ARM: zynq: move SoC sources to mach-zynq

Move arch/arm/cpu/armv7/zynq/* -> arch/arm/mach-zynq/*

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

11 files changed, 0 insertions, 1496 deletions

diff --git a/arch/arm/cpu/armv7/zynq/Kconfig b/arch/arm/cpu/armv7/zynq/Kconfig
deleted file mode 100644
index 26e570eb66..0000000000
--- a/arch/arm/cpu/armv7/zynq/Kconfig
+++ /dev/null
@@ -1,43 +0,0 @@
-if ZYNQ
-
-choice
-	prompt "Xilinx Zynq board select"
-
-config TARGET_ZYNQ_ZED
-	bool "Zynq ZedBoard"
-
-config TARGET_ZYNQ_MICROZED
-	bool "Zynq MicroZed"
-
-config TARGET_ZYNQ_PICOZED
-	bool "Zynq PicoZed"
-
-config TARGET_ZYNQ_ZC70X
-	bool "Zynq ZC702/ZC706 Board"
-
-config TARGET_ZYNQ_ZC770
-	bool "Zynq ZC770 Board"
-
-config TARGET_ZYNQ_ZYBO
-	bool "Zynq Zybo Board"
-
-endchoice
-
-config SYS_BOARD
-	default "zynq"
-
-config SYS_VENDOR
-	default "xilinx"
-
-config SYS_SOC
-	default "zynq"
-
-config SYS_CONFIG_NAME
-	default "zynq_zed" if TARGET_ZYNQ_ZED
-	default "zynq_microzed" if TARGET_ZYNQ_MICROZED
-	default "zynq_picozed" if TARGET_ZYNQ_PICOZED
-	default "zynq_zc70x" if TARGET_ZYNQ_ZC70X
-	default "zynq_zc770" if TARGET_ZYNQ_ZC770
-	default "zynq_zybo" if TARGET_ZYNQ_ZYBO
-
-endif
diff --git a/arch/arm/cpu/armv7/zynq/Makefile b/arch/arm/cpu/armv7/zynq/Makefile
deleted file mode 100644
index bf29b4d396..0000000000
--- a/arch/arm/cpu/armv7/zynq/Makefile
+++ /dev/null
@@ -1,18 +0,0 @@
-#
-# (C) Copyright 2000-2003
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# (C) Copyright 2008
-# Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= timer.o
-obj-y	+= cpu.o
-obj-y	+= ddrc.o
-obj-y	+= slcr.o
-obj-y	+= clk.o
-obj-y	+= lowlevel_init.o
-AFLAGS_lowlevel_init.o := -mfpu=neon
-obj-$(CONFIG_SPL_BUILD)	+= spl.o
diff --git a/arch/arm/cpu/armv7/zynq/clk.c b/arch/arm/cpu/armv7/zynq/clk.c
deleted file mode 100644
index d2885dc2b9..0000000000
--- a/arch/arm/cpu/armv7/zynq/clk.c
+++ /dev/null
@@ -1,664 +0,0 @@
-/*
- * Copyright (C) 2013 Soren Brinkmann <soren.brinkmann@xilinx.com>
- * Copyright (C) 2013 Xilinx, Inc. All rights reserved.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-#include <common.h>
-#include <errno.h>
-#include <clk.h>
-#include <asm/io.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/clk.h>
-
-/* Board oscillator frequency */
-#ifndef CONFIG_ZYNQ_PS_CLK_FREQ
-# define CONFIG_ZYNQ_PS_CLK_FREQ	33333333UL
-#endif
-
-/* Register bitfield defines */
-#define PLLCTRL_FBDIV_MASK	0x7f000
-#define PLLCTRL_FBDIV_SHIFT	12
-#define PLLCTRL_BPFORCE_MASK	(1 << 4)
-#define PLLCTRL_PWRDWN_MASK	2
-#define PLLCTRL_PWRDWN_SHIFT	1
-#define PLLCTRL_RESET_MASK	1
-#define PLLCTRL_RESET_SHIFT	0
-
-#define ZYNQ_CLK_MAXDIV		0x3f
-#define CLK_CTRL_DIV1_SHIFT	20
-#define CLK_CTRL_DIV1_MASK	(ZYNQ_CLK_MAXDIV << CLK_CTRL_DIV1_SHIFT)
-#define CLK_CTRL_DIV0_SHIFT	8
-#define CLK_CTRL_DIV0_MASK	(ZYNQ_CLK_MAXDIV << CLK_CTRL_DIV0_SHIFT)
-#define CLK_CTRL_SRCSEL_SHIFT	4
-#define CLK_CTRL_SRCSEL_MASK	(0x3 << CLK_CTRL_SRCSEL_SHIFT)
-
-#define CLK_CTRL_DIV2X_SHIFT	26
-#define CLK_CTRL_DIV2X_MASK	(ZYNQ_CLK_MAXDIV << CLK_CTRL_DIV2X_SHIFT)
-#define CLK_CTRL_DIV3X_SHIFT	20
-#define CLK_CTRL_DIV3X_MASK	(ZYNQ_CLK_MAXDIV << CLK_CTRL_DIV3X_SHIFT)
-
-#define ZYNQ_CLKMUX_SEL_0	0
-#define ZYNQ_CLKMUX_SEL_1	1
-#define ZYNQ_CLKMUX_SEL_2	2
-#define ZYNQ_CLKMUX_SEL_3	3
-
-DECLARE_GLOBAL_DATA_PTR;
-
-struct clk;
-
-/**
- * struct clk_ops:
- * @set_rate:	Function pointer to set_rate() implementation
- * @get_rate:	Function pointer to get_rate() implementation
- */
-struct clk_ops {
-	int (*set_rate)(struct clk *clk, unsigned long rate);
-	unsigned long (*get_rate)(struct clk *clk);
-};
-
-/**
- * struct clk:
- * @name:	Clock name
- * @frequency:	Currenct frequency
- * @parent:	Parent clock
- * @flags:	Clock flags
- * @reg:	Clock control register
- * @ops:	Clock operations
- */
-struct clk {
-	char		*name;
-	unsigned long	frequency;
-	enum zynq_clk	parent;
-	unsigned int	flags;
-	u32		*reg;
-	struct clk_ops	ops;
-};
-#define ZYNQ_CLK_FLAGS_HAS_2_DIVS	1
-
-static struct clk clks[clk_max];
-
-/**
- * __zynq_clk_cpu_get_parent() - Decode clock multiplexer
- * @srcsel:	Mux select value
- * Returns the clock identifier associated with the selected mux input.
- */
-static int __zynq_clk_cpu_get_parent(unsigned int srcsel)
-{
-	unsigned int ret;
-
-	switch (srcsel) {
-	case ZYNQ_CLKMUX_SEL_0:
-	case ZYNQ_CLKMUX_SEL_1:
-		ret = armpll_clk;
-		break;
-	case ZYNQ_CLKMUX_SEL_2:
-		ret = ddrpll_clk;
-		break;
-	case ZYNQ_CLKMUX_SEL_3:
-		ret = iopll_clk;
-		break;
-	default:
-		ret = armpll_clk;
-		break;
-	}
-
-	return ret;
-}
-
-/**
- * ddr2x_get_rate() - Get clock rate of DDR2x clock
- * @clk:	Clock handle
- * Returns the current clock rate of @clk.
- */
-static unsigned long ddr2x_get_rate(struct clk *clk)
-{
-	u32 clk_ctrl = readl(clk->reg);
-	u32 div = (clk_ctrl & CLK_CTRL_DIV2X_MASK) >> CLK_CTRL_DIV2X_SHIFT;
-
-	return DIV_ROUND_CLOSEST(zynq_clk_get_rate(clk->parent), div);
-}
-
-/**
- * ddr3x_get_rate() - Get clock rate of DDR3x clock
- * @clk:	Clock handle
- * Returns the current clock rate of @clk.
- */
-static unsigned long ddr3x_get_rate(struct clk *clk)
-{
-	u32 clk_ctrl = readl(clk->reg);
-	u32 div = (clk_ctrl & CLK_CTRL_DIV3X_MASK) >> CLK_CTRL_DIV3X_SHIFT;
-
-	return DIV_ROUND_CLOSEST(zynq_clk_get_rate(clk->parent), div);
-}
-
-static void init_ddr_clocks(void)
-{
-	u32 div0, div1;
-	unsigned long prate = zynq_clk_get_rate(ddrpll_clk);
-	u32 clk_ctrl = readl(&slcr_base->ddr_clk_ctrl);
-
-	/* DDR2x */
-	clks[ddr2x_clk].reg = &slcr_base->ddr_clk_ctrl;
-	clks[ddr2x_clk].parent = ddrpll_clk;
-	clks[ddr2x_clk].name = "ddr_2x";
-	clks[ddr2x_clk].frequency = ddr2x_get_rate(&clks[ddr2x_clk]);
-	clks[ddr2x_clk].ops.get_rate = ddr2x_get_rate;
-
-	/* DDR3x */
-	clks[ddr3x_clk].reg = &slcr_base->ddr_clk_ctrl;
-	clks[ddr3x_clk].parent = ddrpll_clk;
-	clks[ddr3x_clk].name = "ddr_3x";
-	clks[ddr3x_clk].frequency = ddr3x_get_rate(&clks[ddr3x_clk]);
-	clks[ddr3x_clk].ops.get_rate = ddr3x_get_rate;
-
-	/* DCI */
-	clk_ctrl = readl(&slcr_base->dci_clk_ctrl);
-	div0 = (clk_ctrl & CLK_CTRL_DIV0_MASK) >> CLK_CTRL_DIV0_SHIFT;
-	div1 = (clk_ctrl & CLK_CTRL_DIV1_MASK) >> CLK_CTRL_DIV1_SHIFT;
-	clks[dci_clk].reg = &slcr_base->dci_clk_ctrl;
-	clks[dci_clk].parent = ddrpll_clk;
-	clks[dci_clk].frequency = DIV_ROUND_CLOSEST(
-			DIV_ROUND_CLOSEST(prate, div0), div1);
-	clks[dci_clk].name = "dci";
-
-	gd->bd->bi_ddr_freq = clks[ddr3x_clk].frequency / 1000000;
-}
-
-static void init_cpu_clocks(void)
-{
-	int clk_621;
-	u32 reg, div, srcsel;
-	enum zynq_clk parent;
-
-	reg = readl(&slcr_base->arm_clk_ctrl);
-	clk_621 = readl(&slcr_base->clk_621_true) & 1;
-	div = (reg & CLK_CTRL_DIV0_MASK) >> CLK_CTRL_DIV0_SHIFT;
-	srcsel = (reg & CLK_CTRL_SRCSEL_MASK) >> CLK_CTRL_SRCSEL_SHIFT;
-	parent = __zynq_clk_cpu_get_parent(srcsel);
-
-	/* cpu clocks */
-	clks[cpu_6or4x_clk].reg = &slcr_base->arm_clk_ctrl;
-	clks[cpu_6or4x_clk].parent = parent;
-	clks[cpu_6or4x_clk].frequency = DIV_ROUND_CLOSEST(
-			zynq_clk_get_rate(parent), div);
-	clks[cpu_6or4x_clk].name = "cpu_6or4x";
-
-	clks[cpu_3or2x_clk].reg = &slcr_base->arm_clk_ctrl;
-	clks[cpu_3or2x_clk].parent = cpu_6or4x_clk;
-	clks[cpu_3or2x_clk].frequency = zynq_clk_get_rate(cpu_6or4x_clk) / 2;
-	clks[cpu_3or2x_clk].name = "cpu_3or2x";
-
-	clks[cpu_2x_clk].reg = &slcr_base->arm_clk_ctrl;
-	clks[cpu_2x_clk].parent = cpu_6or4x_clk;
-	clks[cpu_2x_clk].frequency = zynq_clk_get_rate(cpu_6or4x_clk) /
-			(2 + clk_621);
-	clks[cpu_2x_clk].name = "cpu_2x";
-
-	clks[cpu_1x_clk].reg = &slcr_base->arm_clk_ctrl;
-	clks[cpu_1x_clk].parent = cpu_6or4x_clk;
-	clks[cpu_1x_clk].frequency = zynq_clk_get_rate(cpu_6or4x_clk) /
-			(4 + 2 * clk_621);
-	clks[cpu_1x_clk].name = "cpu_1x";
-}
-
-/**
- * periph_calc_two_divs() - Calculate clock dividers
- * @cur_rate:	Current clock rate
- * @tgt_rate:	Target clock rate
- * @prate:	Parent clock rate
- * @div0:	First divider (output)
- * @div1:	Second divider (output)
- * Returns the actual clock rate possible.
- *
- * Calculates clock dividers for clocks with two 6-bit dividers.
- */
-static unsigned long periph_calc_two_divs(unsigned long cur_rate,
-		unsigned long tgt_rate, unsigned long prate, u32 *div0,
-		u32 *div1)
-{
-	long err, best_err = (long)(~0UL >> 1);
-	unsigned long rate, best_rate = 0;
-	u32 d0, d1;
-
-	for (d0 = 1; d0 <= ZYNQ_CLK_MAXDIV; d0++) {
-		for (d1 = 1; d1 <= ZYNQ_CLK_MAXDIV >> 1; d1++) {
-			rate = DIV_ROUND_CLOSEST(DIV_ROUND_CLOSEST(prate, d0),
-					d1);
-			err = abs(rate - tgt_rate);
-
-			if (err < best_err) {
-				*div0 = d0;
-				*div1 = d1;
-				best_err = err;
-				best_rate = rate;
-			}
-		}
-	}
-
-	return best_rate;
-}
-
-/**
- * zynq_clk_periph_set_rate() - Set clock rate
- * @clk:	Handle of the peripheral clock
- * @rate:	New clock rate
- * Sets the clock frequency of @clk to @rate. Returns zero on success.
- */
-static int zynq_clk_periph_set_rate(struct clk *clk,
-		unsigned long rate)
-{
-	u32 ctrl, div0 = 0, div1 = 0;
-	unsigned long prate, new_rate, cur_rate = clk->frequency;
-
-	ctrl = readl(clk->reg);
-	prate = zynq_clk_get_rate(clk->parent);
-	ctrl &= ~CLK_CTRL_DIV0_MASK;
-
-	if (clk->flags & ZYNQ_CLK_FLAGS_HAS_2_DIVS) {
-		ctrl &= ~CLK_CTRL_DIV1_MASK;
-		new_rate = periph_calc_two_divs(cur_rate, rate, prate, &div0,
-				&div1);
-		ctrl |= div1 << CLK_CTRL_DIV1_SHIFT;
-	} else {
-		div0 = DIV_ROUND_CLOSEST(prate, rate);
-		div0 &= ZYNQ_CLK_MAXDIV;
-		new_rate = DIV_ROUND_CLOSEST(rate, div0);
-	}
-
-	/* write new divs to hardware */
-	ctrl |= div0 << CLK_CTRL_DIV0_SHIFT;
-	writel(ctrl, clk->reg);
-
-	/* update frequency in clk framework */
-	clk->frequency = new_rate;
-
-	return 0;
-}
-
-/**
- * zynq_clk_periph_get_rate() - Get clock rate
- * @clk:	Handle of the peripheral clock
- * Returns the current clock rate of @clk.
- */
-static unsigned long zynq_clk_periph_get_rate(struct clk *clk)
-{
-	u32 clk_ctrl = readl(clk->reg);
-	u32 div0 = (clk_ctrl & CLK_CTRL_DIV0_MASK) >> CLK_CTRL_DIV0_SHIFT;
-	u32 div1 = 1;
-
-	if (clk->flags & ZYNQ_CLK_FLAGS_HAS_2_DIVS)
-		div1 = (clk_ctrl & CLK_CTRL_DIV1_MASK) >> CLK_CTRL_DIV1_SHIFT;
-
-	/* a register value of zero == division by 1 */
-	if (!div0)
-		div0 = 1;
-	if (!div1)
-		div1 = 1;
-
-	return
-		DIV_ROUND_CLOSEST(
-			DIV_ROUND_CLOSEST(zynq_clk_get_rate(clk->parent), div0),
-			div1);
-}
-
-/**
- * __zynq_clk_periph_get_parent() - Decode clock multiplexer
- * @srcsel:	Mux select value
- * Returns the clock identifier associated with the selected mux input.
- */
-static enum zynq_clk __zynq_clk_periph_get_parent(u32 srcsel)
-{
-	switch (srcsel) {
-	case ZYNQ_CLKMUX_SEL_0:
-	case ZYNQ_CLKMUX_SEL_1:
-		return iopll_clk;
-	case ZYNQ_CLKMUX_SEL_2:
-		return armpll_clk;
-	case ZYNQ_CLKMUX_SEL_3:
-		return ddrpll_clk;
-	default:
-		return 0;
-	}
-}
-
-/**
- * zynq_clk_periph_get_parent() - Decode clock multiplexer
- * @clk:	Clock handle
- * Returns the clock identifier associated with the selected mux input.
- */
-static enum zynq_clk zynq_clk_periph_get_parent(struct clk *clk)
-{
-	u32 clk_ctrl = readl(clk->reg);
-	u32 srcsel = (clk_ctrl & CLK_CTRL_SRCSEL_MASK) >> CLK_CTRL_SRCSEL_SHIFT;
-
-	return __zynq_clk_periph_get_parent(srcsel);
-}
-
-/**
- * zynq_clk_register_periph_clk() - Set up a peripheral clock with the framework
- * @clk:	Pointer to struct clk for the clock
- * @ctrl:	Clock control register
- * @name:	PLL name
- * @two_divs:	Indicates whether the clock features one or two dividers
- */
-static int zynq_clk_register_periph_clk(struct clk *clk, u32 *ctrl, char *name,
-		bool two_divs)
-{
-	clk->name = name;
-	clk->reg = ctrl;
-	if (two_divs)
-		clk->flags = ZYNQ_CLK_FLAGS_HAS_2_DIVS;
-	clk->parent = zynq_clk_periph_get_parent(clk);
-	clk->frequency = zynq_clk_periph_get_rate(clk);
-	clk->ops.get_rate = zynq_clk_periph_get_rate;
-	clk->ops.set_rate = zynq_clk_periph_set_rate;
-
-	return 0;
-}
-
-static void init_periph_clocks(void)
-{
-	zynq_clk_register_periph_clk(&clks[gem0_clk], &slcr_base->gem0_clk_ctrl,
-				     "gem0", 1);
-	zynq_clk_register_periph_clk(&clks[gem1_clk], &slcr_base->gem1_clk_ctrl,
-				     "gem1", 1);
-
-	zynq_clk_register_periph_clk(&clks[smc_clk], &slcr_base->smc_clk_ctrl,
-				     "smc", 0);
-
-	zynq_clk_register_periph_clk(&clks[lqspi_clk],
-				     &slcr_base->lqspi_clk_ctrl, "lqspi", 0);
-
-	zynq_clk_register_periph_clk(&clks[sdio0_clk],
-				     &slcr_base->sdio_clk_ctrl, "sdio0", 0);
-	zynq_clk_register_periph_clk(&clks[sdio1_clk],
-				     &slcr_base->sdio_clk_ctrl, "sdio1", 0);
-
-	zynq_clk_register_periph_clk(&clks[spi0_clk], &slcr_base->spi_clk_ctrl,
-				     "spi0", 0);
-	zynq_clk_register_periph_clk(&clks[spi1_clk], &slcr_base->spi_clk_ctrl,
-				     "spi1", 0);
-
-	zynq_clk_register_periph_clk(&clks[uart0_clk],
-				     &slcr_base->uart_clk_ctrl, "uart0", 0);
-	zynq_clk_register_periph_clk(&clks[uart1_clk],
-				     &slcr_base->uart_clk_ctrl, "uart1", 0);
-
-	zynq_clk_register_periph_clk(&clks[dbg_trc_clk],
-				     &slcr_base->dbg_clk_ctrl, "dbg_trc", 0);
-	zynq_clk_register_periph_clk(&clks[dbg_apb_clk],
-				     &slcr_base->dbg_clk_ctrl, "dbg_apb", 0);
-
-	zynq_clk_register_periph_clk(&clks[pcap_clk],
-				     &slcr_base->pcap_clk_ctrl, "pcap", 0);
-
-	zynq_clk_register_periph_clk(&clks[fclk0_clk],
-				     &slcr_base->fpga0_clk_ctrl, "fclk0", 1);
-	zynq_clk_register_periph_clk(&clks[fclk1_clk],
-				     &slcr_base->fpga1_clk_ctrl, "fclk1", 1);
-	zynq_clk_register_periph_clk(&clks[fclk2_clk],
-				     &slcr_base->fpga2_clk_ctrl, "fclk2", 1);
-	zynq_clk_register_periph_clk(&clks[fclk3_clk],
-				     &slcr_base->fpga3_clk_ctrl, "fclk3", 1);
-}
-
-/**
- * zynq_clk_register_aper_clk() - Set up a APER clock with the framework
- * @clk:	Pointer to struct clk for the clock
- * @ctrl:	Clock control register
- * @name:	PLL name
- */
-static void zynq_clk_register_aper_clk(struct clk *clk, u32 *ctrl, char *name)
-{
-	clk->name = name;
-	clk->reg = ctrl;
-	clk->parent = cpu_1x_clk;
-	clk->frequency = zynq_clk_get_rate(clk->parent);
-}
-
-static void init_aper_clocks(void)
-{
-	zynq_clk_register_aper_clk(&clks[usb0_aper_clk],
-				   &slcr_base->aper_clk_ctrl, "usb0_aper");
-	zynq_clk_register_aper_clk(&clks[usb1_aper_clk],
-				   &slcr_base->aper_clk_ctrl, "usb1_aper");
-
-	zynq_clk_register_aper_clk(&clks[gem0_aper_clk],
-				   &slcr_base->aper_clk_ctrl, "gem0_aper");
-	zynq_clk_register_aper_clk(&clks[gem1_aper_clk],
-				   &slcr_base->aper_clk_ctrl, "gem1_aper");
-
-	zynq_clk_register_aper_clk(&clks[sdio0_aper_clk],
-				   &slcr_base->aper_clk_ctrl, "sdio0_aper");
-	zynq_clk_register_aper_clk(&clks[sdio1_aper_clk],
-				   &slcr_base->aper_clk_ctrl, "sdio1_aper");
-
-	zynq_clk_register_aper_clk(&clks[spi0_aper_clk],
-				   &slcr_base->aper_clk_ctrl, "spi0_aper");
-	zynq_clk_register_aper_clk(&clks[spi1_aper_clk],
-				   &slcr_base->aper_clk_ctrl, "spi1_aper");
-
-	zynq_clk_register_aper_clk(&clks[can0_aper_clk],
-				   &slcr_base->aper_clk_ctrl, "can0_aper");
-	zynq_clk_register_aper_clk(&clks[can1_aper_clk],
-				   &slcr_base->aper_clk_ctrl, "can1_aper");
-
-	zynq_clk_register_aper_clk(&clks[i2c0_aper_clk],
-				   &slcr_base->aper_clk_ctrl, "i2c0_aper");
-	zynq_clk_register_aper_clk(&clks[i2c1_aper_clk],
-				   &slcr_base->aper_clk_ctrl, "i2c1_aper");
-
-	zynq_clk_register_aper_clk(&clks[uart0_aper_clk],
-				   &slcr_base->aper_clk_ctrl, "uart0_aper");
-	zynq_clk_register_aper_clk(&clks[uart1_aper_clk],
-				   &slcr_base->aper_clk_ctrl, "uart1_aper");
-
-	zynq_clk_register_aper_clk(&clks[gpio_aper_clk],
-				   &slcr_base->aper_clk_ctrl, "gpio_aper");
-
-	zynq_clk_register_aper_clk(&clks[lqspi_aper_clk],
-				   &slcr_base->aper_clk_ctrl, "lqspi_aper");
-
-	zynq_clk_register_aper_clk(&clks[smc_aper_clk],
-				   &slcr_base->aper_clk_ctrl, "smc_aper");
-}
-
-/**
- * __zynq_clk_pll_get_rate() - Get PLL rate
- * @addr:	Address of the PLL's control register
- * Returns the current PLL output rate.
- */
-static unsigned long __zynq_clk_pll_get_rate(u32 *addr)
-{
-	u32 reg, mul, bypass;
-
-	reg = readl(addr);
-	bypass = reg & PLLCTRL_BPFORCE_MASK;
-	if (bypass)
-		mul = 1;
-	else
-		mul = (reg & PLLCTRL_FBDIV_MASK) >> PLLCTRL_FBDIV_SHIFT;
-
-	return CONFIG_ZYNQ_PS_CLK_FREQ * mul;
-}
-
-/**
- * zynq_clk_pll_get_rate() - Get PLL rate
- * @pll:	Handle of the PLL
- * Returns the current clock rate of @pll.
- */
-static unsigned long zynq_clk_pll_get_rate(struct clk *pll)
-{
-	return __zynq_clk_pll_get_rate(pll->reg);
-}
-
-/**
- * zynq_clk_register_pll() - Set up a PLL with the framework
- * @clk:	Pointer to struct clk for the PLL
- * @ctrl:	PLL control register
- * @name:	PLL name
- * @prate:	PLL input clock rate
- */
-static void zynq_clk_register_pll(struct clk *clk, u32 *ctrl, char *name,
-		unsigned long prate)
-{
-	clk->name = name;
-	clk->reg = ctrl;
-	clk->frequency = zynq_clk_pll_get_rate(clk);
-	clk->ops.get_rate = zynq_clk_pll_get_rate;
-}
-
-/**
- * clkid_2_register() - Get clock control register
- * @id:	Clock identifier of one of the PLLs
- * Returns the address of the requested PLL's control register.
- */
-static u32 *clkid_2_register(enum zynq_clk id)
-{
-	switch (id) {
-	case armpll_clk:
-		return &slcr_base->arm_pll_ctrl;
-	case ddrpll_clk:
-		return &slcr_base->ddr_pll_ctrl;
-	case iopll_clk:
-		return &slcr_base->io_pll_ctrl;
-	default:
-		return &slcr_base->io_pll_ctrl;
-	}
-}
-
-/* API */
-/**
- * zynq_clk_early_init() - Early init for the clock framework
- *
- * This function is called from before relocation and sets up the CPU clock
- * frequency in the global data struct.
- */
-void zynq_clk_early_init(void)
-{
-	u32 reg = readl(&slcr_base->arm_clk_ctrl);
-	u32 div = (reg & CLK_CTRL_DIV0_MASK) >> CLK_CTRL_DIV0_SHIFT;
-	u32 srcsel = (reg & CLK_CTRL_SRCSEL_MASK) >> CLK_CTRL_SRCSEL_SHIFT;
-	enum zynq_clk parent = __zynq_clk_cpu_get_parent(srcsel);
-	u32 *pllreg = clkid_2_register(parent);
-	unsigned long prate = __zynq_clk_pll_get_rate(pllreg);
-
-	if (!div)
-		div = 1;
-
-	gd->cpu_clk = DIV_ROUND_CLOSEST(prate, div);
-}
-
-/**
- * get_uart_clk() - Get UART input frequency
- * @dev_index:	UART ID
- * Returns UART input clock frequency in Hz.
- *
- * Compared to zynq_clk_get_rate() this function is designed to work before
- * relocation and can be called when the serial UART is set up.
- */
-unsigned long get_uart_clk(int dev_index)
-{
-	u32 reg = readl(&slcr_base->uart_clk_ctrl);
-	u32 div = (reg & CLK_CTRL_DIV0_MASK) >> CLK_CTRL_DIV0_SHIFT;
-	u32 srcsel = (reg & CLK_CTRL_SRCSEL_MASK) >> CLK_CTRL_SRCSEL_SHIFT;
-	enum zynq_clk parent = __zynq_clk_periph_get_parent(srcsel);
-	u32 *pllreg = clkid_2_register(parent);
-	unsigned long prate = __zynq_clk_pll_get_rate(pllreg);
-
-	if (!div)
-		div = 1;
-
-	return DIV_ROUND_CLOSEST(prate, div);
-}
-
-/**
- * set_cpu_clk_info() - Initialize clock framework
- * Always returns zero.
- *
- * This function is called from common code after relocation and sets up the
- * clock framework. The framework must not be used before this function had been
- * called.
- */
-int set_cpu_clk_info(void)
-{
-	zynq_clk_register_pll(&clks[armpll_clk], &slcr_base->arm_pll_ctrl,
-			      "armpll", CONFIG_ZYNQ_PS_CLK_FREQ);
-	zynq_clk_register_pll(&clks[ddrpll_clk], &slcr_base->ddr_pll_ctrl,
-			      "ddrpll", CONFIG_ZYNQ_PS_CLK_FREQ);
-	zynq_clk_register_pll(&clks[iopll_clk], &slcr_base->io_pll_ctrl,
-			      "iopll", CONFIG_ZYNQ_PS_CLK_FREQ);
-
-	init_ddr_clocks();
-	init_cpu_clocks();
-	init_periph_clocks();
-	init_aper_clocks();
-
-	gd->bd->bi_arm_freq = gd->cpu_clk / 1000000;
-	gd->bd->bi_dsp_freq = 0;
-
-	return 0;
-}
-
-/**
- * zynq_clk_get_rate() - Get clock rate
- * @clk:	Clock identifier
- * Returns the current clock rate of @clk on success or zero for an invalid
- * clock id.
- */
-unsigned long zynq_clk_get_rate(enum zynq_clk clk)
-{
-	if (clk < 0 || clk >= clk_max)
-		return 0;
-
-	return clks[clk].frequency;
-}
-
-/**
- * zynq_clk_set_rate() - Set clock rate
- * @clk:	Clock identifier
- * @rate:	Requested clock rate
- * Passes on the return value from the clock's set_rate() function or negative
- * errno.
- */
-int zynq_clk_set_rate(enum zynq_clk clk, unsigned long rate)
-{
-	if (clk < 0 || clk >= clk_max)
-		return -ENODEV;
-
-	if (clks[clk].ops.set_rate)
-		return clks[clk].ops.set_rate(&clks[clk], rate);
-
-	return -ENXIO;
-}
-
-/**
- * zynq_clk_get_name() - Get clock name
- * @clk:	Clock identifier
- * Returns the name of @clk.
- */
-const char *zynq_clk_get_name(enum zynq_clk clk)
-{
-	return clks[clk].name;
-}
-
-/**
- * soc_clk_dump() - Print clock frequencies
- * Returns zero on success
- *
- * Implementation for the clk dump command.
- */
-int soc_clk_dump(void)
-{
-	int i;
-
-	printf("clk\t\tfrequency\n");
-	for (i = 0; i < clk_max; i++) {
-		const char *name = zynq_clk_get_name(i);
-		if (name)
-			printf("%10s%20lu\n", name, zynq_clk_get_rate(i));
-	}
-
-	return 0;
-}
diff --git a/arch/arm/cpu/armv7/zynq/cpu.c b/arch/arm/cpu/armv7/zynq/cpu.c
deleted file mode 100644
index 914b1feb68..0000000000
--- a/arch/arm/cpu/armv7/zynq/cpu.c
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * Copyright (C) 2012 Michal Simek <monstr@monstr.eu>
- * Copyright (C) 2012 Xilinx, Inc. All rights reserved.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/clk.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/arch/hardware.h>
-
-#define ZYNQ_SILICON_VER_MASK	0xF0000000
-#define ZYNQ_SILICON_VER_SHIFT	28
-
-int arch_cpu_init(void)
-{
-	zynq_slcr_unlock();
-#ifndef CONFIG_SPL_BUILD
-	/* Device config APB, unlock the PCAP */
-	writel(0x757BDF0D, &devcfg_base->unlock);
-	writel(0xFFFFFFFF, &devcfg_base->rom_shadow);
-
-#if (CONFIG_SYS_SDRAM_BASE == 0)
-	/* remap DDR to zero, FILTERSTART */
-	writel(0, &scu_base->filter_start);
-
-	/* OCM_CFG, Mask out the ROM, map ram into upper addresses */
-	writel(0x1F, &slcr_base->ocm_cfg);
-	/* FPGA_RST_CTRL, clear resets on AXI fabric ports */
-	writel(0x0, &slcr_base->fpga_rst_ctrl);
-	/* Set urgent bits with register */
-	writel(0x0, &slcr_base->ddr_urgent_sel);
-	/* Urgent write, ports S2/S3 */
-	writel(0xC, &slcr_base->ddr_urgent);
-#endif
-#endif
-	zynq_clk_early_init();
-	zynq_slcr_lock();
-
-	return 0;
-}
-
-unsigned int zynq_get_silicon_version(void)
-{
-	unsigned int ver;
-
-	ver = (readl(&devcfg_base->mctrl) &
-	       ZYNQ_SILICON_VER_MASK) >> ZYNQ_SILICON_VER_SHIFT;
-
-	return ver;
-}
-
-void reset_cpu(ulong addr)
-{
-	zynq_slcr_cpu_reset();
-	while (1)
-		;
-}
-
-#ifndef CONFIG_SYS_DCACHE_OFF
-void enable_caches(void)
-{
-	/* Enable D-cache. I-cache is already enabled in start.S */
-	dcache_enable();
-}
-#endif
diff --git a/arch/arm/cpu/armv7/zynq/ddrc.c b/arch/arm/cpu/armv7/zynq/ddrc.c
deleted file mode 100644
index 5b20accbcb..0000000000
--- a/arch/arm/cpu/armv7/zynq/ddrc.c
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * Copyright (C) 2012 - 2013 Michal Simek <monstr@monstr.eu>
- * Copyright (C) 2012 - 2013 Xilinx, Inc. All rights reserved.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/arch/hardware.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* Control regsiter bitfield definitions */
-#define ZYNQ_DDRC_CTRLREG_BUSWIDTH_MASK		0xC
-#define ZYNQ_DDRC_CTRLREG_BUSWIDTH_SHIFT	2
-#define ZYNQ_DDRC_CTRLREG_BUSWIDTH_16BIT	1
-
-/* ECC scrub regsiter definitions */
-#define ZYNQ_DDRC_ECC_SCRUBREG_ECC_MODE_MASK	0x7
-#define ZYNQ_DDRC_ECC_SCRUBREG_ECCMODE_SECDED	0x4
-
-void zynq_ddrc_init(void)
-{
-	u32 width, ecctype;
-
-	width = readl(&ddrc_base->ddrc_ctrl);
-	width = (width & ZYNQ_DDRC_CTRLREG_BUSWIDTH_MASK) >>
-					ZYNQ_DDRC_CTRLREG_BUSWIDTH_SHIFT;
-	ecctype = (readl(&ddrc_base->ecc_scrub) &
-		ZYNQ_DDRC_ECC_SCRUBREG_ECC_MODE_MASK);
-
-	/* ECC is enabled when memory is in 16bit mode and it is enabled */
-	if ((ecctype == ZYNQ_DDRC_ECC_SCRUBREG_ECCMODE_SECDED) &&
-	    (width == ZYNQ_DDRC_CTRLREG_BUSWIDTH_16BIT)) {
-		puts("ECC enabled ");
-		/*
-		 * Clear the first 1MB because it is not initialized from
-		 * first stage bootloader. To get ECC to work all memory has
-		 * been initialized by writing any value.
-		 */
-		/* cppcheck-suppress nullPointer */
-		memset((void *)0, 0, 1 * 1024 * 1024);
-
-		gd->ram_size /= 2;
-	} else {
-		puts("ECC disabled ");
-	}
-}
diff --git a/arch/arm/cpu/armv7/zynq/lowlevel_init.S b/arch/arm/cpu/armv7/zynq/lowlevel_init.S
deleted file mode 100644
index 6d714b711c..0000000000
--- a/arch/arm/cpu/armv7/zynq/lowlevel_init.S
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Copyright (C) 2013 Xilinx, Inc. All rights reserved.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <asm-offsets.h>
-#include <config.h>
-#include <linux/linkage.h>
-
-ENTRY(lowlevel_init)
-
-	/* Enable the the VFP */
-	mrc	p15, 0, r1, c1, c0, 2
-	orr	r1, r1, #(0x3 << 20)
-	orr	r1, r1, #(0x3 << 20)
-	mcr	p15, 0, r1, c1, c0, 2
-	isb
-	fmrx	r1, FPEXC
-	orr	r1,r1, #(1<<30)
-	fmxr	FPEXC, r1
-
-	/* Move back to caller */
-	mov	pc, lr
-
-ENDPROC(lowlevel_init)
diff --git a/arch/arm/cpu/armv7/zynq/slcr.c b/arch/arm/cpu/armv7/zynq/slcr.c
deleted file mode 100644
index 05f4099aae..0000000000
--- a/arch/arm/cpu/armv7/zynq/slcr.c
+++ /dev/null
@@ -1,203 +0,0 @@
-/*
- * Copyright (c) 2013 Xilinx Inc.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <malloc.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/arch/clk.h>
-
-#define SLCR_LOCK_MAGIC		0x767B
-#define SLCR_UNLOCK_MAGIC	0xDF0D
-
-#define SLCR_USB_L1_SEL			0x04
-
-#define SLCR_IDCODE_MASK	0x1F000
-#define SLCR_IDCODE_SHIFT	12
-
-/*
- * zynq_slcr_mio_get_status - Get the status of MIO peripheral.
- *
- * @peri_name: Name of the peripheral for checking MIO status
- * @get_pins: Pointer to array of get pin for this peripheral
- * @num_pins: Number of pins for this peripheral
- * @mask: Mask value
- * @check_val: Required check value to get the status of  periph
- */
-struct zynq_slcr_mio_get_status {
-	const char *peri_name;
-	const int *get_pins;
-	int num_pins;
-	u32 mask;
-	u32 check_val;
-};
-
-static const int usb0_pins[] = {
-	28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39
-};
-
-static const int usb1_pins[] = {
-	40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51
-};
-
-static const struct zynq_slcr_mio_get_status mio_periphs[] = {
-	{
-		"usb0",
-		usb0_pins,
-		ARRAY_SIZE(usb0_pins),
-		SLCR_USB_L1_SEL,
-		SLCR_USB_L1_SEL,
-	},
-	{
-		"usb1",
-		usb1_pins,
-		ARRAY_SIZE(usb1_pins),
-		SLCR_USB_L1_SEL,
-		SLCR_USB_L1_SEL,
-	},
-};
-
-static int slcr_lock = 1; /* 1 means locked, 0 means unlocked */
-
-void zynq_slcr_lock(void)
-{
-	if (!slcr_lock) {
-		writel(SLCR_LOCK_MAGIC, &slcr_base->slcr_lock);
-		slcr_lock = 1;
-	}
-}
-
-void zynq_slcr_unlock(void)
-{
-	if (slcr_lock) {
-		writel(SLCR_UNLOCK_MAGIC, &slcr_base->slcr_unlock);
-		slcr_lock = 0;
-	}
-}
-
-/* Reset the entire system */
-void zynq_slcr_cpu_reset(void)
-{
-	/*
-	 * Unlock the SLCR then reset the system.
-	 * Note that this seems to require raw i/o
-	 * functions or there's a lockup?
-	 */
-	zynq_slcr_unlock();
-
-	/*
-	 * Clear 0x0F000000 bits of reboot status register to workaround
-	 * the FSBL not loading the bitstream after soft-reboot
-	 * This is a temporary solution until we know more.
-	 */
-	clrbits_le32(&slcr_base->reboot_status, 0xF000000);
-
-	writel(1, &slcr_base->pss_rst_ctrl);
-}
-
-/* Setup clk for network */
-void zynq_slcr_gem_clk_setup(u32 gem_id, unsigned long clk_rate)
-{
-	int ret;
-
-	zynq_slcr_unlock();
-
-	if (gem_id > 1) {
-		printf("Non existing GEM id %d\n", gem_id);
-		goto out;
-	}
-
-	ret = zynq_clk_set_rate(gem0_clk + gem_id, clk_rate);
-	if (ret)
-		goto out;
-
-	if (gem_id) {
-		/* Configure GEM_RCLK_CTRL */
-		writel(1, &slcr_base->gem1_rclk_ctrl);
-	} else {
-		/* Configure GEM_RCLK_CTRL */
-		writel(1, &slcr_base->gem0_rclk_ctrl);
-	}
-	udelay(100000);
-out:
-	zynq_slcr_lock();
-}
-
-void zynq_slcr_devcfg_disable(void)
-{
-	u32 reg_val;
-
-	zynq_slcr_unlock();
-
-	/* Disable AXI interface by asserting FPGA resets */
-	writel(0xF, &slcr_base->fpga_rst_ctrl);
-
-	/* Disable Level shifters before setting PS-PL */
-	reg_val = readl(&slcr_base->lvl_shftr_en);
-	reg_val &= ~0xF;
-	writel(reg_val, &slcr_base->lvl_shftr_en);
-
-	/* Set Level Shifters DT618760 */
-	writel(0xA, &slcr_base->lvl_shftr_en);
-
-	zynq_slcr_lock();
-}
-
-void zynq_slcr_devcfg_enable(void)
-{
-	zynq_slcr_unlock();
-
-	/* Set Level Shifters DT618760 */
-	writel(0xF, &slcr_base->lvl_shftr_en);
-
-	/* Enable AXI interface by de-asserting FPGA resets */
-	writel(0x0, &slcr_base->fpga_rst_ctrl);
-
-	zynq_slcr_lock();
-}
-
-u32 zynq_slcr_get_boot_mode(void)
-{
-	/* Get the bootmode register value */
-	return readl(&slcr_base->boot_mode);
-}
-
-u32 zynq_slcr_get_idcode(void)
-{
-	return (readl(&slcr_base->pss_idcode) & SLCR_IDCODE_MASK) >>
-							SLCR_IDCODE_SHIFT;
-}
-
-/*
- * zynq_slcr_get_mio_pin_status - Get the MIO pin status of peripheral.
- *
- * @periph: Name of the peripheral
- *
- * Returns count to indicate the number of pins configured for the
- * given @periph.
- */
-int zynq_slcr_get_mio_pin_status(const char *periph)
-{
-	const struct zynq_slcr_mio_get_status *mio_ptr;
-	int val, i, j;
-	int mio = 0;
-
-	for (i = 0; i < ARRAY_SIZE(mio_periphs); i++) {
-		if (strcmp(periph, mio_periphs[i].peri_name) == 0) {
-			mio_ptr = &mio_periphs[i];
-			for (j = 0; j < mio_ptr->num_pins; j++) {
-				val = readl(&slcr_base->mio_pin
-						[mio_ptr->get_pins[j]]);
-				if ((val & mio_ptr->mask) == mio_ptr->check_val)
-					mio++;
-			}
-			break;
-		}
-	}
-
-	return mio;
-}
diff --git a/arch/arm/cpu/armv7/zynq/spl.c b/arch/arm/cpu/armv7/zynq/spl.c
deleted file mode 100644
index 13025f034b..0000000000
--- a/arch/arm/cpu/armv7/zynq/spl.c
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- * (C) Copyright 2014 Xilinx, Inc. Michal Simek
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-#include <common.h>
-#include <spl.h>
-
-#include <asm/io.h>
-#include <asm/arch/hardware.h>
-#include <asm/spl.h>
-#include <asm/arch/sys_proto.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-void board_init_f(ulong dummy)
-{
-	ps7_init();
-
-	/* Clear the BSS. */
-	memset(__bss_start, 0, __bss_end - __bss_start);
-
-	preloader_console_init();
-	arch_cpu_init();
-	board_init_r(NULL, 0);
-}
-
-#ifdef CONFIG_SPL_BOARD_INIT
-void spl_board_init(void)
-{
-	board_init();
-}
-#endif
-
-u32 spl_boot_device(void)
-{
-	u32 mode;
-
-	switch ((zynq_slcr_get_boot_mode()) & ZYNQ_BM_MASK) {
-#ifdef CONFIG_SPL_SPI_SUPPORT
-	case ZYNQ_BM_QSPI:
-		puts("qspi boot\n");
-		mode = BOOT_DEVICE_SPI;
-		break;
-#endif
-	case ZYNQ_BM_NAND:
-		mode = BOOT_DEVICE_NAND;
-		break;
-	case ZYNQ_BM_NOR:
-		mode = BOOT_DEVICE_NOR;
-		break;
-#ifdef CONFIG_SPL_MMC_SUPPORT
-	case ZYNQ_BM_SD:
-		puts("mmc boot\n");
-		mode = BOOT_DEVICE_MMC1;
-		break;
-#endif
-	case ZYNQ_BM_JTAG:
-		mode = BOOT_DEVICE_RAM;
-		break;
-	default:
-		puts("Unsupported boot mode selected\n");
-		hang();
-	}
-
-	return mode;
-}
-
-#ifdef CONFIG_SPL_MMC_SUPPORT
-u32 spl_boot_mode(void)
-{
-	return MMCSD_MODE_FS;
-}
-#endif
-
-#ifdef CONFIG_SPL_OS_BOOT
-int spl_start_uboot(void)
-{
-	/* boot linux */
-	return 0;
-}
-#endif
-
-__weak void ps7_init(void)
-{
-	/*
-	 * This function is overridden by the one in
-	 * board/xilinx/zynq/ps7_init_gpl.c, if it exists.
-	 */
-}
diff --git a/arch/arm/cpu/armv7/zynq/timer.c b/arch/arm/cpu/armv7/zynq/timer.c
deleted file mode 100644
index 5ed9642df9..0000000000
--- a/arch/arm/cpu/armv7/zynq/timer.c
+++ /dev/null
@@ -1,168 +0,0 @@
-/*
- * Copyright (C) 2012 Michal Simek <monstr@monstr.eu>
- * Copyright (C) 2011-2012 Xilinx, Inc. All rights reserved.
- *
- * (C) Copyright 2008
- * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
- *
- * (C) Copyright 2004
- * Philippe Robin, ARM Ltd. <philippe.robin@arm.com>
- *
- * (C) Copyright 2002-2004
- * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
- *
- * (C) Copyright 2003
- * Texas Instruments <www.ti.com>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <div64.h>
-#include <asm/io.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/clk.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-struct scu_timer {
-	u32 load; /* Timer Load Register */
-	u32 counter; /* Timer Counter Register */
-	u32 control; /* Timer Control Register */
-};
-
-static struct scu_timer *timer_base =
-			      (struct scu_timer *)ZYNQ_SCUTIMER_BASEADDR;
-
-#define SCUTIMER_CONTROL_PRESCALER_MASK	0x0000FF00 /* Prescaler */
-#define SCUTIMER_CONTROL_PRESCALER_SHIFT	8
-#define SCUTIMER_CONTROL_AUTO_RELOAD_MASK	0x00000002 /* Auto-reload */
-#define SCUTIMER_CONTROL_ENABLE_MASK		0x00000001 /* Timer enable */
-
-#define TIMER_LOAD_VAL 0xFFFFFFFF
-#define TIMER_PRESCALE 255
-
-int timer_init(void)
-{
-	const u32 emask = SCUTIMER_CONTROL_AUTO_RELOAD_MASK |
-			(TIMER_PRESCALE << SCUTIMER_CONTROL_PRESCALER_SHIFT) |
-			SCUTIMER_CONTROL_ENABLE_MASK;
-
-	gd->arch.timer_rate_hz = (gd->cpu_clk / 2) / (TIMER_PRESCALE + 1);
-
-	/* Load the timer counter register */
-	writel(0xFFFFFFFF, &timer_base->load);
-
-	/*
-	 * Start the A9Timer device
-	 * Enable Auto reload mode, Clear prescaler control bits
-	 * Set prescaler value, Enable the decrementer
-	 */
-	clrsetbits_le32(&timer_base->control, SCUTIMER_CONTROL_PRESCALER_MASK,
-								emask);
-
-	/* Reset time */
-	gd->arch.lastinc = readl(&timer_base->counter) /
-				(gd->arch.timer_rate_hz / CONFIG_SYS_HZ);
-	gd->arch.tbl = 0;
-
-	return 0;
-}
-
-/*
- * This function is derived from PowerPC code (read timebase as long long).
- * On ARM it just returns the timer value.
- */
-ulong get_timer_masked(void)
-{
-	ulong now;
-
-	now = readl(&timer_base->counter) /
-			(gd->arch.timer_rate_hz / CONFIG_SYS_HZ);
-
-	if (gd->arch.lastinc >= now) {
-		/* Normal mode */
-		gd->arch.tbl += gd->arch.lastinc - now;
-	} else {
-		/* We have an overflow ... */
-		gd->arch.tbl += gd->arch.lastinc + (TIMER_LOAD_VAL /
-				(gd->arch.timer_rate_hz / CONFIG_SYS_HZ)) -
-				now + 1;
-	}
-	gd->arch.lastinc = now;
-
-	return gd->arch.tbl;
-}
-
-void __udelay(unsigned long usec)
-{
-	u32 countticks;
-	u32 timeend;
-	u32 timediff;
-	u32 timenow;
-
-	if (usec == 0)
-		return;
-
-	countticks = lldiv(((unsigned long long)gd->arch.timer_rate_hz * usec),
-			   1000000);
-
-	/* decrementing timer */
-	timeend = readl(&timer_base->counter) - countticks;
-
-#if TIMER_LOAD_VAL != 0xFFFFFFFF
-	/* do not manage multiple overflow */
-	if (countticks >= TIMER_LOAD_VAL)
-		countticks = TIMER_LOAD_VAL - 1;
-#endif
-
-	do {
-		timenow = readl(&timer_base->counter);
-
-		if (timenow >= timeend) {
-			/* normal case */
-			timediff = timenow - timeend;
-		} else {
-			if ((TIMER_LOAD_VAL - timeend + timenow) <=
-								countticks) {
-				/* overflow */
-				timediff = TIMER_LOAD_VAL - timeend + timenow;
-			} else {
-				/* missed the exact match */
-				break;
-			}
-		}
-	} while (timediff > 0);
-}
-
-/* Timer without interrupts */
-ulong get_timer(ulong base)
-{
-	return get_timer_masked() - base;
-}
-
-/*
- * This function is derived from PowerPC code (read timebase as long long).
- * On ARM it just returns the timer value.
- */
-unsigned long long get_ticks(void)
-{
-	return get_timer(0);
-}
-
-/*
- * This function is derived from PowerPC code (timebase clock frequency).
- * On ARM it returns the number of timer ticks per second.
- */
-ulong get_tbclk(void)
-{
-	return CONFIG_SYS_HZ;
-}
diff --git a/arch/arm/cpu/armv7/zynq/u-boot-spl.lds b/arch/arm/cpu/armv7/zynq/u-boot-spl.lds
deleted file mode 100644
index 0f2f756f83..0000000000
--- a/arch/arm/cpu/armv7/zynq/u-boot-spl.lds
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * Copyright (c) 2014 Xilinx, Inc. Michal Simek
- * Copyright (c) 2004-2008 Texas Instruments
- *
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-MEMORY { .sram : ORIGIN = CONFIG_SPL_TEXT_BASE,\
-		LENGTH = CONFIG_SPL_MAX_SIZE }
-MEMORY { .sdram : ORIGIN = CONFIG_SPL_BSS_START_ADDR, \
-		LENGTH = CONFIG_SPL_BSS_MAX_SIZE }
-
-OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-SECTIONS
-{
-	. = ALIGN(4);
-	.text :
-	{
-		__image_copy_start = .;
-		*(.vectors)
-		CPUDIR/start.o (.text*)
-		*(.text*)
-	} > .sram
-
-	. = ALIGN(4);
-	.rodata : {
-		*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
-	} > .sram
-
-	. = ALIGN(4);
-	.data : {
-		*(.data*)
-	} > .sram
-
-	. = ALIGN(4);
-
-	. = .;
-
-	__image_copy_end = .;
-
-	_end = .;
-
-	/* Move BSS section to RAM because of FAT */
-	.bss (NOLOAD) : {
-		__bss_start = .;
-		*(.bss*)
-		 . = ALIGN(4);
-		__bss_end = .;
-	} > .sdram
-
-	/DISCARD/ : { *(.dynsym) }
-	/DISCARD/ : { *(.dynstr*) }
-	/DISCARD/ : { *(.dynamic*) }
-	/DISCARD/ : { *(.plt*) }
-	/DISCARD/ : { *(.interp*) }
-	/DISCARD/ : { *(.gnu*) }
-}
diff --git a/arch/arm/cpu/armv7/zynq/u-boot.lds b/arch/arm/cpu/armv7/zynq/u-boot.lds
deleted file mode 100644
index 4dc9bb0102..0000000000
--- a/arch/arm/cpu/armv7/zynq/u-boot.lds
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * Copyright (c) 2004-2008 Texas Instruments
- *
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-SECTIONS
-{
-	. = 0x00000000;
-
-	. = ALIGN(4);
-	.text :
-	{
-		*(.__image_copy_start)
-		*(.vectors)
-		CPUDIR/start.o (.text*)
-		*(.text*)
-	}
-
-	. = ALIGN(4);
-	.rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
-
-	. = ALIGN(4);
-	.data : {
-		*(.data*)
-	}
-
-	. = ALIGN(4);
-
-	. = .;
-
-	. = ALIGN(4);
-	.u_boot_list : {
-		KEEP(*(SORT(.u_boot_list*)));
-	}
-
-	. = ALIGN(4);
-
-	.image_copy_end :
-	{
-		*(.__image_copy_end)
-	}
-
-	.rel_dyn_start :
-	{
-		*(.__rel_dyn_start)
-	}
-
-	.rel.dyn : {
-		*(.rel*)
-	}
-
-	.rel_dyn_end :
-	{
-		*(.__rel_dyn_end)
-	}
-
-	.end :
-	{
-		*(.__end)
-	}
-
-	_image_binary_end = .;
-
-/*
- * Compiler-generated __bss_start and __bss_end, see arch/arm/lib/bss.c
- * __bss_base and __bss_limit are for linker only (overlay ordering)
- */
-
-	.bss_start __rel_dyn_start (OVERLAY) : {
-		KEEP(*(.__bss_start));
-		__bss_base = .;
-	}
-
-	.bss __bss_base (OVERLAY) : {
-		*(.bss*)
-		 . = ALIGN(4);
-		 __bss_limit = .;
-	}
-
-	.bss_end __bss_limit (OVERLAY) : {
-		KEEP(*(.__bss_end));
-	}
-
-	/*
-	 * Zynq needs to discard these sections because the user
-	 * is expected to pass this image on to tools for boot.bin
-	 * generation that require them to be dropped.
-	 */
-	/DISCARD/ : { *(.dynsym) }
-	/DISCARD/ : { *(.dynbss*) }
-	/DISCARD/ : { *(.dynstr*) }
-	/DISCARD/ : { *(.dynamic*) }
-	/DISCARD/ : { *(.plt*) }
-	/DISCARD/ : { *(.interp*) }
-	/DISCARD/ : { *(.gnu*) }
-	/DISCARD/ : { *(.ARM.exidx*) }
-	/DISCARD/ : { *(.gnu.linkonce.armexidx.*) }
-}