ARM: add tegra20 support to arm720t

Add support for tegra20 arm7 boot processor.  This processor is used
to power on the Cortex A9 and transfer control to it.  In tegra this
processor is an ARM7TDMI not an ARM720T, but since we don't use cache
it was easier to just reuse the ARM720T code as the processors are
otherwise identical except for cache and MMU.

Signed-off-by: Allen Martin <amartin@nvidia.com>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Tested-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Tom Warren <twarren@nvidia.com>

1 files changed, 258 insertions, 0 deletions

diff --git a/arch/arm/cpu/arm720t/tegra20/cpu.c b/arch/arm/cpu/arm720t/tegra20/cpu.c
new file mode 100644
index 0000000000..6d4d66bced
--- /dev/null
+++ b/arch/arm/cpu/arm720t/tegra20/cpu.c
@@ -0,0 +1,258 @@
+/*
+* (C) Copyright 2010-2011
+* NVIDIA Corporation <www.nvidia.com>
+*
+* See file CREDITS for list of people who contributed to this
+* project.
+*
+* This program is free software; you can redistribute it and/or
+* modify it under the terms of the GNU General Public License as
+* published by the Free Software Foundation; either version 2 of
+* the License, or (at your option) any later version.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program; if not, write to the Free Software
+* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+* MA 02111-1307 USA
+*/
+
+#include <asm/io.h>
+#include <asm/arch/tegra20.h>
+#include <asm/arch/clk_rst.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/pmc.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch/scu.h>
+#include <common.h>
+#include "cpu.h"
+
+/* Returns 1 if the current CPU executing is a Cortex-A9, else 0 */
+int ap20_cpu_is_cortexa9(void)
+{
+	u32 id = readb(NV_PA_PG_UP_BASE + PG_UP_TAG_0);
+	return id == (PG_UP_TAG_0_PID_CPU & 0xff);
+}
+
+void init_pllx(void)
+{
+	struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+	struct clk_pll *pll = &clkrst->crc_pll[CLOCK_ID_XCPU];
+	u32 reg;
+
+	/* If PLLX is already enabled, just return */
+	if (readl(&pll->pll_base) & PLL_ENABLE_MASK)
+		return;
+
+	/* Set PLLX_MISC */
+	writel(1 << PLL_CPCON_SHIFT, &pll->pll_misc);
+
+	/* Use 12MHz clock here */
+	reg = PLL_BYPASS_MASK | (12 << PLL_DIVM_SHIFT);
+	reg |= 1000 << PLL_DIVN_SHIFT;
+	writel(reg, &pll->pll_base);
+
+	reg |= PLL_ENABLE_MASK;
+	writel(reg, &pll->pll_base);
+
+	reg &= ~PLL_BYPASS_MASK;
+	writel(reg, &pll->pll_base);
+}
+
+static void enable_cpu_clock(int enable)
+{
+	struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+	u32 clk;
+
+	/*
+	 * NOTE:
+	 * Regardless of whether the request is to enable or disable the CPU
+	 * clock, every processor in the CPU complex except the master (CPU 0)
+	 * will have it's clock stopped because the AVP only talks to the
+	 * master. The AVP does not know (nor does it need to know) that there
+	 * are multiple processors in the CPU complex.
+	 */
+
+	if (enable) {
+		/* Initialize PLLX */
+		init_pllx();
+
+		/* Wait until all clocks are stable */
+		udelay(PLL_STABILIZATION_DELAY);
+
+		writel(CCLK_BURST_POLICY, &clkrst->crc_cclk_brst_pol);
+		writel(SUPER_CCLK_DIVIDER, &clkrst->crc_super_cclk_div);
+	}
+
+	/*
+	 * Read the register containing the individual CPU clock enables and
+	 * always stop the clock to CPU 1.
+	 */
+	clk = readl(&clkrst->crc_clk_cpu_cmplx);
+	clk |= 1 << CPU1_CLK_STP_SHIFT;
+
+	/* Stop/Unstop the CPU clock */
+	clk &= ~CPU0_CLK_STP_MASK;
+	clk |= !enable << CPU0_CLK_STP_SHIFT;
+	writel(clk, &clkrst->crc_clk_cpu_cmplx);
+
+	clock_enable(PERIPH_ID_CPU);
+}
+
+static int is_cpu_powered(void)
+{
+	struct pmc_ctlr *pmc = (struct pmc_ctlr *)TEGRA20_PMC_BASE;
+
+	return (readl(&pmc->pmc_pwrgate_status) & CPU_PWRED) ? 1 : 0;
+}
+
+static void remove_cpu_io_clamps(void)
+{
+	struct pmc_ctlr *pmc = (struct pmc_ctlr *)TEGRA20_PMC_BASE;
+	u32 reg;
+
+	/* Remove the clamps on the CPU I/O signals */
+	reg = readl(&pmc->pmc_remove_clamping);
+	reg |= CPU_CLMP;
+	writel(reg, &pmc->pmc_remove_clamping);
+
+	/* Give I/O signals time to stabilize */
+	udelay(IO_STABILIZATION_DELAY);
+}
+
+static void powerup_cpu(void)
+{
+	struct pmc_ctlr *pmc = (struct pmc_ctlr *)TEGRA20_PMC_BASE;
+	u32 reg;
+	int timeout = IO_STABILIZATION_DELAY;
+
+	if (!is_cpu_powered()) {
+		/* Toggle the CPU power state (OFF -> ON) */
+		reg = readl(&pmc->pmc_pwrgate_toggle);
+		reg &= PARTID_CP;
+		reg |= START_CP;
+		writel(reg, &pmc->pmc_pwrgate_toggle);
+
+		/* Wait for the power to come up */
+		while (!is_cpu_powered()) {
+			if (timeout-- == 0)
+				printf("CPU failed to power up!\n");
+			else
+				udelay(10);
+		}
+
+		/*
+		 * Remove the I/O clamps from CPU power partition.
+		 * Recommended only on a Warm boot, if the CPU partition gets
+		 * power gated. Shouldn't cause any harm when called after a
+		 * cold boot according to HW, probably just redundant.
+		 */
+		remove_cpu_io_clamps();
+	}
+}
+
+static void enable_cpu_power_rail(void)
+{
+	struct pmc_ctlr *pmc = (struct pmc_ctlr *)TEGRA20_PMC_BASE;
+	u32 reg;
+
+	reg = readl(&pmc->pmc_cntrl);
+	reg |= CPUPWRREQ_OE;
+	writel(reg, &pmc->pmc_cntrl);
+
+	/*
+	 * The TI PMU65861C needs a 3.75ms delay between enabling
+	 * the power rail and enabling the CPU clock.  This delay
+	 * between SM1EN and SM1 is for switching time + the ramp
+	 * up of the voltage to the CPU (VDD_CPU from PMU).
+	 */
+	udelay(3750);
+}
+
+static void reset_A9_cpu(int reset)
+{
+	/*
+	* NOTE:  Regardless of whether the request is to hold the CPU in reset
+	*        or take it out of reset, every processor in the CPU complex
+	*        except the master (CPU 0) will be held in reset because the
+	*        AVP only talks to the master. The AVP does not know that there
+	*        are multiple processors in the CPU complex.
+	*/
+
+	/* Hold CPU 1 in reset, and CPU 0 if asked */
+	reset_cmplx_set_enable(1, crc_rst_cpu | crc_rst_de | crc_rst_debug, 1);
+	reset_cmplx_set_enable(0, crc_rst_cpu | crc_rst_de | crc_rst_debug,
+			       reset);
+
+	/* Enable/Disable master CPU reset */
+	reset_set_enable(PERIPH_ID_CPU, reset);
+}
+
+static void clock_enable_coresight(int enable)
+{
+	u32 rst, src;
+
+	clock_set_enable(PERIPH_ID_CORESIGHT, enable);
+	reset_set_enable(PERIPH_ID_CORESIGHT, !enable);
+
+	if (enable) {
+		/*
+		 * Put CoreSight on PLLP_OUT0 (216 MHz) and divide it down by
+		 *  1.5, giving an effective frequency of 144MHz.
+		 * Set PLLP_OUT0 [bits31:30 = 00], and use a 7.1 divisor
+		 *  (bits 7:0), so 00000001b == 1.5 (n+1 + .5)
+		 */
+		src = CLK_DIVIDER(NVBL_PLLP_KHZ, 144000);
+		clock_ll_set_source_divisor(PERIPH_ID_CSI, 0, src);
+
+		/* Unlock the CPU CoreSight interfaces */
+		rst = 0xC5ACCE55;
+		writel(rst, CSITE_CPU_DBG0_LAR);
+		writel(rst, CSITE_CPU_DBG1_LAR);
+	}
+}
+
+void start_cpu(u32 reset_vector)
+{
+	/* Enable VDD_CPU */
+	enable_cpu_power_rail();
+
+	/* Hold the CPUs in reset */
+	reset_A9_cpu(1);
+
+	/* Disable the CPU clock */
+	enable_cpu_clock(0);
+
+	/* Enable CoreSight */
+	clock_enable_coresight(1);
+
+	/*
+	 * Set the entry point for CPU execution from reset,
+	 *  if it's a non-zero value.
+	 */
+	if (reset_vector)
+		writel(reset_vector, EXCEP_VECTOR_CPU_RESET_VECTOR);
+
+	/* Enable the CPU clock */
+	enable_cpu_clock(1);
+
+	/* If the CPU doesn't already have power, power it up */
+	powerup_cpu();
+
+	/* Take the CPU out of reset */
+	reset_A9_cpu(0);
+}
+
+
+void halt_avp(void)
+{
+	for (;;) {
+		writel((HALT_COP_EVENT_JTAG | HALT_COP_EVENT_IRQ_1 \
+			| HALT_COP_EVENT_FIQ_1 | (FLOW_MODE_STOP<<29)),
+			FLOW_CTLR_HALT_COP_EVENTS);
+	}
+}