socfpga: Adding Scan Manager driver

Scan Manager driver will be called to configure the IOCSR
scan chain. This configuration will setup the IO buffer settings

Signed-off-by: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@altera.com>
Cc: Wolfgang Denk <wd@denx.de>
CC: Pavel Machek <pavel@denx.de>
Cc: Tom Rini <trini@ti.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>

1 files changed, 209 insertions, 0 deletions

diff --git a/arch/arm/cpu/armv7/socfpga/scan_manager.c b/arch/arm/cpu/armv7/socfpga/scan_manager.c
new file mode 100644
index 0000000000..a820b1b1bf
--- /dev/null
+++ b/arch/arm/cpu/armv7/socfpga/scan_manager.c
@@ -0,0 +1,209 @@
+/*
+ *  Copyright (C) 2013 Altera Corporation <www.altera.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/freeze_controller.h>
+#include <asm/arch/scan_manager.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static const struct socfpga_scan_manager *scan_manager_base =
+		(void *)(SOCFPGA_SCANMGR_ADDRESS);
+static const struct socfpga_freeze_controller *freeze_controller_base =
+		(void *)(SOCFPGA_SYSMGR_ADDRESS + SYSMGR_FRZCTRL_ADDRESS);
+
+/*
+ * Function to check IO scan chain engine status and wait if the engine is
+ * is active. Poll the IO scan chain engine till maximum iteration reached.
+ */
+static inline uint32_t scan_chain_engine_is_idle(uint32_t max_iter)
+{
+	uint32_t scanmgr_status;
+
+	scanmgr_status = readl(&scan_manager_base->stat);
+
+	/* Poll the engine until the scan engine is inactive */
+	while (SCANMGR_STAT_ACTIVE_GET(scanmgr_status) ||
+	      (SCANMGR_STAT_WFIFOCNT_GET(scanmgr_status) > 0)) {
+		max_iter--;
+		if (max_iter > 0)
+			scanmgr_status = readl(&scan_manager_base->stat);
+		else
+			return 0;
+	}
+	return 1;
+}
+
+/* Program HPS IO Scan Chain */
+uint32_t scan_mgr_io_scan_chain_prg(
+	uint32_t io_scan_chain_id,
+	uint32_t io_scan_chain_len_in_bits,
+	const uint32_t *iocsr_scan_chain)
+{
+	uint16_t tdi_tdo_header;
+	uint32_t io_program_iter;
+	uint32_t io_scan_chain_data_residual;
+	uint32_t residual;
+	uint32_t i;
+	uint32_t index = 0;
+
+	/*
+	 * De-assert reinit if the IO scan chain is intended for HIO. In
+	 * this, its the chain 3.
+	 */
+	if (io_scan_chain_id == 3)
+		clrbits_le32(&freeze_controller_base->hioctrl,
+			     SYSMGR_FRZCTRL_HIOCTRL_DLLRST_MASK);
+
+	/*
+	 * Check if the scan chain engine is inactive and the
+	 * WFIFO is empty before enabling the IO scan chain
+	 */
+	if (!scan_chain_engine_is_idle(SCAN_MAX_DELAY))
+		return 1;
+
+	/*
+	 * Enable IO Scan chain based on scan chain id
+	 * Note: only one chain can be enabled at a time
+	 */
+	setbits_le32(&scan_manager_base->en, 1 << io_scan_chain_id);
+
+	/*
+	 * Calculate number of iteration needed for full 128-bit (4 x32-bits)
+	 * bits shifting. Each TDI_TDO packet can shift in maximum 128-bits
+	 */
+	io_program_iter	= io_scan_chain_len_in_bits >>
+		IO_SCAN_CHAIN_128BIT_SHIFT;
+	io_scan_chain_data_residual = io_scan_chain_len_in_bits &
+		IO_SCAN_CHAIN_128BIT_MASK;
+
+	/* Construct TDI_TDO packet for 128-bit IO scan chain (2 bytes) */
+	tdi_tdo_header = TDI_TDO_HEADER_FIRST_BYTE |
+		(TDI_TDO_MAX_PAYLOAD <<	TDI_TDO_HEADER_SECOND_BYTE_SHIFT);
+
+	/* Program IO scan chain in 128-bit iteration */
+	for (i = 0; i < io_program_iter; i++) {
+		/* write TDI_TDO packet header to scan manager */
+		writel(tdi_tdo_header,	&scan_manager_base->fifo_double_byte);
+
+		/* calculate array index. Multiply by 4 as write 4 x 32bits */
+		index = i * 4;
+
+		/* write 4 successive 32-bit IO scan chain data into WFIFO */
+		writel(iocsr_scan_chain[index],
+		       &scan_manager_base->fifo_quad_byte);
+		writel(iocsr_scan_chain[index + 1],
+		       &scan_manager_base->fifo_quad_byte);
+		writel(iocsr_scan_chain[index + 2],
+		       &scan_manager_base->fifo_quad_byte);
+		writel(iocsr_scan_chain[index + 3],
+		       &scan_manager_base->fifo_quad_byte);
+
+		/*
+		 * Check if the scan chain engine has completed the
+		 * IO scan chain data shifting
+		 */
+		if (!scan_chain_engine_is_idle(SCAN_MAX_DELAY))
+			goto error;
+	}
+
+	/* Calculate array index for final TDI_TDO packet */
+	index = io_program_iter * 4;
+
+	/* Final TDI_TDO packet if any */
+	if (io_scan_chain_data_residual) {
+		/*
+		 * Calculate number of quad bytes FIFO write
+		 * needed for the final TDI_TDO packet
+		 */
+		io_program_iter	= io_scan_chain_data_residual >>
+			IO_SCAN_CHAIN_32BIT_SHIFT;
+
+		/*
+		 * Construct TDI_TDO packet for remaining IO
+		 * scan chain (2 bytes)
+		 */
+		tdi_tdo_header	= TDI_TDO_HEADER_FIRST_BYTE |
+			((io_scan_chain_data_residual - 1) <<
+			TDI_TDO_HEADER_SECOND_BYTE_SHIFT);
+
+		/*
+		 * Program the last part of IO scan chain write TDI_TDO packet
+		 * header (2 bytes) to scan manager
+		 */
+		writel(tdi_tdo_header, &scan_manager_base->fifo_double_byte);
+
+		for (i = 0; i < io_program_iter; i++) {
+			/*
+			 * write remaining scan chain data into scan
+			 * manager WFIFO with 4 bytes write
+			*/
+			writel(iocsr_scan_chain[index + i],
+			       &scan_manager_base->fifo_quad_byte);
+		}
+
+		index += io_program_iter;
+		residual = io_scan_chain_data_residual &
+			IO_SCAN_CHAIN_32BIT_MASK;
+
+		if (IO_SCAN_CHAIN_PAYLOAD_24BIT < residual) {
+			/*
+			 * write the last 4B scan chain data
+			 * into scan manager WFIFO
+			 */
+			writel(iocsr_scan_chain[index],
+			       &scan_manager_base->fifo_quad_byte);
+		} else {
+			/*
+			 * write the remaining 1 - 3 bytes scan chain
+			 * data into scan manager WFIFO byte by byte
+			 * to prevent JTAG engine shifting unused data
+			 * from the FIFO and mistaken the data as a
+			 * valid command (even though unused bits are
+			 * set to 0, but just to prevent hardware
+			 * glitch)
+			 */
+			for (i = 0; i < residual; i += 8) {
+				writel(((iocsr_scan_chain[index] >> i)
+					& IO_SCAN_CHAIN_BYTE_MASK),
+					&scan_manager_base->fifo_single_byte);
+			}
+		}
+
+		/*
+		 * Check if the scan chain engine has completed the
+		 * IO scan chain data shifting
+		 */
+		if (!scan_chain_engine_is_idle(SCAN_MAX_DELAY))
+			goto error;
+	}
+
+	/* Disable IO Scan chain when configuration done*/
+	clrbits_le32(&scan_manager_base->en, 1 << io_scan_chain_id);
+	return 0;
+
+error:
+	/* Disable IO Scan chain when error detected */
+	clrbits_le32(&scan_manager_base->en, 1 << io_scan_chain_id);
+	return 1;
+}
+
+int scan_mgr_configure_iocsr(void)
+{
+	int status = 0;
+
+	/* configure the IOCSR through scan chain */
+	status |= scan_mgr_io_scan_chain_prg(0,
+		CONFIG_HPS_IOCSR_SCANCHAIN0_LENGTH, iocsr_scan_chain0_table);
+	status |= scan_mgr_io_scan_chain_prg(1,
+		CONFIG_HPS_IOCSR_SCANCHAIN1_LENGTH, iocsr_scan_chain1_table);
+	status |= scan_mgr_io_scan_chain_prg(2,
+		CONFIG_HPS_IOCSR_SCANCHAIN2_LENGTH, iocsr_scan_chain2_table);
+	status |= scan_mgr_io_scan_chain_prg(3,
+		CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH, iocsr_scan_chain3_table);
+	return status;
+}