Merge branch 'master' of git://git.denx.de/u-boot-arm

* 'master' of git://git.denx.de/u-boot-arm:
  ARM: Add Calxeda Highbank platform
  dkb: make mmc command as default enabled
  Marvell: dkb: add mmc support
  ARM: pantheon: add mmc definition
  davinci: remove config.mk file from the sources
  ARM:AM33XX: Add support for TI AM335X EVM
  ARM:AM33XX: Added timer support
  ARM:AM33XX: Add emif/ddr support
  ARM:AM33XX: Add clock definitions
  ARM:AM33XX: Added support for AM33xx
  omap3/emif4: fix registers definition
  davinci: remove obsolete macro CONFIG_EMAC_MDIO_PHY_NUM
  davinci: emac: add support for more than 1 PHYs
  davinci: emac: add new features to autonegotiate for EMAC
  da850evm: Move LPSC configuration to board_early_init_f()
  omap4_panda: Build in cmd_gpio support on panda
  omap: Don't use gpio_free to change direction to input
  mmc: omap: Allow OMAP_HSMMC[23]_BASE to be unset
  OMAP3: overo : Add environment variable optargs to bootargs
  OMAP3: overo: Move ethernet CS4 configuration to execute based on board id
  OMAP3: overo : Use ttyO2 instead of ttyS2.
  da830: add support for NAND boot mode
  dm36x: revert cache disable patch
  dm644X: revert cache disable patch
  devkit8000: Add malloc space
  omap: spl: fix build break due to changes in FAT
  OMAP3 SPL: Provide weak omap_rev_string
  omap: beagle: Use ubifs instead of jffs2 for nand boot
  omap: overo: Disable pull-ups on camera PCLK, HS and VS signals
  omap: overo: Configure mux for gpio10
  SPL: Add DMA library
  omap3: Add interface for omap3 DMA
  omap3: Add DMA register accessors
  omap3: Add Base register for DMA
  arm, davinci: add missing LSPC define for MMC/SD1
  U-Boot/SPL: omap4: Make ddr pre-calculated timings as default.
  DaVinci: correct MDSTAT.STATE mask
  omap4: splitting padconfs into common, 4430 and 4460
  omap4: adding revision detection for 4460 ES1.1
  omap4: replacing OMAP4_CONTROL with OMAP4430_CONTROL
  gplug: fixed build error as a result of code cleanup patch
  kirkwood_spi: add dummy spi_init()
  gpio: mvmfp: reduce include platform file
  ARM: orion5x: reduce dependence of including platform file
  serial: reduce include platform file for marvell chip
  ARM: kirkwood: reduce dependence of including platform file
  ARM: armada100: reduce dependence of including platform file
  ARM: pantheon: reduce dependence of including platform file
  Armada100: Add env storage support for Marvell gplugD
  Armada100: Add SPI flash support for Marvell gplugD
  Armada100: Add SPI support for Marvell gplugD
  SPI: Add SPI driver support for Marvell Armada100
  dreamplug: initial board support.
  imx: fix coding style
  misc: pmic: drop old Freescale's pmic driver
  MX31: mx31pdk: use new pmic driver
  MX31: mx31ads: use new pmic driver
  MX31: mx31_litekit: use new pmic driver
  MX5: mx53evk: use new pmic driver
  MX5: mx51evk: use new pmic driver
  MX35: mx35pdk: use new pmic driver
  misc: pmic: addI2C  support to pmic_fsl driver
  misc: pmic: use I2C_SET_BUS in pmic I2C
  MX5: efikamx/efikasb: use new pmic driver
  MX3: qong: use new pmic driver
  RTC: Switch mc13783 to generic pmic code
  MX5: vision2: use new pmic driver
  misc: pmic: Freescale PMIC switches to generic PMIC driver
  misc:pmic:samsung Enable PMIC driver at GONI target
  misc:pmic:max8998 MAX8998 support at a new PMIC driver.
  misc:pmic:core New generic PMIC driver
  mx31pdk: Remove unneeded config
  mx31: provide readable WEIM CS accessor
  MX51: vision2: Set global macros
  I2C: Add i2c_get/set_speed() to mxc_i2c.c
  ARM: Update mach-types
  devkit8000: Add config to enable SPL MMC boot
  devkit8000: protect board_mmc_init
  arm, post: add missing post_time_ms for arm
  cosmetic, post: Codingstyle cleanup
  arm, logbuffer: make it compileclean
  tegra2: Enable MMC for Seaboard
  tegra2: Add more pinmux functions
  tegra2: Rename PIN_ to PINGRP_
  tegra2: Add more clock functions
  tegra2: Clean up board code a little
  tegra2: Rename CLOCK_PLL_ID to CLOCK_ID

4 files changed, 9 insertions, 41 deletions

diff --git a/arch/arm/cpu/arm926ejs/davinci/config.mk b/arch/arm/cpu/arm926ejs/davinci/config.mk
deleted file mode 100644
index 565adda11d..0000000000
--- a/arch/arm/cpu/arm926ejs/davinci/config.mk
+++ /dev/null
@@ -1,32 +0,0 @@
-#
-# (C) Copyright 2002
-# Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-PLATFORM_RELFLAGS += -fno-common -ffixed-r8 -msoft-float
-
-PLATFORM_CPPFLAGS += -march=armv5te
-# =========================================================================
-#
-# Supply options according to compiler version
-#
-# =========================================================================
-PLATFORM_RELFLAGS +=$(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,))
diff --git a/arch/arm/cpu/arm926ejs/davinci/et1011c.c b/arch/arm/cpu/arm926ejs/davinci/et1011c.c
index da073457a3..df35e44d13 100644
--- a/arch/arm/cpu/arm926ejs/davinci/et1011c.c
+++ b/arch/arm/cpu/arm926ejs/davinci/et1011c.c
@@ -39,11 +39,9 @@ int et1011c_get_link_speed(int phy_addr)
 	u_int16_t	data;
 
 	if (davinci_eth_phy_read(phy_addr, MII_STATUS_REG, &data) && (data & 0x04)) {
-		davinci_eth_phy_read(EMAC_MDIO_PHY_NUM,
-				MII_PHY_CONFIG_REG, &data);
+		davinci_eth_phy_read(phy_addr, MII_PHY_CONFIG_REG, &data);
 		/* Enable 125MHz clock sourced from PHY */
-		davinci_eth_phy_write(EMAC_MDIO_PHY_NUM,
-			MII_PHY_CONFIG_REG,
+		davinci_eth_phy_write(phy_addr, MII_PHY_CONFIG_REG,
 			data | PHY_SYS_CLK_EN);
 		return (1);
 	}
diff --git a/arch/arm/cpu/arm926ejs/davinci/lowlevel_init.S b/arch/arm/cpu/arm926ejs/davinci/lowlevel_init.S
index 0a4b2cf674..7a169b1076 100644
--- a/arch/arm/cpu/arm926ejs/davinci/lowlevel_init.S
+++ b/arch/arm/cpu/arm926ejs/davinci/lowlevel_init.S
@@ -45,6 +45,8 @@
 
 #include <config.h>
 
+#define MDSTAT_STATE	0x3f
+
 .globl	lowlevel_init
 lowlevel_init:
 
@@ -268,7 +270,7 @@ checkStatClkStop:
 checkDDRStatClkStop:
 	ldr	r6, MDSTAT_DDR2
 	ldr	r7, [r6]
-	and	r7, r7, $0x1f
+	and	r7, r7, $MDSTAT_STATE
 	cmp	r7, $0x03
 	bne	checkDDRStatClkStop
 
@@ -343,7 +345,7 @@ checkStatClkStop2:
 checkDDRStatClkStop2:
 	ldr	r6, MDSTAT_DDR2
 	ldr	r7, [r6]
-	and	r7, r7, $0x1f
+	and	r7, r7, $MDSTAT_STATE
 	cmp	r7, $0x01
 	bne	checkDDRStatClkStop2
 
@@ -374,7 +376,7 @@ checkStatClkEn2:
 checkDDRStatClkEn2:
 	ldr	r6, MDSTAT_DDR2
 	ldr	r7, [r6]
-	and	r7, r7, $0x1f
+	and	r7, r7, $MDSTAT_STATE
 	cmp	r7, $0x03
 	bne	checkDDRStatClkEn2
 
diff --git a/arch/arm/cpu/arm926ejs/davinci/psc.c b/arch/arm/cpu/arm926ejs/davinci/psc.c
index 8273a7fae4..707fa47e31 100644
--- a/arch/arm/cpu/arm926ejs/davinci/psc.c
+++ b/arch/arm/cpu/arm926ejs/davinci/psc.c
@@ -83,7 +83,7 @@ void lpsc_on(unsigned int id)
 	while (readl(ptstat) & 0x01)
 		continue;
 
-	if ((readl(mdstat) & 0x1f) == 0x03)
+	if ((readl(mdstat) & PSC_MDSTAT_STATE) == 0x03)
 		return; /* Already on and enabled */
 
 	writel(readl(mdctl) | 0x03, mdctl);
@@ -114,7 +114,7 @@ void lpsc_on(unsigned int id)
 
 	while (readl(ptstat) & 0x01)
 		continue;
-	while ((readl(mdstat) & 0x1f) != 0x03)
+	while ((readl(mdstat) & PSC_MDSTAT_STATE) != 0x03)
 		continue;
 }