Merge branch 'master' of git://git.denx.de/u-boot-arm

* 'master' of git://git.denx.de/u-boot-arm: (146 commits)
  arm: Use common .lds file where possible
  arm: add a common .lds link script
  arm: Remove unneeded setting of LDCSRIPT
  Define CPUDIR for the .lds link script
  arm: Remove zipitz2 link script
  Allow arch directory to contain .lds without requiring Makefile
  OMAP: Remove omap1610inn-based boards
  arch/arm/cpu/armv7/omap-common/clocks-common.c: Fix build warnings
  board/ti/beagle/beagle.c: Fix build warnings
  sdrc.c: Fix typo in do_sdrc_init() for SPL
  tegra: i2c: Add I2C driver
  tegra: fdt: i2c: Add extra I2C bindings for U-Boot
  tegra: i2c: Select I2C ordering for Seaboard
  tegra: i2c: Enable I2C on Seaboard
  tegra: i2c: Select number of controllers for Tegra2 boards
  tegra: i2c: Initialise I2C on Nvidia boards
  tegra: Enhance clock support to handle 16-bit clock divisors
  fdt: Add function to allow aliases to refer to multiple nodes
  tegra: Rename NV_PA_PMC_BASE to TEGRA2_PMC_BASE
  tegra: fdt: Enable FDT support for Ventana
  tegra: fdt: Enable FDT support for Seaboard
  tegra: usb: Enable USB on Seaboard
  tegra: usb: Add common USB defines for tegra2 boards
  tegra: usb: Add USB support to nvidia boards
  arm: Check for valid FDT after console is up
  fdt: Avoid early panic() when there is no FDT present
  tegra: usb: Add support for Tegra USB peripheral
  tegra: fdt: Add function to return peripheral/clock ID
  usb: Add support for txfifo threshold
  tegra: usb: fdt: Add USB definitions for Tegra2 Seaboard
  tegra: usb: fdt: Add additional device tree definitions for USB ports
  tegra: fdt: Add clock bindings for Tegra2 Seaboard
  tegra: fdt: Add clock bindings
  tegra: fdt: Add additional USB binding
  fdt: Add tegra-usb bindings file from linux
  fdt: Add staging area for device tree binding documentation
  tegra: fdt: Add device tree file for Tegra2 Seaboard from kernel
  tegra: fdt: Add Tegra2x device tree file from kernel
  arm: fdt: Add skeleton device tree file from kernel
  fdt: Add basic support for decoding GPIO definitions
  fdt: Add functions to access phandles, arrays and bools
  fdt: Tidy up a few fdtdec problems
  fdt: Add tests for fdtdec
  fdt: Add fdtdec_find_aliases() to deal with alias nodes
  arm: Tegra2: Fix ELDK42 gcc failure with inline asm stack pointer load
  net: fec_mxc: allow use with cache enabled
  net: force PKTALIGN to ARCH_DMA_MINALIGN
  i.MX28: Enable caches by default
  i.MX28: Make use of the bounce buffer
  i.MX28: Do data transfers via DMA in MMC driver
  MMC: Implement generic bounce buffer
  i.MX28: Add cache support to MXS NAND driver
  i.MX28: Add cache support into the APBH DMA driver
  ARM926EJS: Implement cache operations
  board/vpac270/onenand.c: Fix build errors
  nhk8815: fix build errors
  atmel-boards: add missing atmel_mci.h
  ARM: highbank: setup env from boot source register
  ARM: highbank: change env config to use nvram
  ARM: highbank: add reset support
  ARM: highbank: Add boot counter support
  ARM: highbank: change TEXT_BASE to 0x8000
  ARM: highbank: fix us_to_tick calculation
  ARM: highbank: add missing get_tbclk
  ARM: highbank: fix warning for calxedaxgmac_initialize
  net: calxedaxgmac: fix build due to missing __aligned definition
  EXYNOS: Add structure for Exynos4 DMC
  EXYNOS: SMDK5250: Support all 4 UARTs
  ARM: fix s3c2410 timer code
  ARM: davinci: fixes for cam_enc_4xx board
  omap3_spi: receive transmit mode
  calimain, enbw_cmc: Fix typo in comments
  Davinci: ea20: use gpio framework to access gpios
  OMAP3: mt_ventoux: sets its own mtdparts
  OMAP3: mt_ventoux: updated timing for FPGA
  twl4030: fix potential power supply handling issues
  NAND: TI: fix warnings in omap_gpmc.c
  cam_enc_4xx: Rename 'images' to 'imgs'
  arm: Add Prep subcommand support to bootm
  OMAP3: twister: add support to boot Linux from SPL
  SPL: call cleanup_before_linux() before booting Linux
  OMAP3: SPL: do not call I2C init if no I2C is set.
  Add cache functions to SPL for armv7
  devkit8000: Implement and activate direct OS boot
  omap/spl: change output of spl_parse_image_header
  omap-common/spl: Add linux boot to SPL
  devkit8000/spl: init GPMC for dm9000 in SPL
  omap-common: Add NAND SPL linux booting
  devkit8000: add config for spl command
  Add cmd_spl command
  mx53ard: Initialize return code with error
  mx53: Make PLL2 to be the parent of UART clock
  configs: imx: Use CONFIG_SF_DEFAULT_CS
  mx28evk: Provide default values for SPI bus and chip select
  USB: ehci-mx6: Add proper IO accessors
  mx6: Read silicon revision from register
  i.MX28: Drop __naked function from spl_mem_init
  mxs_spi: Return proper timeout error
  i.MX28: Make the stabilization delays shorter
  pmic_i2c: Return error in case of invalid pmic_i2c_tx_num
  mx6: Remove duplicate definition of ANATOP_BASE_ADDR
  mx6: Fix reset cause for Power On Reset case
  i.MX6: mx6qsabrelite: add MACH_TYPE_MX6Q_SABRELITE
  i.MX6: mx6q_sabrelite: add CONFIG_REVISION_TAG
  i.MX28: Enable additional DRAM address bits
  mx6q: mx6qsabrelite: setup_spi() should be called in board_init to allow use for environment
  mx31: add "ARM11P power gating" to get_reset_cause
  mx31pdk: Fix CONFIG_SYS_MEMTEST_END
  efikamx: Fix CONFIG_SYS_MEMTEST_END
  mx53smd: Fix CONFIG_SYS_MEMTEST_END
  mx53evk: Fix CONFIG_SYS_MEMTEST_END
  mx51evk: Fix CONFIG_SYS_MEMTEST_END
  i.MX6: mx6qsabrelite: add ext2 support
  imximage: Remove overwriting of flash_offset
  IXP: Fix GPIO_INT_ACT_LOW_SET()
  IXP: Fix NAND build warning on PDNB3 and SCPU
  IXP: Move PDNB3 and SCPU from Makefile to boards.cfg
  IXP: Squash warnings in IXP NPE
  IXP: Fix missing MACH_TYPE_{ACTUX?,PNB3,DVLHOST}
  IXP: Make IXP buildable with arm-linux- toolchains
  Examples: Properly append LDFLAGS to LD command
  SPL: Enable YMODEM support on BeagleBone and AM335x EVM
  SPL: Add YMODEM over UART load support
  SPL: Add README.omap3
  README: document more SPL config options
  spl.c: Use __noreturn decorator
  config.mk: Check for -fstack-usage support
  config.mk: Make cc-option create a file under include/generated
  ...

1 files changed, 20 insertions, 44 deletions

diff --git a/arch/arm/cpu/arm920t/s3c24x0/timer.c b/arch/arm/cpu/arm920t/s3c24x0/timer.c
index 9571870b11..d8668bec5e 100644
--- a/arch/arm/cpu/arm920t/s3c24x0/timer.c
+++ b/arch/arm/cpu/arm920t/s3c24x0/timer.c
@@ -35,19 +35,7 @@
 #include <asm/io.h>
 #include <asm/arch/s3c24x0_cpu.h>
 
-int timer_load_val = 0;
-static ulong timer_clk;
-
-/* macro to read the 16 bit timer */
-static inline ulong READ_TIMER(void)
-{
-	struct s3c24x0_timers *timers = s3c24x0_get_base_timers();
-
-	return readl(&timers->tcnto4) & 0xffff;
-}
-
-static ulong timestamp;
-static ulong lastdec;
+DECLARE_GLOBAL_DATA_PTR;
 
 int timer_init(void)
 {
@@ -57,27 +45,27 @@ int timer_init(void)
 	/* use PWM Timer 4 because it has no output */
 	/* prescaler for Timer 4 is 16 */
 	writel(0x0f00, &timers->tcfg0);
-	if (timer_load_val == 0) {
+	if (gd->tbu == 0) {
 		/*
 		 * for 10 ms clock period @ PCLK with 4 bit divider = 1/2
 		 * (default) and prescaler = 16. Should be 10390
 		 * @33.25MHz and 15625 @ 50 MHz
 		 */
-		timer_load_val = get_PCLK() / (2 * 16 * 100);
-		timer_clk = get_PCLK() / (2 * 16);
+		gd->tbu = get_PCLK() / (2 * 16 * 100);
+		gd->timer_rate_hz = get_PCLK() / (2 * 16);
 	}
 	/* load value for 10 ms timeout */
-	lastdec = timer_load_val;
-	writel(timer_load_val, &timers->tcntb4);
+	writel(gd->tbu, &timers->tcntb4);
 	/* auto load, manual update of timer 4 */
 	tmr = (readl(&timers->tcon) & ~0x0700000) | 0x0600000;
 	writel(tmr, &timers->tcon);
 	/* auto load, start timer 4 */
 	tmr = (tmr & ~0x0700000) | 0x0500000;
 	writel(tmr, &timers->tcon);
-	timestamp = 0;
+	gd->lastinc = 0;
+	gd->tbl = 0;
 
-	return (0);
+	return 0;
 }
 
 /*
@@ -94,7 +82,7 @@ void __udelay (unsigned long usec)
 	ulong start = get_ticks();
 
 	tmo = usec / 1000;
-	tmo *= (timer_load_val * 100);
+	tmo *= (gd->tbu * 100);
 	tmo /= 1000;
 
 	while ((ulong) (get_ticks() - start) < tmo)
@@ -105,7 +93,7 @@ ulong get_timer_masked(void)
 {
 	ulong tmr = get_ticks();
 
-	return tmr / (timer_clk / CONFIG_SYS_HZ);
+	return tmr / (gd->timer_rate_hz / CONFIG_SYS_HZ);
 }
 
 void udelay_masked(unsigned long usec)
@@ -116,10 +104,10 @@ void udelay_masked(unsigned long usec)
 
 	if (usec >= 1000) {
 		tmo = usec / 1000;
-		tmo *= (timer_load_val * 100);
+		tmo *= (gd->tbu * 100);
 		tmo /= 1000;
 	} else {
-		tmo = usec * (timer_load_val * 100);
+		tmo = usec * (gd->tbu * 100);
 		tmo /= (1000 * 1000);
 	}
 
@@ -137,18 +125,19 @@ void udelay_masked(unsigned long usec)
  */
 unsigned long long get_ticks(void)
 {
-	ulong now = READ_TIMER();
+	struct s3c24x0_timers *timers = s3c24x0_get_base_timers();
+	ulong now = readl(&timers->tcnto4) & 0xffff;
 
-	if (lastdec >= now) {
+	if (gd->lastinc >= now) {
 		/* normal mode */
-		timestamp += lastdec - now;
+		gd->tbl += gd->lastinc - now;
 	} else {
 		/* we have an overflow ... */
-		timestamp += lastdec + timer_load_val - now;
+		gd->tbl += gd->lastinc + gd->tbu - now;
 	}
-	lastdec = now;
+	gd->lastinc = now;
 
-	return timestamp;
+	return gd->tbl;
 }
 
 /*
@@ -157,20 +146,7 @@ unsigned long long get_ticks(void)
  */
 ulong get_tbclk(void)
 {
-	ulong tbclk;
-
-#if defined(CONFIG_SMDK2400)
-	tbclk = timer_load_val * 100;
-#elif defined(CONFIG_SBC2410X) || \
-      defined(CONFIG_SMDK2410) || \
-	defined(CONFIG_S3C2440) || \
-      defined(CONFIG_VCMA9)
-	tbclk = CONFIG_SYS_HZ;
-#else
-#	error "tbclk not configured"
-#endif
-
-	return tbclk;
+	return CONFIG_SYS_HZ;
 }
 
 /*