			.word irq
+_fiq:			.word fiq
+_pad:			.word 0x12345678 /* now 16*4=64 */
+#endif	/* CONFIG_PRELOADER */
+.global _end_vect
+_end_vect:
+
+	.balignl 16,0xdeadbeef
+/*
+ *************************************************************************
+ *
+ * Startup Code (reset vector)
+ *
+ * do important init only if we don't start from memory!
+ * setup Memory and board specific bits prior to relocation.
+ * relocate armboot to ram
+ * setup stack
+ *
+ *************************************************************************
+ */
+
+_TEXT_BASE:
+	.word	TEXT_BASE
+
+.globl _armboot_start
+_armboot_start:
+	.word _start
+
+/*
+ * These are defined in the board-specific linker script.
+ */
+.globl _bss_start
+_bss_start:
+	.word __bss_start
+
+.globl _bss_end
+_bss_end:
+	.word _end
+
+#ifdef CONFIG_USE_IRQ
+/* IRQ stack memory (calculated at run-time) */
+.globl IRQ_STACK_START
+IRQ_STACK_START:
+	.word	0x0badc0de
+
+/* IRQ stack memory (calculated at run-time) */
+.globl FIQ_STACK_START
+FIQ_STACK_START:
+	.word 0x0badc0de
+#endif
+
+/*
+ * the actual reset code
+ */
+
+reset:
+	/*
+	 * set the cpu to SVC32 mode
+	 */
+	mrs	r0,cpsr
+	bic	r0,r0,#0x1f
+	orr	r0,r0,#0xd3
+	msr	cpsr,r0
+
+#ifdef CONFIG_OMAP2420H4
+       /* Copy vectors to mask ROM indirect addr */
+	adr	r0, _start		/* r0 <- current position of code   */
+		add     r0, r0, #4				/* skip reset vector			*/
+	mov	r2, #64			/* r2 <- size to copy  */
+	add	r2, r0, r2		/* r2 <- source end address	    */
+	mov	r1, #SRAM_OFFSET0	  /* build vect addr */
+	mov	r3, #SRAM_OFFSET1
+	add	r1, r1, r3
+	mov	r3, #SRAM_OFFSET2
+	add	r1, r1, r3
+next:
+	ldmia	r0!, {r3-r10}		/* copy from source address [r0]    */
+	stmia	r1!, {r3-r10}		/* copy to   target address [r1]    */
+	cmp	r0, r2			/* until source end address [r2]    */
+	bne	next			/* loop until equal */
+	bl	cpy_clk_code		/* put dpll adjust code behind vectors */
+#endif
+	/* the mask ROM code should have PLL and others stable */
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+	bl  cpu_init_crit
+#endif
+
+#ifndef CONFIG_SKIP_RELOCATE_UBOOT
+relocate:				/* relocate U-Boot to RAM	    */
+	adr	r0, _start		/* r0 <- current position of code   */
+	ldr	r1, _TEXT_BASE		/* test if we run from flash or RAM */
+	cmp	r0, r1			/* don't reloc during debug	    */
+#ifndef CONFIG_PRELOADER
+	beq	stack_setup
+#endif	/* CONFIG_PRELOADER */
+
+	ldr	r2, _armboot_start
+	ldr	r3, _bss_start
+	sub	r2, r3, r2		/* r2 <- size of armboot	    */
+	add	r2, r0, r2		/* r2 <- source end address	    */
+
+copy_loop:
+	ldmia	r0!, {r3-r10}		/* copy from source address [r0]    */
+	stmia	r1!, {r3-r10}		/* copy to   target address [r1]    */
+	cmp	r0, r2			/* until source end addreee [r2]    */
+	ble	copy_loop
+#endif	/* CONFIG_SKIP_RELOCATE_UBOOT */
+
+	/* Set up the stack						    */
+stack_setup:
+	ldr	r0, _TEXT_BASE		/* upper 128 KiB: relocated uboot   */
+#ifdef CONFIG_PRELOADER
+	sub	sp, r0, #128		/* leave 32 words for abort-stack   */
+#else
+	sub	r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area			    */
+	sub	r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo			    */
+#ifdef CONFIG_USE_IRQ
+	sub	r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
+#endif
+	sub	sp, r0, #12		/* leave 3 words for abort-stack    */
+#endif	/* CONFIG_PRELOADER */
+
+clear_bss:
+	ldr	r0, _bss_start		/* find start of bss segment	    */
+	ldr	r1, _bss_end		/* stop here			    */
+	mov	r2, #0x00000000		/* clear			    */
+
+#ifndef CONFIG_PRELOADER
+clbss_l:str	r2, [r0]		/* clear loop...		    */
+	add	r0, r0, #4
+	cmp	r0, r1
+	bne	clbss_l
+#endif
+
+	ldr	pc, _start_armboot
+
+#ifdef CONFIG_NAND_SPL
+_start_armboot: .word nand_boot
+#else
+#ifdef CONFIG_ONENAND_IPL
+_start_armboot: .word start_oneboot
+#else
+_start_armboot: .word start_armboot
+#endif /* CONFIG_ONENAND_IPL */
+#endif /* CONFIG_NAND_SPL */
+
+/*
+ *************************************************************************
+ *
+ * CPU_init_critical registers
+ *
+ * setup important registers
+ * setup memory timing
+ *
+ *************************************************************************
+ */
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+cpu_init_crit:
+	/*
+	 * flush v4 I/D caches
+	 */
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c7, 0	/* flush v3/v4 cache */
+	mcr	p15, 0, r0, c8, c7, 0	/* flush v4 TLB */
+
+	/*
+	 * disable MMU stuff and caches
+	 */
+	mrc	p15, 0, r0, c1, c0, 0
+	bic	r0, r0, #0x00002300	@ clear bits 13, 9:8 (--V- --RS)
+	bic	r0, r0, #0x00000087	@ clear bits 7, 2:0 (B--- -CAM)
+	orr	r0, r0, #0x00000002	@ set bit 2 (A) Align
+	orr	r0, r0, #0x00001000	@ set bit 12 (I) I-Cache
+	mcr	p15, 0, r0, c1, c0, 0
+
+	/*
+	 * Jump to board specific initialization... The Mask ROM will have already initialized
+	 * basic memory.  Go here to bump up clock rate and handle wake up conditions.
+	 */
+	mov	ip, lr		/* persevere link reg across call */
+	bl	lowlevel_init	/* go setup pll,mux,memory */
+	mov	lr, ip		/* restore link */
+	mov	pc, lr		/* back to my caller */
+#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
+
+#ifndef CONFIG_PRELOADER
+/*
+ *************************************************************************
+ *
+ * Interrupt handling
+ *
+ *************************************************************************
+ */
+@
+@ IRQ stack frame.
+@
+#define S_FRAME_SIZE	72
+
+#define S_OLD_R0	68
+#define S_PSR		64
+#define S_PC		60
+#define S_LR		56
+#define S_SP		52
+
+#define S_IP		48
+#define S_FP		44
+#define S_R10		40
+#define S_R9		36
+#define S_R8		32
+#define S_R7		28
+#define S_R6		24
+#define S_R5		20
+#define S_R4		16
+#define S_R3		12
+#define S_R2		8
+#define S_R1		4
+#define S_R0		0
+
+#define MODE_SVC 0x13
+#define I_BIT	 0x80
+
+/*
+ * use bad_save_user_regs for abort/prefetch/undef/swi ...
+ * use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling
+ */
+
+	.macro	bad_save_user_regs
+	sub	sp, sp, #S_FRAME_SIZE		@ carve out a frame on current user stack
+	stmia	sp, {r0 - r12}			@ Save user registers (now in svc mode) r0-r12
+
+	ldr	r2, _armboot_start
+	sub	r2, r2, #(CONFIG_SYS_MALLOC_LEN)
+	sub	r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8)	@ set base 2 words into abort stack
+	ldmia	r2, {r2 - r3}			@ get values for "aborted" pc and cpsr (into parm regs)
+	add	r0, sp, #S_FRAME_SIZE		@ grab pointer to old stack
+
+	add	r5, sp, #S_SP
+	mov	r1, lr
+	stmia	r5, {r0 - r3}			@ save sp_SVC, lr_SVC, pc, cpsr
+	mov	r0, sp				@ save current stack into r0 (param register)
+	.endm
+
+	.macro	irq_save_user_regs
+	sub	sp, sp, #S_FRAME_SIZE
+	stmia	sp, {r0 - r12}			@ Calling r0-r12
+	add	r8, sp, #S_PC			@ !!!! R8 NEEDS to be saved !!!! a reserved stack spot would be good.
+	stmdb	r8, {sp, lr}^			@ Calling SP, LR
+	str	lr, [r8, #0]			@ Save calling PC
+	mrs	r6, spsr
+	str	r6, [r8, #4]			@ Save CPSR
+	str	r0, [r8, #8]			@ Save OLD_R0
+	mov	r0, sp
+	.endm
+
+	.macro	irq_restore_user_regs
+	ldmia	sp, {r0 - lr}^			@ Calling r0 - lr
+	mov	r0, r0
+	ldr	lr, [sp, #S_PC]			@ Get PC
+	add	sp, sp, #S_FRAME_SIZE
+	subs	pc, lr, #4			@ return & move spsr_svc into cpsr
+	.endm
+
+	.macro get_bad_stack
+	ldr	r13, _armboot_start		@ setup our mode stack (enter in banked mode)
+	sub	r13, r13, #(CONFIG_SYS_MALLOC_LEN)	@ move past malloc pool
+	sub	r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ move to reserved a couple spots for abort stack
+
+	str	lr, [r13]			@ save caller lr in position 0 of saved stack
+	mrs	lr, spsr			@ get the spsr
+	str	lr, [r13, #4]			@ save spsr in position 1 of saved stack
+
+	mov	r13, #MODE_SVC			@ prepare SVC-Mode
+	@ msr	spsr_c, r13
+	msr	spsr, r13			@ switch modes, make sure moves will execute
+	mov	lr, pc				@ capture return pc
+	movs	pc, lr				@ jump to next instruction & switch modes.
+	.endm
+
+	.macro get_bad_stack_swi
+	sub	r13, r13, #4			@ space on current stack for scratch reg.
+	str	r0, [r13]			@ save R0's value.
+	ldr	r0, _armboot_start		@ get data regions start
+	sub	r0, r0, #(CONFIG_SYS_MALLOC_LEN)	@ move past malloc pool
+	sub	r0, r0, #(CONFIG_SYS_GBL_DATA_SIZE+8)	@ move past gbl and a couple spots for abort stack
+	str	lr, [r0]			@ save caller lr in position 0 of saved stack
+	mrs	r0, spsr			@ get the spsr
+	str	lr, [r0, #4]			@ save spsr in position 1 of saved stack
+	ldr	r0, [r13]			@ restore r0
+	add	r13, r13, #4			@ pop stack entry
+	.endm
+
+	.macro get_irq_stack			@ setup IRQ stack
+	ldr	sp, IRQ_STACK_START
+	.endm
+
+	.macro get_fiq_stack			@ setup FIQ stack
+	ldr	sp, FIQ_STACK_START
+	.endm
+#endif	/* CONFIG_PRELOADER */
+
+/*
+ * exception handlers
+ */
+#ifdef CONFIG_PRELOADER
+	.align	5
+do_hang:
+	ldr	sp, _TEXT_BASE			/* use 32 words about stack */
+	bl	hang				/* hang and never return */
+#else	/* !CONFIG_PRELOADER */
+	.align	5
+undefined_instruction:
+	get_bad_stack
+	bad_save_user_regs
+	bl	do_undefined_instruction
+
+	.align	5
+software_interrupt:
+	get_bad_stack_swi
+	bad_save_user_regs
+	bl	do_software_interrupt
+
+	.align	5
+prefetch_abort:
+	get_bad_stack
+	bad_save_user_regs
+	bl	do_prefetch_abort
+
+	.align	5
+data_abort:
+	get_bad_stack
+	bad_save_user_regs
+	bl	do_data_abort
+
+	.align	5
+not_used:
+	get_bad_stack
+	bad_save_user_regs
+	bl	do_not_used
+
+#ifdef CONFIG_USE_IRQ
+
+	.align	5
+irq:
+	get_irq_stack
+	irq_save_user_regs
+	bl	do_irq
+	irq_restore_user_regs
+
+	.align	5
+fiq:
+	get_fiq_stack
+	/* someone ought to write a more effiction fiq_save_user_regs */
+	irq_save_user_regs
+	bl	do_fiq
+	irq_restore_user_regs
+
+#else
+
+	.align	5
+irq:
+	get_bad_stack
+	bad_save_user_regs
+	bl	do_irq
+
+	.align	5
+fiq:
+	get_bad_stack
+	bad_save_user_regs
+	bl	do_fiq
+
+#endif
+	.align 5
+.global arm1136_cache_flush
+arm1136_cache_flush:
+		mcr	p15, 0, r1, c7, c5, 0	@ invalidate I cache
+		mov	pc, lr			@ back to caller
+#endif	/* CONFIG_PRELOADER */