ARM: OMAP5: Add DDR changes required for OMAP543X ES2.0 SOCs

Add pre calculated timing settings of LPDDR2 and DDR3 memories
present in OMAP5430 and OMAP5432 ES2.0 versions.

Also adding the DDR pad io settings required for
OMAP543X SOCs here.

Signed-off-by: R Sricharan <r.sricharan@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@ti.com>
Cc: Tom Rini <trini@ti.com>

1 files changed, 73 insertions, 2 deletions

diff --git a/arch/arm/cpu/armv7/omap5/sdram.c b/arch/arm/cpu/armv7/omap5/sdram.c
index 687800facc..2ef7fcdf4c 100644
--- a/arch/arm/cpu/armv7/omap5/sdram.c
+++ b/arch/arm/cpu/armv7/omap5/sdram.c
@@ -67,6 +67,25 @@ const struct emif_regs emif_regs_532_mhz_2cs = {
 	.emif_ddr_ext_phy_ctrl_5	= 0x04010040
 };
 
+const struct emif_regs emif_regs_532_mhz_2cs_es2 = {
+	.sdram_config_init		= 0x80800EBA,
+	.sdram_config			= 0x808022BA,
+	.ref_ctrl			= 0x0000081A,
+	.sdram_tim1			= 0x772F6873,
+	.sdram_tim2			= 0x304a129a,
+	.sdram_tim3			= 0x02f7e45f,
+	.read_idle_ctrl			= 0x00050000,
+	.zq_config			= 0x100b3215,
+	.temp_alert_config		= 0x08000a05,
+	.emif_ddr_phy_ctlr_1_init	= 0x0E30400d,
+	.emif_ddr_phy_ctlr_1		= 0x0E30400d,
+	.emif_ddr_ext_phy_ctrl_1	= 0x04020080,
+	.emif_ddr_ext_phy_ctrl_2	= 0x28C518A3,
+	.emif_ddr_ext_phy_ctrl_3	= 0x518A3146,
+	.emif_ddr_ext_phy_ctrl_4	= 0x0014628C,
+	.emif_ddr_ext_phy_ctrl_5	= 0xC330CC33,
+};
+
 const struct emif_regs emif_regs_266_mhz_2cs = {
 	.sdram_config_init		= 0x80800EBA,
 	.sdram_config			= 0x808022BA,
@@ -109,6 +128,29 @@ const struct emif_regs emif_regs_ddr3_532_mhz_1cs = {
 	.emif_rd_wr_exec_thresh		= 0x00000305
 };
 
+const struct emif_regs emif_regs_ddr3_532_mhz_1cs_es2 = {
+	.sdram_config_init              = 0x61851B32,
+	.sdram_config                   = 0x61851B32,
+	.ref_ctrl                       = 0x00001035,
+	.sdram_tim1                     = 0xCCCF36B3,
+	.sdram_tim2                     = 0x308F7FDA,
+	.sdram_tim3                     = 0x027F88A8,
+	.read_idle_ctrl                 = 0x00050000,
+	.zq_config                      = 0x1007190B,
+	.temp_alert_config              = 0x00000000,
+	.emif_ddr_phy_ctlr_1_init       = 0x0030400A,
+	.emif_ddr_phy_ctlr_1            = 0x0034400A,
+	.emif_ddr_ext_phy_ctrl_1        = 0x04040100,
+	.emif_ddr_ext_phy_ctrl_2        = 0x00000000,
+	.emif_ddr_ext_phy_ctrl_3        = 0x00000000,
+	.emif_ddr_ext_phy_ctrl_4        = 0x00000000,
+	.emif_ddr_ext_phy_ctrl_5        = 0x4350D435,
+	.emif_rd_wr_lvl_rmp_win         = 0x00000000,
+	.emif_rd_wr_lvl_rmp_ctl         = 0x80000000,
+	.emif_rd_wr_lvl_ctl             = 0x00000000,
+	.emif_rd_wr_exec_thresh         = 0x40000305
+};
+
 const struct dmm_lisa_map_regs lisa_map_4G_x_2_x_2 = {
 	.dmm_lisa_map_0 = 0x0,
 	.dmm_lisa_map_1 = 0x0,
@@ -125,8 +167,12 @@ static void emif_get_reg_dump_sdp(u32 emif_nr, const struct emif_regs **regs)
 	case OMAP5432_ES1_0:
 		*regs = &emif_regs_ddr3_532_mhz_1cs;
 		break;
+	case OMAP5430_ES2_0:
+		*regs = &emif_regs_532_mhz_2cs_es2;
+		break;
+	case OMAP5432_ES2_0:
 	default:
-		*regs = &emif_regs_ddr3_532_mhz_1cs;
+		*regs = &emif_regs_ddr3_532_mhz_1cs_es2;
 	}
 }
 
@@ -210,6 +256,28 @@ const u32 ddr3_ext_phy_ctrl_const_base_es1[EMIF_EXT_PHY_CTRL_CONST_REG] = {
 	0x00000057
 };
 
+const u32 ddr3_ext_phy_ctrl_const_base_es2[EMIF_EXT_PHY_CTRL_CONST_REG] = {
+	0x50D4350D,
+	0x00000D43,
+	0x04010040,
+	0x01004010,
+	0x00001004,
+	0x00000000,
+	0x00000000,
+	0x00000000,
+	0x80080080,
+	0x00800800,
+	0x08102040,
+	0x00000002,
+	0x00000000,
+	0x00000000,
+	0x00000000,
+	0x00000000,
+	0x00000000,
+	0x00000000,
+	0x00000057
+};
+
 const struct lpddr2_mr_regs mr_regs = {
 	.mr1	= MR1_BL_8_BT_SEQ_WRAP_EN_NWR_8,
 	.mr2	= 0x6,
@@ -222,13 +290,16 @@ static void emif_get_ext_phy_ctrl_const_regs(const u32 **regs)
 {
 	switch (omap_revision()) {
 	case OMAP5430_ES1_0:
+	case OMAP5430_ES2_0:
 		*regs = ext_phy_ctrl_const_base;
 		break;
 	case OMAP5432_ES1_0:
 		*regs = ddr3_ext_phy_ctrl_const_base_es1;
 		break;
+	case OMAP5432_ES2_0:
 	default:
-		*regs = ddr3_ext_phy_ctrl_const_base_es1;
+		*regs = ddr3_ext_phy_ctrl_const_base_es2;
+
 	}
 }