arm64: mvebu: Modify the A8K SPI and I2C config in DTS

Align the Armada-8040-db and Armada-7040-db SPI and I2C
DTS settings with latest DB settings:
- 8040-db: disable i2c0 and spi0 on AP (MPPs are reserved for SDIO)
- 8040-db: disable cps_i2c0 on CP1
- 8040-db: enable spi1 on CP1 (the new location of the boot flash)
  The spi1 on CP1 is aliased as spi0 since this is the way
  the driver enumerates it.

Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Cc: Stefan Roese <sr@denx.de>
Cc: Nadav Haklai <nadavh@marvell.com>
Cc: Neta Zur Hershkovits <neta@marvell.com>
Cc: Omri Itach <omrii@marvell.com>
Cc: Igal Liberman <igall@marvell.com>
Cc: Haim Boot <hayim@marvell.com>
Cc: Hanna Hawa <hannah@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>

1 files changed, 0 insertions, 32 deletions

diff --git a/arch/arm/dts/armada-7040-db.dts b/arch/arm/dts/armada-7040-db.dts
index b8fe5a9cb9..1e4d676f67 100644
--- a/arch/arm/dts/armada-7040-db.dts
+++ b/arch/arm/dts/armada-7040-db.dts
@@ -66,38 +66,6 @@
 	};
 };
 
-&i2c0 {
-	status = "okay";
-	clock-frequency = <100000>;
-};
-
-&spi0 {
-	status = "okay";
-
-	spi-flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <10000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "U-Boot";
-				reg = <0 0x200000>;
-			};
-			partition@400000 {
-				label = "Filesystem";
-				reg = <0x200000 0xce0000>;
-			};
-		};
-	};
-};
-
 &uart0 {
 	status = "okay";
 };