rockchip: rk322x: add dts file

The dts files are from kernel and with modify to adapt U-Boot.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>

1 files changed, 77 insertions, 0 deletions

diff --git a/arch/arm/dts/rk3229-evb.dts b/arch/arm/dts/rk3229-evb.dts
new file mode 100644
index 0000000000..ccdac1c79a
--- /dev/null
+++ b/arch/arm/dts/rk3229-evb.dts
@@ -0,0 +1,77 @@
+/*
+ * (C) Copyright 2017 Rockchip Electronics Co., Ltd.
+ *
+ * SPDX-License-Identifier:     GPL-2.0+ X11
+ */
+
+/dts-v1/;
+
+#include "rk322x.dtsi"
+
+/ {
+	model = "Rockchip RK3229 Evaluation board";
+	compatible = "rockchip,rk3229-evb", "rockchip,rk3229";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x40000000>;
+	};
+
+	ext_gmac: ext_gmac {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "ext_gmac";
+		#clock-cells = <0>;
+	};
+
+	vcc_phy: vcc-phy-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		regulator-name = "vcc_phy";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&dmc {
+	rockchip,sdram-channel = /bits/ 8 <1 10 3 2 1 0 15 15>;
+	rockchip,pctl-timing = <0x96 0xC8 0x1F3 0xF 0x8000004D 0x4 0x4E 0x6 0x3
+		0x0 0x6 0x5 0xC 0x10 0x6 0x4 0x4
+		0x5 0x4 0x200 0x3 0xA 0x40 0x0 0x1
+		0x5 0x5 0x3 0xC 0x1E 0x100 0x0 0x4
+		0x0 0x924>;
+	rockchip,phy-timing = <0x220 0x1 0x0 0x0 0x0 0x4 0x60>;
+	rockchip,sdram-params = <0x428B188 0x0 0x21 0x472 0x15
+		0 300 3 0 120>;
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_MAC_EXTCLK>, <&cru SCLK_MAC>;
+	assigned-clock-parents = <&ext_gmac>, <&cru SCLK_MAC_EXTCLK>;
+	clock_in_out = "input";
+	phy-supply = <&vcc_phy>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-gpio = <&gpio2 RK_PD0 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 1000000>;
+	tx_delay = <0x30>;
+	rx_delay = <0x10>;
+	status = "okay";
+};
+
+&emmc {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};