armv7: ls102xa: Add workaround for DDR erratum A-008850

Barrier transactions from CCI400 need to be disabled till
the DDR is configured, otherwise it may lead to system hang.
The patch adds workaround to fix the erratum.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com>
Signed-off-by: Alison Wang <alison.wang@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>

1 files changed, 37 insertions, 7 deletions

diff --git a/arch/arm/cpu/armv7/ls102xa/soc.c b/arch/arm/cpu/armv7/ls102xa/soc.c
index 448d951c36..a779d33739 100644
--- a/arch/arm/cpu/armv7/ls102xa/soc.c
+++ b/arch/arm/cpu/armv7/ls102xa/soc.c
@@ -11,6 +11,7 @@
 #include <asm/arch/ls102xa_soc.h>
 #include <asm/arch/ls102xa_stream_id.h>
 #include <fsl_csu.h>
+#include <fsl_ddr_sdram.h>
 
 struct liodn_id_table sec_liodn_tbl[] = {
 	SET_SEC_JR_LIODN_ENTRY(0, 0x10, 0x10),
@@ -103,6 +104,41 @@ static void erratum_a009007(void)
 #endif /* CONFIG_SYS_FSL_ERRATUM_A009007 */
 }
 
+static void erratum_a008850_early(void)
+{
+#ifdef CONFIG_SYS_FSL_ERRATUM_A008850
+	/* part 1 of 2 */
+	struct ccsr_cci400 __iomem *cci = (void *)(CONFIG_SYS_IMMR +
+						CONFIG_SYS_CCI400_OFFSET);
+	struct ccsr_ddr __iomem *ddr = (void *)CONFIG_SYS_FSL_DDR_ADDR;
+
+	/* disables propagation of barrier transactions to DDRC from CCI400 */
+	out_le32(&cci->ctrl_ord, CCI400_CTRLORD_TERM_BARRIER);
+
+	/* disable the re-ordering in DDRC */
+	out_be32(&ddr->eor, DDR_EOR_RD_REOD_DIS | DDR_EOR_WD_REOD_DIS);
+#endif
+}
+
+void erratum_a008850_post(void)
+{
+#ifdef CONFIG_SYS_FSL_ERRATUM_A008850
+	/* part 2 of 2 */
+	struct ccsr_cci400 __iomem *cci = (void *)(CONFIG_SYS_IMMR +
+						CONFIG_SYS_CCI400_OFFSET);
+	struct ccsr_ddr __iomem *ddr = (void *)CONFIG_SYS_FSL_DDR_ADDR;
+	u32 tmp;
+
+	/* enable propagation of barrier transactions to DDRC from CCI400 */
+	out_le32(&cci->ctrl_ord, CCI400_CTRLORD_EN_BARRIER);
+
+	/* enable the re-ordering in DDRC */
+	tmp = in_be32(&ddr->eor);
+	tmp &= ~(DDR_EOR_RD_REOD_DIS | DDR_EOR_WD_REOD_DIS);
+	out_be32(&ddr->eor, tmp);
+#endif
+}
+
 void s_init(void)
 {
 }
@@ -163,13 +199,6 @@ int arch_soc_init(void)
 		 */
 		out_le32(&cci->slave[1].sha_ord, CCI400_SHAORD_NON_SHAREABLE);
 		out_le32(&cci->slave[2].sha_ord, CCI400_SHAORD_NON_SHAREABLE);
-
-		/* Workaround for the issue that DDR could not respond to
-		 * barrier transaction which is generated by executing DSB/ISB
-		 * instruction. Set CCI-400 control override register to
-		 * terminate the barrier transaction. After DDR is initialized,
-		 * allow barrier transaction to DDR again */
-		out_le32(&cci->ctrl_ord, CCI400_CTRLORD_TERM_BARRIER);
 	}
 
 	/* Enable all the snoop signal for various masters */
@@ -191,6 +220,7 @@ int arch_soc_init(void)
 	out_be32(&scfg->eddrtqcfg, 0x63b20042);
 
 	/* Erratum */
+	erratum_a008850_early();
 	erratum_a009008();
 	erratum_a009798();
 	erratum_a008997();