diff options
| author | Lokesh Vutla <lokeshvutla@ti.com> | 2016-03-05 17:32:30 +0530 |
|---|---|---|
| committer | Tom Rini <trini@konsulko.com> | 2016-03-14 19:18:47 -0400 |
| commit | e3ce3aa103c9e40415673df70ee62732cdb966c3 (patch) | |
| tree | dbc82cfd76bafe62c246e9aceca54397351aea0e /arch/arm/cpu/armv7/omap5 | |
| parent | 4571c519b4581cffc49f40d4066c328df4d6cdf0 (diff) | |
ARM: DRA7: emif: Check for enable bits before updating leveling output
Read and write leveling can be enabled independently. Check for these
enable bits before updating the read and write leveling output values.
This will allow to use the combination of software and hardware leveling.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Diffstat (limited to 'arch/arm/cpu/armv7/omap5')
| -rw-r--r-- | arch/arm/cpu/armv7/omap5/sdram.c | 34 |
1 files changed, 26 insertions, 8 deletions
diff --git a/arch/arm/cpu/armv7/omap5/sdram.c b/arch/arm/cpu/armv7/omap5/sdram.c index a8d63c23c8..c386e644b1 100644 --- a/arch/arm/cpu/armv7/omap5/sdram.c +++ b/arch/arm/cpu/armv7/omap5/sdram.c @@ -643,11 +643,12 @@ static void do_ext_phy_settings_dra7(u32 base, const struct emif_regs *regs) u32 *emif_ext_phy_ctrl_base = 0; u32 emif_nr; const u32 *ext_phy_ctrl_const_regs; - u32 i, hw_leveling, size; + u32 i, hw_leveling, size, phy; emif_nr = (base == EMIF1_BASE) ? 1 : 2; hw_leveling = regs->emif_rd_wr_lvl_rmp_ctl >> EMIF_REG_RDWRLVL_EN_SHIFT; + phy = regs->emif_ddr_phy_ctlr_1_init; emif_ext_phy_ctrl_base = (u32 *)&(emif->emif_ddr_ext_phy_ctrl_1); @@ -657,18 +658,35 @@ static void do_ext_phy_settings_dra7(u32 base, const struct emif_regs *regs) writel(ext_phy_ctrl_const_regs[0], &emif_ext_phy_ctrl_base[0]); writel(ext_phy_ctrl_const_regs[0], &emif_ext_phy_ctrl_base[1]); - if (!hw_leveling) { - /* - * Copy the predefined PHY register values - * in case of sw leveling - */ - for (i = 1; i < 25; i++) { + /* + * Copy the predefined PHY register values + * if leveling is disabled. + */ + if (phy & EMIF_DDR_PHY_CTRL_1_RDLVLGATE_MASK_MASK) + for (i = 1; i < 6; i++) { writel(ext_phy_ctrl_const_regs[i], &emif_ext_phy_ctrl_base[i * 2]); writel(ext_phy_ctrl_const_regs[i], &emif_ext_phy_ctrl_base[i * 2 + 1]); } - } else { + + if (phy & EMIF_DDR_PHY_CTRL_1_RDLVL_MASK_MASK) + for (i = 6; i < 11; i++) { + writel(ext_phy_ctrl_const_regs[i], + &emif_ext_phy_ctrl_base[i * 2]); + writel(ext_phy_ctrl_const_regs[i], + &emif_ext_phy_ctrl_base[i * 2 + 1]); + } + + if (phy & EMIF_DDR_PHY_CTRL_1_WRLVL_MASK_MASK) + for (i = 11; i < 25; i++) { + writel(ext_phy_ctrl_const_regs[i], + &emif_ext_phy_ctrl_base[i * 2]); + writel(ext_phy_ctrl_const_regs[i], + &emif_ext_phy_ctrl_base[i * 2 + 1]); + } + + if (hw_leveling) { /* * Write the init value for HW levling to occur */ |