armv8/ls2085aqds: NAND boot support

This adds NAND boot support for LS2085AQDS, using SPL framework.
Details of forming NAND image can be found in README.

Signed-off-by: Scott Wood <scottwood@freescale.com>
[York Sun: Remove +S from defconfig after commit 252ed872]
Signed-off-by: York Sun <yorksun@freescale.com>

2 files changed, 86 insertions, 0 deletions

diff --git a/arch/arm/cpu/armv8/fsl-lsch3/README b/arch/arm/cpu/armv8/fsl-lsch3/README
index 4f36e2a605..15a1549e56 100644
--- a/arch/arm/cpu/armv8/fsl-lsch3/README
+++ b/arch/arm/cpu/armv8/fsl-lsch3/README
@@ -95,3 +95,41 @@ mcboottimeout:	MC boot timeout in milliseconds. If this variable is not defined
 
 mcmemsize:	MC DRAM block size. If this variable is not defined, the value
 		CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE will be assumed.
+
+Booting from NAND
+-------------------
+Booting from NAND requires two images, RCW and u-boot-with-spl.bin.
+The difference between NAND boot RCW image and NOR boot image is the PBI
+command sequence. Below is one example for PBI commands for QDS which uses
+NAND device with 2KB/page, block size 128KB.
+
+1) CCSR 4-byte write to 0x00e00404, data=0x00000000
+2) CCSR 4-byte write to 0x00e00400, data=0x1800a000
+The above two commands set bootloc register to 0x00000000_1800a000 where
+the u-boot code will be running in OCRAM.
+
+3) Block Copy: SRC=0x0107, SRC_ADDR=0x00020000, DEST_ADDR=0x1800a000,
+BLOCK_SIZE=0x00014000
+This command copies u-boot image from NAND device into OCRAM. The values need
+to adjust accordingly.
+
+SRC		should match the cfg_rcw_src, the reset config pins. It depends
+		on the NAND device. See reference manual for cfg_rcw_src.
+SRC_ADDR	is the offset of u-boot-with-spl.bin image in NAND device. In
+		the example above, 128KB. For easy maintenance, we put it at
+		the beginning of next block from RCW.
+DEST_ADDR	is fixed at 0x1800a000, matching bootloc set above.
+BLOCK_SIZE	is the size to be copied by PBI.
+
+RCW image should be written to the beginning of NAND device. Example of using
+u-boot command
+
+nand write <rcw image in memory> 0 <size of rcw image>
+
+To form the NAND image, build u-boot with NAND config, for example,
+ls2085aqds_nand_defconfig. The image needed is u-boot-with-spl.bin.
+The u-boot image should be written to match SRC_ADDR, in above example 0x20000.
+
+nand write <u-boot image in memory> 200000 <size of u-boot image>
+
+With these two images in NAND device, the board can boot from NAND.
diff --git a/arch/arm/cpu/armv8/fsl-lsch3/soc.c b/arch/arm/cpu/armv8/fsl-lsch3/soc.c
index 17700ef94e..ca00108e40 100644
--- a/arch/arm/cpu/armv8/fsl-lsch3/soc.c
+++ b/arch/arm/cpu/armv8/fsl-lsch3/soc.c
@@ -6,8 +6,13 @@
 
 #include <common.h>
 #include <fsl_ifc.h>
+#include <nand.h>
+#include <spl.h>
 #include <asm/arch-fsl-lsch3/soc.h>
 #include <asm/io.h>
+#include <asm/global_data.h>
+
+DECLARE_GLOBAL_DATA_PTR;
 
 static void erratum_a008751(void)
 {
@@ -18,8 +23,51 @@ static void erratum_a008751(void)
 #endif
 }
 
+static void erratum_rcw_src(void)
+{
+#if defined(CONFIG_SPL)
+	u32 __iomem *dcfg_ccsr = (u32 __iomem *)DCFG_BASE;
+	u32 __iomem *dcfg_dcsr = (u32 __iomem *)DCFG_DCSR_BASE;
+	u32 val;
+
+	val = in_le32(dcfg_ccsr + DCFG_PORSR1 / 4);
+	val &= ~DCFG_PORSR1_RCW_SRC;
+	val |= DCFG_PORSR1_RCW_SRC_NOR;
+	out_le32(dcfg_dcsr + DCFG_DCSR_PORCR1 / 4, val);
+#endif
+}
+
 void fsl_lsch3_early_init_f(void)
 {
 	erratum_a008751();
+	erratum_rcw_src();
 	init_early_memctl_regs();	/* tighten IFC timing */
 }
+
+#ifdef CONFIG_SPL_BUILD
+void board_init_f(ulong dummy)
+{
+	/* Clear global data */
+	memset((void *)gd, 0, sizeof(gd_t));
+
+	arch_cpu_init();
+	board_early_init_f();
+	timer_init();
+	env_init();
+	gd->baudrate = getenv_ulong("baudrate", 10, CONFIG_BAUDRATE);
+
+	serial_init();
+	console_init_f();
+	dram_init();
+
+	/* Clear the BSS. */
+	memset(__bss_start, 0, __bss_end - __bss_start);
+
+	board_init_r(NULL, 0);
+}
+
+u32 spl_boot_device(void)
+{
+	return BOOT_DEVICE_NAND;
+}
+#endif