Merge branch 'master' of git://git.denx.de/u-boot-arm

Bringing in the MMC tree means that CONFIG_BOUNCE_BUFFER needed to be
added to include/configs/exynos5-dt.h now.

Conflicts:
	include/configs/exynos5250-dt.h

Signed-off-by: Tom Rini <trini@ti.com>

20 files changed, 2250 insertions, 329 deletions

diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c
index 803aa9c545..c7dad6681d 100644
--- a/arch/arm/cpu/armv7/am33xx/board.c
+++ b/arch/arm/cpu/armv7/am33xx/board.c
@@ -241,3 +241,11 @@ void s_init(void)
 	sdram_init();
 #endif
 }
+
+#ifndef CONFIG_SYS_DCACHE_OFF
+void enable_caches(void)
+{
+	/* Enable D-cache. I-cache is already enabled in start.S */
+	dcache_enable();
+}
+#endif /* !CONFIG_SYS_DCACHE_OFF */
diff --git a/arch/arm/cpu/armv7/am33xx/clock.c b/arch/arm/cpu/armv7/am33xx/clock.c
index 8e5f3c6715..0672798fe0 100644
--- a/arch/arm/cpu/armv7/am33xx/clock.c
+++ b/arch/arm/cpu/armv7/am33xx/clock.c
@@ -101,9 +101,15 @@ void do_setup_dpll(const struct dpll_regs *dpll_regs,
 static void setup_dplls(void)
 {
 	const struct dpll_params *params;
-	do_setup_dpll(&dpll_core_regs, &dpll_core);
-	do_setup_dpll(&dpll_mpu_regs, &dpll_mpu);
-	do_setup_dpll(&dpll_per_regs, &dpll_per);
+
+	params = get_dpll_core_params();
+	do_setup_dpll(&dpll_core_regs, params);
+
+	params = get_dpll_mpu_params();
+	do_setup_dpll(&dpll_mpu_regs, params);
+
+	params = get_dpll_per_params();
+	do_setup_dpll(&dpll_per_regs, params);
 	writel(0x300, &cmwkup->clkdcoldodpllper);
 
 	params = get_dpll_ddr_params();
diff --git a/arch/arm/cpu/armv7/am33xx/clock_am33xx.c b/arch/arm/cpu/armv7/am33xx/clock_am33xx.c
index fabe2595a3..92142c8934 100644
--- a/arch/arm/cpu/armv7/am33xx/clock_am33xx.c
+++ b/arch/arm/cpu/armv7/am33xx/clock_am33xx.c
@@ -62,6 +62,21 @@ const struct dpll_params dpll_core = {
 const struct dpll_params dpll_per = {
 		960, OSC-1, 5, -1, -1, -1, -1};
 
+const struct dpll_params *get_dpll_mpu_params(void)
+{
+	return &dpll_mpu;
+}
+
+const struct dpll_params *get_dpll_core_params(void)
+{
+	return &dpll_core;
+}
+
+const struct dpll_params *get_dpll_per_params(void)
+{
+	return &dpll_per;
+}
+
 void setup_clocks_for_console(void)
 {
 	clrsetbits_le32(&cmwkup->wkclkstctrl, CD_CLKCTRL_CLKTRCTRL_MASK,
diff --git a/arch/arm/cpu/armv7/am33xx/clock_am43xx.c b/arch/arm/cpu/armv7/am33xx/clock_am43xx.c
index c4890f2b43..97c00b4925 100644
--- a/arch/arm/cpu/armv7/am33xx/clock_am43xx.c
+++ b/arch/arm/cpu/armv7/am33xx/clock_am43xx.c
@@ -18,6 +18,7 @@
 
 struct cm_perpll *const cmper = (struct cm_perpll *)CM_PER;
 struct cm_wkuppll *const cmwkup = (struct cm_wkuppll *)CM_WKUP;
+struct cm_dpll *const cmdpll = (struct cm_dpll *)CM_DPLL;
 
 const struct dpll_regs dpll_mpu_regs = {
 	.cm_clkmode_dpll	= CM_WKUP + 0x560,
@@ -47,15 +48,9 @@ const struct dpll_regs dpll_ddr_regs = {
 	.cm_idlest_dpll		= CM_WKUP + 0x5A4,
 	.cm_clksel_dpll		= CM_WKUP + 0x5AC,
 	.cm_div_m2_dpll		= CM_WKUP + 0x5B0,
+	.cm_div_m4_dpll		= CM_WKUP + 0x5B8,
 };
 
-const struct dpll_params dpll_mpu = {
-		-1, -1, -1, -1, -1, -1, -1};
-const struct dpll_params dpll_core = {
-		-1, -1, -1, -1, -1, -1, -1};
-const struct dpll_params dpll_per = {
-		-1, -1, -1, -1, -1, -1, -1};
-
 void setup_clocks_for_console(void)
 {
 	/* Do not add any spl_debug prints in this function */
@@ -107,4 +102,7 @@ void enable_basic_clocks(void)
 	};
 
 	do_enable_clocks(clk_domains, clk_modules_explicit_en, 1);
+
+	/* Select the Master osc clk as Timer2 clock source */
+	writel(0x1, &cmdpll->clktimer2clk);
 }
diff --git a/arch/arm/cpu/armv7/am33xx/ddr.c b/arch/arm/cpu/armv7/am33xx/ddr.c
index 5b0454c3ea..d05e666a74 100644
--- a/arch/arm/cpu/armv7/am33xx/ddr.c
+++ b/arch/arm/cpu/armv7/am33xx/ddr.c
@@ -36,6 +36,73 @@ static struct ddr_data_regs *ddr_data_reg[2] = {
 static struct ddr_cmdtctrl *ioctrl_reg = {
 			(struct ddr_cmdtctrl *)DDR_CONTROL_BASE_ADDR};
 
+static inline u32 get_mr(int nr, u32 cs, u32 mr_addr)
+{
+	u32 mr;
+
+	mr_addr |= cs << EMIF_REG_CS_SHIFT;
+	writel(mr_addr, &emif_reg[nr]->emif_lpddr2_mode_reg_cfg);
+
+	mr = readl(&emif_reg[nr]->emif_lpddr2_mode_reg_data);
+	debug("get_mr: EMIF1 cs %d mr %08x val 0x%x\n", cs, mr_addr, mr);
+	if (((mr & 0x0000ff00) >>  8) == (mr & 0xff) &&
+	    ((mr & 0x00ff0000) >> 16) == (mr & 0xff) &&
+	    ((mr & 0xff000000) >> 24) == (mr & 0xff))
+		return mr & 0xff;
+	else
+		return mr;
+}
+
+static inline void set_mr(int nr, u32 cs, u32 mr_addr, u32 mr_val)
+{
+	mr_addr |= cs << EMIF_REG_CS_SHIFT;
+	writel(mr_addr, &emif_reg[nr]->emif_lpddr2_mode_reg_cfg);
+	writel(mr_val, &emif_reg[nr]->emif_lpddr2_mode_reg_data);
+}
+
+static void configure_mr(int nr, u32 cs)
+{
+	u32 mr_addr;
+
+	while (get_mr(nr, cs, LPDDR2_MR0) & LPDDR2_MR0_DAI_MASK)
+		;
+	set_mr(nr, cs, LPDDR2_MR10, 0x56);
+
+	set_mr(nr, cs, LPDDR2_MR1, 0x43);
+	set_mr(nr, cs, LPDDR2_MR2, 0x2);
+
+	mr_addr = LPDDR2_MR2 | EMIF_REG_REFRESH_EN_MASK;
+	set_mr(nr, cs, mr_addr, 0x2);
+}
+
+/*
+ * Configure EMIF4D5 registers and MR registers
+ */
+void config_sdram_emif4d5(const struct emif_regs *regs, int nr)
+{
+	writel(0x0, &emif_reg[nr]->emif_pwr_mgmt_ctrl);
+	writel(0x0, &emif_reg[nr]->emif_pwr_mgmt_ctrl_shdw);
+	writel(0x1, &emif_reg[nr]->emif_iodft_tlgc);
+	writel(regs->zq_config, &emif_reg[nr]->emif_zq_config);
+
+	writel(regs->temp_alert_config, &emif_reg[nr]->emif_temp_alert_config);
+	writel(regs->emif_rd_wr_lvl_rmp_win,
+	       &emif_reg[nr]->emif_rd_wr_lvl_rmp_win);
+	writel(regs->emif_rd_wr_lvl_rmp_ctl,
+	       &emif_reg[nr]->emif_rd_wr_lvl_rmp_ctl);
+	writel(regs->emif_rd_wr_lvl_ctl, &emif_reg[nr]->emif_rd_wr_lvl_ctl);
+	writel(regs->emif_rd_wr_exec_thresh,
+	       &emif_reg[nr]->emif_rd_wr_exec_thresh);
+
+	writel(regs->ref_ctrl, &emif_reg[nr]->emif_sdram_ref_ctrl);
+	writel(regs->sdram_config, &emif_reg[nr]->emif_sdram_config);
+
+	if (emif_sdram_type() == EMIF_SDRAM_TYPE_LPDDR2) {
+		configure_mr(nr, 0);
+		configure_mr(nr, 1);
+	}
+}
+
 /**
  * Configure SDRAM
  */
@@ -72,15 +139,67 @@ void set_sdram_timings(const struct emif_regs *regs, int nr)
 	writel(regs->sdram_tim3, &emif_reg[nr]->emif_sdram_tim_3_shdw);
 }
 
+void __weak emif_get_ext_phy_ctrl_const_regs(const u32 **regs, u32 *size)
+{
+}
+
+/*
+ * Configure EXT PHY registers
+ */
+static void ext_phy_settings(const struct emif_regs *regs, int nr)
+{
+	u32 *ext_phy_ctrl_base = 0;
+	u32 *emif_ext_phy_ctrl_base = 0;
+	const u32 *ext_phy_ctrl_const_regs;
+	u32 i = 0;
+	u32 size;
+
+	ext_phy_ctrl_base = (u32 *)&(regs->emif_ddr_ext_phy_ctrl_1);
+	emif_ext_phy_ctrl_base =
+			(u32 *)&(emif_reg[nr]->emif_ddr_ext_phy_ctrl_1);
+
+	/* Configure external phy control timing registers */
+	for (i = 0; i < EMIF_EXT_PHY_CTRL_TIMING_REG; i++) {
+		writel(*ext_phy_ctrl_base, emif_ext_phy_ctrl_base++);
+		/* Update shadow registers */
+		writel(*ext_phy_ctrl_base++, emif_ext_phy_ctrl_base++);
+	}
+
+	/*
+	 * external phy 6-24 registers do not change with
+	 * ddr frequency
+	 */
+	emif_get_ext_phy_ctrl_const_regs(&ext_phy_ctrl_const_regs, &size);
+
+	if (!size)
+		return;
+
+	for (i = 0; i < size; i++) {
+		writel(ext_phy_ctrl_const_regs[i], emif_ext_phy_ctrl_base++);
+		/* Update shadow registers */
+		writel(ext_phy_ctrl_const_regs[i], emif_ext_phy_ctrl_base++);
+	}
+}
+
 /**
  * Configure DDR PHY
  */
 void config_ddr_phy(const struct emif_regs *regs, int nr)
 {
+	/*
+	 * disable initialization and refreshes for now until we
+	 * finish programming EMIF regs.
+	 */
+	setbits_le32(&emif_reg[nr]->emif_sdram_ref_ctrl,
+		     EMIF_REG_INITREF_DIS_MASK);
+
 	writel(regs->emif_ddr_phy_ctlr_1,
 		&emif_reg[nr]->emif_ddr_phy_ctrl_1);
 	writel(regs->emif_ddr_phy_ctlr_1,
 		&emif_reg[nr]->emif_ddr_phy_ctrl_1_shdw);
+
+	if (get_emif_rev((u32)emif_reg[nr]) == EMIF_4D5)
+		ext_phy_settings(regs, nr);
 }
 
 /**
@@ -88,6 +207,9 @@ void config_ddr_phy(const struct emif_regs *regs, int nr)
  */
 void config_cmd_ctrl(const struct cmd_control *cmd, int nr)
 {
+	if (!cmd)
+		return;
+
 	writel(cmd->cmd0csratio, &ddr_cmd_reg[nr]->cm0csratio);
 	writel(cmd->cmd0iclkout, &ddr_cmd_reg[nr]->cm0iclkout);
 
@@ -105,6 +227,9 @@ void config_ddr_data(const struct ddr_data *data, int nr)
 {
 	int i;
 
+	if (!data)
+		return;
+
 	for (i = 0; i < DDR_DATA_REGS_NR; i++) {
 		writel(data->datardsratio0,
 			&(ddr_data_reg[nr]+i)->dt0rdsratio0);
@@ -121,11 +246,20 @@ void config_ddr_data(const struct ddr_data *data, int nr)
 	}
 }
 
-void config_io_ctrl(unsigned long val)
+void config_io_ctrl(const struct ctrl_ioregs *ioregs)
 {
-	writel(val, &ioctrl_reg->cm0ioctl);
-	writel(val, &ioctrl_reg->cm1ioctl);
-	writel(val, &ioctrl_reg->cm2ioctl);
-	writel(val, &ioctrl_reg->dt0ioctl);
-	writel(val, &ioctrl_reg->dt1ioctl);
+	if (!ioregs)
+		return;
+
+	writel(ioregs->cm0ioctl, &ioctrl_reg->cm0ioctl);
+	writel(ioregs->cm1ioctl, &ioctrl_reg->cm1ioctl);
+	writel(ioregs->cm2ioctl, &ioctrl_reg->cm2ioctl);
+	writel(ioregs->dt0ioctl, &ioctrl_reg->dt0ioctl);
+	writel(ioregs->dt1ioctl, &ioctrl_reg->dt1ioctl);
+#ifdef CONFIG_AM43XX
+	writel(ioregs->dt2ioctrl, &ioctrl_reg->dt2ioctrl);
+	writel(ioregs->dt3ioctrl, &ioctrl_reg->dt3ioctrl);
+	writel(ioregs->emif_sdram_config_ext,
+	       &ioctrl_reg->emif_sdram_config_ext);
+#endif
 }
diff --git a/arch/arm/cpu/armv7/am33xx/emif4.c b/arch/arm/cpu/armv7/am33xx/emif4.c
index 59ad25c5b0..d28fceb75c 100644
--- a/arch/arm/cpu/armv7/am33xx/emif4.c
+++ b/arch/arm/cpu/armv7/am33xx/emif4.c
@@ -48,6 +48,11 @@ static struct vtp_reg *vtpreg[2] = {
 #ifdef CONFIG_AM33XX
 static struct ddr_ctrl *ddrctrl = (struct ddr_ctrl *)DDR_CTRL_ADDR;
 #endif
+#ifdef CONFIG_AM43XX
+static struct ddr_ctrl *ddrctrl = (struct ddr_ctrl *)DDR_CTRL_ADDR;
+static struct cm_device_inst *cm_device =
+				(struct cm_device_inst *)CM_DEVICE_INST;
+#endif
 
 #ifdef CONFIG_TI81XX
 void config_dmm(const struct dmm_lisa_map_regs *regs)
@@ -87,7 +92,7 @@ void __weak ddr_pll_config(unsigned int ddrpll_m)
 {
 }
 
-void config_ddr(unsigned int pll, unsigned int ioctrl,
+void config_ddr(unsigned int pll, const struct ctrl_ioregs *ioregs,
 		const struct ddr_data *data, const struct cmd_control *ctrl,
 		const struct emif_regs *regs, int nr)
 {
@@ -99,7 +104,18 @@ void config_ddr(unsigned int pll, unsigned int ioctrl,
 
 	config_ddr_data(data, nr);
 #ifdef CONFIG_AM33XX
-	config_io_ctrl(ioctrl);
+	config_io_ctrl(ioregs);
+
+	/* Set CKE to be controlled by EMIF/DDR PHY */
+	writel(DDR_CKE_CTRL_NORMAL, &ddrctrl->ddrckectrl);
+#endif
+#ifdef CONFIG_AM43XX
+	writel(readl(&cm_device->cm_dll_ctrl) & ~0x1, &cm_device->cm_dll_ctrl);
+	while ((readl(&cm_device->cm_dll_ctrl) && CM_DLL_READYST) == 0)
+		;
+	writel(0x0, &ddrctrl->ddrioctrl);
+
+	config_io_ctrl(ioregs);
 
 	/* Set CKE to be controlled by EMIF/DDR PHY */
 	writel(DDR_CKE_CTRL_NORMAL, &ddrctrl->ddrckectrl);
@@ -108,6 +124,9 @@ void config_ddr(unsigned int pll, unsigned int ioctrl,
 	/* Program EMIF instance */
 	config_ddr_phy(regs, nr);
 	set_sdram_timings(regs, nr);
-	config_sdram(regs, nr);
+	if (get_emif_rev(EMIF1_BASE) == EMIF_4D5)
+		config_sdram_emif4d5(regs, nr);
+	else
+		config_sdram(regs, nr);
 }
 #endif
diff --git a/arch/arm/cpu/armv7/exynos/clock.c b/arch/arm/cpu/armv7/exynos/clock.c
index 84a50470aa..5bde9d180b 100644
--- a/arch/arm/cpu/armv7/exynos/clock.c
+++ b/arch/arm/cpu/armv7/exynos/clock.c
@@ -96,7 +96,7 @@ static int exynos_get_pll_clk(int pllreg, unsigned int r, unsigned int k)
 
 	freq = CONFIG_SYS_CLK_FREQ;
 
-	if (pllreg == EPLL) {
+	if (pllreg == EPLL || pllreg == RPLL) {
 		k = k & 0xffff;
 		/* FOUT = (MDIV + K / 65536) * FIN / (PDIV * 2^SDIV) */
 		fout = (m + k / PLL_DIV_65536) * (freq / (p * (1 << s)));
@@ -117,7 +117,7 @@ static int exynos_get_pll_clk(int pllreg, unsigned int r, unsigned int k)
 			div = PLL_DIV_1024;
 		else if (proid_is_exynos4412())
 			div = PLL_DIV_65535;
-		else if (proid_is_exynos5250())
+		else if (proid_is_exynos5250() || proid_is_exynos5420())
 			div = PLL_DIV_65536;
 		else
 			return 0;
@@ -362,6 +362,43 @@ unsigned long clock_get_periph_rate(int peripheral)
 		return 0;
 }
 
+/* exynos5420: return pll clock frequency */
+static unsigned long exynos5420_get_pll_clk(int pllreg)
+{
+	struct exynos5420_clock *clk =
+		(struct exynos5420_clock *)samsung_get_base_clock();
+	unsigned long r, k = 0;
+
+	switch (pllreg) {
+	case APLL:
+		r = readl(&clk->apll_con0);
+		break;
+	case MPLL:
+		r = readl(&clk->mpll_con0);
+		break;
+	case EPLL:
+		r = readl(&clk->epll_con0);
+		k = readl(&clk->epll_con1);
+		break;
+	case VPLL:
+		r = readl(&clk->vpll_con0);
+		k = readl(&clk->vpll_con1);
+		break;
+	case BPLL:
+		r = readl(&clk->bpll_con0);
+		break;
+	case RPLL:
+		r = readl(&clk->rpll_con0);
+		k = readl(&clk->rpll_con1);
+		break;
+	default:
+		printf("Unsupported PLL (%d)\n", pllreg);
+		return 0;
+	}
+
+	return exynos_get_pll_clk(pllreg, r, k);
+}
+
 /* exynos4: return ARM clock frequency */
 static unsigned long exynos4_get_arm_clk(void)
 {
@@ -485,6 +522,27 @@ static unsigned long exynos4x12_get_pwm_clk(void)
 	return pclk;
 }
 
+/* exynos5420: return pwm clock frequency */
+static unsigned long exynos5420_get_pwm_clk(void)
+{
+	struct exynos5420_clock *clk =
+		(struct exynos5420_clock *)samsung_get_base_clock();
+	unsigned long pclk, sclk;
+	unsigned int ratio;
+
+	/*
+	 * CLK_DIV_PERIC0
+	 * PWM_RATIO [31:28]
+	 */
+	ratio = readl(&clk->div_peric0);
+	ratio = (ratio >> 28) & 0xf;
+	sclk = get_pll_clk(MPLL);
+
+	pclk = sclk / (ratio + 1);
+
+	return pclk;
+}
+
 /* exynos4: return uart clock frequency */
 static unsigned long exynos4_get_uart_clk(int dev_index)
 {
@@ -624,6 +682,53 @@ static unsigned long exynos5_get_uart_clk(int dev_index)
 	return uclk;
 }
 
+/* exynos5420: return uart clock frequency */
+static unsigned long exynos5420_get_uart_clk(int dev_index)
+{
+	struct exynos5420_clock *clk =
+		(struct exynos5420_clock *)samsung_get_base_clock();
+	unsigned long uclk, sclk;
+	unsigned int sel;
+	unsigned int ratio;
+
+	/*
+	 * CLK_SRC_PERIC0
+	 * UART0_SEL [6:4]
+	 * UART1_SEL [10:8]
+	 * UART2_SEL [14:12]
+	 * UART3_SEL [18:16]
+	 * generalised calculation as follows
+	 * sel = (sel >> ((dev_index * 4) + 4)) & mask;
+	 */
+	sel = readl(&clk->src_peric0);
+	sel = (sel >> ((dev_index * 4) + 4)) & 0x7;
+
+	if (sel == 0x3)
+		sclk = get_pll_clk(MPLL);
+	else if (sel == 0x6)
+		sclk = get_pll_clk(EPLL);
+	else if (sel == 0x7)
+		sclk = get_pll_clk(RPLL);
+	else
+		return 0;
+
+	/*
+	 * CLK_DIV_PERIC0
+	 * UART0_RATIO [11:8]
+	 * UART1_RATIO [15:12]
+	 * UART2_RATIO [19:16]
+	 * UART3_RATIO [23:20]
+	 * generalised calculation as follows
+	 * ratio = (ratio >> ((dev_index * 4) + 8)) & mask;
+	 */
+	ratio = readl(&clk->div_peric0);
+	ratio = (ratio >> ((dev_index * 4) + 8)) & 0xf;
+
+	uclk = sclk / (ratio + 1);
+
+	return uclk;
+}
+
 static unsigned long exynos4_get_mmc_clk(int dev_index)
 {
 	struct exynos4_clock *clk =
@@ -718,6 +823,47 @@ static unsigned long exynos5_get_mmc_clk(int dev_index)
 	return uclk;
 }
 
+static unsigned long exynos5420_get_mmc_clk(int dev_index)
+{
+	struct exynos5420_clock *clk =
+		(struct exynos5420_clock *)samsung_get_base_clock();
+	unsigned long uclk, sclk;
+	unsigned int sel, ratio;
+
+	/*
+	 * CLK_SRC_FSYS
+	 * MMC0_SEL [10:8]
+	 * MMC1_SEL [14:12]
+	 * MMC2_SEL [18:16]
+	 * generalised calculation as follows
+	 * sel = (sel >> ((dev_index * 4) + 8)) & mask
+	 */
+	sel = readl(&clk->src_fsys);
+	sel = (sel >> ((dev_index * 4) + 8)) & 0x7;
+
+	if (sel == 0x3)
+		sclk = get_pll_clk(MPLL);
+	else if (sel == 0x6)
+		sclk = get_pll_clk(EPLL);
+	else
+		return 0;
+
+	/*
+	 * CLK_DIV_FSYS1
+	 * MMC0_RATIO [9:0]
+	 * MMC1_RATIO [19:10]
+	 * MMC2_RATIO [29:20]
+	 * generalised calculation as follows
+	 * ratio = (ratio >> (dev_index * 10)) & mask
+	 */
+	ratio = readl(&clk->div_fsys1);
+	ratio = (ratio >> (dev_index * 10)) & 0x3ff;
+
+	uclk = (sclk / (ratio + 1));
+
+	return uclk;
+}
+
 /* exynos4: set the mmc clock */
 static void exynos4_set_mmc_clk(int dev_index, unsigned int div)
 {
@@ -804,6 +950,29 @@ static void exynos5_set_mmc_clk(int dev_index, unsigned int div)
 	writel(val, addr);
 }
 
+/* exynos5: set the mmc clock */
+static void exynos5420_set_mmc_clk(int dev_index, unsigned int div)
+{
+	struct exynos5420_clock *clk =
+		(struct exynos5420_clock *)samsung_get_base_clock();
+	unsigned int addr;
+	unsigned int val, shift;
+
+	/*
+	 * CLK_DIV_FSYS1
+	 * MMC0_RATIO [9:0]
+	 * MMC1_RATIO [19:10]
+	 * MMC2_RATIO [29:20]
+	 */
+	addr = (unsigned int)&clk->div_fsys1;
+	shift = dev_index * 10;
+
+	val = readl(addr);
+	val &= ~(0x3ff << shift);
+	val |= (div & 0x3ff) << shift;
+	writel(val, addr);
+}
+
 /* get_lcd_clk: return lcd clock frequency */
 static unsigned long exynos4_get_lcd_clk(void)
 {
@@ -1324,6 +1493,71 @@ static int exynos5_set_spi_clk(enum periph_id periph_id,
 	return 0;
 }
 
+static int exynos5420_set_spi_clk(enum periph_id periph_id,
+					unsigned int rate)
+{
+	struct exynos5420_clock *clk =
+		(struct exynos5420_clock *)samsung_get_base_clock();
+	int main;
+	unsigned int fine;
+	unsigned shift, pre_shift;
+	unsigned div_mask = 0xf, pre_div_mask = 0xff;
+	u32 *reg;
+	u32 *pre_reg;
+
+	main = clock_calc_best_scalar(4, 8, 400000000, rate, &fine);
+	if (main < 0) {
+		debug("%s: Cannot set clock rate for periph %d",
+		      __func__, periph_id);
+		return -1;
+	}
+	main = main - 1;
+	fine = fine - 1;
+
+	switch (periph_id) {
+	case PERIPH_ID_SPI0:
+		reg = &clk->div_peric1;
+		shift = 20;
+		pre_reg = &clk->div_peric4;
+		pre_shift = 8;
+		break;
+	case PERIPH_ID_SPI1:
+		reg = &clk->div_peric1;
+		shift = 24;
+		pre_reg = &clk->div_peric4;
+		pre_shift = 16;
+		break;
+	case PERIPH_ID_SPI2:
+		reg = &clk->div_peric1;
+		shift = 28;
+		pre_reg = &clk->div_peric4;
+		pre_shift = 24;
+		break;
+	case PERIPH_ID_SPI3:
+		reg = &clk->div_isp1;
+		shift = 16;
+		pre_reg = &clk->div_isp1;
+		pre_shift = 0;
+		break;
+	case PERIPH_ID_SPI4:
+		reg = &clk->div_isp1;
+		shift = 20;
+		pre_reg = &clk->div_isp1;
+		pre_shift = 8;
+		break;
+	default:
+		debug("%s: Unsupported peripheral ID %d\n", __func__,
+		      periph_id);
+		return -1;
+	}
+
+	clrsetbits_le32(reg, div_mask << shift, (main & div_mask) << shift);
+	clrsetbits_le32(pre_reg, pre_div_mask << pre_shift,
+			(fine & pre_div_mask) << pre_shift);
+
+	return 0;
+}
+
 static unsigned long exynos4_get_i2c_clk(void)
 {
 	struct exynos4_clock *clk =
@@ -1341,9 +1575,11 @@ static unsigned long exynos4_get_i2c_clk(void)
 
 unsigned long get_pll_clk(int pllreg)
 {
-	if (cpu_is_exynos5())
+	if (cpu_is_exynos5()) {
+		if (proid_is_exynos5420())
+			return exynos5420_get_pll_clk(pllreg);
 		return exynos5_get_pll_clk(pllreg);
-	else {
+	} else {
 		if (proid_is_exynos4412())
 			return exynos4x12_get_pll_clk(pllreg);
 		return exynos4_get_pll_clk(pllreg);
@@ -1375,9 +1611,11 @@ unsigned long get_i2c_clk(void)
 
 unsigned long get_pwm_clk(void)
 {
-	if (cpu_is_exynos5())
+	if (cpu_is_exynos5()) {
+		if (proid_is_exynos5420())
+			return exynos5420_get_pwm_clk();
 		return clock_get_periph_rate(PERIPH_ID_PWM0);
-	else {
+	} else {
 		if (proid_is_exynos4412())
 			return exynos4x12_get_pwm_clk();
 		return exynos4_get_pwm_clk();
@@ -1386,9 +1624,11 @@ unsigned long get_pwm_clk(void)
 
 unsigned long get_uart_clk(int dev_index)
 {
-	if (cpu_is_exynos5())
+	if (cpu_is_exynos5()) {
+		if (proid_is_exynos5420())
+			return exynos5420_get_uart_clk(dev_index);
 		return exynos5_get_uart_clk(dev_index);
-	else {
+	} else {
 		if (proid_is_exynos4412())
 			return exynos4x12_get_uart_clk(dev_index);
 		return exynos4_get_uart_clk(dev_index);
@@ -1397,17 +1637,23 @@ unsigned long get_uart_clk(int dev_index)
 
 unsigned long get_mmc_clk(int dev_index)
 {
-	if (cpu_is_exynos5())
+	if (cpu_is_exynos5()) {
+		if (proid_is_exynos5420())
+			return exynos5420_get_mmc_clk(dev_index);
 		return exynos5_get_mmc_clk(dev_index);
-	else
+	} else {
 		return exynos4_get_mmc_clk(dev_index);
+	}
 }
 
 void set_mmc_clk(int dev_index, unsigned int div)
 {
-	if (cpu_is_exynos5())
-		exynos5_set_mmc_clk(dev_index, div);
-	else {
+	if (cpu_is_exynos5()) {
+		if (proid_is_exynos5420())
+			exynos5420_set_mmc_clk(dev_index, div);
+		else
+			exynos5_set_mmc_clk(dev_index, div);
+	} else {
 		if (proid_is_exynos4412())
 			exynos4x12_set_mmc_clk(dev_index, div);
 		else
@@ -1439,10 +1685,13 @@ void set_mipi_clk(void)
 
 int set_spi_clk(int periph_id, unsigned int rate)
 {
-	if (cpu_is_exynos5())
+	if (cpu_is_exynos5()) {
+		if (proid_is_exynos5420())
+			return exynos5420_set_spi_clk(periph_id, rate);
 		return exynos5_set_spi_clk(periph_id, rate);
-	else
+	} else {
 		return 0;
+	}
 }
 
 int set_i2s_clk_prescaler(unsigned int src_frq, unsigned int dst_frq,
diff --git a/arch/arm/cpu/armv7/exynos/clock_init.h b/arch/arm/cpu/armv7/exynos/clock_init.h
index c28ff3ab14..a875d0b48f 100644
--- a/arch/arm/cpu/armv7/exynos/clock_init.h
+++ b/arch/arm/cpu/armv7/exynos/clock_init.h
@@ -10,7 +10,11 @@
 #define __EXYNOS_CLOCK_INIT_H
 
 enum {
+#ifdef CONFIG_EXYNOS5420
+	MEM_TIMINGS_MSR_COUNT	= 5,
+#else
 	MEM_TIMINGS_MSR_COUNT	= 4,
+#endif
 };
 
 /* These are the ratio's for configuring ARM clock */
@@ -59,6 +63,18 @@ struct mem_timings {
 	unsigned bpll_mdiv;
 	unsigned bpll_pdiv;
 	unsigned bpll_sdiv;
+	unsigned kpll_mdiv;
+	unsigned kpll_pdiv;
+	unsigned kpll_sdiv;
+	unsigned dpll_mdiv;
+	unsigned dpll_pdiv;
+	unsigned dpll_sdiv;
+	unsigned ipll_mdiv;
+	unsigned ipll_pdiv;
+	unsigned ipll_sdiv;
+	unsigned spll_mdiv;
+	unsigned spll_pdiv;
+	unsigned spll_sdiv;
 	unsigned pclk_cdrex_ratio;
 	unsigned direct_cmd_msr[MEM_TIMINGS_MSR_COUNT];
 
@@ -115,6 +131,7 @@ struct mem_timings {
 	uint8_t send_zq_init;		/* 1 to send this command */
 	unsigned impedance;		/* drive strength impedeance */
 	uint8_t gate_leveling_enable;	/* check gate leveling is enabled */
+	uint8_t read_leveling_enable;	/* check h/w read leveling is enabled */
 };
 
 /**
diff --git a/arch/arm/cpu/armv7/exynos/clock_init_exynos5.c b/arch/arm/cpu/armv7/exynos/clock_init_exynos5.c
index a24c2f3875..1d6977fa43 100644
--- a/arch/arm/cpu/armv7/exynos/clock_init_exynos5.c
+++ b/arch/arm/cpu/armv7/exynos/clock_init_exynos5.c
@@ -24,6 +24,24 @@
 DECLARE_GLOBAL_DATA_PTR;
 
 struct arm_clk_ratios arm_clk_ratios[] = {
+#ifdef CONFIG_EXYNOS5420
+	{
+		.arm_freq_mhz = 900,
+
+		.apll_mdiv = 0x96,
+		.apll_pdiv = 0x2,
+		.apll_sdiv = 0x1,
+
+		.arm2_ratio = 0x0,
+		.apll_ratio = 0x3,
+		.pclk_dbg_ratio = 0x6,
+		.atb_ratio = 0x6,
+		.periph_ratio = 0x7,
+		.acp_ratio = 0x0,
+		.cpud_ratio = 0x2,
+		.arm_ratio = 0x0,
+	}
+#else
 	{
 		.arm_freq_mhz = 600,
 
@@ -115,8 +133,133 @@ struct arm_clk_ratios arm_clk_ratios[] = {
 		.cpud_ratio = 0x3,
 		.arm_ratio = 0x0,
 	}
+#endif
 };
+
 struct mem_timings mem_timings[] = {
+#ifdef CONFIG_EXYNOS5420
+	{
+		.mem_manuf = MEM_MANUF_SAMSUNG,
+		.mem_type = DDR_MODE_DDR3,
+		.frequency_mhz = 800,
+
+		/* MPLL @800MHz*/
+		.mpll_mdiv = 0xc8,
+		.mpll_pdiv = 0x3,
+		.mpll_sdiv = 0x1,
+		/* CPLL @666MHz */
+		.cpll_mdiv = 0xde,
+		.cpll_pdiv = 0x4,
+		.cpll_sdiv = 0x1,
+		/* EPLL @600MHz */
+		.epll_mdiv = 0x64,
+		.epll_pdiv = 0x2,
+		.epll_sdiv = 0x1,
+		/* VPLL @430MHz */
+		.vpll_mdiv = 0xd7,
+		.vpll_pdiv = 0x3,
+		.vpll_sdiv = 0x2,
+		/* BPLL @800MHz */
+		.bpll_mdiv = 0xc8,
+		.bpll_pdiv = 0x3,
+		.bpll_sdiv = 0x1,
+		/* KPLL @600MHz */
+		.kpll_mdiv = 0x190,
+		.kpll_pdiv = 0x4,
+		.kpll_sdiv = 0x2,
+		/* DPLL @600MHz */
+		.dpll_mdiv = 0x190,
+		.dpll_pdiv = 0x4,
+		.dpll_sdiv = 0x2,
+		/* IPLL @370MHz */
+		.ipll_mdiv = 0xb9,
+		.ipll_pdiv = 0x3,
+		.ipll_sdiv = 0x2,
+		/* SPLL @400MHz */
+		.spll_mdiv = 0xc8,
+		.spll_pdiv = 0x3,
+		.spll_sdiv = 0x2,
+
+		.direct_cmd_msr = {
+			0x00020018, 0x00030000, 0x00010046, 0x00000d70,
+			0x00000c70
+		},
+		.timing_ref = 0x000000bb,
+		.timing_row = 0x6836650f,
+		.timing_data = 0x3630580b,
+		.timing_power = 0x41000a26,
+		.phy0_dqs = 0x08080808,
+		.phy1_dqs = 0x08080808,
+		.phy0_dq = 0x08080808,
+		.phy1_dq = 0x08080808,
+		.phy0_tFS = 0x8,
+		.phy1_tFS = 0x8,
+		.phy0_pulld_dqs = 0xf,
+		.phy1_pulld_dqs = 0xf,
+
+		.lpddr3_ctrl_phy_reset = 0x1,
+		.ctrl_start_point = 0x10,
+		.ctrl_inc = 0x10,
+		.ctrl_start = 0x1,
+		.ctrl_dll_on = 0x1,
+		.ctrl_ref = 0x8,
+
+		.ctrl_force = 0x1a,
+		.ctrl_rdlat = 0x0b,
+		.ctrl_bstlen = 0x08,
+
+		.fp_resync = 0x8,
+		.iv_size = 0x7,
+		.dfi_init_start = 1,
+		.aref_en = 1,
+
+		.rd_fetch = 0x3,
+
+		.zq_mode_dds = 0x7,
+		.zq_mode_term = 0x1,
+		.zq_mode_noterm = 1,
+
+		/*
+		* Dynamic Clock: Always Running
+		* Memory Burst length: 8
+		* Number of chips: 1
+		* Memory Bus width: 32 bit
+		* Memory Type: DDR3
+		* Additional Latancy for PLL: 0 Cycle
+		*/
+		.memcontrol = DMC_MEMCONTROL_CLK_STOP_DISABLE |
+			DMC_MEMCONTROL_DPWRDN_DISABLE |
+			DMC_MEMCONTROL_DPWRDN_ACTIVE_PRECHARGE |
+			DMC_MEMCONTROL_TP_DISABLE |
+			DMC_MEMCONTROL_DSREF_DISABLE |
+			DMC_MEMCONTROL_ADD_LAT_PALL_CYCLE(0) |
+			DMC_MEMCONTROL_MEM_TYPE_DDR3 |
+			DMC_MEMCONTROL_MEM_WIDTH_32BIT |
+			DMC_MEMCONTROL_NUM_CHIP_1 |
+			DMC_MEMCONTROL_BL_8 |
+			DMC_MEMCONTROL_PZQ_DISABLE |
+			DMC_MEMCONTROL_MRR_BYTE_7_0,
+		.memconfig = DMC_MEMCONFIG_CHIP_MAP_SPLIT |
+			DMC_MEMCONFIGX_CHIP_COL_10 |
+			DMC_MEMCONFIGX_CHIP_ROW_15 |
+			DMC_MEMCONFIGX_CHIP_BANK_8,
+		.prechconfig_tp_cnt = 0xff,
+		.dpwrdn_cyc = 0xff,
+		.dsref_cyc = 0xffff,
+		.concontrol = DMC_CONCONTROL_DFI_INIT_START_DISABLE |
+			DMC_CONCONTROL_TIMEOUT_LEVEL0 |
+			DMC_CONCONTROL_RD_FETCH_DISABLE |
+			DMC_CONCONTROL_EMPTY_DISABLE |
+			DMC_CONCONTROL_AREF_EN_DISABLE |
+			DMC_CONCONTROL_IO_PD_CON_DISABLE,
+		.dmc_channels = 1,
+		.chips_per_channel = 1,
+		.chips_to_configure = 1,
+		.send_zq_init = 1,
+		.gate_leveling_enable = 1,
+		.read_leveling_enable = 0,
+	}
+#else
 	{
 		.mem_manuf = MEM_MANUF_ELPIDA,
 		.mem_type = DDR_MODE_DDR3,
@@ -324,6 +467,7 @@ struct mem_timings mem_timings[] = {
 		.impedance = IMP_OUTPUT_DRV_40_OHM,
 		.gate_leveling_enable = 1,
 	}
+#endif
 };
 
 /**
@@ -399,7 +543,7 @@ struct mem_timings *clock_get_mem_timings(void)
 	return NULL;
 }
 
-void system_clock_init()
+static void exynos5250_system_clock_init(void)
 {
 	struct exynos5_clock *clk =
 		(struct exynos5_clock *)samsung_get_base_clock();
@@ -436,19 +580,13 @@ void system_clock_init()
 	} while ((val | MUX_BPLL_SEL_MASK) != val);
 
 	/* PLL locktime */
-	writel(APLL_LOCK_VAL, &clk->apll_lock);
-
-	writel(MPLL_LOCK_VAL, &clk->mpll_lock);
-
-	writel(BPLL_LOCK_VAL, &clk->bpll_lock);
-
-	writel(CPLL_LOCK_VAL, &clk->cpll_lock);
-
-	writel(GPLL_LOCK_VAL, &clk->gpll_lock);
-
-	writel(EPLL_LOCK_VAL, &clk->epll_lock);
-
-	writel(VPLL_LOCK_VAL, &clk->vpll_lock);
+	writel(mem->apll_pdiv * PLL_LOCK_FACTOR, &clk->apll_lock);
+	writel(mem->mpll_pdiv * PLL_LOCK_FACTOR, &clk->mpll_lock);
+	writel(mem->bpll_pdiv * PLL_LOCK_FACTOR, &clk->bpll_lock);
+	writel(mem->cpll_pdiv * PLL_LOCK_FACTOR, &clk->cpll_lock);
+	writel(mem->gpll_pdiv * PLL_X_LOCK_FACTOR, &clk->gpll_lock);
+	writel(mem->epll_pdiv * PLL_X_LOCK_FACTOR, &clk->epll_lock);
+	writel(mem->vpll_pdiv * PLL_X_LOCK_FACTOR, &clk->vpll_lock);
 
 	writel(CLK_REG_DISABLE, &clk->pll_div2_sel);
 
@@ -640,6 +778,192 @@ void system_clock_init()
 	writel(val, &clk->div_fsys2);
 }
 
+static void exynos5420_system_clock_init(void)
+{
+	struct exynos5420_clock *clk =
+		(struct exynos5420_clock *)samsung_get_base_clock();
+	struct mem_timings *mem;
+	struct arm_clk_ratios *arm_clk_ratio;
+	u32 val;
+
+	mem = clock_get_mem_timings();
+	arm_clk_ratio = get_arm_ratios();
+
+	/* PLL locktime */
+	writel(arm_clk_ratio->apll_pdiv * PLL_LOCK_FACTOR, &clk->apll_lock);
+	writel(mem->mpll_pdiv * PLL_LOCK_FACTOR, &clk->mpll_lock);
+	writel(mem->bpll_pdiv * PLL_LOCK_FACTOR, &clk->bpll_lock);
+	writel(mem->cpll_pdiv * PLL_LOCK_FACTOR, &clk->cpll_lock);
+	writel(mem->dpll_pdiv * PLL_LOCK_FACTOR, &clk->dpll_lock);
+	writel(mem->epll_pdiv * PLL_X_LOCK_FACTOR, &clk->epll_lock);
+	writel(mem->vpll_pdiv * PLL_LOCK_FACTOR, &clk->vpll_lock);
+	writel(mem->ipll_pdiv * PLL_LOCK_FACTOR, &clk->ipll_lock);
+	writel(mem->spll_pdiv * PLL_LOCK_FACTOR, &clk->spll_lock);
+	writel(mem->kpll_pdiv * PLL_LOCK_FACTOR, &clk->kpll_lock);
+
+	setbits_le32(&clk->src_cpu, MUX_HPM_SEL_MASK);
+
+	writel(0, &clk->src_top6);
+
+	writel(0, &clk->src_cdrex);
+	writel(SRC_KFC_HPM_SEL, &clk->src_kfc);
+	writel(HPM_RATIO,  &clk->div_cpu1);
+	writel(CLK_DIV_CPU0_VAL,  &clk->div_cpu0);
+
+	/* switch A15 clock source to OSC clock before changing APLL */
+	clrbits_le32(&clk->src_cpu, APLL_FOUT);
+
+	/* Set APLL */
+	writel(APLL_CON1_VAL, &clk->apll_con1);
+	val = set_pll(arm_clk_ratio->apll_mdiv,
+		      arm_clk_ratio->apll_pdiv,
+		      arm_clk_ratio->apll_sdiv);
+	writel(val, &clk->apll_con0);
+	while ((readl(&clk->apll_con0) & PLL_LOCKED) == 0)
+		;
+
+	/* now it is safe to switch to APLL */
+	setbits_le32(&clk->src_cpu, APLL_FOUT);
+
+	writel(SRC_KFC_HPM_SEL, &clk->src_kfc);
+	writel(CLK_DIV_KFC_VAL, &clk->div_kfc0);
+
+	/* switch A7 clock source to OSC clock before changing KPLL */
+	clrbits_le32(&clk->src_kfc, KPLL_FOUT);
+
+	/* Set KPLL*/
+	writel(KPLL_CON1_VAL, &clk->kpll_con1);
+	val = set_pll(mem->kpll_mdiv, mem->kpll_pdiv, mem->kpll_sdiv);
+	writel(val, &clk->kpll_con0);
+	while ((readl(&clk->kpll_con0) & PLL_LOCKED) == 0)
+		;
+
+	/* now it is safe to switch to KPLL */
+	setbits_le32(&clk->src_kfc, KPLL_FOUT);
+
+	/* Set MPLL */
+	writel(MPLL_CON1_VAL, &clk->mpll_con1);
+	val = set_pll(mem->mpll_mdiv, mem->mpll_pdiv, mem->mpll_sdiv);
+	writel(val, &clk->mpll_con0);
+	while ((readl(&clk->mpll_con0) & PLL_LOCKED) == 0)
+		;
+
+	/* Set DPLL */
+	writel(DPLL_CON1_VAL, &clk->dpll_con1);
+	val = set_pll(mem->dpll_mdiv, mem->dpll_pdiv, mem->dpll_sdiv);
+	writel(val, &clk->dpll_con0);
+	while ((readl(&clk->dpll_con0) & PLL_LOCKED) == 0)
+		;
+
+	/* Set EPLL */
+	writel(EPLL_CON2_VAL, &clk->epll_con2);
+	writel(EPLL_CON1_VAL, &clk->epll_con1);
+	val = set_pll(mem->epll_mdiv, mem->epll_pdiv, mem->epll_sdiv);
+	writel(val, &clk->epll_con0);
+	while ((readl(&clk->epll_con0) & PLL_LOCKED) == 0)
+		;
+
+	/* Set CPLL */
+	writel(CPLL_CON1_VAL, &clk->cpll_con1);
+	val = set_pll(mem->cpll_mdiv, mem->cpll_pdiv, mem->cpll_sdiv);
+	writel(val, &clk->cpll_con0);
+	while ((readl(&clk->cpll_con0) & PLL_LOCKED) == 0)
+		;
+
+	/* Set IPLL */
+	writel(IPLL_CON1_VAL, &clk->ipll_con1);
+	val = set_pll(mem->ipll_mdiv, mem->ipll_pdiv, mem->ipll_sdiv);
+	writel(val, &clk->ipll_con0);
+	while ((readl(&clk->ipll_con0) & PLL_LOCKED) == 0)
+		;
+
+	/* Set VPLL */
+	writel(VPLL_CON1_VAL, &clk->vpll_con1);
+	val = set_pll(mem->vpll_mdiv, mem->vpll_pdiv, mem->vpll_sdiv);
+	writel(val, &clk->vpll_con0);
+	while ((readl(&clk->vpll_con0) & PLL_LOCKED) == 0)
+		;
+
+	/* Set BPLL */
+	writel(BPLL_CON1_VAL, &clk->bpll_con1);
+	val = set_pll(mem->bpll_mdiv, mem->bpll_pdiv, mem->bpll_sdiv);
+	writel(val, &clk->bpll_con0);
+	while ((readl(&clk->bpll_con0) & PLL_LOCKED) == 0)
+		;
+
+	/* Set SPLL */
+	writel(SPLL_CON1_VAL, &clk->spll_con1);
+	val = set_pll(mem->spll_mdiv, mem->spll_pdiv, mem->spll_sdiv);
+	writel(val, &clk->spll_con0);
+	while ((readl(&clk->spll_con0) & PLL_LOCKED) == 0)
+		;
+
+	writel(CLK_DIV_CDREX0_VAL, &clk->div_cdrex0);
+	writel(CLK_DIV_CDREX1_VAL, &clk->div_cdrex1);
+
+	writel(CLK_SRC_TOP0_VAL, &clk->src_top0);
+	writel(CLK_SRC_TOP1_VAL, &clk->src_top1);
+	writel(CLK_SRC_TOP2_VAL, &clk->src_top2);
+	writel(CLK_SRC_TOP7_VAL, &clk->src_top7);
+
+	writel(CLK_DIV_TOP0_VAL, &clk->div_top0);
+	writel(CLK_DIV_TOP1_VAL, &clk->div_top1);
+	writel(CLK_DIV_TOP2_VAL, &clk->div_top2);
+
+	writel(0, &clk->src_top10);
+	writel(0, &clk->src_top11);
+	writel(0, &clk->src_top12);
+
+	writel(CLK_SRC_TOP3_VAL, &clk->src_top3);
+	writel(CLK_SRC_TOP4_VAL, &clk->src_top4);
+	writel(CLK_SRC_TOP5_VAL, &clk->src_top5);
+
+	/* DISP1 BLK CLK SELECTION */
+	writel(CLK_SRC_DISP1_0_VAL, &clk->src_disp10);
+	writel(CLK_DIV_DISP1_0_VAL, &clk->div_disp10);
+
+	/* AUDIO BLK */
+	writel(AUDIO0_SEL_EPLL, &clk->src_mau);
+	writel(DIV_MAU_VAL, &clk->div_mau);
+
+	/* FSYS */
+	writel(CLK_SRC_FSYS0_VAL, &clk->src_fsys);
+	writel(CLK_DIV_FSYS0_VAL, &clk->div_fsys0);
+	writel(CLK_DIV_FSYS1_VAL, &clk->div_fsys1);
+	writel(CLK_DIV_FSYS2_VAL, &clk->div_fsys2);
+
+	writel(CLK_SRC_ISP_VAL, &clk->src_isp);
+	writel(CLK_DIV_ISP0_VAL, &clk->div_isp0);
+	writel(CLK_DIV_ISP1_VAL, &clk->div_isp1);
+
+	writel(CLK_SRC_PERIC0_VAL, &clk->src_peric0);
+	writel(CLK_SRC_PERIC1_VAL, &clk->src_peric1);
+
+	writel(CLK_DIV_PERIC0_VAL, &clk->div_peric0);
+	writel(CLK_DIV_PERIC1_VAL, &clk->div_peric1);
+	writel(CLK_DIV_PERIC2_VAL, &clk->div_peric2);
+	writel(CLK_DIV_PERIC3_VAL, &clk->div_peric3);
+	writel(CLK_DIV_PERIC4_VAL, &clk->div_peric4);
+
+	writel(CLK_DIV_CPERI1_VAL, &clk->div_cperi1);
+
+	writel(CLK_DIV2_RATIO, &clk->clkdiv2_ratio);
+	writel(CLK_DIV4_RATIO, &clk->clkdiv4_ratio);
+	writel(CLK_DIV_G2D, &clk->div_g2d);
+
+	writel(CLK_SRC_TOP6_VAL, &clk->src_top6);
+	writel(CLK_SRC_CDREX_VAL, &clk->src_cdrex);
+	writel(CLK_SRC_KFC_VAL, &clk->src_kfc);
+}
+
+void system_clock_init(void)
+{
+	if (proid_is_exynos5420())
+		exynos5420_system_clock_init();
+	else
+		exynos5250_system_clock_init();
+}
+
 void clock_init_dp_clock(void)
 {
 	struct exynos5_clock *clk =
diff --git a/arch/arm/cpu/armv7/exynos/dmc_common.c b/arch/arm/cpu/armv7/exynos/dmc_common.c
index 53cfe6edb1..cca925e42c 100644
--- a/arch/arm/cpu/armv7/exynos/dmc_common.c
+++ b/arch/arm/cpu/armv7/exynos/dmc_common.c
@@ -1,5 +1,5 @@
 /*
- * Mem setup common file for different types of DDR present on SMDK5250 boards.
+ * Mem setup common file for different types of DDR present on Exynos boards.
  *
  * Copyright (C) 2012 Samsung Electronics
  *
@@ -15,9 +15,9 @@
 
 #define ZQ_INIT_TIMEOUT	10000
 
-int dmc_config_zq(struct mem_timings *mem,
-		  struct exynos5_phy_control *phy0_ctrl,
-		  struct exynos5_phy_control *phy1_ctrl)
+int dmc_config_zq(struct mem_timings *mem, uint32_t *phy0_con16,
+			uint32_t *phy1_con16, uint32_t *phy0_con17,
+			uint32_t *phy1_con17)
 {
 	unsigned long val = 0;
 	int i;
@@ -31,19 +31,19 @@ int dmc_config_zq(struct mem_timings *mem,
 	val |= mem->zq_mode_dds << PHY_CON16_ZQ_MODE_DDS_SHIFT;
 	val |= mem->zq_mode_term << PHY_CON16_ZQ_MODE_TERM_SHIFT;
 	val |= ZQ_CLK_DIV_EN;
-	writel(val, &phy0_ctrl->phy_con16);
-	writel(val, &phy1_ctrl->phy_con16);
+	writel(val, phy0_con16);
+	writel(val, phy1_con16);
 
 	/* Disable termination */
 	if (mem->zq_mode_noterm)
 		val |= PHY_CON16_ZQ_MODE_NOTERM_MASK;
-	writel(val, &phy0_ctrl->phy_con16);
-	writel(val, &phy1_ctrl->phy_con16);
+	writel(val, phy0_con16);
+	writel(val, phy1_con16);
 
 	/* ZQ_MANUAL_START: Enable */
 	val |= ZQ_MANUAL_STR;
-	writel(val, &phy0_ctrl->phy_con16);
-	writel(val, &phy1_ctrl->phy_con16);
+	writel(val, phy0_con16);
+	writel(val, phy1_con16);
 
 	/* ZQ_MANUAL_START: Disable */
 	val &= ~ZQ_MANUAL_STR;
@@ -53,47 +53,47 @@ int dmc_config_zq(struct mem_timings *mem,
 	 * we are looping for the ZQ_init to complete.
 	 */
 	i = ZQ_INIT_TIMEOUT;
-	while ((readl(&phy0_ctrl->phy_con17) & ZQ_DONE) != ZQ_DONE && i > 0) {
+	while ((readl(phy0_con17) & ZQ_DONE) != ZQ_DONE && i > 0) {
 		sdelay(100);
 		i--;
 	}
 	if (!i)
 		return -1;
-	writel(val, &phy0_ctrl->phy_con16);
+	writel(val, phy0_con16);
 
 	i = ZQ_INIT_TIMEOUT;
-	while ((readl(&phy1_ctrl->phy_con17) & ZQ_DONE) != ZQ_DONE && i > 0) {
+	while ((readl(phy1_con17) & ZQ_DONE) != ZQ_DONE && i > 0) {
 		sdelay(100);
 		i--;
 	}
 	if (!i)
 		return -1;
-	writel(val, &phy1_ctrl->phy_con16);
+	writel(val, phy1_con16);
 
 	return 0;
 }
 
-void update_reset_dll(struct exynos5_dmc *dmc, enum ddr_mode mode)
+void update_reset_dll(uint32_t *phycontrol0, enum ddr_mode mode)
 {
 	unsigned long val;
 
 	if (mode == DDR_MODE_DDR3) {
 		val = MEM_TERM_EN | PHY_TERM_EN | DMC_CTRL_SHGATE;
-		writel(val, &dmc->phycontrol0);
+		writel(val, phycontrol0);
 	}
 
 	/* Update DLL Information: Force DLL Resyncronization */
-	val = readl(&dmc->phycontrol0);
+	val = readl(phycontrol0);
 	val |= FP_RSYNC;
-	writel(val, &dmc->phycontrol0);
+	writel(val, phycontrol0);
 
 	/* Reset Force DLL Resyncronization */
-	val = readl(&dmc->phycontrol0);
+	val = readl(phycontrol0);
 	val &= ~FP_RSYNC;
-	writel(val, &dmc->phycontrol0);
+	writel(val, phycontrol0);
 }
 
-void dmc_config_mrs(struct mem_timings *mem, struct exynos5_dmc *dmc)
+void dmc_config_mrs(struct mem_timings *mem, uint32_t *directcmd)
 {
 	int channel, chip;
 
@@ -107,7 +107,7 @@ void dmc_config_mrs(struct mem_timings *mem, struct exynos5_dmc *dmc)
 			mask |= chip << DIRECT_CMD_CHIP_SHIFT;
 
 			/* Sending NOP command */
-			writel(DIRECT_CMD_NOP | mask, &dmc->directcmd);
+			writel(DIRECT_CMD_NOP | mask, directcmd);
 
 			/*
 			 * TODO(alim.akhtar@samsung.com): Do we need these
@@ -119,14 +119,14 @@ void dmc_config_mrs(struct mem_timings *mem, struct exynos5_dmc *dmc)
 			/* Sending EMRS/MRS commands */
 			for (i = 0; i < MEM_TIMINGS_MSR_COUNT; i++) {
 				writel(mem->direct_cmd_msr[i] | mask,
-				       &dmc->directcmd);
+				       directcmd);
 				sdelay(0x10000);
 			}
 
 			if (mem->send_zq_init) {
 				/* Sending ZQINIT command */
 				writel(DIRECT_CMD_ZQINIT | mask,
-				       &dmc->directcmd);
+				       directcmd);
 
 				sdelay(10000);
 			}
@@ -134,7 +134,7 @@ void dmc_config_mrs(struct mem_timings *mem, struct exynos5_dmc *dmc)
 	}
 }
 
-void dmc_config_prech(struct mem_timings *mem, struct exynos5_dmc *dmc)
+void dmc_config_prech(struct mem_timings *mem, uint32_t *directcmd)
 {
 	int channel, chip;
 
@@ -146,20 +146,12 @@ void dmc_config_prech(struct mem_timings *mem, struct exynos5_dmc *dmc)
 			mask |= chip << DIRECT_CMD_CHIP_SHIFT;
 
 			/* PALL (all banks precharge) CMD */
-			writel(DIRECT_CMD_PALL | mask, &dmc->directcmd);
+			writel(DIRECT_CMD_PALL | mask, directcmd);
 			sdelay(0x10000);
 		}
 	}
 }
 
-void dmc_config_memory(struct mem_timings *mem, struct exynos5_dmc *dmc)
-{
-	writel(mem->memconfig, &dmc->memconfig0);
-	writel(mem->memconfig, &dmc->memconfig1);
-	writel(DMC_MEMBASECONFIG0_VAL, &dmc->membaseconfig0);
-	writel(DMC_MEMBASECONFIG1_VAL, &dmc->membaseconfig1);
-}
-
 void mem_ctrl_init(int reset)
 {
 	struct spl_machine_param *param = spl_get_machine_params();
diff --git a/arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c b/arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c
index 5f5914ede8..487e6f423f 100644
--- a/arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c
+++ b/arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c
@@ -1,5 +1,5 @@
 /*
- * DDR3 mem setup file for SMDK5250 board based on EXYNOS5
+ * DDR3 mem setup file for board based on EXYNOS5
  *
  * Copyright (C) 2012 Samsung Electronics
  *
@@ -11,12 +11,14 @@
 #include <asm/arch/clock.h>
 #include <asm/arch/cpu.h>
 #include <asm/arch/dmc.h>
+#include <asm/arch/power.h>
 #include "common_setup.h"
 #include "exynos5_setup.h"
 #include "clock_init.h"
 
-#define RDLVL_COMPLETE_TIMEOUT	10000
+#define TIMEOUT	10000
 
+#ifdef CONFIG_EXYNOS5250
 static void reset_phy_ctrl(void)
 {
 	struct exynos5_clock *clk =
@@ -57,7 +59,8 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size,
 	writel(val, &phy1_ctrl->phy_con42);
 
 	/* ZQ Calibration */
-	if (dmc_config_zq(mem, phy0_ctrl, phy1_ctrl))
+	if (dmc_config_zq(mem, &phy0_ctrl->phy_con16, &phy1_ctrl->phy_con16,
+			  &phy0_ctrl->phy_con17, &phy1_ctrl->phy_con17))
 		return SETUP_ERR_ZQ_CALIBRATION_FAILURE;
 
 	/* DQ Signal */
@@ -68,7 +71,7 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size,
 		| (mem->dfi_init_start << CONCONTROL_DFI_INIT_START_SHIFT),
 		&dmc->concontrol);
 
-	update_reset_dll(dmc, DDR_MODE_DDR3);
+	update_reset_dll(&dmc->phycontrol0, DDR_MODE_DDR3);
 
 	/* DQS Signal */
 	writel(mem->phy0_dqs, &phy0_ctrl->phy_con4);
@@ -93,7 +96,7 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size,
 	writel(val | (mem->ctrl_start << PHY_CON12_CTRL_START_SHIFT),
 	       &phy1_ctrl->phy_con12);
 
-	update_reset_dll(dmc, DDR_MODE_DDR3);
+	update_reset_dll(&dmc->phycontrol0, DDR_MODE_DDR3);
 
 	writel(mem->concontrol | (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT),
 	       &dmc->concontrol);
@@ -124,10 +127,10 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size,
 	writel(mem->timing_power, &dmc->timingpower);
 
 	/* Send PALL command */
-	dmc_config_prech(mem, dmc);
+	dmc_config_prech(mem, &dmc->directcmd);
 
 	/* Send NOP, MRS and ZQINIT commands */
-	dmc_config_mrs(mem, dmc);
+	dmc_config_mrs(mem, &dmc->directcmd);
 
 	if (mem->gate_leveling_enable) {
 		val = PHY_CON0_RESET_VAL;
@@ -174,7 +177,7 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size,
 		writel(val, &phy1_ctrl->phy_con1);
 
 		writel(CTRL_RDLVL_GATE_ENABLE, &dmc->rdlvl_config);
-		i = RDLVL_COMPLETE_TIMEOUT;
+		i = TIMEOUT;
 		while ((readl(&dmc->phystatus) &
 			(RDLVL_COMPLETE_CHO | RDLVL_COMPLETE_CH1)) !=
 			(RDLVL_COMPLETE_CHO | RDLVL_COMPLETE_CH1) && i > 0) {
@@ -202,11 +205,11 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size,
 		writel(val, &phy0_ctrl->phy_con12);
 		writel(val, &phy1_ctrl->phy_con12);
 
-		update_reset_dll(dmc, DDR_MODE_DDR3);
+		update_reset_dll(&dmc->phycontrol0, DDR_MODE_DDR3);
 	}
 
 	/* Send PALL command */
-	dmc_config_prech(mem, dmc);
+	dmc_config_prech(mem, &dmc->directcmd);
 
 	writel(mem->memcontrol, &dmc->memcontrol);
 
@@ -215,3 +218,419 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size,
 		| (mem->aref_en << CONCONTROL_AREF_EN_SHIFT), &dmc->concontrol);
 	return 0;
 }
+#endif
+
+#ifdef CONFIG_EXYNOS5420
+int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size,
+		       int reset)
+{
+	struct exynos5420_clock *clk =
+		(struct exynos5420_clock *)samsung_get_base_clock();
+	struct exynos5420_power *power =
+		(struct exynos5420_power *)samsung_get_base_power();
+	struct exynos5420_phy_control *phy0_ctrl, *phy1_ctrl;
+	struct exynos5420_dmc *drex0, *drex1;
+	struct exynos5420_tzasc *tzasc0, *tzasc1;
+	uint32_t val, n_lock_r, n_lock_w_phy0, n_lock_w_phy1;
+	int chip;
+	int i;
+
+	phy0_ctrl = (struct exynos5420_phy_control *)samsung_get_base_dmc_phy();
+	phy1_ctrl = (struct exynos5420_phy_control *)(samsung_get_base_dmc_phy()
+							+ DMC_OFFSET);
+	drex0 = (struct exynos5420_dmc *)samsung_get_base_dmc_ctrl();
+	drex1 = (struct exynos5420_dmc *)(samsung_get_base_dmc_ctrl()
+							+ DMC_OFFSET);
+	tzasc0 = (struct exynos5420_tzasc *)samsung_get_base_dmc_tzasc();
+	tzasc1 = (struct exynos5420_tzasc *)(samsung_get_base_dmc_tzasc()
+							+ DMC_OFFSET);
+
+	/* Enable PAUSE for DREX */
+	setbits_le32(&clk->pause, ENABLE_BIT);
+
+	/* Enable BYPASS mode */
+	setbits_le32(&clk->bpll_con1, BYPASS_EN);
+
+	writel(MUX_BPLL_SEL_FOUTBPLL, &clk->src_cdrex);
+	do {
+		val = readl(&clk->mux_stat_cdrex);
+		val &= BPLL_SEL_MASK;
+	} while (val != FOUTBPLL);
+
+	clrbits_le32(&clk->bpll_con1, BYPASS_EN);
+
+	/* Specify the DDR memory type as DDR3 */
+	val = readl(&phy0_ctrl->phy_con0);
+	val &= ~(PHY_CON0_CTRL_DDR_MODE_MASK << PHY_CON0_CTRL_DDR_MODE_SHIFT);
+	val |= (DDR_MODE_DDR3 << PHY_CON0_CTRL_DDR_MODE_SHIFT);
+	writel(val, &phy0_ctrl->phy_con0);
+
+	val = readl(&phy1_ctrl->phy_con0);
+	val &= ~(PHY_CON0_CTRL_DDR_MODE_MASK << PHY_CON0_CTRL_DDR_MODE_SHIFT);
+	val |= (DDR_MODE_DDR3 << PHY_CON0_CTRL_DDR_MODE_SHIFT);
+	writel(val, &phy1_ctrl->phy_con0);
+
+	/* Set Read Latency and Burst Length for PHY0 and PHY1 */
+	val = (mem->ctrl_bstlen << PHY_CON42_CTRL_BSTLEN_SHIFT) |
+		(mem->ctrl_rdlat << PHY_CON42_CTRL_RDLAT_SHIFT);
+	writel(val, &phy0_ctrl->phy_con42);
+	writel(val, &phy1_ctrl->phy_con42);
+
+	val = readl(&phy0_ctrl->phy_con26);
+	val &= ~(T_WRDATA_EN_MASK << T_WRDATA_EN_OFFSET);
+	val |= (T_WRDATA_EN_DDR3 << T_WRDATA_EN_OFFSET);
+	writel(val, &phy0_ctrl->phy_con26);
+
+	val = readl(&phy1_ctrl->phy_con26);
+	val &= ~(T_WRDATA_EN_MASK << T_WRDATA_EN_OFFSET);
+	val |= (T_WRDATA_EN_DDR3 << T_WRDATA_EN_OFFSET);
+	writel(val, &phy1_ctrl->phy_con26);
+
+	/*
+	 * Set Driver strength for CK, CKE, CS & CA to 0x7
+	 * Set Driver strength for Data Slice 0~3 to 0x7
+	 */
+	val = (0x7 << CA_CK_DRVR_DS_OFFSET) | (0x7 << CA_CKE_DRVR_DS_OFFSET) |
+		(0x7 << CA_CS_DRVR_DS_OFFSET) | (0x7 << CA_ADR_DRVR_DS_OFFSET);
+	val |= (0x7 << DA_3_DS_OFFSET) | (0x7 << DA_2_DS_OFFSET) |
+		(0x7 << DA_1_DS_OFFSET) | (0x7 << DA_0_DS_OFFSET);
+	writel(val, &phy0_ctrl->phy_con39);
+	writel(val, &phy1_ctrl->phy_con39);
+
+	/* ZQ Calibration */
+	if (dmc_config_zq(mem, &phy0_ctrl->phy_con16, &phy1_ctrl->phy_con16,
+			  &phy0_ctrl->phy_con17, &phy1_ctrl->phy_con17))
+		return SETUP_ERR_ZQ_CALIBRATION_FAILURE;
+
+	clrbits_le32(&phy0_ctrl->phy_con16, ZQ_CLK_DIV_EN);
+	clrbits_le32(&phy1_ctrl->phy_con16, ZQ_CLK_DIV_EN);
+
+	/* DQ Signal */
+	val = readl(&phy0_ctrl->phy_con14);
+	val |= mem->phy0_pulld_dqs;
+	writel(val, &phy0_ctrl->phy_con14);
+	val = readl(&phy1_ctrl->phy_con14);
+	val |= mem->phy1_pulld_dqs;
+	writel(val, &phy1_ctrl->phy_con14);
+
+	val = MEM_TERM_EN | PHY_TERM_EN;
+	writel(val, &drex0->phycontrol0);
+	writel(val, &drex1->phycontrol0);
+
+	writel(mem->concontrol |
+		(mem->dfi_init_start << CONCONTROL_DFI_INIT_START_SHIFT) |
+		(mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT),
+		&drex0->concontrol);
+	writel(mem->concontrol |
+		(mem->dfi_init_start << CONCONTROL_DFI_INIT_START_SHIFT) |
+		(mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT),
+		&drex1->concontrol);
+
+	do {
+		val = readl(&drex0->phystatus);
+	} while ((val & DFI_INIT_COMPLETE) != DFI_INIT_COMPLETE);
+	do {
+		val = readl(&drex1->phystatus);
+	} while ((val & DFI_INIT_COMPLETE) != DFI_INIT_COMPLETE);
+
+	clrbits_le32(&drex0->concontrol, DFI_INIT_START);
+	clrbits_le32(&drex1->concontrol, DFI_INIT_START);
+
+	update_reset_dll(&drex0->phycontrol0, DDR_MODE_DDR3);
+	update_reset_dll(&drex1->phycontrol0, DDR_MODE_DDR3);
+
+	/*
+	 * Set Base Address:
+	 * 0x2000_0000 ~ 0x5FFF_FFFF
+	 * 0x6000_0000 ~ 0x9FFF_FFFF
+	 */
+	/* MEMBASECONFIG0 */
+	val = DMC_MEMBASECONFIGX_CHIP_BASE(DMC_CHIP_BASE_0) |
+		DMC_MEMBASECONFIGX_CHIP_MASK(DMC_CHIP_MASK);
+	writel(val, &tzasc0->membaseconfig0);
+	writel(val, &tzasc1->membaseconfig0);
+
+	/* MEMBASECONFIG1 */
+	val = DMC_MEMBASECONFIGX_CHIP_BASE(DMC_CHIP_BASE_1) |
+		DMC_MEMBASECONFIGX_CHIP_MASK(DMC_CHIP_MASK);
+	writel(val, &tzasc0->membaseconfig1);
+	writel(val, &tzasc1->membaseconfig1);
+
+	/*
+	 * Memory Channel Inteleaving Size
+	 * Ares Channel interleaving = 128 bytes
+	 */
+	/* MEMCONFIG0/1 */
+	writel(mem->memconfig, &tzasc0->memconfig0);
+	writel(mem->memconfig, &tzasc1->memconfig0);
+	writel(mem->memconfig, &tzasc0->memconfig1);
+	writel(mem->memconfig, &tzasc1->memconfig1);
+
+	/* Precharge Configuration */
+	writel(mem->prechconfig_tp_cnt << PRECHCONFIG_TP_CNT_SHIFT,
+	       &drex0->prechconfig0);
+	writel(mem->prechconfig_tp_cnt << PRECHCONFIG_TP_CNT_SHIFT,
+	       &drex1->prechconfig0);
+
+	/*
+	 * TimingRow, TimingData, TimingPower and Timingaref
+	 * values as per Memory AC parameters
+	 */
+	writel(mem->timing_ref, &drex0->timingref);
+	writel(mem->timing_ref, &drex1->timingref);
+	writel(mem->timing_row, &drex0->timingrow0);
+	writel(mem->timing_row, &drex1->timingrow0);
+	writel(mem->timing_data, &drex0->timingdata0);
+	writel(mem->timing_data, &drex1->timingdata0);
+	writel(mem->timing_power, &drex0->timingpower0);
+	writel(mem->timing_power, &drex1->timingpower0);
+
+	if (reset) {
+		/*
+		 * Send NOP, MRS and ZQINIT commands
+		 * Sending MRS command will reset the DRAM. We should not be
+		 * reseting the DRAM after resume, this will lead to memory
+		 * corruption as DRAM content is lost after DRAM reset
+		 */
+		dmc_config_mrs(mem, &drex0->directcmd);
+		dmc_config_mrs(mem, &drex1->directcmd);
+	} else {
+		/*
+		 * During Suspend-Resume & S/W-Reset, as soon as PMU releases
+		 * pad retention, CKE goes high. This causes memory contents
+		 * not to be retained during DRAM initialization. Therfore,
+		 * there is a new control register(0x100431e8[28]) which lets us
+		 * release pad retention and retain the memory content until the
+		 * initialization is complete.
+		 */
+		writel(PAD_RETENTION_DRAM_COREBLK_VAL,
+		       &power->pad_retention_dram_coreblk_option);
+		do {
+			val = readl(&power->pad_retention_dram_status);
+		} while (val != 0x1);
+
+		/*
+		 * CKE PAD retention disables DRAM self-refresh mode.
+		 * Send auto refresh command for DRAM refresh.
+		 */
+		for (i = 0; i < 128; i++) {
+			for (chip = 0; chip < mem->chips_to_configure; chip++) {
+				writel(DIRECT_CMD_REFA |
+				       (chip << DIRECT_CMD_CHIP_SHIFT),
+				       &drex0->directcmd);
+				writel(DIRECT_CMD_REFA |
+				       (chip << DIRECT_CMD_CHIP_SHIFT),
+				       &drex1->directcmd);
+			}
+		}
+	}
+
+	if (mem->gate_leveling_enable) {
+		writel(PHY_CON0_RESET_VAL, &phy0_ctrl->phy_con0);
+		writel(PHY_CON0_RESET_VAL, &phy1_ctrl->phy_con0);
+
+		setbits_le32(&phy0_ctrl->phy_con0, P0_CMD_EN);
+		setbits_le32(&phy1_ctrl->phy_con0, P0_CMD_EN);
+
+		val = PHY_CON2_RESET_VAL;
+		val |= INIT_DESKEW_EN;
+		writel(val, &phy0_ctrl->phy_con2);
+		writel(val, &phy1_ctrl->phy_con2);
+
+		val =  readl(&phy0_ctrl->phy_con1);
+		val |= (RDLVL_PASS_ADJ_VAL << RDLVL_PASS_ADJ_OFFSET);
+		writel(val, &phy0_ctrl->phy_con1);
+
+		val =  readl(&phy1_ctrl->phy_con1);
+		val |= (RDLVL_PASS_ADJ_VAL << RDLVL_PASS_ADJ_OFFSET);
+		writel(val, &phy1_ctrl->phy_con1);
+
+		n_lock_r = readl(&phy0_ctrl->phy_con13);
+		n_lock_w_phy0 = (n_lock_r & CTRL_LOCK_COARSE_MASK) >> 2;
+		n_lock_r = readl(&phy0_ctrl->phy_con12);
+		n_lock_r &= ~CTRL_DLL_ON;
+		n_lock_r |= n_lock_w_phy0;
+		writel(n_lock_r, &phy0_ctrl->phy_con12);
+
+		n_lock_r = readl(&phy1_ctrl->phy_con13);
+		n_lock_w_phy1 = (n_lock_r & CTRL_LOCK_COARSE_MASK) >> 2;
+		n_lock_r = readl(&phy1_ctrl->phy_con12);
+		n_lock_r &= ~CTRL_DLL_ON;
+		n_lock_r |= n_lock_w_phy1;
+		writel(n_lock_r, &phy1_ctrl->phy_con12);
+
+		val = (0x3 << DIRECT_CMD_BANK_SHIFT) | 0x4;
+		for (chip = 0; chip < mem->chips_to_configure; chip++) {
+			writel(val | (chip << DIRECT_CMD_CHIP_SHIFT),
+			       &drex0->directcmd);
+			writel(val | (chip << DIRECT_CMD_CHIP_SHIFT),
+			       &drex1->directcmd);
+		}
+
+		setbits_le32(&phy0_ctrl->phy_con2, RDLVL_GATE_EN);
+		setbits_le32(&phy1_ctrl->phy_con2, RDLVL_GATE_EN);
+
+		setbits_le32(&phy0_ctrl->phy_con0, CTRL_SHGATE);
+		setbits_le32(&phy1_ctrl->phy_con0, CTRL_SHGATE);
+
+		val = readl(&phy0_ctrl->phy_con1);
+		val &= ~(CTRL_GATEDURADJ_MASK);
+		writel(val, &phy0_ctrl->phy_con1);
+
+		val = readl(&phy1_ctrl->phy_con1);
+		val &= ~(CTRL_GATEDURADJ_MASK);
+		writel(val, &phy1_ctrl->phy_con1);
+
+		writel(CTRL_RDLVL_GATE_ENABLE, &drex0->rdlvl_config);
+		i = TIMEOUT;
+		while (((readl(&drex0->phystatus) & RDLVL_COMPLETE_CHO) !=
+			RDLVL_COMPLETE_CHO) && (i > 0)) {
+			/*
+			 * TODO(waihong): Comment on how long this take to
+			 * timeout
+			 */
+			sdelay(100);
+			i--;
+		}
+		if (!i)
+			return SETUP_ERR_RDLV_COMPLETE_TIMEOUT;
+		writel(CTRL_RDLVL_GATE_DISABLE, &drex0->rdlvl_config);
+
+		writel(CTRL_RDLVL_GATE_ENABLE, &drex1->rdlvl_config);
+		i = TIMEOUT;
+		while (((readl(&drex1->phystatus) & RDLVL_COMPLETE_CHO) !=
+			RDLVL_COMPLETE_CHO) && (i > 0)) {
+			/*
+			 * TODO(waihong): Comment on how long this take to
+			 * timeout
+			 */
+			sdelay(100);
+			i--;
+		}
+		if (!i)
+			return SETUP_ERR_RDLV_COMPLETE_TIMEOUT;
+		writel(CTRL_RDLVL_GATE_DISABLE, &drex1->rdlvl_config);
+
+		writel(0, &phy0_ctrl->phy_con14);
+		writel(0, &phy1_ctrl->phy_con14);
+
+		val = (0x3 << DIRECT_CMD_BANK_SHIFT);
+		for (chip = 0; chip < mem->chips_to_configure; chip++) {
+			writel(val | (chip << DIRECT_CMD_CHIP_SHIFT),
+			       &drex0->directcmd);
+			writel(val | (chip << DIRECT_CMD_CHIP_SHIFT),
+			       &drex1->directcmd);
+		}
+
+		if (mem->read_leveling_enable) {
+			/* Set Read DQ Calibration */
+			val = (0x3 << DIRECT_CMD_BANK_SHIFT) | 0x4;
+			for (chip = 0; chip < mem->chips_to_configure; chip++) {
+				writel(val | (chip << DIRECT_CMD_CHIP_SHIFT),
+				       &drex0->directcmd);
+				writel(val | (chip << DIRECT_CMD_CHIP_SHIFT),
+				       &drex1->directcmd);
+			}
+
+			val = readl(&phy0_ctrl->phy_con1);
+			val |= READ_LEVELLING_DDR3;
+			writel(val, &phy0_ctrl->phy_con1);
+			val = readl(&phy1_ctrl->phy_con1);
+			val |= READ_LEVELLING_DDR3;
+			writel(val, &phy1_ctrl->phy_con1);
+
+			val = readl(&phy0_ctrl->phy_con2);
+			val |= (RDLVL_EN | RDLVL_INCR_ADJ);
+			writel(val, &phy0_ctrl->phy_con2);
+			val = readl(&phy1_ctrl->phy_con2);
+			val |= (RDLVL_EN | RDLVL_INCR_ADJ);
+			writel(val, &phy1_ctrl->phy_con2);
+
+			setbits_le32(&drex0->rdlvl_config,
+				     CTRL_RDLVL_DATA_ENABLE);
+			i = TIMEOUT;
+			while (((readl(&drex0->phystatus) & RDLVL_COMPLETE_CHO)
+				 != RDLVL_COMPLETE_CHO) && (i > 0)) {
+				/*
+				 * TODO(waihong): Comment on how long this take
+				 * to timeout
+				 */
+				sdelay(100);
+				i--;
+			}
+			if (!i)
+				return SETUP_ERR_RDLV_COMPLETE_TIMEOUT;
+
+			clrbits_le32(&drex0->rdlvl_config,
+				     CTRL_RDLVL_DATA_ENABLE);
+			setbits_le32(&drex1->rdlvl_config,
+				     CTRL_RDLVL_DATA_ENABLE);
+			i = TIMEOUT;
+			while (((readl(&drex1->phystatus) & RDLVL_COMPLETE_CHO)
+				 != RDLVL_COMPLETE_CHO) && (i > 0)) {
+				/*
+				 * TODO(waihong): Comment on how long this take
+				 * to timeout
+				 */
+				sdelay(100);
+				i--;
+			}
+			if (!i)
+				return SETUP_ERR_RDLV_COMPLETE_TIMEOUT;
+
+			clrbits_le32(&drex1->rdlvl_config,
+				     CTRL_RDLVL_DATA_ENABLE);
+
+			val = (0x3 << DIRECT_CMD_BANK_SHIFT);
+			for (chip = 0; chip < mem->chips_to_configure; chip++) {
+				writel(val | (chip << DIRECT_CMD_CHIP_SHIFT),
+				       &drex0->directcmd);
+				writel(val | (chip << DIRECT_CMD_CHIP_SHIFT),
+				       &drex1->directcmd);
+			}
+
+			update_reset_dll(&drex0->phycontrol0, DDR_MODE_DDR3);
+			update_reset_dll(&drex1->phycontrol0, DDR_MODE_DDR3);
+		}
+
+		/* Common Settings for Leveling */
+		val = PHY_CON12_RESET_VAL;
+		writel((val + n_lock_w_phy0), &phy0_ctrl->phy_con12);
+		writel((val + n_lock_w_phy1), &phy1_ctrl->phy_con12);
+
+		setbits_le32(&phy0_ctrl->phy_con2, DLL_DESKEW_EN);
+		setbits_le32(&phy1_ctrl->phy_con2, DLL_DESKEW_EN);
+	}
+
+	/* Send PALL command */
+	dmc_config_prech(mem, &drex0->directcmd);
+	dmc_config_prech(mem, &drex1->directcmd);
+
+	writel(mem->memcontrol, &drex0->memcontrol);
+	writel(mem->memcontrol, &drex1->memcontrol);
+
+	/*
+	 * Set DMC Concontrol: Enable auto-refresh counter, provide
+	 * read data fetch cycles and enable DREX auto set powerdown
+	 * for input buffer of I/O in none read memory state.
+	 */
+	writel(mem->concontrol | (mem->aref_en << CONCONTROL_AREF_EN_SHIFT) |
+		(mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT)|
+		DMC_CONCONTROL_IO_PD_CON(0x2),
+		&drex0->concontrol);
+	writel(mem->concontrol | (mem->aref_en << CONCONTROL_AREF_EN_SHIFT) |
+		(mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT)|
+		DMC_CONCONTROL_IO_PD_CON(0x2),
+		&drex1->concontrol);
+
+	/*
+	 * Enable Clock Gating Control for DMC
+	 * this saves around 25 mw dmc power as compared to the power
+	 * consumption without these bits enabled
+	 */
+	setbits_le32(&drex0->cgcontrol, DMC_INTERNAL_CG);
+	setbits_le32(&drex1->cgcontrol, DMC_INTERNAL_CG);
+
+	return 0;
+}
+#endif
diff --git a/arch/arm/cpu/armv7/exynos/exynos5_setup.h b/arch/arm/cpu/armv7/exynos/exynos5_setup.h
index 696b386759..53b0ace6e3 100644
--- a/arch/arm/cpu/armv7/exynos/exynos5_setup.h
+++ b/arch/arm/cpu/armv7/exynos/exynos5_setup.h
@@ -12,42 +12,16 @@
 #include <config.h>
 #include <asm/arch/dmc.h>
 
-/* APLL_CON1	*/
-#define APLL_CON1_VAL	(0x00203800)
-
-/* MPLL_CON1	*/
-#define MPLL_CON1_VAL   (0x00203800)
-
-/* CPLL_CON1	*/
-#define CPLL_CON1_VAL	(0x00203800)
-
-/* GPLL_CON1	*/
-#define GPLL_CON1_VAL	(0x00203800)
-
-/* EPLL_CON1, CON2	*/
-#define EPLL_CON1_VAL	0x00000000
-#define EPLL_CON2_VAL	0x00000080
-
-/* VPLL_CON1, CON2	*/
-#define VPLL_CON1_VAL	0x00000000
-#define VPLL_CON2_VAL	0x00000080
+#define NOT_AVAILABLE		0
+#define DATA_MASK		0xFFFFF
 
-/* BPLL_CON1	*/
-#define BPLL_CON1_VAL	0x00203800
+#define ENABLE_BIT		0x1
+#define DISABLE_BIT		0x0
+#define CA_SWAP_EN		(1 << 0)
 
 /* Set PLL */
 #define set_pll(mdiv, pdiv, sdiv)	(1<<31 | mdiv<<16 | pdiv<<8 | sdiv)
 
-/* CLK_SRC_CPU	*/
-/* 0 = MOUTAPLL,  1 = SCLKMPLL	*/
-#define MUX_HPM_SEL             0
-#define MUX_CPU_SEL             0
-#define MUX_APLL_SEL            1
-
-#define CLK_SRC_CPU_VAL		((MUX_HPM_SEL << 20)    \
-				| (MUX_CPU_SEL << 16)  \
-				| (MUX_APLL_SEL))
-
 /* MEMCONTROL register bit fields */
 #define DMC_MEMCONTROL_CLK_STOP_DISABLE	(0 << 0)
 #define DMC_MEMCONTROL_DPWRDN_DISABLE	(0 << 1)
@@ -78,6 +52,7 @@
 
 /* MEMCONFIG0 register bit fields */
 #define DMC_MEMCONFIGX_CHIP_MAP_INTERLEAVED     (1 << 12)
+#define DMC_MEMCONFIG_CHIP_MAP_SPLIT		(2 << 12)
 #define DMC_MEMCONFIGX_CHIP_COL_10              (3 << 8)
 #define DMC_MEMCONFIGX_CHIP_ROW_14              (2 << 4)
 #define DMC_MEMCONFIGX_CHIP_ROW_15              (3 << 4)
@@ -90,6 +65,17 @@
 	DMC_MEMBASECONFIGX_CHIP_MASK(0x780)     \
 )
 
+/*
+ * As we use channel interleaving, therefore value of the base address
+ * register must be set as half of the bus base address
+ * RAM start addess is 0x2000_0000 which means chip_base is 0x20, so
+ * we need to set half 0x10 to the membaseconfigx registers
+ * see exynos5420 UM section 17.17.3.21 for more.
+ */
+#define DMC_CHIP_BASE_0 0x10
+#define DMC_CHIP_BASE_1 0x50
+#define DMC_CHIP_MASK	0x7C0
+
 #define DMC_MEMBASECONFIG0_VAL  DMC_MEMBASECONFIG_VAL(0x40)
 #define DMC_MEMBASECONFIG1_VAL  DMC_MEMBASECONFIG_VAL(0x80)
 
@@ -113,29 +99,24 @@
 
 /* COJCONTROL register bit fields */
 #define DMC_CONCONTROL_IO_PD_CON_DISABLE	(0 << 3)
+#define DMC_CONCONTROL_IO_PD_CON_ENABLE		(1 << 3)
 #define DMC_CONCONTROL_AREF_EN_DISABLE		(0 << 5)
+#define DMC_CONCONTROL_AREF_EN_ENABLE		(1 << 5)
 #define DMC_CONCONTROL_EMPTY_DISABLE		(0 << 8)
 #define DMC_CONCONTROL_EMPTY_ENABLE		(1 << 8)
 #define DMC_CONCONTROL_RD_FETCH_DISABLE		(0x0 << 12)
 #define DMC_CONCONTROL_TIMEOUT_LEVEL0		(0xFFF << 16)
 #define DMC_CONCONTROL_DFI_INIT_START_DISABLE	(0 << 28)
 
-/* CLK_DIV_CPU0_VAL */
-#define CLK_DIV_CPU0_VAL	((ARM2_RATIO << 28)             \
-				| (APLL_RATIO << 24)            \
-				| (PCLK_DBG_RATIO << 20)        \
-				| (ATB_RATIO << 16)             \
-				| (PERIPH_RATIO << 12)          \
-				| (ACP_RATIO << 8)              \
-				| (CPUD_RATIO << 4)             \
-				| (ARM_RATIO))
+#define DMC_CONCONTROL_VAL	0x1FFF2101
 
+#define DREX_CONCONTROL_VAL	DMC_CONCONTROL_VAL			\
+				| DMC_CONCONTROL_AREF_EN_ENABLE		\
+				| DMC_CONCONTROL_IO_PD_CON_ENABLE
 
-/* CLK_FSYS */
-#define CLK_SRC_FSYS0_VAL              0x66666
-#define CLK_DIV_FSYS0_VAL	       0x0BB00000
+#define DMC_CONCONTROL_IO_PD_CON(x)		(x << 6)
 
-/* CLK_DIV_CPU1	*/
+/* CLK_DIV_CPU1 */
 #define HPM_RATIO               0x2
 #define COPY_RATIO              0x0
 
@@ -164,10 +145,367 @@
 /* CLK_DIV_SYSLFT */
 #define CLK_DIV_SYSLFT_VAL      0x00000311
 
+#define MUX_APLL_SEL_MASK	(1 << 0)
+#define MUX_MPLL_SEL_MASK	(1 << 8)
+#define MPLL_SEL_MOUT_MPLLFOUT	(2 << 8)
+#define MUX_CPLL_SEL_MASK	(1 << 8)
+#define MUX_EPLL_SEL_MASK	(1 << 12)
+#define MUX_VPLL_SEL_MASK	(1 << 16)
+#define MUX_GPLL_SEL_MASK	(1 << 28)
+#define MUX_BPLL_SEL_MASK	(1 << 0)
+#define MUX_HPM_SEL_MASK	(1 << 20)
+#define HPM_SEL_SCLK_MPLL	(1 << 21)
+#define PLL_LOCKED		(1 << 29)
+#define APLL_CON0_LOCKED	(1 << 29)
+#define MPLL_CON0_LOCKED	(1 << 29)
+#define BPLL_CON0_LOCKED	(1 << 29)
+#define CPLL_CON0_LOCKED	(1 << 29)
+#define EPLL_CON0_LOCKED	(1 << 29)
+#define GPLL_CON0_LOCKED	(1 << 29)
+#define VPLL_CON0_LOCKED	(1 << 29)
+#define CLK_REG_DISABLE		0x0
+#define TOP2_VAL		0x0110000
+
+/* SCLK_SRC_ISP - set SPI0/1 to 6 = SCLK_MPLL_USER */
+#define SPI0_ISP_SEL		6
+#define SPI1_ISP_SEL		6
+#define SCLK_SRC_ISP_VAL	(SPI1_ISP_SEL << 4) \
+				| (SPI0_ISP_SEL << 0)
+
+/* SCLK_DIV_ISP - set SPI0/1 to 0xf = divide by 16 */
+#define SPI0_ISP_RATIO		0xf
+#define SPI1_ISP_RATIO		0xf
+#define SCLK_DIV_ISP_VAL	(SPI1_ISP_RATIO << 12) \
+				| (SPI0_ISP_RATIO << 0)
+
+/* CLK_DIV_FSYS2 */
+#define MMC2_RATIO_MASK		0xf
+#define MMC2_RATIO_VAL		0x3
+#define MMC2_RATIO_OFFSET	0
+
+#define MMC2_PRE_RATIO_MASK	0xff
+#define MMC2_PRE_RATIO_VAL	0x9
+#define MMC2_PRE_RATIO_OFFSET	8
+
+#define MMC3_RATIO_MASK		0xf
+#define MMC3_RATIO_VAL		0x1
+#define MMC3_RATIO_OFFSET	16
+
+#define MMC3_PRE_RATIO_MASK	0xff
+#define MMC3_PRE_RATIO_VAL	0x0
+#define MMC3_PRE_RATIO_OFFSET	24
+
+/* CLK_SRC_LEX */
+#define CLK_SRC_LEX_VAL         0x0
+
+/* CLK_DIV_LEX */
+#define CLK_DIV_LEX_VAL         0x10
+
+/* CLK_DIV_R0X */
+#define CLK_DIV_R0X_VAL         0x10
+
+/* CLK_DIV_L0X */
+#define CLK_DIV_R1X_VAL         0x10
+
+/* CLK_DIV_ISP2 */
+#define CLK_DIV_ISP2_VAL        0x1
+
+/* CLK_SRC_KFC */
+#define SRC_KFC_HPM_SEL		(1 << 15)
+
+/* CLK_SRC_KFC */
+#define CLK_SRC_KFC_VAL		0x00008001
+
+/* CLK_DIV_KFC */
+#define CLK_DIV_KFC_VAL		0x03300110
+
+/* CLK_DIV2_RATIO */
+#define CLK_DIV2_RATIO		0x10111150
+
+/* CLK_DIV4_RATIO */
+#define CLK_DIV4_RATIO		0x00000003
+
+/* CLK_DIV_G2D */
+#define CLK_DIV_G2D		0x00000010
+
+/*
+ * DIV_DISP1_0
+ * For DP, divisor should be 2
+ */
+#define CLK_DIV_DISP1_0_FIMD1	(2 << 0)
+
+/* CLK_GATE_IP_DISP1 */
+#define CLK_GATE_DP1_ALLOW	(1 << 4)
+
+/* AUDIO CLK SEL */
+#define AUDIO0_SEL_EPLL		(0x6 << 28)
+#define AUDIO0_RATIO		0x5
+#define PCM0_RATIO		0x3
+#define DIV_MAU_VAL		(PCM0_RATIO << 24 | AUDIO0_RATIO << 20)
+
+/* CLK_SRC_CDREX */
+#define MUX_MCLK_CDR_MSPLL	(1 << 4)
+#define MUX_BPLL_SEL_FOUTBPLL   (1 << 0)
+#define BPLL_SEL_MASK   0x7
+#define FOUTBPLL        2
+
+#define DDR3PHY_CTRL_PHY_RESET	(1 << 0)
+#define DDR3PHY_CTRL_PHY_RESET_OFF	(0 << 0)
+
+#define PHY_CON0_RESET_VAL	0x17020a40
+#define P0_CMD_EN		(1 << 14)
+#define BYTE_RDLVL_EN		(1 << 13)
+#define CTRL_SHGATE		(1 << 8)
+
+#define PHY_CON1_RESET_VAL	0x09210100
+#define RDLVL_PASS_ADJ_VAL	0x6
+#define RDLVL_PASS_ADJ_OFFSET	16
+#define CTRL_GATEDURADJ_MASK	(0xf << 20)
+#define READ_LEVELLING_DDR3	0x0100
+
+#define PHY_CON2_RESET_VAL	0x00010004
+#define INIT_DESKEW_EN		(1 << 6)
+#define DLL_DESKEW_EN		(1 << 12)
+#define RDLVL_GATE_EN		(1 << 24)
+#define RDLVL_EN		(1 << 25)
+#define RDLVL_INCR_ADJ		(0x1 << 16)
+
+/* DREX_PAUSE */
+#define DREX_PAUSE_EN	(1 << 0)
+
+#define BYPASS_EN	(1 << 22)
+
+/* MEMMORY VAL */
+#define PHY_CON0_VAL	0x17021A00
+
+#define PHY_CON12_RESET_VAL	0x10100070
+#define PHY_CON12_VAL		0x10107F50
+#define CTRL_START		(1 << 6)
+#define CTRL_DLL_ON		(1 << 5)
+#define CTRL_FORCE_MASK		(0x7F << 8)
+#define CTRL_LOCK_COARSE_MASK	(0x7F << 10)
+
+#define CTRL_OFFSETD_RESET_VAL	0x8
+#define CTRL_OFFSETD_VAL	0x7F
+
+#define CTRL_OFFSETR0		0x7F
+#define CTRL_OFFSETR1		0x7F
+#define CTRL_OFFSETR2		0x7F
+#define CTRL_OFFSETR3		0x7F
+#define PHY_CON4_VAL	(CTRL_OFFSETR0 << 0 | \
+				CTRL_OFFSETR1 << 8 | \
+				CTRL_OFFSETR2 << 16 | \
+				CTRL_OFFSETR3 << 24)
+#define PHY_CON4_RESET_VAL	0x08080808
+
+#define CTRL_OFFSETW0		0x7F
+#define CTRL_OFFSETW1		0x7F
+#define CTRL_OFFSETW2		0x7F
+#define CTRL_OFFSETW3		0x7F
+#define PHY_CON6_VAL	(CTRL_OFFSETW0 << 0 | \
+				CTRL_OFFSETW1 << 8 | \
+				CTRL_OFFSETW2 << 16 | \
+				CTRL_OFFSETW3 << 24)
+#define PHY_CON6_RESET_VAL	0x08080808
+
+#define PHY_CON14_RESET_VAL	0x001F0000
+#define CTRL_PULLD_DQS		0xF
+#define CTRL_PULLD_DQS_OFFSET	0
+
+/* ZQ Configurations */
+#define PHY_CON16_RESET_VAL	0x08000304
+
+#define ZQ_CLK_EN		(1 << 27)
+#define ZQ_CLK_DIV_EN		(1 << 18)
+#define ZQ_MANUAL_STR		(1 << 1)
+#define ZQ_DONE			(1 << 0)
+#define ZQ_MODE_DDS_OFFSET	24
+
+#define CTRL_RDLVL_GATE_ENABLE	1
+#define CTRL_RDLVL_GATE_DISABLE	0
+#define CTRL_RDLVL_DATA_ENABLE	2
+
+/* Direct Command */
+#define DIRECT_CMD_NOP			0x07000000
+#define DIRECT_CMD_PALL			0x01000000
+#define DIRECT_CMD_ZQINIT		0x0a000000
+#define DIRECT_CMD_CHANNEL_SHIFT	28
+#define DIRECT_CMD_CHIP_SHIFT		20
+#define DIRECT_CMD_BANK_SHIFT		16
+#define DIRECT_CMD_REFA		(5 << 24)
+#define DIRECT_CMD_MRS1		0x71C00
+#define DIRECT_CMD_MRS2		0x10BFC
+#define DIRECT_CMD_MRS3		0x0050C
+#define DIRECT_CMD_MRS4		0x00868
+#define DIRECT_CMD_MRS5		0x00C04
+
+/* Drive Strength */
+#define IMPEDANCE_48_OHM	4
+#define IMPEDANCE_40_OHM	5
+#define IMPEDANCE_34_OHM	6
+#define IMPEDANCE_30_OHM	7
+#define PHY_CON39_VAL_48_OHM	0x09240924
+#define PHY_CON39_VAL_40_OHM	0x0B6D0B6D
+#define PHY_CON39_VAL_34_OHM	0x0DB60DB6
+#define PHY_CON39_VAL_30_OHM	0x0FFF0FFF
+
+#define CTRL_BSTLEN_OFFSET	8
+#define CTRL_RDLAT_OFFSET	0
+
+#define CMD_DEFAULT_LPDDR3	0xF
+#define CMD_DEFUALT_OFFSET	0
+#define T_WRDATA_EN		0x7
+#define T_WRDATA_EN_DDR3	0x8
+#define T_WRDATA_EN_OFFSET	16
+#define T_WRDATA_EN_MASK	0x1f
+
+#define PHY_CON31_VAL	0x0C183060
+#define PHY_CON32_VAL	0x60C18306
+#define PHY_CON33_VAL	0x00000030
+
+#define PHY_CON31_RESET_VAL	0x0
+#define PHY_CON32_RESET_VAL	0x0
+#define PHY_CON33_RESET_VAL	0x0
+
+#define SL_DLL_DYN_CON_EN	(1 << 1)
+#define FP_RESYNC	(1 << 3)
+#define CTRL_START	(1 << 6)
+
+#define DMC_AREF_EN		(1 << 5)
+#define DMC_CONCONTROL_EMPTY	(1 << 8)
+#define DFI_INIT_START		(1 << 28)
+
+#define DMC_MEMCONTROL_VAL	0x00312700
+#define CLK_STOP_EN		(1 << 0)
+#define DPWRDN_EN		(1 << 1)
+#define DSREF_EN		(1 << 5)
+
+#define MEMBASECONFIG_CHIP_MASK_VAL	0x7E0
+#define MEMBASECONFIG_CHIP_MASK_OFFSET	0
+#define MEMBASECONFIG0_CHIP_BASE_VAL	0x20
+#define MEMBASECONFIG1_CHIP_BASE_VAL	0x40
+#define CHIP_BASE_OFFSET		16
+
+#define MEMCONFIG_VAL	0x1323
+#define PRECHCONFIG_DEFAULT_VAL	0xFF000000
+#define PWRDNCONFIG_DEFAULT_VAL	0xFFFF00FF
+
+#define TIMINGAREF_VAL	0x5d
+#define TIMINGROW_VAL	0x345A8692
+#define TIMINGDATA_VAL	0x3630065C
+#define TIMINGPOWER_VAL	0x50380336
+#define DFI_INIT_COMPLETE	(1 << 3)
+
+#define BRBRSVCONTROL_VAL	0x00000033
+#define BRBRSVCONFIG_VAL	0x88778877
+
+/* Clock Gating Control (CGCONTROL) register */
+#define MEMIF_CG_EN	(1 << 3) /* Memory interface clock gating */
+#define SCG_CG_EN	(1 << 2) /* Scheduler clock gating */
+#define BUSIF_WR_CG_EN	(1 << 1) /* Bus interface write channel clock gating */
+#define BUSIF_RD_CG_EN	(1 << 0) /* Bus interface read channel clock gating */
+#define DMC_INTERNAL_CG	(MEMIF_CG_EN | SCG_CG_EN | \
+				 BUSIF_WR_CG_EN | BUSIF_RD_CG_EN)
+
+/* DMC PHY Control0 register */
+#define PHY_CONTROL0_RESET_VAL	0x0
+#define MEM_TERM_EN	(1 << 31)	/* Termination enable for memory */
+#define PHY_TERM_EN	(1 << 30)	/* Termination enable for PHY */
+#define DMC_CTRL_SHGATE	(1 << 29)	/* Duration of DQS gating signal */
+#define FP_RSYNC	(1 << 3)	/* Force DLL resyncronization */
+
+/* Driver strength for CK, CKE, CS & CA */
+#define IMP_OUTPUT_DRV_40_OHM	0x5
+#define IMP_OUTPUT_DRV_30_OHM	0x7
+#define DA_3_DS_OFFSET		25
+#define DA_2_DS_OFFSET		22
+#define DA_1_DS_OFFSET		19
+#define DA_0_DS_OFFSET		16
+#define CA_CK_DRVR_DS_OFFSET	9
+#define CA_CKE_DRVR_DS_OFFSET	6
+#define CA_CS_DRVR_DS_OFFSET	3
+#define CA_ADR_DRVR_DS_OFFSET	0
+
+#define PHY_CON42_CTRL_BSTLEN_SHIFT	8
+#define PHY_CON42_CTRL_RDLAT_SHIFT	0
+
+/*
+ * Definitions that differ with SoC's.
+ * Below is the part defining macros for smdk5250.
+ * Else part introduces macros for smdk5420.
+ */
+#ifndef CONFIG_SMDK5420
+
+/* APLL_CON1 */
+#define APLL_CON1_VAL	(0x00203800)
+
+/* MPLL_CON1 */
+#define MPLL_CON1_VAL   (0x00203800)
+
+/* CPLL_CON1 */
+#define CPLL_CON1_VAL	(0x00203800)
+
+/* DPLL_CON1 */
+#define DPLL_CON1_VAL	(NOT_AVAILABLE)
+
+/* GPLL_CON1 */
+#define GPLL_CON1_VAL	(0x00203800)
+
+/* EPLL_CON1, CON2 */
+#define EPLL_CON1_VAL	0x00000000
+#define EPLL_CON2_VAL	0x00000080
+
+/* VPLL_CON1, CON2 */
+#define VPLL_CON1_VAL	0x00000000
+#define VPLL_CON2_VAL	0x00000080
+
+/* RPLL_CON1, CON2 */
+#define RPLL_CON1_VAL	NOT_AVAILABLE
+#define RPLL_CON2_VAL	NOT_AVAILABLE
+
+/* BPLL_CON1 */
+#define BPLL_CON1_VAL	0x00203800
+
+/* SPLL_CON1 */
+#define SPLL_CON1_VAL	NOT_AVAILABLE
+
+/* IPLL_CON1 */
+#define IPLL_CON1_VAL	NOT_AVAILABLE
+
+/* KPLL_CON1 */
+#define KPLL_CON1_VAL	NOT_AVAILABLE
+
+/* CLK_SRC_ISP */
+#define CLK_SRC_ISP_VAL		NOT_AVAILABLE
+#define CLK_DIV_ISP0_VAL	0x31
+#define CLK_DIV_ISP1_VAL	0x0
+
+/* CLK_FSYS */
+#define CLK_SRC_FSYS0_VAL              0x66666
+#define CLK_DIV_FSYS0_VAL	       0x0BB00000
+#define CLK_DIV_FSYS1_VAL	       NOT_AVAILABLE
+#define CLK_DIV_FSYS2_VAL	       NOT_AVAILABLE
+
+/* CLK_SRC_CPU */
+/* 0 = MOUTAPLL,  1 = SCLKMPLL */
+#define MUX_HPM_SEL             0
+#define MUX_CPU_SEL             0
+#define MUX_APLL_SEL            1
+
+#define CLK_SRC_CPU_VAL		((MUX_HPM_SEL << 20)    \
+				| (MUX_CPU_SEL << 16)  \
+				| (MUX_APLL_SEL))
+
 /* CLK_SRC_CDREX */
 #define CLK_SRC_CDREX_VAL       0x1
 
 /* CLK_DIV_CDREX */
+#define CLK_DIV_CDREX0_VAL	NOT_AVAILABLE
+#define CLK_DIV_CDREX1_VAL	NOT_AVAILABLE
+
+/* CLK_DIV_CPU0_VAL */
+#define CLK_DIV_CPU0_VAL	NOT_AVAILABLE
+
 #define MCLK_CDREX2_RATIO       0x0
 #define ACLK_EFCON_RATIO        0x1
 #define MCLK_DPHY_RATIO		0x1
@@ -247,6 +585,11 @@
 				| (MUX_ACLK_300_DISP1_SUB_SEL << 6)     \
 				| (MUX_ACLK_200_DISP1_SUB_SEL << 4))
 
+#define CLK_SRC_TOP4_VAL	NOT_AVAILABLE
+#define CLK_SRC_TOP5_VAL	NOT_AVAILABLE
+#define CLK_SRC_TOP6_VAL	NOT_AVAILABLE
+#define CLK_SRC_TOP7_VAL	NOT_AVAILABLE
+
 /* CLK_DIV_TOP0	*/
 #define ACLK_300_DISP1_RATIO	0x2
 #define ACLK_400_G3D_RATIO	0x0
@@ -279,40 +622,11 @@
 				| (ACLK_400_IOP_RATIO << 16)		\
 				| (ACLK_300_GSCL_RATIO << 12))
 
-/* APLL_LOCK	*/
-#define APLL_LOCK_VAL	(0x546)
-/* MPLL_LOCK	*/
-#define MPLL_LOCK_VAL	(0x546)
-/* CPLL_LOCK	*/
-#define CPLL_LOCK_VAL	(0x546)
-/* GPLL_LOCK	*/
-#define GPLL_LOCK_VAL	(0x546)
-/* EPLL_LOCK	*/
-#define EPLL_LOCK_VAL	(0x3A98)
-/* VPLL_LOCK	*/
-#define VPLL_LOCK_VAL	(0x3A98)
-/* BPLL_LOCK	*/
-#define BPLL_LOCK_VAL	(0x546)
+#define CLK_DIV_TOP2_VAL	NOT_AVAILABLE
 
-#define MUX_APLL_SEL_MASK	(1 << 0)
-#define MUX_MPLL_SEL_MASK	(1 << 8)
-#define MPLL_SEL_MOUT_MPLLFOUT	(2 << 8)
-#define MUX_CPLL_SEL_MASK	(1 << 8)
-#define MUX_EPLL_SEL_MASK	(1 << 12)
-#define MUX_VPLL_SEL_MASK	(1 << 16)
-#define MUX_GPLL_SEL_MASK	(1 << 28)
-#define MUX_BPLL_SEL_MASK	(1 << 0)
-#define MUX_HPM_SEL_MASK	(1 << 20)
-#define HPM_SEL_SCLK_MPLL	(1 << 21)
-#define APLL_CON0_LOCKED	(1 << 29)
-#define MPLL_CON0_LOCKED	(1 << 29)
-#define BPLL_CON0_LOCKED	(1 << 29)
-#define CPLL_CON0_LOCKED	(1 << 29)
-#define EPLL_CON0_LOCKED	(1 << 29)
-#define GPLL_CON0_LOCKED	(1 << 29)
-#define VPLL_CON0_LOCKED	(1 << 29)
-#define CLK_REG_DISABLE		0x0
-#define TOP2_VAL		0x0110000
+/* PLL Lock Value Factor */
+#define PLL_LOCK_FACTOR		250
+#define PLL_X_LOCK_FACTOR	3000
 
 /* CLK_SRC_PERIC0 */
 #define PWM_SEL		6
@@ -336,18 +650,6 @@
 				| (SPI1_SEL << 20) \
 				| (SPI0_SEL << 16))
 
-/* SCLK_SRC_ISP - set SPI0/1 to 6 = SCLK_MPLL_USER */
-#define SPI0_ISP_SEL		6
-#define SPI1_ISP_SEL		6
-#define SCLK_SRC_ISP_VAL	(SPI1_ISP_SEL << 4) \
-				| (SPI0_ISP_SEL << 0)
-
-/* SCLK_DIV_ISP - set SPI0/1 to 0xf = divide by 16 */
-#define SPI0_ISP_RATIO		0xf
-#define SPI1_ISP_RATIO		0xf
-#define SCLK_DIV_ISP_VAL	(SPI1_ISP_RATIO << 12) \
-				| (SPI0_ISP_RATIO << 0)
-
 /* CLK_DIV_PERIL0	*/
 #define UART5_RATIO	7
 #define UART4_RATIO	7
@@ -380,105 +682,201 @@
 #define PWM_RATIO		8
 #define CLK_DIV_PERIC3_VAL	(PWM_RATIO << 0)
 
-/* CLK_DIV_FSYS2 */
-#define MMC2_RATIO_MASK		0xf
-#define MMC2_RATIO_VAL		0x3
-#define MMC2_RATIO_OFFSET	0
 
-#define MMC2_PRE_RATIO_MASK	0xff
-#define MMC2_PRE_RATIO_VAL	0x9
-#define MMC2_PRE_RATIO_OFFSET	8
+/* CLK_DIV_PERIC4 */
+#define CLK_DIV_PERIC4_VAL	NOT_AVAILABLE
 
-#define MMC3_RATIO_MASK		0xf
-#define MMC3_RATIO_VAL		0x1
-#define MMC3_RATIO_OFFSET	16
+/* CLK_SRC_DISP1_0 */
+#define CLK_SRC_DISP1_0_VAL	0x6
+#define CLK_DIV_DISP1_0_VAL	NOT_AVAILABLE
 
-#define MMC3_PRE_RATIO_MASK	0xff
-#define MMC3_PRE_RATIO_VAL	0x0
-#define MMC3_PRE_RATIO_OFFSET	24
+#define APLL_FOUT		(1 << 0)
+#define KPLL_FOUT		NOT_AVAILABLE
 
-/* CLK_SRC_LEX */
-#define CLK_SRC_LEX_VAL         0x0
+#define CLK_DIV_CPERI1_VAL	NOT_AVAILABLE
 
-/* CLK_DIV_LEX */
-#define CLK_DIV_LEX_VAL         0x10
+#else
+#define PAD_RETENTION_DRAM_COREBLK_VAL	0x10000000
 
-/* CLK_DIV_R0X */
-#define CLK_DIV_R0X_VAL         0x10
+/* APLL_CON1 */
+#define APLL_CON1_VAL	(0x0020F300)
 
-/* CLK_DIV_L0X */
-#define CLK_DIV_R1X_VAL         0x10
+/* MPLL_CON1 */
+#define MPLL_CON1_VAL   (0x0020F300)
 
-/* CLK_DIV_ISP0 */
-#define CLK_DIV_ISP0_VAL        0x31
 
-/* CLK_DIV_ISP1 */
-#define CLK_DIV_ISP1_VAL        0x0
+/* CPLL_CON1 */
+#define CPLL_CON1_VAL	0x0020f300
 
-/* CLK_DIV_ISP2 */
-#define CLK_DIV_ISP2_VAL        0x1
+/* DPLL_CON1 */
+#define DPLL_CON1_VAL	(0x0020F300)
 
-/* CLK_SRC_DISP1_0 */
-#define CLK_SRC_DISP1_0_VAL	0x6
+/* GPLL_CON1 */
+#define GPLL_CON1_VAL	(NOT_AVAILABLE)
 
-/*
- * DIV_DISP1_0
- * For DP, divisor should be 2
- */
-#define CLK_DIV_DISP1_0_FIMD1	(2 << 0)
 
-/* CLK_GATE_IP_DISP1 */
-#define CLK_GATE_DP1_ALLOW	(1 << 4)
+/* EPLL_CON1, CON2 */
+#define EPLL_CON1_VAL	0x00000000
+#define EPLL_CON2_VAL	0x00000080
 
-#define DDR3PHY_CTRL_PHY_RESET	(1 << 0)
-#define DDR3PHY_CTRL_PHY_RESET_OFF	(0 << 0)
+/* VPLL_CON1, CON2 */
+#define VPLL_CON1_VAL	0x0020f300
+#define VPLL_CON2_VAL	NOT_AVAILABLE
 
-#define PHY_CON0_RESET_VAL	0x17020a40
-#define P0_CMD_EN		(1 << 14)
-#define BYTE_RDLVL_EN		(1 << 13)
-#define CTRL_SHGATE		(1 << 8)
+/* RPLL_CON1, CON2 */
+#define RPLL_CON1_VAL	0x00000000
+#define RPLL_CON2_VAL	0x00000080
 
-#define PHY_CON1_RESET_VAL	0x09210100
-#define CTRL_GATEDURADJ_MASK	(0xf << 20)
+/* BPLL_CON1 */
+#define BPLL_CON1_VAL	0x0020f300
 
-#define PHY_CON2_RESET_VAL	0x00010004
-#define INIT_DESKEW_EN		(1 << 6)
-#define RDLVL_GATE_EN		(1 << 24)
+/* SPLL_CON1 */
+#define SPLL_CON1_VAL	0x0020f300
 
-/*ZQ Configurations */
-#define PHY_CON16_RESET_VAL	0x08000304
+/* IPLL_CON1 */
+#define IPLL_CON1_VAL	0x00000080
 
-#define ZQ_CLK_DIV_EN		(1 << 18)
-#define ZQ_MANUAL_STR		(1 << 1)
-#define ZQ_DONE			(1 << 0)
+/* KPLL_CON1 */
+#define KPLL_CON1_VAL	0x200000
 
-#define CTRL_RDLVL_GATE_ENABLE	1
-#define CTRL_RDLVL_GATE_DISABLE	1
+/* CLK_SRC_ISP */
+#define CLK_SRC_ISP_VAL		0x33366000
+#define CLK_DIV_ISP0_VAL	0x13131300
+#define CLK_DIV_ISP1_VAL	0xbb110202
 
-/* Direct Command */
-#define DIRECT_CMD_NOP			0x07000000
-#define DIRECT_CMD_PALL			0x01000000
-#define DIRECT_CMD_ZQINIT		0x0a000000
-#define DIRECT_CMD_CHANNEL_SHIFT	28
-#define DIRECT_CMD_CHIP_SHIFT		20
 
-/* DMC PHY Control0 register */
-#define PHY_CONTROL0_RESET_VAL	0x0
-#define MEM_TERM_EN	(1 << 31)	/* Termination enable for memory */
-#define PHY_TERM_EN	(1 << 30)	/* Termination enable for PHY */
-#define DMC_CTRL_SHGATE	(1 << 29)	/* Duration of DQS gating signal */
-#define FP_RSYNC	(1 << 3)	/* Force DLL resyncronization */
+/* CLK_FSYS */
+#define CLK_SRC_FSYS0_VAL              0x33033300
+#define CLK_DIV_FSYS0_VAL	       0x0
+#define CLK_DIV_FSYS1_VAL	       0x04f13c4f
+#define CLK_DIV_FSYS2_VAL	       0x041d0000
+
+/* CLK_SRC_CPU */
+/* 0 = MOUTAPLL,  1 = SCLKMPLL */
+#define MUX_HPM_SEL             1
+#define MUX_CPU_SEL             0
+#define MUX_APLL_SEL            1
 
-/* Driver strength for CK, CKE, CS & CA */
-#define IMP_OUTPUT_DRV_40_OHM	0x5
-#define IMP_OUTPUT_DRV_30_OHM	0x7
-#define CA_CK_DRVR_DS_OFFSET	9
-#define CA_CKE_DRVR_DS_OFFSET	6
-#define CA_CS_DRVR_DS_OFFSET	3
-#define CA_ADR_DRVR_DS_OFFSET	0
+#define CLK_SRC_CPU_VAL		((MUX_HPM_SEL << 20)    \
+				| (MUX_CPU_SEL << 16)  \
+				| (MUX_APLL_SEL))
 
-#define PHY_CON42_CTRL_BSTLEN_SHIFT	8
-#define PHY_CON42_CTRL_RDLAT_SHIFT	0
+/* CLK_SRC_CDREX */
+#define CLK_SRC_CDREX_VAL       0x00000011
+
+/* CLK_DIV_CDREX */
+#define CLK_DIV_CDREX0_VAL	0x30010100
+#define CLK_DIV_CDREX1_VAL	0x300
+
+#define CLK_DIV_CDREX_VAL       0x17010100
+
+/* CLK_DIV_CPU0_VAL */
+#define CLK_DIV_CPU0_VAL	0x01440020
+
+/* CLK_SRC_TOP */
+#define CLK_SRC_TOP0_VAL	0x12221222
+#define CLK_SRC_TOP1_VAL	0x00100200
+#define CLK_SRC_TOP2_VAL	0x11101000
+#define CLK_SRC_TOP3_VAL	0x11111111
+#define CLK_SRC_TOP4_VAL	0x11110111
+#define CLK_SRC_TOP5_VAL	0x11111100
+#define CLK_SRC_TOP6_VAL	0x11110111
+#define CLK_SRC_TOP7_VAL	0x00022200
+
+/* CLK_DIV_TOP */
+#define CLK_DIV_TOP0_VAL	0x23712311
+#define CLK_DIV_TOP1_VAL	0x13100B00
+#define CLK_DIV_TOP2_VAL	0x11101100
+
+/* PLL Lock Value Factor */
+#define PLL_LOCK_FACTOR		200
+#define PLL_X_LOCK_FACTOR	3000
+
+/* CLK_SRC_PERIC0 */
+#define SPDIF_SEL	1
+#define PWM_SEL		3
+#define UART4_SEL	3
+#define UART3_SEL	3
+#define UART2_SEL	3
+#define UART1_SEL	3
+#define UART0_SEL	3
+/* SRC_CLOCK = SCLK_RPLL */
+#define CLK_SRC_PERIC0_VAL	((SPDIF_SEL << 28)	\
+				| (PWM_SEL << 24)	\
+				| (UART4_SEL << 20)	\
+				| (UART3_SEL << 16)	\
+				| (UART2_SEL << 12)	\
+				| (UART1_SEL << 8)	\
+				| (UART0_SEL << 4))
+
+/* CLK_SRC_PERIC1 */
+/* SRC_CLOCK = SCLK_EPLL */
+#define SPI0_SEL		6
+#define SPI1_SEL		6
+#define SPI2_SEL		6
+#define AUDIO0_SEL		6
+#define AUDIO1_SEL		6
+#define AUDIO2_SEL		6
+#define CLK_SRC_PERIC1_VAL	((SPI2_SEL << 28)	\
+				| (SPI1_SEL << 24)	\
+				| (SPI0_SEL << 20)	\
+				| (AUDIO2_SEL << 16)	\
+				| (AUDIO2_SEL << 12)	\
+				| (AUDIO2_SEL << 8))
+
+/* CLK_DIV_PERIC0 */
+#define PWM_RATIO	8
+#define UART4_RATIO	9
+#define UART3_RATIO	9
+#define UART2_RATIO	9
+#define UART1_RATIO	9
+#define UART0_RATIO	9
+
+#define CLK_DIV_PERIC0_VAL	((PWM_RATIO << 28)	\
+				| (UART4_RATIO << 24)	\
+				| (UART3_RATIO << 20)    \
+				| (UART2_RATIO << 16)    \
+				| (UART1_RATIO << 12)    \
+				| (UART0_RATIO << 8))
+/* CLK_DIV_PERIC1 */
+#define SPI2_RATIO		0x1
+#define SPI1_RATIO		0x1
+#define SPI0_RATIO		0x1
+#define CLK_DIV_PERIC1_VAL	((SPI2_RATIO << 28)	\
+				| (SPI1_RATIO << 24)	\
+				| (SPI0_RATIO << 20))
+
+/* CLK_DIV_PERIC2 */
+#define PCM2_RATIO		0x3
+#define PCM1_RATIO		0x3
+#define CLK_DIV_PERIC2_VAL	((PCM2_RATIO << 24) \
+				| (PCM1_RATIO << 16))
+
+/* CLK_DIV_PERIC3 */
+#define AUDIO2_RATIO		0x5
+#define AUDIO1_RATIO		0x5
+#define AUDIO0_RATIO		0x5
+#define CLK_DIV_PERIC3_VAL	((AUDIO2_RATIO << 28)	\
+				| (AUDIO1_RATIO << 24)	\
+				| (AUDIO0_RATIO << 20))
+
+/* CLK_DIV_PERIC4 */
+#define SPI2_PRE_RATIO		0x2
+#define SPI1_PRE_RATIO		0x2
+#define SPI0_PRE_RATIO		0x2
+#define CLK_DIV_PERIC4_VAL	((SPI2_PRE_RATIO << 24)	\
+				| (SPI1_PRE_RATIO << 16) \
+				| (SPI0_PRE_RATIO << 8))
+
+/* CLK_SRC_DISP1_0 */
+#define CLK_SRC_DISP1_0_VAL	0x10666600
+#define CLK_DIV_DISP1_0_VAL	0x01050211
+
+#define APLL_FOUT		(1 << 0)
+#define KPLL_FOUT		(1 << 0)
+
+#define CLK_DIV_CPERI1_VAL	0x3f3f0000
+#endif
 
 struct mem_timings;
 
@@ -490,7 +888,7 @@ enum {
 };
 
 /*
- * Memory variant specific initialization code
+ * Memory variant specific initialization code for DDR3
  *
  * @param mem		Memory timings for this memory type.
  * @param mem_iv_size	Memory interleaving size is a configurable parameter
@@ -503,49 +901,45 @@ enum {
 int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size,
 			int reset);
 
+/* Memory variant specific initialization code for LPDDR3 */
+void lpddr3_mem_ctrl_init(void);
+
 /*
  * Configure ZQ I/O interface
  *
  * @param mem		Memory timings for this memory type.
- * @param phy0_ctrl	Pointer to struct containing PHY0 control reg
- * @param phy1_ctrl	Pointer to struct containing PHY1 control reg
+ * @param phy0_con16	Register address for dmc_phy0->phy_con16
+ * @param phy1_con16	Register address for dmc_phy1->phy_con16
+ * @param phy0_con17	Register address for dmc_phy0->phy_con17
+ * @param phy1_con17	Register address for dmc_phy1->phy_con17
  * @return 0 if ok, -1 on error
  */
-int dmc_config_zq(struct mem_timings *mem,
-		  struct exynos5_phy_control *phy0_ctrl,
-		  struct exynos5_phy_control *phy1_ctrl);
-
+int dmc_config_zq(struct mem_timings *mem, uint32_t *phy0_con16,
+			uint32_t *phy1_con16, uint32_t *phy0_con17,
+			uint32_t *phy1_con17);
 /*
  * Send NOP and MRS/EMRS Direct commands
  *
  * @param mem		Memory timings for this memory type.
- * @param dmc		Pointer to struct of DMC registers
+ * @param directcmd	Register address for dmc_phy->directcmd
  */
-void dmc_config_mrs(struct mem_timings *mem, struct exynos5_dmc *dmc);
+void dmc_config_mrs(struct mem_timings *mem, uint32_t *directcmd);
 
 /*
  * Send PALL Direct commands
  *
  * @param mem		Memory timings for this memory type.
- * @param dmc		Pointer to struct of DMC registers
- */
-void dmc_config_prech(struct mem_timings *mem, struct exynos5_dmc *dmc);
-
-/*
- * Configure the memconfig and membaseconfig registers
- *
- * @param mem		Memory timings for this memory type.
- * @param exynos5_dmc	Pointer to struct of DMC registers
+ * @param directcmd	Register address for dmc_phy->directcmd
  */
-void dmc_config_memory(struct mem_timings *mem, struct exynos5_dmc *dmc);
+void dmc_config_prech(struct mem_timings *mem, uint32_t *directcmd);
 
 /*
  * Reset the DLL. This function is common between DDR3 and LPDDR2.
  * However, the reset value is different. So we are passing a flag
  * ddr_mode to distinguish between LPDDR2 and DDR3.
  *
- * @param exynos5_dmc	Pointer to struct of DMC registers
+ * @param phycontrol0	Register address for dmc_phy->phycontrol0
  * @param ddr_mode	Type of DDR memory
  */
-void update_reset_dll(struct exynos5_dmc *, enum ddr_mode);
+void update_reset_dll(uint32_t *phycontrol0, enum ddr_mode);
 #endif
diff --git a/arch/arm/cpu/armv7/exynos/pinmux.c b/arch/arm/cpu/armv7/exynos/pinmux.c
index 74cc7009ff..904177a149 100644
--- a/arch/arm/cpu/armv7/exynos/pinmux.c
+++ b/arch/arm/cpu/armv7/exynos/pinmux.c
@@ -46,6 +46,42 @@ static void exynos5_uart_config(int peripheral)
 	}
 }
 
+static void exynos5420_uart_config(int peripheral)
+{
+	struct exynos5420_gpio_part1 *gpio1 =
+		(struct exynos5420_gpio_part1 *)samsung_get_base_gpio_part1();
+	struct s5p_gpio_bank *bank;
+	int i, start, count;
+
+	switch (peripheral) {
+	case PERIPH_ID_UART0:
+		bank = &gpio1->a0;
+		start = 0;
+		count = 4;
+		break;
+	case PERIPH_ID_UART1:
+		bank = &gpio1->a0;
+		start = 4;
+		count = 4;
+		break;
+	case PERIPH_ID_UART2:
+		bank = &gpio1->a1;
+		start = 0;
+		count = 4;
+		break;
+	case PERIPH_ID_UART3:
+		bank = &gpio1->a1;
+		start = 4;
+		count = 2;
+		break;
+	}
+
+	for (i = start; i < start + count; i++) {
+		s5p_gpio_set_pull(bank, i, GPIO_PULL_NONE);
+		s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2));
+	}
+}
+
 static int exynos5_mmc_config(int peripheral, int flags)
 {
 	struct exynos5_gpio_part1 *gpio1 =
@@ -101,6 +137,75 @@ static int exynos5_mmc_config(int peripheral, int flags)
 	return 0;
 }
 
+static int exynos5420_mmc_config(int peripheral, int flags)
+{
+	struct exynos5420_gpio_part3 *gpio3 =
+		(struct exynos5420_gpio_part3 *)samsung_get_base_gpio_part3();
+	struct s5p_gpio_bank *bank = NULL, *bank_ext = NULL;
+	int i, start;
+
+	switch (peripheral) {
+	case PERIPH_ID_SDMMC0:
+		bank = &gpio3->c0;
+		bank_ext = &gpio3->c3;
+		start = 0;
+		break;
+	case PERIPH_ID_SDMMC1:
+		bank = &gpio3->c1;
+		bank_ext = &gpio3->d1;
+		start = 4;
+		break;
+	case PERIPH_ID_SDMMC2:
+		bank = &gpio3->c2;
+		bank_ext = NULL;
+		start = 0;
+		break;
+	default:
+		start = 0;
+		debug("%s: invalid peripheral %d", __func__, peripheral);
+		return -1;
+	}
+
+	if ((flags & PINMUX_FLAG_8BIT_MODE) && !bank_ext) {
+		debug("SDMMC device %d does not support 8bit mode",
+		      peripheral);
+		return -1;
+	}
+
+	if (flags & PINMUX_FLAG_8BIT_MODE) {
+		for (i = start; i <= (start + 3); i++) {
+			s5p_gpio_cfg_pin(bank_ext, i, GPIO_FUNC(0x2));
+			s5p_gpio_set_pull(bank_ext, i, GPIO_PULL_UP);
+			s5p_gpio_set_drv(bank_ext, i, GPIO_DRV_4X);
+		}
+	}
+
+	for (i = 0; i < 3; i++) {
+		/*
+		 * MMC0 is intended to be used for eMMC. The
+		 * card detect pin is used as a VDDEN signal to
+		 * power on the eMMC. The 5420 iROM makes
+		 * this same assumption.
+		 */
+		if ((peripheral == PERIPH_ID_SDMMC0) && (i == 2)) {
+			s5p_gpio_set_value(bank, i, 1);
+			s5p_gpio_cfg_pin(bank, i, GPIO_OUTPUT);
+		} else {
+			s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2));
+		}
+		s5p_gpio_set_pull(bank, i, GPIO_PULL_NONE);
+		s5p_gpio_set_drv(bank, i, GPIO_DRV_4X);
+	}
+
+	for (i = 3; i <= 6; i++) {
+		s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2));
+		s5p_gpio_set_pull(bank, i, GPIO_PULL_UP);
+		s5p_gpio_set_drv(bank, i, GPIO_DRV_4X);
+	}
+
+	return 0;
+}
+
 static void exynos5_sromc_config(int flags)
 {
 	struct exynos5_gpio_part1 *gpio1 =
@@ -216,6 +321,59 @@ static void exynos5_i2c_config(int peripheral, int flags)
 	}
 }
 
+static void exynos5420_i2c_config(int peripheral)
+{
+	struct exynos5420_gpio_part1 *gpio1 =
+		(struct exynos5420_gpio_part1 *)samsung_get_base_gpio_part1();
+
+	switch (peripheral) {
+	case PERIPH_ID_I2C0:
+		s5p_gpio_cfg_pin(&gpio1->b3, 0, GPIO_FUNC(0x2));
+		s5p_gpio_cfg_pin(&gpio1->b3, 1, GPIO_FUNC(0x2));
+		break;
+	case PERIPH_ID_I2C1:
+		s5p_gpio_cfg_pin(&gpio1->b3, 2, GPIO_FUNC(0x2));
+		s5p_gpio_cfg_pin(&gpio1->b3, 3, GPIO_FUNC(0x2));
+		break;
+	case PERIPH_ID_I2C2:
+		s5p_gpio_cfg_pin(&gpio1->a0, 6, GPIO_FUNC(0x3));
+		s5p_gpio_cfg_pin(&gpio1->a0, 7, GPIO_FUNC(0x3));
+		break;
+	case PERIPH_ID_I2C3:
+		s5p_gpio_cfg_pin(&gpio1->a1, 2, GPIO_FUNC(0x3));
+		s5p_gpio_cfg_pin(&gpio1->a1, 3, GPIO_FUNC(0x3));
+		break;
+	case PERIPH_ID_I2C4:
+		s5p_gpio_cfg_pin(&gpio1->a2, 0, GPIO_FUNC(0x3));
+		s5p_gpio_cfg_pin(&gpio1->a2, 1, GPIO_FUNC(0x3));
+		break;
+	case PERIPH_ID_I2C5:
+		s5p_gpio_cfg_pin(&gpio1->a2, 2, GPIO_FUNC(0x3));
+		s5p_gpio_cfg_pin(&gpio1->a2, 3, GPIO_FUNC(0x3));
+		break;
+	case PERIPH_ID_I2C6:
+		s5p_gpio_cfg_pin(&gpio1->b1, 3, GPIO_FUNC(0x4));
+		s5p_gpio_cfg_pin(&gpio1->b1, 4, GPIO_FUNC(0x4));
+		break;
+	case PERIPH_ID_I2C7:
+		s5p_gpio_cfg_pin(&gpio1->b2, 2, GPIO_FUNC(0x3));
+		s5p_gpio_cfg_pin(&gpio1->b2, 3, GPIO_FUNC(0x3));
+		break;
+	case PERIPH_ID_I2C8:
+		s5p_gpio_cfg_pin(&gpio1->b3, 4, GPIO_FUNC(0x2));
+		s5p_gpio_cfg_pin(&gpio1->b3, 5, GPIO_FUNC(0x2));
+		break;
+	case PERIPH_ID_I2C9:
+		s5p_gpio_cfg_pin(&gpio1->b3, 6, GPIO_FUNC(0x2));
+		s5p_gpio_cfg_pin(&gpio1->b3, 7, GPIO_FUNC(0x2));
+		break;
+	case PERIPH_ID_I2C10:
+		s5p_gpio_cfg_pin(&gpio1->b4, 0, GPIO_FUNC(0x2));
+		s5p_gpio_cfg_pin(&gpio1->b4, 1, GPIO_FUNC(0x2));
+		break;
+	}
+}
+
 static void exynos5_i2s_config(int peripheral)
 {
 	int i;
@@ -279,6 +437,58 @@ void exynos5_spi_config(int peripheral)
 	}
 }
 
+void exynos5420_spi_config(int peripheral)
+{
+	int cfg, pin, i;
+	struct s5p_gpio_bank *bank = NULL;
+	struct exynos5420_gpio_part1 *gpio1 =
+		(struct exynos5420_gpio_part1 *)samsung_get_base_gpio_part1();
+	struct exynos5420_gpio_part4 *gpio4 =
+		(struct exynos5420_gpio_part4 *)samsung_get_base_gpio_part4();
+
+	switch (peripheral) {
+	case PERIPH_ID_SPI0:
+		bank = &gpio1->a2;
+		cfg = GPIO_FUNC(0x2);
+		pin = 0;
+		break;
+	case PERIPH_ID_SPI1:
+		bank = &gpio1->a2;
+		cfg = GPIO_FUNC(0x2);
+		pin = 4;
+		break;
+	case PERIPH_ID_SPI2:
+		bank = &gpio1->b1;
+		cfg = GPIO_FUNC(0x5);
+		pin = 1;
+		break;
+	case PERIPH_ID_SPI3:
+		bank = &gpio4->f1;
+		cfg = GPIO_FUNC(0x2);
+		pin = 0;
+		break;
+	case PERIPH_ID_SPI4:
+		cfg = 0;
+		pin = 0;
+		break;
+	default:
+		cfg = 0;
+		pin = 0;
+		debug("%s: invalid peripheral %d", __func__, peripheral);
+		return;
+	}
+
+	if (peripheral != PERIPH_ID_SPI4) {
+		for (i = pin; i < pin + 4; i++)
+			s5p_gpio_cfg_pin(bank, i, cfg);
+	} else {
+		for (i = 0; i < 2; i++) {
+			s5p_gpio_cfg_pin(&gpio4->f0, i + 2, GPIO_FUNC(0x4));
+			s5p_gpio_cfg_pin(&gpio4->e0, i + 4, GPIO_FUNC(0x4));
+		}
+	}
+}
+
 static int exynos5_pinmux_config(int peripheral, int flags)
 {
 	switch (peripheral) {
@@ -325,6 +535,48 @@ static int exynos5_pinmux_config(int peripheral, int flags)
 	return 0;
 }
 
+static int exynos5420_pinmux_config(int peripheral, int flags)
+{
+	switch (peripheral) {
+	case PERIPH_ID_UART0:
+	case PERIPH_ID_UART1:
+	case PERIPH_ID_UART2:
+	case PERIPH_ID_UART3:
+		exynos5420_uart_config(peripheral);
+		break;
+	case PERIPH_ID_SDMMC0:
+	case PERIPH_ID_SDMMC1:
+	case PERIPH_ID_SDMMC2:
+	case PERIPH_ID_SDMMC3:
+		return exynos5420_mmc_config(peripheral, flags);
+	case PERIPH_ID_SPI0:
+	case PERIPH_ID_SPI1:
+	case PERIPH_ID_SPI2:
+	case PERIPH_ID_SPI3:
+	case PERIPH_ID_SPI4:
+		exynos5420_spi_config(peripheral);
+		break;
+	case PERIPH_ID_I2C0:
+	case PERIPH_ID_I2C1:
+	case PERIPH_ID_I2C2:
+	case PERIPH_ID_I2C3:
+	case PERIPH_ID_I2C4:
+	case PERIPH_ID_I2C5:
+	case PERIPH_ID_I2C6:
+	case PERIPH_ID_I2C7:
+	case PERIPH_ID_I2C8:
+	case PERIPH_ID_I2C9:
+	case PERIPH_ID_I2C10:
+		exynos5420_i2c_config(peripheral);
+		break;
+	default:
+		debug("%s: invalid peripheral %d", __func__, peripheral);
+		return -1;
+	}
+
+	return 0;
+}
+
 static void exynos4_i2c_config(int peripheral, int flags)
 {
 	struct exynos4_gpio_part1 *gpio1 =
@@ -475,13 +727,17 @@ static int exynos4_pinmux_config(int peripheral, int flags)
 int exynos_pinmux_config(int peripheral, int flags)
 {
 	if (cpu_is_exynos5()) {
-		return exynos5_pinmux_config(peripheral, flags);
+		if (proid_is_exynos5420())
+			return exynos5420_pinmux_config(peripheral, flags);
+		else if (proid_is_exynos5250())
+			return exynos5_pinmux_config(peripheral, flags);
 	} else if (cpu_is_exynos4()) {
 		return exynos4_pinmux_config(peripheral, flags);
 	} else {
 		debug("pinmux functionality not supported\n");
-		return -1;
 	}
+
+	return -1;
 }
 
 #ifdef CONFIG_OF_CONTROL
diff --git a/arch/arm/cpu/armv7/mx5/clock.c b/arch/arm/cpu/armv7/mx5/clock.c
index fb3b128199..bf52f0d19e 100644
--- a/arch/arm/cpu/armv7/mx5/clock.c
+++ b/arch/arm/cpu/armv7/mx5/clock.c
@@ -749,6 +749,18 @@ void enable_nfc_clk(unsigned char enable)
 		MXC_CCM_CCGR5_EMI_ENFC(cg));
 }
 
+#ifdef CONFIG_FSL_IIM
+void enable_efuse_prog_supply(bool enable)
+{
+	if (enable)
+		setbits_le32(&mxc_ccm->cgpr,
+			     MXC_CCM_CGPR_EFUSE_PROG_SUPPLY_GATE);
+	else
+		clrbits_le32(&mxc_ccm->cgpr,
+			     MXC_CCM_CGPR_EFUSE_PROG_SUPPLY_GATE);
+}
+#endif
+
 /* Config main_bus_clock for periphs */
 static int config_periph_clk(u32 ref, u32 freq)
 {
diff --git a/arch/arm/cpu/armv7/mx6/clock.c b/arch/arm/cpu/armv7/mx6/clock.c
index 873d9d0fd8..fcc4f352c3 100644
--- a/arch/arm/cpu/armv7/mx6/clock.c
+++ b/arch/arm/cpu/armv7/mx6/clock.c
@@ -94,7 +94,7 @@ static u32 decode_pll(enum pll_clocks pll, u32 infreq)
 		div = __raw_readl(&imx_ccm->analog_pll_enet);
 		div &= BM_ANADIG_PLL_ENET_DIV_SELECT;
 
-		return (div == 3 ? 125000000 : 25000000 * (div << 1));
+		return 25000000 * (div + (div >> 1) + 1);
 	default:
 		return 0;
 	}
@@ -310,7 +310,18 @@ static u32 get_mmdc_ch0_clk(void)
 	return freq / (podf + 1);
 
 }
+#else
+static u32 get_mmdc_ch0_clk(void)
+{
+	u32 cbcdr = __raw_readl(&imx_ccm->cbcdr);
+	u32 mmdc_ch0_podf = (cbcdr & MXC_CCM_CBCDR_MMDC_CH0_PODF_MASK) >>
+				MXC_CCM_CBCDR_MMDC_CH0_PODF_OFFSET;
+
+	return get_periph_clk() / (mmdc_ch0_podf + 1);
+}
+#endif
 
+#ifdef CONFIG_FEC_MXC
 int enable_fec_anatop_clock(void)
 {
 	u32 reg = 0;
@@ -339,16 +350,6 @@ int enable_fec_anatop_clock(void)
 
 	return 0;
 }
-
-#else
-static u32 get_mmdc_ch0_clk(void)
-{
-	u32 cbcdr = __raw_readl(&imx_ccm->cbcdr);
-	u32 mmdc_ch0_podf = (cbcdr & MXC_CCM_CBCDR_MMDC_CH0_PODF_MASK) >>
-				MXC_CCM_CBCDR_MMDC_CH0_PODF_OFFSET;
-
-	return get_periph_clk() / (mmdc_ch0_podf + 1);
-}
 #endif
 
 static u32 get_usdhc_clk(u32 port)
diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c
index a3902962b5..009a644abf 100644
--- a/arch/arm/cpu/armv7/mx6/soc.c
+++ b/arch/arm/cpu/armv7/mx6/soc.c
@@ -19,6 +19,14 @@
 #include <asm/arch/mxc_hdmi.h>
 #include <asm/arch/crm_regs.h>
 
+#define VDDPU_MASK	(0x1f << 9)
+
+enum ldo_reg {
+	LDO_ARM,
+	LDO_SOC,
+	LDO_PU,
+};
+
 struct scu_regs {
 	u32	ctrl;
 	u32	config;
@@ -93,6 +101,20 @@ void init_aips(void)
 	writel(0x00000000, &aips2->opacr4);
 }
 
+static void clear_ldo_ramp(void)
+{
+	struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR;
+	int reg;
+
+	/* ROM may modify LDO ramp up time according to fuse setting, so in
+	 * order to be in the safe side we neeed to reset these settings to
+	 * match the reset value: 0'b00
+	 */
+	reg = readl(&anatop->ana_misc2);
+	reg &= ~(0x3f << 24);
+	writel(reg, &anatop->ana_misc2);
+}
+
 /*
  * Set the VDDSOC
  *
@@ -101,10 +123,11 @@ void init_aips(void)
  * Possible values are from 0.725V to 1.450V in steps of
  * 0.025V (25mV).
  */
-void set_vddsoc(u32 mv)
+static int set_ldo_voltage(enum ldo_reg ldo, u32 mv)
 {
 	struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR;
-	u32 val, reg = readl(&anatop->reg_core);
+	u32 val, step, old, reg = readl(&anatop->reg_core);
+	u8 shift;
 
 	if (mv < 725)
 		val = 0x00;	/* Power gated off */
@@ -113,12 +136,37 @@ void set_vddsoc(u32 mv)
 	else
 		val = (mv - 700) / 25;
 
+	clear_ldo_ramp();
+
+	switch (ldo) {
+	case LDO_SOC:
+		shift = 18;
+		break;
+	case LDO_PU:
+		shift = 9;
+		break;
+	case LDO_ARM:
+		shift = 0;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	old = (reg & (0x1F << shift)) >> shift;
+	step = abs(val - old);
+	if (step == 0)
+		return 0;
+
+	reg = (reg & ~(0x1F << shift)) | (val << shift);
+	writel(reg, &anatop->reg_core);
+
 	/*
-	 * Mask out the REG_CORE[22:18] bits (REG2_TRIG)
-	 * and set them to the calculated value (0.7V + val * 0.25V)
+	 * The LDO ramp-up is based on 64 clock cycles of 24 MHz = 2.6 us per
+	 * step
 	 */
-	reg = (reg & ~(0x1F << 18)) | (val << 18);
-	writel(reg, &anatop->reg_core);
+	udelay(3 * step);
+
+	return 0;
 }
 
 static void imx_set_wdog_powerdown(bool enable)
@@ -131,13 +179,50 @@ static void imx_set_wdog_powerdown(bool enable)
 	writew(enable, &wdog2->wmcr);
 }
 
+static void imx_set_vddpu_power_down(void)
+{
+	struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR;
+	struct gpc_regs *gpc = (struct gpc_regs *)GPC_BASE_ADDR;
+
+	u32 reg;
+
+	/*
+	 * Disable the brown out detection since we are going to be
+	 * disabling the LDO.
+	 */
+	reg = readl(&anatop->ana_misc2);
+	reg &= ~ANADIG_ANA_MISC2_REG1_BO_EN;
+	writel(reg, &anatop->ana_misc2);
+
+	/* need to power down xPU in GPC before turning off PU LDO */
+	reg = readl(&gpc->gpu_ctrl);
+	writel(reg | 0x1, &gpc->gpu_ctrl);
+
+	reg = readl(&gpc->ctrl);
+	writel(reg | 0x1, &gpc->ctrl);
+	while (readl(&gpc->ctrl) & 0x1)
+		;
+
+	/* Mask the ANATOP brown out interrupt in the GPC. */
+	reg = readl(&gpc->imr4);
+	reg |= 0x80000000;
+	writel(reg, &gpc->imr4);
+
+	/* disable VDDPU */
+	writel(VDDPU_MASK, &anatop->reg_core_clr);
+
+	/* Clear the BO interrupt in the ANATOP. */
+	reg = readl(&anatop->ana_misc1);
+	reg |= 0x80000000;
+	writel(reg, &anatop->ana_misc1);
+}
+
 int arch_cpu_init(void)
 {
 	init_aips();
 
-	set_vddsoc(1200);	/* Set VDDSOC to 1.2V */
-
 	imx_set_wdog_powerdown(false); /* Disable PDE bit of WMCR register */
+	imx_set_vddpu_power_down();
 
 #ifdef CONFIG_APBH_DMA
 	/* Start APBH DMA */
@@ -147,9 +232,18 @@ int arch_cpu_init(void)
 	return 0;
 }
 
+int board_postclk_init(void)
+{
+	set_ldo_voltage(LDO_SOC, 1175);	/* Set VDDSOC to 1.175V */
+
+	return 0;
+}
+
 #ifndef CONFIG_SYS_DCACHE_OFF
 void enable_caches(void)
 {
+	/* Avoid random hang when download by usb */
+	invalidate_dcache_all();
 	/* Enable D-cache. I-cache is already enabled in start.S */
 	dcache_enable();
 }
diff --git a/arch/arm/cpu/armv7/omap-common/abb.c b/arch/arm/cpu/armv7/omap-common/abb.c
index a46783fae2..423aeb9807 100644
--- a/arch/arm/cpu/armv7/omap-common/abb.c
+++ b/arch/arm/cpu/armv7/omap-common/abb.c
@@ -11,6 +11,7 @@
 
 #include <common.h>
 #include <asm/omap_common.h>
+#include <asm/arch/clock.h>
 #include <asm/io.h>
 #include <asm/arch/sys_proto.h>
 
diff --git a/arch/arm/cpu/armv7/omap-common/emif-common.c b/arch/arm/cpu/armv7/omap-common/emif-common.c
index 5a3f2858cd..cd6289b4fc 100644
--- a/arch/arm/cpu/armv7/omap-common/emif-common.c
+++ b/arch/arm/cpu/armv7/omap-common/emif-common.c
@@ -50,20 +50,6 @@ inline u32 emif_num(u32 base)
 		return 0;
 }
 
-/*
- * Get SDRAM type connected to EMIF.
- * Assuming similar SDRAM parts are connected to both EMIF's
- * which is typically the case. So it is sufficient to get
- * SDRAM type from EMIF1.
- */
-u32 emif_sdram_type()
-{
-	struct emif_reg_struct *emif = (struct emif_reg_struct *)EMIF1_BASE;
-
-	return (readl(&emif->emif_sdram_config) &
-		EMIF_REG_SDRAM_TYPE_MASK) >> EMIF_REG_SDRAM_TYPE_SHIFT;
-}
-
 static inline u32 get_mr(u32 base, u32 cs, u32 mr_addr)
 {
 	u32 mr;
diff --git a/arch/arm/cpu/armv7/omap5/hw_data.c b/arch/arm/cpu/armv7/omap5/hw_data.c
index 82910e87a0..5268a1fca5 100644
--- a/arch/arm/cpu/armv7/omap5/hw_data.c
+++ b/arch/arm/cpu/armv7/omap5/hw_data.c
@@ -39,17 +39,6 @@ static const struct dpll_params mpu_dpll_params_1_5ghz[NUM_SYS_CLKS] = {
 	{625, 15, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}	/* 38.4 MHz */
 };
 
-/* OPP NOM FREQUENCY for ES2.0, OPP HIGH for ES1.0 */
-static const struct dpll_params mpu_dpll_params_1100mhz[NUM_SYS_CLKS] = {
-	{275, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 12 MHz   */
-	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
-	{1375, 20, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 16.8 MHz */
-	{1375, 23, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
-	{550, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 26 MHz   */
-	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
-	{1375, 47, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}	/* 38.4 MHz */
-};
-
 /* OPP NOM FREQUENCY for ES1.0 */
 static const struct dpll_params mpu_dpll_params_800mhz[NUM_SYS_CLKS] = {
 	{200, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 12 MHz   */
@@ -83,6 +72,7 @@ static const struct dpll_params mpu_dpll_params_499mhz[NUM_SYS_CLKS] = {
 	{493, 37, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}	/* 38.4 MHz */
 };
 
+/* OPP NOM FREQUENCY for OMAP5 ES2.0, and DRA7 ES1.0 */
 static const struct dpll_params mpu_dpll_params_1ghz[NUM_SYS_CLKS] = {
 	{250, 2, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1},		/* 12 MHz   */
 	{500, 9, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1},		/* 20 MHz   */
@@ -169,13 +159,13 @@ static const struct dpll_params per_dpll_params_768mhz_es2[NUM_SYS_CLKS] = {
 };
 
 static const struct dpll_params per_dpll_params_768mhz_dra7xx[NUM_SYS_CLKS] = {
-	{32, 0, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1},		/* 12 MHz   */
+	{32, 0, 4, 1, 3, 4, 4, 2, -1, -1, -1, -1},		/* 12 MHz   */
 	{96, 4, 4, 1, 3, 4, 4, 2, -1, -1, -1, -1},		/* 20 MHz   */
-	{160, 6, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1},		/* 16.8 MHz */
-	{20, 0, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1},		/* 19.2 MHz */
-	{192, 12, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1},		/* 26 MHz   */
+	{160, 6, 4, 1, 3, 4, 4, 2, -1, -1, -1, -1},		/* 16.8 MHz */
+	{20, 0, 4, 1, 3, 4, 4, 2, -1, -1, -1, -1},		/* 19.2 MHz */
+	{192, 12, 4, 1, 3, 4, 4, 2, -1, -1, -1, -1},		/* 26 MHz   */
 	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
-	{10, 0, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1},		/* 38.4 MHz */
+	{10, 0, 4, 1, 3, 4, 4, 2, -1, -1, -1, -1},		/* 38.4 MHz */
 };
 
 static const struct dpll_params iva_dpll_params_2330mhz[NUM_SYS_CLKS] = {
@@ -272,7 +262,7 @@ struct dplls omap5_dplls_es1 = {
 };
 
 struct dplls omap5_dplls_es2 = {
-	.mpu = mpu_dpll_params_1100mhz,
+	.mpu = mpu_dpll_params_1ghz,
 	.core = core_dpll_params_2128mhz_ddr532_es2,
 	.per = per_dpll_params_768mhz_es2,
 	.iva = iva_dpll_params_2330mhz,
diff --git a/arch/arm/cpu/armv7/zynq/slcr.c b/arch/arm/cpu/armv7/zynq/slcr.c
index 717ec65aee..b4c11c324c 100644
--- a/arch/arm/cpu/armv7/zynq/slcr.c
+++ b/arch/arm/cpu/armv7/zynq/slcr.c
@@ -101,6 +101,12 @@ void zynq_slcr_devcfg_enable(void)
 	zynq_slcr_lock();
 }
 
+u32 zynq_slcr_get_boot_mode(void)
+{
+	/* Get the bootmode register value */
+	return readl(&slcr_base->boot_mode);
+}
+
 u32 zynq_slcr_get_idcode(void)
 {
 	return (readl(&slcr_base->pss_idcode) & SLCR_IDCODE_MASK) >>