ARM: tegra: collect SoC sources into mach-tegra

This commit moves files as follows:

 arch/arm/cpu/arm720t/tegra20/*      -> arch/arm/mach-tegra/tegra20/*
 arch/arm/cpu/arm720t/tegra30/*      -> arch/arm/mach-tegra/tegra30/*
 arch/arm/cpu/arm720t/tegra114/*     -> arch/arm/mach-tegra/tegra114/*
 arch/arm/cpu/arm720t/tegra124*      -> arch/arm/mach-tegra/tegra124/*
 arch/arm/cpu/arm720t/tegra-common/* -> arch/arm/mach-tegra/*
 arch/arm/cpu/armv7/tegra20/*        -> arch/arm/mach-tegra/tegra20/*
 arch/arm/cpu/armv7/tegra30/*        -> arch/arm/mach-tegra/tegra30/*
 arch/arm/cpu/armv7/tegra114/*       -> arch/arm/mach-tegra/tegra114/*
 arch/arm/cpu/armv7/tegra124/*       -> arch/arm/mach-tegra/tegra124/*
 arch/arm/cpu/armv7/tegra-common/*   -> arch/arm/mach-tegra/*
 arch/arm/cpu/tegra20-common/*       -> arch/arm/mach-tegra/tegra20/*
 arch/arm/cpu/tegra30-common/*       -> arch/arm/mach-tegra/tegra30/*
 arch/arm/cpu/tegra114-common/*      -> arch/arm/mach-tegra/tegra114/*
 arch/arm/cpu/tegra124-common/*      -> arch/arm/mach-tegra/tegra124/*
 arch/arm/cpu/tegra-common/*         -> arch/arm/mach-tegra/*

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Tested-by: Simon Glass <sjg@chromium.org> [ on nyan-big ]
Cc: Stephen Warren <swarren@nvidia.com>
Cc: Tom Warren <twarren@nvidia.com>

2 files changed, 0 insertions, 331 deletions

diff --git a/arch/arm/cpu/arm720t/tegra114/Makefile b/arch/arm/cpu/arm720t/tegra114/Makefile
deleted file mode 100644
index ea3e55ea62..0000000000
--- a/arch/arm/cpu/arm720t/tegra114/Makefile
+++ /dev/null
@@ -1,21 +0,0 @@
-#
-# Copyright (c) 2010-2013, NVIDIA CORPORATION.  All rights reserved.
-#
-# (C) Copyright 2000-2008
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# This program is free software; you can redistribute it and/or modify it
-# under the terms and conditions of the GNU General Public License,
-# version 2, as published by the Free Software Foundation.
-#
-# This program is distributed in the hope it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
-# more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-#
-
-#obj-y	+= cpu.o t11x.o
-obj-y	+= cpu.o
diff --git a/arch/arm/cpu/arm720t/tegra114/cpu.c b/arch/arm/cpu/arm720t/tegra114/cpu.c
deleted file mode 100644
index 5ed3bb9d9a..0000000000
--- a/arch/arm/cpu/arm720t/tegra114/cpu.c
+++ /dev/null
@@ -1,310 +0,0 @@
-/*
- * Copyright (c) 2010-2014, NVIDIA CORPORATION.  All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/flow.h>
-#include <asm/arch/pinmux.h>
-#include <asm/arch/tegra.h>
-#include <asm/arch-tegra/clk_rst.h>
-#include <asm/arch-tegra/pmc.h>
-#include "../tegra-common/cpu.h"
-
-/* Tegra114-specific CPU init code */
-static void enable_cpu_power_rail(void)
-{
-	struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
-	struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
-	u32 reg;
-
-	debug("enable_cpu_power_rail entry\n");
-
-	/* un-tristate PWR_I2C SCL/SDA, rest of the defaults are correct */
-	pinmux_tristate_disable(PMUX_PINGRP_PWR_I2C_SCL_PZ6);
-	pinmux_tristate_disable(PMUX_PINGRP_PWR_I2C_SDA_PZ7);
-
-	/*
-	 * Set CPUPWRGOOD_TIMER - APB clock is 1/2 of SCLK (102MHz),
-	 * set it for 25ms (102MHz * .025)
-	 */
-	reg = 0x26E8F0;
-	writel(reg, &pmc->pmc_cpupwrgood_timer);
-
-	/* Set polarity to 0 (normal) and enable CPUPWRREQ_OE */
-	clrbits_le32(&pmc->pmc_cntrl, CPUPWRREQ_POL);
-	setbits_le32(&pmc->pmc_cntrl, CPUPWRREQ_OE);
-
-	/*
-	 * Set CLK_RST_CONTROLLER_CPU_SOFTRST_CTRL2_0_CAR2PMC_CPU_ACK_WIDTH
-	 * to 408 to satisfy the requirement of having at least 16 CPU clock
-	 * cycles before clamp removal.
-	 */
-
-	clrbits_le32(&clkrst->crc_cpu_softrst_ctrl2, 0xFFF);
-	setbits_le32(&clkrst->crc_cpu_softrst_ctrl2, 408);
-}
-
-static void enable_cpu_clocks(void)
-{
-	struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
-	u32 reg;
-
-	debug("enable_cpu_clocks entry\n");
-
-	/* Wait for PLL-X to lock */
-	do {
-		reg = readl(&clkrst->crc_pll_simple[SIMPLE_PLLX].pll_base);
-	} while ((reg & PLL_LOCK_MASK) == 0);
-
-	/* Wait until all clocks are stable */
-	udelay(PLL_STABILIZATION_DELAY);
-
-	writel(CCLK_BURST_POLICY, &clkrst->crc_cclk_brst_pol);
-	writel(SUPER_CCLK_DIVIDER, &clkrst->crc_super_cclk_div);
-
-	/* Always enable the main CPU complex clocks */
-	clock_enable(PERIPH_ID_CPU);
-	clock_enable(PERIPH_ID_CPULP);
-	clock_enable(PERIPH_ID_CPUG);
-}
-
-static void remove_cpu_resets(void)
-{
-	struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
-	u32 reg;
-
-	debug("remove_cpu_resets entry\n");
-	/* Take the slow non-CPU partition out of reset */
-	reg = readl(&clkrst->crc_rst_cpulp_cmplx_clr);
-	writel((reg | CLR_NONCPURESET), &clkrst->crc_rst_cpulp_cmplx_clr);
-
-	/* Take the fast non-CPU partition out of reset */
-	reg = readl(&clkrst->crc_rst_cpug_cmplx_clr);
-	writel((reg | CLR_NONCPURESET), &clkrst->crc_rst_cpug_cmplx_clr);
-
-	/* Clear the SW-controlled reset of the slow cluster */
-	reg = readl(&clkrst->crc_rst_cpulp_cmplx_clr);
-	reg |= (CLR_CPURESET0+CLR_DBGRESET0+CLR_CORERESET0+CLR_CXRESET0);
-	writel(reg, &clkrst->crc_rst_cpulp_cmplx_clr);
-
-	/* Clear the SW-controlled reset of the fast cluster */
-	reg = readl(&clkrst->crc_rst_cpug_cmplx_clr);
-	reg |= (CLR_CPURESET0+CLR_DBGRESET0+CLR_CORERESET0+CLR_CXRESET0);
-	reg |= (CLR_CPURESET1+CLR_DBGRESET1+CLR_CORERESET1+CLR_CXRESET1);
-	reg |= (CLR_CPURESET2+CLR_DBGRESET2+CLR_CORERESET2+CLR_CXRESET2);
-	reg |= (CLR_CPURESET3+CLR_DBGRESET3+CLR_CORERESET3+CLR_CXRESET3);
-	writel(reg, &clkrst->crc_rst_cpug_cmplx_clr);
-}
-
-/**
- * The T114 requires some special clock initialization, including setting up
- * the DVC I2C, turning on MSELECT and selecting the G CPU cluster
- */
-void t114_init_clocks(void)
-{
-	struct clk_rst_ctlr *clkrst =
-			(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
-	struct flow_ctlr *flow = (struct flow_ctlr *)NV_PA_FLOW_BASE;
-	u32 val;
-
-	debug("t114_init_clocks entry\n");
-
-	/* Set active CPU cluster to G */
-	clrbits_le32(&flow->cluster_control, 1);
-
-	writel(SUPER_SCLK_ENB_MASK, &clkrst->crc_super_sclk_div);
-
-	debug("Setting up PLLX\n");
-	init_pllx();
-
-	val = (1 << CLK_SYS_RATE_AHB_RATE_SHIFT);
-	writel(val, &clkrst->crc_clk_sys_rate);
-
-	/* Enable clocks to required peripherals. TBD - minimize this list */
-	debug("Enabling clocks\n");
-
-	clock_set_enable(PERIPH_ID_CACHE2, 1);
-	clock_set_enable(PERIPH_ID_GPIO, 1);
-	clock_set_enable(PERIPH_ID_TMR, 1);
-	clock_set_enable(PERIPH_ID_RTC, 1);
-	clock_set_enable(PERIPH_ID_CPU, 1);
-	clock_set_enable(PERIPH_ID_EMC, 1);
-	clock_set_enable(PERIPH_ID_I2C5, 1);
-	clock_set_enable(PERIPH_ID_FUSE, 1);
-	clock_set_enable(PERIPH_ID_PMC, 1);
-	clock_set_enable(PERIPH_ID_APBDMA, 1);
-	clock_set_enable(PERIPH_ID_MEM, 1);
-	clock_set_enable(PERIPH_ID_IRAMA, 1);
-	clock_set_enable(PERIPH_ID_IRAMB, 1);
-	clock_set_enable(PERIPH_ID_IRAMC, 1);
-	clock_set_enable(PERIPH_ID_IRAMD, 1);
-	clock_set_enable(PERIPH_ID_CORESIGHT, 1);
-	clock_set_enable(PERIPH_ID_MSELECT, 1);
-	clock_set_enable(PERIPH_ID_EMC1, 1);
-	clock_set_enable(PERIPH_ID_MC1, 1);
-	clock_set_enable(PERIPH_ID_DVFS, 1);
-
-	/*
-	 * Set MSELECT clock source as PLLP (00), and ask for a clock
-	 * divider that would set the MSELECT clock at 102MHz for a
-	 * PLLP base of 408MHz.
-	 */
-	clock_ll_set_source_divisor(PERIPH_ID_MSELECT, 0,
-		CLK_DIVIDER(NVBL_PLLP_KHZ, 102000));
-
-	/* I2C5 (DVC) gets CLK_M and a divisor of 17 */
-	clock_ll_set_source_divisor(PERIPH_ID_I2C5, 3, 16);
-
-	/* Give clocks time to stabilize */
-	udelay(1000);
-
-	/* Take required peripherals out of reset */
-	debug("Taking periphs out of reset\n");
-	reset_set_enable(PERIPH_ID_CACHE2, 0);
-	reset_set_enable(PERIPH_ID_GPIO, 0);
-	reset_set_enable(PERIPH_ID_TMR, 0);
-	reset_set_enable(PERIPH_ID_COP, 0);
-	reset_set_enable(PERIPH_ID_EMC, 0);
-	reset_set_enable(PERIPH_ID_I2C5, 0);
-	reset_set_enable(PERIPH_ID_FUSE, 0);
-	reset_set_enable(PERIPH_ID_APBDMA, 0);
-	reset_set_enable(PERIPH_ID_MEM, 0);
-	reset_set_enable(PERIPH_ID_CORESIGHT, 0);
-	reset_set_enable(PERIPH_ID_MSELECT, 0);
-	reset_set_enable(PERIPH_ID_EMC1, 0);
-	reset_set_enable(PERIPH_ID_MC1, 0);
-	reset_set_enable(PERIPH_ID_DVFS, 0);
-
-	debug("t114_init_clocks exit\n");
-}
-
-static bool is_partition_powered(u32 partid)
-{
-	struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
-	u32 reg;
-
-	/* Get power gate status */
-	reg = readl(&pmc->pmc_pwrgate_status);
-	return !!(reg & (1 << partid));
-}
-
-static bool is_clamp_enabled(u32 partid)
-{
-	struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
-	u32 reg;
-
-	/* Get clamp status. */
-	reg = readl(&pmc->pmc_clamp_status);
-	return !!(reg & (1 << partid));
-}
-
-static void power_partition(u32 partid)
-{
-	struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
-
-	debug("%s: part ID = %08X\n", __func__, partid);
-	/* Is the partition already on? */
-	if (!is_partition_powered(partid)) {
-		/* No, toggle the partition power state (OFF -> ON) */
-		debug("power_partition, toggling state\n");
-		writel(START_CP | partid, &pmc->pmc_pwrgate_toggle);
-
-		/* Wait for the power to come up */
-		while (!is_partition_powered(partid))
-			;
-
-		/* Wait for the clamp status to be cleared */
-		while (is_clamp_enabled(partid))
-			;
-
-		/* Give I/O signals time to stabilize */
-		udelay(IO_STABILIZATION_DELAY);
-	}
-}
-
-void powerup_cpus(void)
-{
-	debug("powerup_cpus entry\n");
-
-	/* We boot to the fast cluster */
-	debug("powerup_cpus entry: G cluster\n");
-	/* Power up the fast cluster rail partition */
-	power_partition(CRAIL);
-
-	/* Power up the fast cluster non-CPU partition */
-	power_partition(C0NC);
-
-	/* Power up the fast cluster CPU0 partition */
-	power_partition(CE0);
-}
-
-void start_cpu(u32 reset_vector)
-{
-	u32 imme, inst;
-
-	debug("start_cpu entry, reset_vector = %x\n", reset_vector);
-
-	t114_init_clocks();
-
-	/* Enable VDD_CPU */
-	enable_cpu_power_rail();
-
-	/* Get the CPU(s) running */
-	enable_cpu_clocks();
-
-	/* Enable CoreSight */
-	clock_enable_coresight(1);
-
-	/* Take CPU(s) out of reset */
-	remove_cpu_resets();
-
-	/* Set the entry point for CPU execution from reset */
-
-	/*
-	 * A01P with patched boot ROM; vector hard-coded to 0x4003fffc.
-	 * See nvbug 1193357 for details.
-	 */
-
-	/* mov r0, #lsb(reset_vector) */
-	imme = reset_vector & 0xffff;
-	inst = imme & 0xfff;
-	inst |= ((imme >> 12) << 16);
-	inst |= 0xe3000000;
-	writel(inst, 0x4003fff0);
-
-	/* movt r0, #msb(reset_vector) */
-	imme = (reset_vector >> 16) & 0xffff;
-	inst = imme & 0xfff;
-	inst |= ((imme >> 12) << 16);
-	inst |= 0xe3400000;
-	writel(inst, 0x4003fff4);
-
-	/* bx r0 */
-	writel(0xe12fff10, 0x4003fff8);
-
-	/* b -12 */
-	imme = (u32)-20;
-	inst = (imme >> 2) & 0xffffff;
-	inst |= 0xea000000;
-	writel(inst, 0x4003fffc);
-
-	/* Write to orignal location for compatibility */
-	writel(reset_vector, EXCEP_VECTOR_CPU_RESET_VECTOR);
-
-	/* If the CPU(s) don't already have power, power 'em up */
-	powerup_cpus();
-}