summaryrefslogtreecommitdiff
path: root/arch/arm/dts/k3-am654-base-board.dts
diff options
context:
space:
mode:
authorVignesh Raghavendra <vigneshr@ti.com>2020-02-04 11:09:51 +0530
committerLokesh Vutla <lokeshvutla@ti.com>2020-03-03 13:08:13 +0530
commit9e9dfc1fc4481e9e53bad164b8267f814724b1f2 (patch)
tree895fe7572da88e53258005b7882c9d21e11bdce1 /arch/arm/dts/k3-am654-base-board.dts
parent7d0866b9be660e0f885bd18c04414bb0cbffb3b7 (diff)
ARM: dts: k3-am65: Add OSPI DT nodes
Add OSPI DT nodes to enable OSPI at U-Boot prompt and also to support OSPI boot. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Diffstat (limited to 'arch/arm/dts/k3-am654-base-board.dts')
-rw-r--r--arch/arm/dts/k3-am654-base-board.dts36
1 files changed, 36 insertions, 0 deletions
diff --git a/arch/arm/dts/k3-am654-base-board.dts b/arch/arm/dts/k3-am654-base-board.dts
index 7ebbf17862..375f1d089c 100644
--- a/arch/arm/dts/k3-am654-base-board.dts
+++ b/arch/arm/dts/k3-am654-base-board.dts
@@ -73,6 +73,22 @@
AM65X_WKUP_IOPAD(0x00e4, PIN_INPUT, 0) /* (AD6) WKUP_I2C0_SDA */
>;
};
+
+ mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-pins_default {
+ pinctrl-single,pins = <
+ AM65X_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* (V1) MCU_OSPI0_CLK */
+ AM65X_WKUP_IOPAD(0x0008, PIN_INPUT, 0) /* (U2) MCU_OSPI0_DQS */
+ AM65X_WKUP_IOPAD(0x000c, PIN_INPUT, 0) /* (U4) MCU_OSPI0_D0 */
+ AM65X_WKUP_IOPAD(0x0010, PIN_INPUT, 0) /* (U5) MCU_OSPI0_D1 */
+ AM65X_WKUP_IOPAD(0x0014, PIN_INPUT, 0) /* (T2) MCU_OSPI0_D2 */
+ AM65X_WKUP_IOPAD(0x0018, PIN_INPUT, 0) /* (T3) MCU_OSPI0_D3 */
+ AM65X_WKUP_IOPAD(0x001c, PIN_INPUT, 0) /* (T4) MCU_OSPI0_D4 */
+ AM65X_WKUP_IOPAD(0x0020, PIN_INPUT, 0) /* (T5) MCU_OSPI0_D5 */
+ AM65X_WKUP_IOPAD(0x0024, PIN_INPUT, 0) /* (R2) MCU_OSPI0_D6 */
+ AM65X_WKUP_IOPAD(0x0028, PIN_INPUT, 0) /* (R3) MCU_OSPI0_D7 */
+ AM65X_WKUP_IOPAD(0x002c, PIN_OUTPUT, 0) /* (R4) MCU_OSPI0_CSn0 */
+ >;
+ };
};
&sdhci0 {
@@ -117,3 +133,23 @@
&usb0_phy {
status = "disabled";
};
+
+&ospi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
+
+ flash@0{
+ compatible = "jedec,spi-nor";
+ reg = <0x0>;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <8>;
+ spi-max-frequency = <40000000>;
+ cdns,tshsl-ns = <60>;
+ cdns,tsd2d-ns = <60>;
+ cdns,tchsh-ns = <60>;
+ cdns,tslch-ns = <60>;
+ cdns,read-delay = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+};