mx6: soc: Disable VDDPU regulator

As U-boot does not use GPU/VPU peripherals, shutdown the VDDPU regulator
in order to save power.

Signed-off-by: Anson Huang <b20788@freescale.com>
Signed-off-by: Jason Liu <r64343@freescale.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>

1 files changed, 41 insertions, 0 deletions

diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c
index 0208cba9cc..009a644abf 100644
--- a/arch/arm/cpu/armv7/mx6/soc.c
+++ b/arch/arm/cpu/armv7/mx6/soc.c
@@ -19,6 +19,8 @@
 #include <asm/arch/mxc_hdmi.h>
 #include <asm/arch/crm_regs.h>
 
+#define VDDPU_MASK	(0x1f << 9)
+
 enum ldo_reg {
 	LDO_ARM,
 	LDO_SOC,
@@ -177,11 +179,50 @@ static void imx_set_wdog_powerdown(bool enable)
 	writew(enable, &wdog2->wmcr);
 }
 
+static void imx_set_vddpu_power_down(void)
+{
+	struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR;
+	struct gpc_regs *gpc = (struct gpc_regs *)GPC_BASE_ADDR;
+
+	u32 reg;
+
+	/*
+	 * Disable the brown out detection since we are going to be
+	 * disabling the LDO.
+	 */
+	reg = readl(&anatop->ana_misc2);
+	reg &= ~ANADIG_ANA_MISC2_REG1_BO_EN;
+	writel(reg, &anatop->ana_misc2);
+
+	/* need to power down xPU in GPC before turning off PU LDO */
+	reg = readl(&gpc->gpu_ctrl);
+	writel(reg | 0x1, &gpc->gpu_ctrl);
+
+	reg = readl(&gpc->ctrl);
+	writel(reg | 0x1, &gpc->ctrl);
+	while (readl(&gpc->ctrl) & 0x1)
+		;
+
+	/* Mask the ANATOP brown out interrupt in the GPC. */
+	reg = readl(&gpc->imr4);
+	reg |= 0x80000000;
+	writel(reg, &gpc->imr4);
+
+	/* disable VDDPU */
+	writel(VDDPU_MASK, &anatop->reg_core_clr);
+
+	/* Clear the BO interrupt in the ANATOP. */
+	reg = readl(&anatop->ana_misc1);
+	reg |= 0x80000000;
+	writel(reg, &anatop->ana_misc1);
+}
+
 int arch_cpu_init(void)
 {
 	init_aips();
 
 	imx_set_wdog_powerdown(false); /* Disable PDE bit of WMCR register */
+	imx_set_vddpu_power_down();
 
 #ifdef CONFIG_APBH_DMA
 	/* Start APBH DMA */