ARM: UniPhier: move SoC sources to mach-uniphier

Move
arch/arm/cpu/armv7/uniphier/* -> arch/arm/mach-uniphier/*

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>

1 files changed, 0 insertions, 168 deletions

diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/pll_init.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/pll_init.c
deleted file mode 100644
index 1db90f88a0..0000000000
--- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/pll_init.c
+++ /dev/null
@@ -1,168 +0,0 @@
-/*
- * Copyright (C) 2011-2014 Panasonic Corporation
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/sc-regs.h>
-#include <asm/arch/sg-regs.h>
-
-#undef DPLL_SSC_RATE_1PER
-
-static void dpll_init(void)
-{
-	u32 tmp;
-
-	/*
-	 * Set Frequency
-	 * Set 0xc(1600MHz)/0xd(1333MHz)/0xe(1066MHz)
-	 * to FOUT ( DPLLCTRL.bit[29:20] )
-	 */
-	tmp = readl(SC_DPLLCTRL);
-	tmp &= ~(0x000f0000);
-#if CONFIG_DDR_FREQ == 1600
-	tmp |= 0x000c0000;
-#elif CONFIG_DDR_FREQ == 1333
-	tmp |= 0x000d0000;
-#else
-# error "Unsupported frequency"
-#endif
-
-	/*
-	 * Set Moduration rate
-	 * Set 0x0(1%)/0x1(2%) to SSC_RATE(DPLLCTRL.bit[15])
-	 */
-#if defined(DPLL_SSC_RATE_1PER)
-	tmp &= ~0x00008000;
-#else
-	tmp |= 0x00008000;
-#endif
-	writel(tmp, SC_DPLLCTRL);
-
-	tmp = readl(SC_DPLLCTRL2);
-	tmp |= SC_DPLLCTRL2_NRSTDS;
-	writel(tmp, SC_DPLLCTRL2);
-}
-
-static void stop_mpll(void)
-{
-	u32 tmp;
-
-	tmp = readl(SC_MPLLOSCCTL);
-
-	if (!(tmp & SC_MPLLOSCCTL_MPLLST))
-		return; /* already stopped */
-
-	tmp &= ~SC_MPLLOSCCTL_MPLLEN;
-	writel(tmp, SC_MPLLOSCCTL);
-
-	while (readl(SC_MPLLOSCCTL) & SC_MPLLOSCCTL_MPLLST)
-		;
-}
-
-static void vpll_init(void)
-{
-	u32 tmp, clk_mode_axosel;
-
-	/* Set VPLL27A &  VPLL27B */
-	tmp = readl(SG_PINMON0);
-	clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK;
-
-#if defined(CONFIG_MACH_PH1_PRO4)
-	/* 25MHz or 6.25MHz is default for Pro4R, no need to set VPLLA/B */
-	if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ ||
-	    clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_6250KHZ)
-		return;
-#endif
-
-	/* Disable write protect of VPLL27ACTRL[2-7]*, VPLL27BCTRL[2-8] */
-	tmp = readl(SC_VPLL27ACTRL);
-	tmp |= 0x00000001;
-	writel(tmp, SC_VPLL27ACTRL);
-	tmp = readl(SC_VPLL27BCTRL);
-	tmp |= 0x00000001;
-	writel(tmp, SC_VPLL27BCTRL);
-
-	/* Unset VPLA_K_LD and VPLB_K_LD bit */
-	tmp = readl(SC_VPLL27ACTRL3);
-	tmp &= ~0x10000000;
-	writel(tmp, SC_VPLL27ACTRL3);
-	tmp = readl(SC_VPLL27BCTRL3);
-	tmp &= ~0x10000000;
-	writel(tmp, SC_VPLL27BCTRL3);
-
-	/* Set VPLA_M and VPLB_M to 0x20 */
-	tmp = readl(SC_VPLL27ACTRL2);
-	tmp &= ~0x0000007f;
-	tmp |= 0x00000020;
-	writel(tmp, SC_VPLL27ACTRL2);
-	tmp = readl(SC_VPLL27BCTRL2);
-	tmp &= ~0x0000007f;
-	tmp |= 0x00000020;
-	writel(tmp, SC_VPLL27BCTRL2);
-
-	if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ ||
-	    clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_6250KHZ) {
-		/* Set VPLA_K and VPLB_K for AXO: 25MHz */
-		tmp = readl(SC_VPLL27ACTRL3);
-		tmp &= ~0x000fffff;
-		tmp |= 0x00066666;
-		writel(tmp, SC_VPLL27ACTRL3);
-		tmp = readl(SC_VPLL27BCTRL3);
-		tmp &= ~0x000fffff;
-		tmp |= 0x00066666;
-		writel(tmp, SC_VPLL27BCTRL3);
-	} else {
-		/* Set VPLA_K and VPLB_K for AXO: 24.576 MHz */
-		tmp = readl(SC_VPLL27ACTRL3);
-		tmp &= ~0x000fffff;
-		tmp |= 0x000f5800;
-		writel(tmp, SC_VPLL27ACTRL3);
-		tmp = readl(SC_VPLL27BCTRL3);
-		tmp &= ~0x000fffff;
-		tmp |= 0x000f5800;
-		writel(tmp, SC_VPLL27BCTRL3);
-	}
-
-	/* wait 1 usec */
-	udelay(1);
-
-	/* Set VPLA_K_LD and VPLB_K_LD to load K parameters */
-	tmp = readl(SC_VPLL27ACTRL3);
-	tmp |= 0x10000000;
-	writel(tmp, SC_VPLL27ACTRL3);
-	tmp = readl(SC_VPLL27BCTRL3);
-	tmp |= 0x10000000;
-	writel(tmp, SC_VPLL27BCTRL3);
-
-	/* Unset VPLA_SNRST and VPLB_SNRST bit */
-	tmp = readl(SC_VPLL27ACTRL2);
-	tmp |= 0x10000000;
-	writel(tmp, SC_VPLL27ACTRL2);
-	tmp = readl(SC_VPLL27BCTRL2);
-	tmp |= 0x10000000;
-	writel(tmp, SC_VPLL27BCTRL2);
-
-	/* Enable write protect of VPLL27ACTRL[2-7]*, VPLL27BCTRL[2-8] */
-	tmp = readl(SC_VPLL27ACTRL);
-	tmp &= ~0x00000001;
-	writel(tmp, SC_VPLL27ACTRL);
-	tmp = readl(SC_VPLL27BCTRL);
-	tmp &= ~0x00000001;
-	writel(tmp, SC_VPLL27BCTRL);
-}
-
-void pll_init(void)
-{
-	dpll_init();
-	stop_mpll();
-	vpll_init();
-
-	/*
-	 * Wait 500 usec until dpll get stable
-	 * We wait 1 usec in vpll_init() so 1 usec can be saved here.
-	 */
-	udelay(499);
-}