Merge remote-tracking branch 'u-boot/master'

12 files changed, 71 insertions, 605 deletions

diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c
index ecc26717cd..978b184fb2 100644
--- a/arch/arm/cpu/armv7/am33xx/board.c
+++ b/arch/arm/cpu/armv7/am33xx/board.c
@@ -18,6 +18,7 @@
 
 #include <common.h>
 #include <errno.h>
+#include <spl.h>
 #include <asm/arch/cpu.h>
 #include <asm/arch/hardware.h>
 #include <asm/arch/omap.h>
@@ -27,7 +28,6 @@
 #include <asm/arch/mmc_host_def.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/io.h>
-#include <asm/omap_common.h>
 #include <asm/emif.h>
 #include <asm/gpio.h>
 #include <i2c.h>
@@ -166,6 +166,8 @@ void s_init(void)
 	regVal |= UART_SMART_IDLE_EN;
 	writel(regVal, &uart_base->uartsyscfg);
 
+	gd = &gdata;
+
 	preloader_console_init();
 
 	/* Initalize the board header */
diff --git a/arch/arm/cpu/armv7/omap-common/Makefile b/arch/arm/cpu/armv7/omap-common/Makefile
index d37b22d98a..1f2fa027c8 100644
--- a/arch/arm/cpu/armv7/omap-common/Makefile
+++ b/arch/arm/cpu/armv7/omap-common/Makefile
@@ -42,19 +42,6 @@ COBJS	+= boot-common.o
 SOBJS	+= lowlevel_init.o
 endif
 
-ifdef CONFIG_SPL_BUILD
-COBJS	+= spl.o
-ifdef CONFIG_SPL_NAND_SUPPORT
-COBJS	+= spl_nand.o
-endif
-ifdef CONFIG_SPL_MMC_SUPPORT
-COBJS	+= spl_mmc.o
-endif
-ifdef CONFIG_SPL_YMODEM_SUPPORT
-COBJS	+= spl_ymodem.o
-endif
-endif
-
 ifndef CONFIG_SPL_BUILD
 ifneq ($(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX),)
 COBJS	+= mem-common.o
diff --git a/arch/arm/cpu/armv7/omap-common/boot-common.c b/arch/arm/cpu/armv7/omap-common/boot-common.c
index f211f7670c..0f19141cc2 100644
--- a/arch/arm/cpu/armv7/omap-common/boot-common.c
+++ b/arch/arm/cpu/armv7/omap-common/boot-common.c
@@ -17,8 +17,10 @@
  */
 
 #include <common.h>
+#include <spl.h>
 #include <asm/omap_common.h>
 #include <asm/arch/omap.h>
+#include <asm/arch/mmc_host_def.h>
 
 /*
  * This is used to verify if the configuration header
@@ -37,13 +39,34 @@ struct omap_boot_parameters boot_params __attribute__ ((section(".data")));
  */
 u32 omap_bootmode = MMCSD_MODE_FAT;
 
-u32 omap_boot_device(void)
+u32 spl_boot_device(void)
 {
 	return (u32) (boot_params.omap_bootdevice);
 }
 
-u32 omap_boot_mode(void)
+u32 spl_boot_mode(void)
 {
 	return omap_bootmode;
 }
+
+void spl_board_init(void)
+{
+#ifdef CONFIG_SPL_NAND_SUPPORT
+	gpmc_init();
+#endif
+}
+
+int board_mmc_init(bd_t *bis)
+{
+	switch (spl_boot_device()) {
+	case BOOT_DEVICE_MMC1:
+		omap_mmc_init(0, 0, 0);
+		break;
+	case BOOT_DEVICE_MMC2:
+	case BOOT_DEVICE_MMC2_2:
+		omap_mmc_init(1, 0, 0);
+		break;
+	}
+	return 0;
+}
 #endif
diff --git a/arch/arm/cpu/armv7/omap-common/hwinit-common.c b/arch/arm/cpu/armv7/omap-common/hwinit-common.c
index 459ebb55e5..9ef10bdf2d 100644
--- a/arch/arm/cpu/armv7/omap-common/hwinit-common.c
+++ b/arch/arm/cpu/armv7/omap-common/hwinit-common.c
@@ -28,10 +28,10 @@
  * MA 02111-1307 USA
  */
 #include <common.h>
+#include <spl.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/sizes.h>
 #include <asm/emif.h>
-#include <asm/omap_common.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -92,6 +92,11 @@ static void init_boot_params(void)
 {
 	boot_params_ptr = (u32 *) &boot_params;
 }
+
+void spl_display_print(void)
+{
+	omap_rev_string();
+}
 #endif
 
 /*
@@ -119,6 +124,9 @@ void s_init(void)
 	set_mux_conf_regs();
 #ifdef CONFIG_SPL_BUILD
 	setup_clocks_for_console();
+
+	gd = &gdata;
+
 	preloader_console_init();
 	do_io_settings();
 #endif
diff --git a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S
index 1ece073630..9766563d02 100644
--- a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S
+++ b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S
@@ -52,18 +52,18 @@ ENTRY(save_boot_params)
 	ldr	r1, =boot_params
 	str	r0, [r1]
 #ifdef CONFIG_SPL_BUILD
-	/* Store the boot device in omap_boot_device */
+	/* Store the boot device in spl_boot_device */
 	ldrb	r2, [r0, #BOOT_DEVICE_OFFSET]	@ r1 <- value of boot device
 	and	r2, #BOOT_DEVICE_MASK
 	ldr	r3, =boot_params
-	strb	r2, [r3, #BOOT_DEVICE_OFFSET]	@ omap_boot_device <- r1
+	strb	r2, [r3, #BOOT_DEVICE_OFFSET]	@ spl_boot_device <- r1
 
 	/* boot mode is passed only for devices that can raw/fat mode */
 	cmp	r2, #2
 	blt	2f
 	cmp	r2, #7
 	bgt	2f
-	/* Store the boot mode (raw/FAT) in omap_boot_mode */
+	/* Store the boot mode (raw/FAT) in omap_bootmode */
 	ldr	r2, [r0, #DEV_DESC_PTR_OFFSET]	@ get the device descriptor ptr
 	ldr	r2, [r2, #DEV_DATA_PTR_OFFSET]	@ get the pDeviceData ptr
 	ldr	r2, [r2, #BOOT_MODE_OFFSET]	@ get the boot mode
diff --git a/arch/arm/cpu/armv7/omap-common/spl.c b/arch/arm/cpu/armv7/omap-common/spl.c
deleted file mode 100644
index 4d1ac85d00..0000000000
--- a/arch/arm/cpu/armv7/omap-common/spl.c
+++ /dev/null
@@ -1,228 +0,0 @@
-/*
- * (C) Copyright 2010
- * Texas Instruments, <www.ti.com>
- *
- * Aneesh V <aneesh@ti.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#include <common.h>
-#include <asm/u-boot.h>
-#include <asm/utils.h>
-#include <asm/arch/sys_proto.h>
-#include <nand.h>
-#include <mmc.h>
-#include <fat.h>
-#include <version.h>
-#include <asm/omap_common.h>
-#include <asm/arch/mmc_host_def.h>
-#include <i2c.h>
-#include <image.h>
-#include <malloc.h>
-#include <linux/compiler.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-u32* boot_params_ptr = NULL;
-struct spl_image_info spl_image;
-
-/* Define global data structure pointer to it*/
-static gd_t gdata __attribute__ ((section(".data")));
-static bd_t bdata __attribute__ ((section(".data")));
-
-inline void hang(void)
-{
-	puts("### ERROR ### Please RESET the board ###\n");
-	for (;;)
-		;
-}
-
-void board_init_f(ulong dummy)
-{
-	/*
-	 * We call relocate_code() with relocation target same as the
-	 * CONFIG_SYS_SPL_TEXT_BASE. This will result in relocation getting
-	 * skipped. Instead, only .bss initialization will happen. That's
-	 * all we need
-	 */
-	debug(">>board_init_f()\n");
-	relocate_code(CONFIG_SPL_STACK, &gdata, CONFIG_SPL_TEXT_BASE);
-}
-
-/*
- * Default function to determine if u-boot or the OS should
- * be started. This implementation always returns 1.
- *
- * Please implement your own board specific funcion to do this.
- *
- * RETURN
- * 0 to not start u-boot
- * positive if u-boot should start
- */
-#ifdef CONFIG_SPL_OS_BOOT
-__weak int spl_start_uboot(void)
-{
-	printf("SPL: Please implement spl_start_uboot() for your board\n");
-	printf("SPL: Direct Linux boot not active!\n");
-	return 1;
-}
-#endif
-
-void spl_parse_image_header(const struct image_header *header)
-{
-	u32 header_size = sizeof(struct image_header);
-
-	if (__be32_to_cpu(header->ih_magic) == IH_MAGIC) {
-		spl_image.size = __be32_to_cpu(header->ih_size) + header_size;
-		spl_image.entry_point = __be32_to_cpu(header->ih_load);
-		/* Load including the header */
-		spl_image.load_addr = spl_image.entry_point - header_size;
-		spl_image.os = header->ih_os;
-		spl_image.name = (const char *)&header->ih_name;
-		debug("spl: payload image: %s load addr: 0x%x size: %d\n",
-			spl_image.name, spl_image.load_addr, spl_image.size);
-	} else {
-		/* Signature not found - assume u-boot.bin */
-		printf("mkimage signature not found - ih_magic = %x\n",
-			header->ih_magic);
-		debug("Assuming u-boot.bin ..\n");
-		/* Let's assume U-Boot will not be more than 200 KB */
-		spl_image.size = 200 * 1024;
-		spl_image.entry_point = CONFIG_SYS_TEXT_BASE;
-		spl_image.load_addr = CONFIG_SYS_TEXT_BASE;
-		spl_image.os = IH_OS_U_BOOT;
-		spl_image.name = "U-Boot";
-	}
-}
-
-/*
- * This function jumps to an image with argument. Normally an FDT or ATAGS
- * image.
- * arg: Pointer to paramter image in RAM
- */
-#ifdef CONFIG_SPL_OS_BOOT
-static void __noreturn jump_to_image_linux(void *arg)
-{
-	debug("Entering kernel arg pointer: 0x%p\n", arg);
-	typedef void (*image_entry_arg_t)(int, int, void *)
-		__attribute__ ((noreturn));
-	image_entry_arg_t image_entry =
-		(image_entry_arg_t) spl_image.entry_point;
-	cleanup_before_linux();
-	image_entry(0, CONFIG_MACH_TYPE, arg);
-}
-#endif
-
-static void __noreturn jump_to_image_no_args(void)
-{
-	typedef void __noreturn (*image_entry_noargs_t)(u32 *);
-	image_entry_noargs_t image_entry =
-			(image_entry_noargs_t) spl_image.entry_point;
-
-	debug("image entry point: 0x%X\n", spl_image.entry_point);
-	/* Pass the saved boot_params from rom code */
-#if defined(CONFIG_VIRTIO) || defined(CONFIG_ZEBU)
-	image_entry = (image_entry_noargs_t)0x80100000;
-#endif
-	u32 boot_params_ptr_addr = (u32)&boot_params_ptr;
-	image_entry((u32 *)boot_params_ptr_addr);
-}
-
-void board_init_r(gd_t *id, ulong dummy)
-{
-	u32 boot_device;
-	debug(">>spl:board_init_r()\n");
-
-	mem_malloc_init(CONFIG_SYS_SPL_MALLOC_START,
-			CONFIG_SYS_SPL_MALLOC_SIZE);
-
-#ifdef CONFIG_SPL_BOARD_INIT
-	spl_board_init();
-#endif
-
-	boot_device = omap_boot_device();
-	debug("boot device - %d\n", boot_device);
-	switch (boot_device) {
-#ifdef CONFIG_SPL_MMC_SUPPORT
-	case BOOT_DEVICE_MMC1:
-	case BOOT_DEVICE_MMC2:
-	case BOOT_DEVICE_MMC2_2:
-		spl_mmc_load_image();
-		break;
-#endif
-#ifdef CONFIG_SPL_NAND_SUPPORT
-	case BOOT_DEVICE_NAND:
-		spl_nand_load_image();
-		break;
-#endif
-#ifdef CONFIG_SPL_YMODEM_SUPPORT
-	case BOOT_DEVICE_UART:
-		spl_ymodem_load_image();
-		break;
-#endif
-	default:
-		printf("SPL: Un-supported Boot Device - %d!!!\n", boot_device);
-		hang();
-		break;
-	}
-
-	switch (spl_image.os) {
-	case IH_OS_U_BOOT:
-		debug("Jumping to U-Boot\n");
-		jump_to_image_no_args();
-		break;
-#ifdef CONFIG_SPL_OS_BOOT
-	case IH_OS_LINUX:
-		debug("Jumping to Linux\n");
-		spl_board_prepare_for_linux();
-		jump_to_image_linux((void *)CONFIG_SYS_SPL_ARGS_ADDR);
-		break;
-#endif
-	default:
-		puts("Unsupported OS image.. Jumping nevertheless..\n");
-		jump_to_image_no_args();
-	}
-}
-
-/* This requires UART clocks to be enabled */
-void preloader_console_init(void)
-{
-	const char *u_boot_rev = U_BOOT_VERSION;
-
-	gd = &gdata;
-	gd->bd = &bdata;
-	gd->flags |= GD_FLG_RELOC;
-	gd->baudrate = CONFIG_BAUDRATE;
-
-	serial_init();		/* serial communications setup */
-
-	gd->have_console = 1;
-
-	/* Avoid a second "U-Boot" coming from this string */
-	u_boot_rev = &u_boot_rev[7];
-
-	printf("\nU-Boot SPL %s (%s - %s)\n", u_boot_rev, U_BOOT_DATE,
-		U_BOOT_TIME);
-	omap_rev_string();
-}
-
-void __weak omap_rev_string()
-{
-	printf("Texas Instruments Revision detection unimplemented\n");
-}
diff --git a/arch/arm/cpu/armv7/omap-common/spl_mmc.c b/arch/arm/cpu/armv7/omap-common/spl_mmc.c
deleted file mode 100644
index 2f921bb07d..0000000000
--- a/arch/arm/cpu/armv7/omap-common/spl_mmc.c
+++ /dev/null
@@ -1,150 +0,0 @@
-/*
- * (C) Copyright 2010
- * Texas Instruments, <www.ti.com>
- *
- * Aneesh V <aneesh@ti.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#include <common.h>
-#include <asm/u-boot.h>
-#include <asm/utils.h>
-#include <asm/arch/sys_proto.h>
-#include <mmc.h>
-#include <fat.h>
-#include <version.h>
-#include <asm/omap_common.h>
-#include <asm/arch/mmc_host_def.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifdef CONFIG_GENERIC_MMC
-int board_mmc_init(bd_t *bis)
-{
-	switch (omap_boot_device()) {
-	case BOOT_DEVICE_MMC1:
-		omap_mmc_init(0, 0, 0);
-		break;
-	case BOOT_DEVICE_MMC2:
-	case BOOT_DEVICE_MMC2_2:
-		omap_mmc_init(1, 0, 0);
-		break;
-	}
-	return 0;
-}
-#endif
-
-static void mmc_load_image_raw(struct mmc *mmc)
-{
-	u32 image_size_sectors, err;
-	const struct image_header *header;
-
-	header = (struct image_header *)(CONFIG_SYS_TEXT_BASE -
-						sizeof(struct image_header));
-
-	/* read image header to find the image size & load address */
-	err = mmc->block_dev.block_read(0,
-			CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR, 1,
-			(void *)header);
-
-	if (err <= 0)
-		goto end;
-
-	spl_parse_image_header(header);
-
-	/* convert size to sectors - round up */
-	image_size_sectors = (spl_image.size + MMCSD_SECTOR_SIZE - 1) /
-				MMCSD_SECTOR_SIZE;
-
-	/* Read the header too to avoid extra memcpy */
-	err = mmc->block_dev.block_read(0,
-			CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR,
-			image_size_sectors, (void *)spl_image.load_addr);
-
-end:
-	if (err <= 0) {
-		printf("spl: mmc blk read err - %d\n", err);
-		hang();
-	}
-}
-
-static void mmc_load_image_fat(struct mmc *mmc)
-{
-	s32 err;
-	struct image_header *header;
-
-	header = (struct image_header *)(CONFIG_SYS_TEXT_BASE -
-						sizeof(struct image_header));
-
-	err = fat_register_device(&mmc->block_dev,
-				CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION);
-	if (err) {
-		printf("spl: fat register err - %d\n", err);
-		hang();
-	}
-
-	err = file_fat_read(CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME,
-				(u8 *)header, sizeof(struct image_header));
-	if (err <= 0)
-		goto end;
-
-	spl_parse_image_header(header);
-
-	err = file_fat_read(CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME,
-				(u8 *)spl_image.load_addr, 0);
-
-end:
-	if (err <= 0) {
-		printf("spl: error reading image %s, err - %d\n",
-			CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME, err);
-		hang();
-	}
-}
-
-void spl_mmc_load_image(void)
-{
-	struct mmc *mmc;
-	int err;
-	u32 boot_mode;
-
-	mmc_initialize(gd->bd);
-	/* We register only one device. So, the dev id is always 0 */
-	mmc = find_mmc_device(0);
-	if (!mmc) {
-		puts("spl: mmc device not found!!\n");
-		hang();
-	}
-
-	err = mmc_init(mmc);
-	if (err) {
-		printf("spl: mmc init failed: err - %d\n", err);
-		hang();
-	}
-	boot_mode = omap_boot_mode();
-	if (boot_mode == MMCSD_MODE_RAW) {
-		debug("boot mode - RAW\n");
-		mmc_load_image_raw(mmc);
-	} else if (boot_mode == MMCSD_MODE_FAT) {
-		debug("boot mode - FAT\n");
-		mmc_load_image_fat(mmc);
-	} else {
-		puts("spl: wrong MMC boot mode\n");
-		hang();
-	}
-}
diff --git a/arch/arm/cpu/armv7/omap-common/spl_nand.c b/arch/arm/cpu/armv7/omap-common/spl_nand.c
deleted file mode 100644
index 8cf55c9a1c..0000000000
--- a/arch/arm/cpu/armv7/omap-common/spl_nand.c
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * Copyright (C) 2011
- * Corscience GmbH & Co. KG - Simon Schwarz <schwarz@corscience.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#include <common.h>
-#include <asm/u-boot.h>
-#include <asm/utils.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/io.h>
-#include <nand.h>
-#include <version.h>
-#include <asm/omap_common.h>
-
-void spl_nand_load_image(void)
-{
-	struct image_header *header;
-	int *src __attribute__((unused));
-	int *dst __attribute__((unused));
-
-	switch (omap_boot_mode()) {
-	case NAND_MODE_HW_ECC:
-		debug("spl: nand - using hw ecc\n");
-		gpmc_init();
-		nand_init();
-		break;
-	default:
-		puts("spl: ERROR: This bootmode is not implemented - hanging");
-		hang();
-	}
-
-	/*use CONFIG_SYS_TEXT_BASE as temporary storage area */
-	header = (struct image_header *)(CONFIG_SYS_TEXT_BASE);
-#ifdef CONFIG_SPL_OS_BOOT
-	if (!spl_start_uboot()) {
-		/*
-		 * load parameter image
-		 * load to temp position since nand_spl_load_image reads
-		 * a whole block which is typically larger than
-		 * CONFIG_CMD_SPL_WRITE_SIZE therefore may overwrite
-		 * following sections like BSS
-		 */
-		nand_spl_load_image(CONFIG_CMD_SPL_NAND_OFS,
-			CONFIG_CMD_SPL_WRITE_SIZE,
-			(void *)CONFIG_SYS_TEXT_BASE);
-		/* copy to destintion */
-		for (dst = (int *)CONFIG_SYS_SPL_ARGS_ADDR,
-				src = (int *)CONFIG_SYS_TEXT_BASE;
-				src < (int *)(CONFIG_SYS_TEXT_BASE +
-				CONFIG_CMD_SPL_WRITE_SIZE);
-				src++, dst++) {
-			writel(readl(src), dst);
-		}
-
-		/* load linux */
-		nand_spl_load_image(CONFIG_SYS_NAND_SPL_KERNEL_OFFS,
-			CONFIG_SYS_NAND_PAGE_SIZE, (void *)header);
-		spl_parse_image_header(header);
-		if (header->ih_os == IH_OS_LINUX) {
-			/* happy - was a linux */
-			nand_spl_load_image(CONFIG_SYS_NAND_SPL_KERNEL_OFFS,
-				spl_image.size, (void *)spl_image.load_addr);
-			nand_deselect();
-			return;
-		} else {
-			printf("The Expected Linux image was not"
-				"found. Please check your NAND"
-				"configuration.\n");
-			printf("Trying to start u-boot now...\n");
-		}
-	}
-#endif
-#ifdef CONFIG_NAND_ENV_DST
-	nand_spl_load_image(CONFIG_ENV_OFFSET,
-		CONFIG_SYS_NAND_PAGE_SIZE, (void *)header);
-	spl_parse_image_header(header);
-	nand_spl_load_image(CONFIG_ENV_OFFSET, spl_image.size,
-		(void *)spl_image.load_addr);
-#ifdef CONFIG_ENV_OFFSET_REDUND
-	nand_spl_load_image(CONFIG_ENV_OFFSET_REDUND,
-		CONFIG_SYS_NAND_PAGE_SIZE, (void *)header);
-	spl_parse_image_header(header);
-	nand_spl_load_image(CONFIG_ENV_OFFSET_REDUND, spl_image.size,
-		(void *)spl_image.load_addr);
-#endif
-#endif
-	/* Load u-boot */
-	nand_spl_load_image(CONFIG_SYS_NAND_U_BOOT_OFFS,
-		CONFIG_SYS_NAND_PAGE_SIZE, (void *)header);
-	spl_parse_image_header(header);
-	nand_spl_load_image(CONFIG_SYS_NAND_U_BOOT_OFFS,
-		spl_image.size, (void *)spl_image.load_addr);
-	nand_deselect();
-}
diff --git a/arch/arm/cpu/armv7/omap-common/spl_ymodem.c b/arch/arm/cpu/armv7/omap-common/spl_ymodem.c
deleted file mode 100644
index 47663f7edf..0000000000
--- a/arch/arm/cpu/armv7/omap-common/spl_ymodem.c
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2011
- * Texas Instruments, <www.ti.com>
- *
- * Matt Porter <mporter@ti.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#include <common.h>
-#include <xyzModem.h>
-#include <asm/u-boot.h>
-#include <asm/utils.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/omap_common.h>
-
-#define BUF_SIZE 1024
-
-static int getcymodem(void) {
-	if (tstc())
-		return (getc());
-	return -1;
-}
-
-void spl_ymodem_load_image(void)
-{
-	int size = 0;
-	int err;
-	int res;
-	int ret;
-	connection_info_t info;
-	char buf[BUF_SIZE];
-	ulong store_addr = ~0;
-	ulong addr = 0;
-
-	info.mode = xyzModem_ymodem;
-	ret = xyzModem_stream_open(&info, &err);
-
-	if (!ret) {
-		while ((res =
-			xyzModem_stream_read(buf, BUF_SIZE, &err)) > 0) {
-			if (addr == 0)
-				spl_parse_image_header((struct image_header *)buf);
-			store_addr = addr + spl_image.load_addr;
-			size += res;
-			addr += res;
-			memcpy((char *)(store_addr), buf, res);
-		}
-	} else {
-		printf("spl: ymodem err - %s\n", xyzModem_error(err));
-		hang();
-	}
-
-	xyzModem_stream_close(&err);
-	xyzModem_stream_terminate(false, &getcymodem);
-
-	printf("Loaded %d bytes\n", size);
-}
diff --git a/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds b/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds
index 8867e0604d..1d8efb213b 100644
--- a/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds
+++ b/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds
@@ -37,9 +37,9 @@ SECTIONS
 {
 	.text      :
 	{
-	__start = .;
-	  arch/arm/cpu/armv7/start.o	(.text)
-	  *(.text*)
+		__start = .;
+		arch/arm/cpu/armv7/start.o	(.text)
+		*(.text*)
 	} >.sram
 
 	. = ALIGN(4);
diff --git a/arch/arm/cpu/armv7/omap3/board.c b/arch/arm/cpu/armv7/omap3/board.c
index f2e52e9ce1..9cee1d9b49 100644
--- a/arch/arm/cpu/armv7/omap3/board.c
+++ b/arch/arm/cpu/armv7/omap3/board.c
@@ -33,6 +33,7 @@
  * MA 02111-1307 USA
  */
 #include <common.h>
+#include <spl.h>
 #include <asm/io.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/arch/mem.h>
@@ -40,9 +41,12 @@
 #include <asm/armv7.h>
 #include <asm/arch/gpio.h>
 #include <asm/omap_common.h>
+#include <asm/arch/mmc_host_def.h>
 #include <i2c.h>
 #include <linux/compiler.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /* Declarations */
 extern omap3_sysinfo sysinfo;
 static void omap3_setup_aux_cr(void);
@@ -69,30 +73,44 @@ const struct gpio_bank *const omap_gpio_bank = gpio_bank_34xx;
 u32 omap3_boot_device = BOOT_DEVICE_NAND;
 
 /* auto boot mode detection is not possible for OMAP3 - hard code */
-u32 omap_boot_mode(void)
+u32 spl_boot_mode(void)
 {
-	switch (omap_boot_device()) {
+	switch (spl_boot_device()) {
 	case BOOT_DEVICE_MMC2:
 		return MMCSD_MODE_RAW;
 	case BOOT_DEVICE_MMC1:
 		return MMCSD_MODE_FAT;
 		break;
-	case BOOT_DEVICE_NAND:
-		return NAND_MODE_HW_ECC;
-		break;
 	default:
 		puts("spl: ERROR:  unknown device - can't select boot mode\n");
 		hang();
 	}
 }
 
-u32 omap_boot_device(void)
+u32 spl_boot_device(void)
 {
 	return omap3_boot_device;
 }
 
+int board_mmc_init(bd_t *bis)
+{
+	switch (spl_boot_device()) {
+	case BOOT_DEVICE_MMC1:
+		omap_mmc_init(0, 0, 0);
+		break;
+	case BOOT_DEVICE_MMC2:
+	case BOOT_DEVICE_MMC2_2:
+		omap_mmc_init(1, 0, 0);
+		break;
+	}
+	return 0;
+}
+
 void spl_board_init(void)
 {
+#ifdef CONFIG_SPL_NAND_SUPPORT
+	gpmc_init();
+#endif
 #ifdef CONFIG_SPL_I2C_SUPPORT
 	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
 #endif
@@ -236,6 +254,8 @@ void s_init(void)
 #endif
 
 #ifdef CONFIG_SPL_BUILD
+	gd = &gdata;
+
 	preloader_console_init();
 
 	timer_init();
diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S
index 32658eb7a5..f26308df16 100644
--- a/arch/arm/cpu/armv7/start.S
+++ b/arch/arm/cpu/armv7/start.S
@@ -164,6 +164,7 @@ call_board_init_f:
 
 /*------------------------------------------------------------------------------*/
 
+#ifndef CONFIG_SPL_BUILD
 /*
  * void relocate_code (addr_sp, gd, addr_moni)
  *
@@ -194,7 +195,6 @@ copy_loop:
 	cmp	r0, r2			/* until source end address [r2]    */
 	blo	copy_loop
 
-#ifndef CONFIG_SPL_BUILD
 	/*
 	 * fix .rel.dyn relocations
 	 */
@@ -241,20 +241,12 @@ _rel_dyn_end_ofs:
 _dynsym_start_ofs:
 	.word __dynsym_start - _start
 
-#endif	/* #ifndef CONFIG_SPL_BUILD */
-
 clear_bss:
-#ifdef CONFIG_SPL_BUILD
-	/* No relocation for SPL */
-	ldr	r0, =__bss_start
-	ldr	r1, =__bss_end__
-#else
 	ldr	r0, _bss_start_ofs
 	ldr	r1, _bss_end_ofs
 	mov	r4, r6			/* reloc addr */
 	add	r0, r0, r4
 	add	r1, r1, r4
-#endif
 	mov	r2, #0x00000000		/* clear			    */
 
 clbss_l:cmp	r0, r1			/* clear loop... */
@@ -281,12 +273,10 @@ jump_2_ram:
  * Move vector table
  */
 #if !defined(CONFIG_TEGRA20)
-#if !(defined(CONFIG_OMAP44XX) && defined(CONFIG_SPL_BUILD))
 	/* Set vector address in CP15 VBAR register */
 	ldr     r0, =_start
 	add     r0, r0, r9
 	mcr     p15, 0, r0, c12, c0, 0  @Set VBAR
-#endif
 #endif /* !Tegra20 */
 
 	ldr	r0, _board_init_r_ofs
@@ -302,6 +292,7 @@ jump_2_ram:
 _board_init_r_ofs:
 	.word board_init_r - _start
 ENDPROC(relocate_code)
+#endif
 
 /*************************************************************************
  *