arm64: dts: meson: sync dt and bindings from v5.6-rc2

Sync the device tree and dt-bindings from Linux v5.6-rc2
11a48a5a18c6 ("Linux 5.6-rc2")

The only exception to this is the mmc pinctrl pin bias of gxl SoC family.
This is a fix which found its way to u-boot but not Linux yet.

Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>

1 files changed, 67 insertions, 20 deletions

diff --git a/arch/arm/dts/meson-gx.dtsi b/arch/arm/dts/meson-gx.dtsi
index f1e5cdbade..40db06e28b 100644
--- a/arch/arm/dts/meson-gx.dtsi
+++ b/arch/arm/dts/meson-gx.dtsi
@@ -50,13 +50,35 @@
 		};
 	};
 
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		simplefb_cvbs: framebuffer-cvbs {
+			compatible = "amlogic,simple-framebuffer",
+				     "simple-framebuffer";
+			amlogic,pipeline = "vpu-cvbs";
+			power-domains = <&pwrc_vpu>;
+			status = "disabled";
+		};
+
+		simplefb_hdmi: framebuffer-hdmi {
+			compatible = "amlogic,simple-framebuffer",
+				     "simple-framebuffer";
+			amlogic,pipeline = "vpu-hdmi";
+			power-domains = <&pwrc_vpu>;
+			status = "disabled";
+		};
+	};
+
 	cpus {
 		#address-cells = <0x2>;
 		#size-cells = <0x0>;
 
 		cpu0: cpu@0 {
 			device_type = "cpu";
-			compatible = "arm,cortex-a53", "arm,armv8";
+			compatible = "arm,cortex-a53";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
 			next-level-cache = <&l2>;
@@ -65,7 +87,7 @@
 
 		cpu1: cpu@1 {
 			device_type = "cpu";
-			compatible = "arm,cortex-a53", "arm,armv8";
+			compatible = "arm,cortex-a53";
 			reg = <0x0 0x1>;
 			enable-method = "psci";
 			next-level-cache = <&l2>;
@@ -74,7 +96,7 @@
 
 		cpu2: cpu@2 {
 			device_type = "cpu";
-			compatible = "arm,cortex-a53", "arm,armv8";
+			compatible = "arm,cortex-a53";
 			reg = <0x0 0x2>;
 			enable-method = "psci";
 			next-level-cache = <&l2>;
@@ -83,7 +105,7 @@
 
 		cpu3: cpu@3 {
 			device_type = "cpu";
-			compatible = "arm,cortex-a53", "arm,armv8";
+			compatible = "arm,cortex-a53";
 			reg = <0x0 0x3>;
 			enable-method = "psci";
 			next-level-cache = <&l2>;
@@ -139,6 +161,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		read-only;
+		secure-monitor = <&sm>;
 
 		sn: sn@14 {
 			reg = <0x14 0x10>;
@@ -198,7 +221,7 @@
 			};
 
 			reset: reset-controller@4404 {
-				compatible = "amlogic,meson-gx-reset", "amlogic,meson-gxbb-reset";
+				compatible = "amlogic,meson-gxbb-reset";
 				reg = <0x0 0x04404 0x0 0x9c>;
 				#reset-cells = <1>;
 			};
@@ -218,7 +241,7 @@
 			};
 
 			i2c_A: i2c@8500 {
-				compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c";
+				compatible = "amlogic,meson-gxbb-i2c";
 				reg = <0x0 0x08500 0x0 0x20>;
 				interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
 				#address-cells = <1>;
@@ -262,8 +285,13 @@
 				status = "disabled";
 			};
 
+			clock-measure@8758 {
+				compatible = "amlogic,meson-gx-clk-measure";
+				reg = <0x0 0x8758 0x0 0x10>;
+			};
+
 			i2c_B: i2c@87c0 {
-				compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c";
+				compatible = "amlogic,meson-gxbb-i2c";
 				reg = <0x0 0x087c0 0x0 0x20>;
 				interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>;
 				#address-cells = <1>;
@@ -272,7 +300,7 @@
 			};
 
 			i2c_C: i2c@87e0 {
-				compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c";
+				compatible = "amlogic,meson-gxbb-i2c";
 				reg = <0x0 0x087e0 0x0 0x20>;
 				interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>;
 				#address-cells = <1>;
@@ -290,7 +318,7 @@
 			};
 
 			spifc: spi@8c80 {
-				compatible = "amlogic,meson-gx-spifc", "amlogic,meson-gxbb-spifc";
+				compatible = "amlogic,meson-gxbb-spifc";
 				reg = <0x0 0x08c80 0x0 0x80>;
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -298,7 +326,7 @@
 			};
 
 			watchdog@98d0 {
-				compatible = "amlogic,meson-gx-wdt", "amlogic,meson-gxbb-wdt";
+				compatible = "amlogic,meson-gxbb-wdt";
 				reg = <0x0 0x098d0 0x0 0x10>;
 				clocks = <&xtal>;
 			};
@@ -364,6 +392,7 @@
 				compatible = "amlogic,meson-gx-ao-cec";
 				reg = <0x0 0x00100 0x0 0x14>;
 				interrupts = <GIC_SPI 199 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
 			};
 
 			sec_AO: ao-secure@140 {
@@ -387,7 +416,7 @@
 			};
 
 			i2c_AO: i2c@500 {
-				compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c";
+				compatible = "amlogic,meson-gxbb-i2c";
 				reg = <0x0 0x500 0x0 0x20>;
 				interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>;
 				#address-cells = <1>;
@@ -410,7 +439,21 @@
 			};
 		};
 
-		periphs: periphs@c8834000 {
+		vdec: video-codec@c8820000 {
+			compatible = "amlogic,gx-vdec";
+			reg = <0x0 0xc8820000 0x0 0x10000>,
+			      <0x0 0xc110a580 0x0 0xe4>;
+			reg-names = "dos", "esparser";
+
+			interrupts = <GIC_SPI 44 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "vdec", "esparser";
+
+			amlogic,ao-sysctrl = <&sysctrl_AO>;
+			amlogic,canvas = <&canvas>;
+		};
+
+		periphs: bus@c8834000 {
 			compatible = "simple-bus";
 			reg = <0x0 0xc8834000 0x0 0x2000>;
 			#address-cells = <2>;
@@ -449,7 +492,7 @@
 			};
 
 			mailbox: mailbox@404 {
-				compatible = "amlogic,meson-gx-mhu", "amlogic,meson-gxbb-mhu";
+				compatible = "amlogic,meson-gxbb-mhu";
 				reg = <0 0x404 0 0x4c>;
 				interrupts = <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>,
 					     <GIC_SPI 209 IRQ_TYPE_EDGE_RISING>,
@@ -459,11 +502,15 @@
 		};
 
 		ethmac: ethernet@c9410000 {
-			compatible = "amlogic,meson-gx-dwmac", "amlogic,meson-gxbb-dwmac", "snps,dwmac";
-			reg = <0x0 0xc9410000 0x0 0x10000
-			       0x0 0xc8834540 0x0 0x4>;
-			interrupts = <GIC_SPI 8 IRQ_TYPE_EDGE_RISING>;
+			compatible = "amlogic,meson-gxbb-dwmac",
+				     "snps,dwmac-3.70a",
+				     "snps,dwmac";
+			reg = <0x0 0xc9410000 0x0 0x10000>,
+			      <0x0 0xc8834540 0x0 0x4>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "macirq";
+			rx-fifo-depth = <4096>;
+			tx-fifo-depth = <2048>;
 			status = "disabled";
 		};
 
@@ -499,12 +546,12 @@
 		vpu: vpu@d0100000 {
 			compatible = "amlogic,meson-gx-vpu";
 			reg = <0x0 0xd0100000 0x0 0x100000>,
-			      <0x0 0xc883c000 0x0 0x1000>,
-			      <0x0 0xc8838000 0x0 0x1000>;
-			reg-names = "vpu", "hhi", "dmc";
+			      <0x0 0xc883c000 0x0 0x1000>;
+			reg-names = "vpu", "hhi";
 			interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			amlogic,canvas = <&canvas>;
 
 			/* CVBS VDAC output port */
 			cvbs_vdac_port: port@0 {