ARM:AM33XX: Add SPL support for AM335X EVM

This patch is added to support SPL feature on AM335X
platform. In this patch, MMC1 is configured as boot
device for SPL and support for other devices will be
added in the next patch series.

Signed-off-by: Chandan Nath <chandan.nath@ti.com>
Signed-off-by: Tom Rini <trini@ti.com>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>

8 files changed, 119 insertions, 107 deletions

diff --git a/arch/arm/cpu/armv7/am33xx/Makefile b/arch/arm/cpu/armv7/am33xx/Makefile
index 6beafbbece..7768912603 100644
--- a/arch/arm/cpu/armv7/am33xx/Makefile
+++ b/arch/arm/cpu/armv7/am33xx/Makefile
@@ -16,8 +16,6 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(SOC).o
 
-SOBJS	:= lowlevel_init.o
-
 COBJS	+= clock.o
 COBJS	+= sys_info.o
 COBJS	+= ddr.o
diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c
index 312643c777..d64ae6936c 100644
--- a/arch/arm/cpu/armv7/am33xx/board.c
+++ b/arch/arm/cpu/armv7/am33xx/board.c
@@ -19,19 +19,31 @@
 #include <common.h>
 #include <asm/arch/cpu.h>
 #include <asm/arch/hardware.h>
+#include <asm/arch/omap.h>
 #include <asm/arch/ddr_defs.h>
 #include <asm/arch/clock.h>
+#include <asm/arch/mmc_host_def.h>
+#include <asm/arch/common_def.h>
 #include <asm/io.h>
+#include <asm/omap_common.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
 struct wd_timer *wdtimer = (struct wd_timer *)WDT_BASE;
 struct gptimer *timer_base = (struct gptimer *)CONFIG_SYS_TIMERBASE;
+struct uart_sys *uart_base = (struct uart_sys *)DEFAULT_UART_BASE;
+
+/* UART Defines */
+#ifdef CONFIG_SPL_BUILD
+#define UART_RESET		(0x1 << 1)
+#define UART_CLK_RUNNING_MASK	0x1
+#define UART_SMART_IDLE_EN	(0x1 << 0x3)
+#endif
 
 /*
  * early system init of muxing and clocks.
  */
-void s_init(u32 in_ddr)
+void s_init(void)
 {
 	/* WDT1 is already running when the bootloader gets control
 	 * Disable it to avoid "random" resets
@@ -43,12 +55,37 @@ void s_init(u32 in_ddr)
 	while (readl(&wdtimer->wdtwwps) != 0x0)
 		;
 
+#ifdef CONFIG_SPL_BUILD
 	/* Setup the PLLs and the clocks for the peripherals */
-#ifdef CONFIG_SETUP_PLL
 	pll_init();
+
+	/* UART softreset */
+	u32 regVal;
+
+	enable_uart0_pin_mux();
+
+	regVal = readl(&uart_base->uartsyscfg);
+	regVal |= UART_RESET;
+	writel(regVal, &uart_base->uartsyscfg);
+	while ((readl(&uart_base->uartsyssts) &
+		UART_CLK_RUNNING_MASK) != UART_CLK_RUNNING_MASK)
+		;
+
+	/* Disable smart idle */
+	regVal = readl(&uart_base->uartsyscfg);
+	regVal |= UART_SMART_IDLE_EN;
+	writel(regVal, &uart_base->uartsyscfg);
+
+	/* Initialize the Timer */
+	init_timer();
+
+	preloader_console_init();
+
+	config_ddr();
 #endif
-	if (!in_ddr)
-		config_ddr();
+
+	/* Enable MMC0 */
+	enable_mmc0_pin_mux();
 }
 
 /* Initialize timer */
@@ -71,3 +108,9 @@ int board_mmc_init(bd_t *bis)
 	return omap_mmc_init(0);
 }
 #endif
+
+void setup_clocks_for_console(void)
+{
+	/* Not yet implemented */
+	return;
+}
diff --git a/arch/arm/cpu/armv7/am33xx/config.mk b/arch/arm/cpu/armv7/am33xx/config.mk
new file mode 100644
index 0000000000..5750bbdcb6
--- /dev/null
+++ b/arch/arm/cpu/armv7/am33xx/config.mk
@@ -0,0 +1,18 @@
+#
+# Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed "as is" WITHOUT ANY WARRANTY of any
+# kind, whether express or implied; without even the implied warranty
+# of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+ifdef CONFIG_SPL_BUILD
+ALL-y	+= $(OBJTREE)/MLO
+else
+ALL-y	+= $(obj)u-boot.img
+endif
diff --git a/arch/arm/cpu/armv7/am33xx/emif4.c b/arch/arm/cpu/armv7/am33xx/emif4.c
index 1318365a4a..2f4164df82 100644
--- a/arch/arm/cpu/armv7/am33xx/emif4.c
+++ b/arch/arm/cpu/armv7/am33xx/emif4.c
@@ -46,7 +46,7 @@ void dram_init_banksize(void)
 }
 
 
-#ifdef CONFIG_AM335X_CONFIG_DDR
+#ifdef CONFIG_SPL_BUILD
 static void data_macro_config(int dataMacroNum)
 {
 	struct ddr_data data;
diff --git a/arch/arm/cpu/armv7/am33xx/lowlevel_init.S b/arch/arm/cpu/armv7/am33xx/lowlevel_init.S
deleted file mode 100644
index 17c962ff71..0000000000
--- a/arch/arm/cpu/armv7/am33xx/lowlevel_init.S
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * lowlevel_init.S
- *
- * AM33XX low level initialization.
- *
- * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
- *
- * Initial Code by:
- * Mansoor Ahamed  <mansoor.ahamed@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <config.h>
-#include <asm/arch/hardware.h>
-
-_mark1:
-	.word mark1
-_lowlevel_init1:
-	.word lowlevel_init
-_s_init_start:
-	.word s_init_start
-
-_TEXT_BASE:
-	.word	CONFIG_SYS_TEXT_BASE	/* sdram load addr from config.mk */
-
-/*****************************************************************************
- * lowlevel_init: - Platform low level init.
- ****************************************************************************/
-.globl lowlevel_init
-lowlevel_init:
-
-	/* The link register is saved in ip by start.S */
-	mov r6, ip
-	/* check if we are already running from RAM */
-	ldr r2, _lowlevel_init1
-	ldr r3, _TEXT_BASE
-	sub r4, r2, r3
-	sub r0, pc, r4
-	ldr sp, SRAM_STACK
-mark1:
-	ldr r5, _mark1
-	sub r5, r5, r2 /* bytes between mark1 and lowlevel_init */
-	sub r0, r0, r5 /* r0 <- _start w.r.t current place of execution */
-	mov r10, #0x0 /* r10 has in_ddr used by s_init() */
-
-	ands r0, r0, #0xC0000000
-	/* MSB 2 bits <> 0 then we are in ocmc or DDR */
-	cmp r0, #0x80000000
-	bne s_init_start
-	mov r10, #0x01
-	b s_init_start
-
-s_init_start:
-	mov r0, r10 /* passing in_ddr in r0 */
-	bl s_init
-	/* back to arch calling code */
-	mov pc, r6
-	/* the literal pools origin */
-	.ltorg
-
-SRAM_STACK:
-	/* Place stack at the top */
-	.word LOW_LEVEL_SRAM_STACK
diff --git a/arch/arm/cpu/armv7/omap-common/Makefile b/arch/arm/cpu/armv7/omap-common/Makefile
index a684611265..3f7a0b25f0 100644
--- a/arch/arm/cpu/armv7/omap-common/Makefile
+++ b/arch/arm/cpu/armv7/omap-common/Makefile
@@ -37,6 +37,10 @@ ifneq ($(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX),)
 COBJS	+= hwinit-common.o
 COBJS	+= clocks-common.o
 COBJS	+= emif-common.o
+endif
+
+ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX),)
+COBJS	+= boot-common.o
 SOBJS	+= lowlevel_init.o
 endif
 
diff --git a/arch/arm/cpu/armv7/omap-common/boot-common.c b/arch/arm/cpu/armv7/omap-common/boot-common.c
new file mode 100644
index 0000000000..f211f7670c
--- /dev/null
+++ b/arch/arm/cpu/armv7/omap-common/boot-common.c
@@ -0,0 +1,49 @@
+/*
+ * boot-common.c
+ *
+ * Common bootmode functions for omap based boards
+ *
+ * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <common.h>
+#include <asm/omap_common.h>
+#include <asm/arch/omap.h>
+
+/*
+ * This is used to verify if the configuration header
+ * was executed by rom code prior to control of transfer
+ * to the bootloader. SPL is responsible for saving and
+ * passing the boot_params pointer to the u-boot.
+ */
+struct omap_boot_parameters boot_params __attribute__ ((section(".data")));
+
+#ifdef CONFIG_SPL_BUILD
+/*
+ * We use static variables because global data is not ready yet.
+ * Initialized data is available in SPL right from the beginning.
+ * We would not typically need to save these parameters in regular
+ * U-Boot. This is needed only in SPL at the moment.
+ */
+u32 omap_bootmode = MMCSD_MODE_FAT;
+
+u32 omap_boot_device(void)
+{
+	return (u32) (boot_params.omap_bootdevice);
+}
+
+u32 omap_boot_mode(void)
+{
+	return omap_bootmode;
+}
+#endif
diff --git a/arch/arm/cpu/armv7/omap-common/hwinit-common.c b/arch/arm/cpu/armv7/omap-common/hwinit-common.c
index f65705db12..da22f73162 100644
--- a/arch/arm/cpu/armv7/omap-common/hwinit-common.c
+++ b/arch/arm/cpu/armv7/omap-common/hwinit-common.c
@@ -35,34 +35,6 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-/*
- * This is used to verify if the configuration header
- * was executed by rom code prior to control of transfer
- * to the bootloader. SPL is responsible for saving and
- * passing the boot_params pointer to the u-boot.
- */
-struct omap_boot_parameters boot_params __attribute__ ((section(".data")));
-
-#ifdef CONFIG_SPL_BUILD
-/*
- * We use static variables because global data is not ready yet.
- * Initialized data is available in SPL right from the beginning.
- * We would not typically need to save these parameters in regular
- * U-Boot. This is needed only in SPL at the moment.
- */
-u32 omap_bootmode = MMCSD_MODE_FAT;
-
-u32 omap_boot_device(void)
-{
-	return (u32) (boot_params.omap_bootdevice);
-}
-
-u32 omap_boot_mode(void)
-{
-	return omap_bootmode;
-}
-#endif
-
 void do_set_mux(u32 base, struct pad_conf_entry const *array, int size)
 {
 	int i;