ARM: DRA7: Add ABB setup for all domains

ABB should be initialized for all required domains voltage domain
for DRA7: IVA, GPU, EVE in addition to the existing MPU domain. If
we do not do this, kernel configuring just the frequency using the
default boot loader configured voltage can fail on many corner lot
units and has been hard to debug. This specifically is a concern with
DRA7 generation of SoCs since other than VDD_MPU, all other domains
are only permitted to setup the voltages to required OPP only at boot.

Reported-by: Richard Woodruff <r-woodruff2@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>

3 files changed, 40 insertions, 0 deletions

diff --git a/arch/arm/cpu/armv7/omap-common/clocks-common.c b/arch/arm/cpu/armv7/omap-common/clocks-common.c
index da57b385c9..ef2ac98217 100644
--- a/arch/arm/cpu/armv7/omap-common/clocks-common.c
+++ b/arch/arm/cpu/armv7/omap-common/clocks-common.c
@@ -596,10 +596,34 @@ void scale_vcores(struct vcores_data const *vcores)
 
 	debug("gpu: %d\n", vcores->gpu.value);
 	do_scale_vcore(vcores->gpu.addr, vcores->gpu.value, vcores->gpu.pmic);
+	/* Configure GPU ABB LDO after scale */
+	abb_setup(vcores->gpu.efuse.reg,
+		  (*ctrl)->control_wkup_ldovbb_gpu_voltage_ctrl,
+		  (*prcm)->prm_abbldo_gpu_setup,
+		  (*prcm)->prm_abbldo_gpu_ctrl,
+		  (*prcm)->prm_irqstatus_mpu,
+		  vcores->gpu.abb_tx_done_mask,
+		  OMAP_ABB_FAST_OPP);
 	debug("eve: %d\n", vcores->eve.value);
 	do_scale_vcore(vcores->eve.addr, vcores->eve.value, vcores->eve.pmic);
+	/* Configure EVE ABB LDO after scale */
+	abb_setup(vcores->eve.efuse.reg,
+		  (*ctrl)->control_wkup_ldovbb_eve_voltage_ctrl,
+		  (*prcm)->prm_abbldo_eve_setup,
+		  (*prcm)->prm_abbldo_eve_ctrl,
+		  (*prcm)->prm_irqstatus_mpu,
+		  vcores->eve.abb_tx_done_mask,
+		  OMAP_ABB_FAST_OPP);
 	debug("iva: %d\n", vcores->iva.value);
 	do_scale_vcore(vcores->iva.addr, vcores->iva.value, vcores->iva.pmic);
+	/* Configure IVA ABB LDO after scale */
+	abb_setup(vcores->iva.efuse.reg,
+		  (*ctrl)->control_wkup_ldovbb_iva_voltage_ctrl,
+		  (*prcm)->prm_abbldo_iva_setup,
+		  (*prcm)->prm_abbldo_iva_ctrl,
+		  (*prcm)->prm_irqstatus_mpu,
+		  vcores->iva.abb_tx_done_mask,
+		  OMAP_ABB_FAST_OPP);
 	/* Might need udelay(1000) here if debug is enabled to see all prints */
 #else
 	u32 val;
diff --git a/arch/arm/cpu/armv7/omap5/hw_data.c b/arch/arm/cpu/armv7/omap5/hw_data.c
index dfb1df6bce..88e8920bad 100644
--- a/arch/arm/cpu/armv7/omap5/hw_data.c
+++ b/arch/arm/cpu/armv7/omap5/hw_data.c
@@ -377,12 +377,14 @@ struct vcores_data dra752_volts = {
 	.eve.efuse.reg_bits	= DRA752_EFUSE_REGBITS,
 	.eve.addr	= TPS659038_REG_ADDR_SMPS45,
 	.eve.pmic	= &tps659038,
+	.eve.abb_tx_done_mask = OMAP_ABB_EVE_TXDONE_MASK,
 
 	.gpu.value	= VDD_GPU_DRA752,
 	.gpu.efuse.reg	= STD_FUSE_OPP_VMIN_GPU_NOM,
 	.gpu.efuse.reg_bits	= DRA752_EFUSE_REGBITS,
 	.gpu.addr	= TPS659038_REG_ADDR_SMPS6,
 	.gpu.pmic	= &tps659038,
+	.gpu.abb_tx_done_mask = OMAP_ABB_GPU_TXDONE_MASK,
 
 	.core.value	= VDD_CORE_DRA752,
 	.core.efuse.reg	= STD_FUSE_OPP_VMIN_CORE_NOM,
@@ -395,6 +397,7 @@ struct vcores_data dra752_volts = {
 	.iva.efuse.reg_bits	= DRA752_EFUSE_REGBITS,
 	.iva.addr	= TPS659038_REG_ADDR_SMPS8,
 	.iva.pmic	= &tps659038,
+	.iva.abb_tx_done_mask = OMAP_ABB_IVA_TXDONE_MASK,
 };
 
 struct vcores_data dra722_volts = {
@@ -420,18 +423,21 @@ struct vcores_data dra722_volts = {
 	.gpu.efuse.reg_bits = DRA752_EFUSE_REGBITS,
 	.gpu.addr	= TPS65917_REG_ADDR_SMPS3,
 	.gpu.pmic	= &tps659038,
+	.gpu.abb_tx_done_mask = OMAP_ABB_GPU_TXDONE_MASK,
 
 	.eve.value	= VDD_EVE_DRA72x,
 	.eve.efuse.reg	= STD_FUSE_OPP_VMIN_DSPEVE_NOM,
 	.eve.efuse.reg_bits = DRA752_EFUSE_REGBITS,
 	.eve.addr	= TPS65917_REG_ADDR_SMPS3,
 	.eve.pmic	= &tps659038,
+	.eve.abb_tx_done_mask = OMAP_ABB_EVE_TXDONE_MASK,
 
 	.iva.value	= VDD_IVA_DRA72x,
 	.iva.efuse.reg	= STD_FUSE_OPP_VMIN_IVA_NOM,
 	.iva.efuse.reg_bits = DRA752_EFUSE_REGBITS,
 	.iva.addr	= TPS65917_REG_ADDR_SMPS3,
 	.iva.pmic	= &tps659038,
+	.iva.abb_tx_done_mask = OMAP_ABB_IVA_TXDONE_MASK,
 };
 
 /*
diff --git a/arch/arm/cpu/armv7/omap5/prcm-regs.c b/arch/arm/cpu/armv7/omap5/prcm-regs.c
index d126a32231..655e92ba27 100644
--- a/arch/arm/cpu/armv7/omap5/prcm-regs.c
+++ b/arch/arm/cpu/armv7/omap5/prcm-regs.c
@@ -446,6 +446,9 @@ struct omap_sys_ctrl_regs const dra7xx_ctrl = {
 	.control_emif1_sdram_config_ext		= 0x4AE0C144,
 	.control_emif2_sdram_config_ext		= 0x4AE0C148,
 	.control_wkup_ldovbb_mpu_voltage_ctrl	= 0x4AE0C158,
+	.control_wkup_ldovbb_iva_voltage_ctrl	= 0x4A002470,
+	.control_wkup_ldovbb_eve_voltage_ctrl	= 0x4A00246C,
+	.control_wkup_ldovbb_gpu_voltage_ctrl	= 0x4AE0C154,
 	.control_std_fuse_die_id_0		= 0x4AE0C200,
 	.control_std_fuse_die_id_1		= 0x4AE0C208,
 	.control_std_fuse_die_id_2		= 0x4AE0C20C,
@@ -831,6 +834,7 @@ struct prcm_regs const dra7xx_prcm = {
 	.cm_ipu_i2c5_clkctrl			= 0x4a005578,
 
 	/* prm irqstatus regs */
+	.prm_irqstatus_mpu			= 0x4ae06010,
 	.prm_irqstatus_mpu_2			= 0x4ae06014,
 
 	/* cm2.ckgen */
@@ -999,6 +1003,12 @@ struct prcm_regs const dra7xx_prcm = {
 
 	.prm_abbldo_mpu_setup			= 0x4AE07DDC,
 	.prm_abbldo_mpu_ctrl			= 0x4AE07DE0,
+	.prm_abbldo_iva_setup			= 0x4AE07E34,
+	.prm_abbldo_iva_ctrl			= 0x4AE07E24,
+	.prm_abbldo_eve_setup			= 0x4AE07E30,
+	.prm_abbldo_eve_ctrl			= 0x4AE07E20,
+	.prm_abbldo_gpu_setup			= 0x4AE07DE4,
+	.prm_abbldo_gpu_ctrl			= 0x4AE07DE8,
 
 	/*l3main1 edma*/
 	.cm_l3main1_tptc1_clkctrl               = 0x4a008778,