arm: dts: arria10: Update dtsi/dts from Linux

Update these 3 files from Linux:.
- socfpga_arria10.dtsi (Commit ID c1459a9d7e92)
- socfpga_arria10_socdk.dtsi (Commit ID d9b9f805ee2b)
- socfpga_arria10_socdk_sdmmc.dts (Commit ID 17808d445b6f)

Change in socfpga_arria10.dtsi:
- Add clkmgr label, so that can reference to it in u-boot.dtsi.

Change in socfpga_arria10-u-boot.dtsi:
- Add compatible and altr,sysmgr-syscon for uboot.

Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>

1 files changed, 62 insertions, 28 deletions

diff --git a/arch/arm/dts/socfpga_arria10.dtsi b/arch/arm/dts/socfpga_arria10.dtsi
index c8cd5a84b8..a598c75542 100644
--- a/arch/arm/dts/socfpga_arria10.dtsi
+++ b/arch/arm/dts/socfpga_arria10.dtsi
@@ -1,17 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright Altera Corporation (C) 2014. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -79,6 +68,8 @@
 				#dma-requests = <32>;
 				clocks = <&l4_main_clk>;
 				clock-names = "apb_pclk";
+				resets = <&rst DMA_RESET>, <&rst DMA_OCP_RESET>;
+				reset-names = "dma", "dma-ocp";
 			};
 		};
 
@@ -377,13 +368,28 @@
 						clk-gate = <0xC8 11>;
 					};
 
-					nand_clk: nand_clk {
+					nand_x_clk: nand_x_clk {
 						#clock-cells = <0>;
 						compatible = "altr,socfpga-a10-gate-clk";
 						clocks = <&l4_mp_clk>;
 						clk-gate = <0xC8 10>;
 					};
 
+					nand_ecc_clk: nand_ecc_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-gate-clk";
+						clocks = <&nand_x_clk>;
+						clk-gate = <0xC8 10>;
+					};
+
+					nand_clk: nand_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-gate-clk";
+						clocks = <&nand_x_clk>;
+						fixed-divider = <4>;
+						clk-gate = <0xC8 10>;
+					};
+
 					spi_m_clk: spi_m_clk {
 						#clock-cells = <0>;
 						compatible = "altr,socfpga-a10-gate-clk";
@@ -414,7 +420,7 @@
 		};
 
 		gmac0: ethernet@ff800000 {
-			compatible = "altr,socfpga-stmmac", "snps,dwmac-3.72a", "snps,dwmac";
+			compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.72a", "snps,dwmac";
 			altr,sysmgr-syscon = <&sysmgr 0x44 0>;
 			reg = <0xff800000 0x2000>;
 			interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
@@ -434,8 +440,8 @@
 		};
 
 		gmac1: ethernet@ff802000 {
-			compatible = "altr,socfpga-stmmac", "snps,dwmac-3.72a", "snps,dwmac";
-			altr,sysmgr-syscon = <&sysmgr 0x48 0>;
+			compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.72a", "snps,dwmac";
+			altr,sysmgr-syscon = <&sysmgr 0x48 8>;
 		        reg = <0xff802000 0x2000>;
 			interrupts = <0 93 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "macirq";
@@ -454,8 +460,8 @@
 		};
 
 		gmac2: ethernet@ff804000 {
-			compatible = "altr,socfpga-stmmac", "snps,dwmac-3.72a", "snps,dwmac";
-			altr,sysmgr-syscon = <&sysmgr 0x4C 0>;
+			compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.72a", "snps,dwmac";
+			altr,sysmgr-syscon = <&sysmgr 0x4C 16>;
 			reg = <0xff804000 0x2000>;
 			interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "macirq";
@@ -478,6 +484,7 @@
 			#size-cells = <0>;
 			compatible = "snps,dw-apb-gpio";
 			reg = <0xffc02900 0x100>;
+			resets = <&rst GPIO0_RESET>;
 			status = "disabled";
 
 			porta: gpio-controller@0 {
@@ -497,6 +504,7 @@
 			#size-cells = <0>;
 			compatible = "snps,dw-apb-gpio";
 			reg = <0xffc02a00 0x100>;
+			resets = <&rst GPIO1_RESET>;
 			status = "disabled";
 
 			portb: gpio-controller@0 {
@@ -516,6 +524,7 @@
 			#size-cells = <0>;
 			compatible = "snps,dw-apb-gpio";
 			reg = <0xffc02b00 0x100>;
+			resets = <&rst GPIO2_RESET>;
 			status = "disabled";
 
 			portc: gpio-controller@0 {
@@ -594,22 +603,35 @@
 			status = "disabled";
 		};
 
+		spi0: spi@ffda4000 {
+			compatible = "snps,dw-apb-ssi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xffda4000 0x100>;
+			interrupts = <0 101 4>;
+			num-cs = <4>;
+			/*32bit_access;*/
+			clocks = <&spi_m_clk>;
+			resets = <&rst SPIM0_RESET>;
+			status = "disabled";
+		};
+
 		spi1: spi@ffda5000 {
 			compatible = "snps,dw-apb-ssi";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0xffda5000 0x100>;
 			interrupts = <0 102 4>;
-			num-chipselect = <4>;
-			bus-num = <0>;
+			num-cs = <4>;
 			/*32bit_access;*/
 			tx-dma-channel = <&pdma 16>;
 			rx-dma-channel = <&pdma 17>;
 			clocks = <&spi_m_clk>;
+			resets = <&rst SPIM1_RESET>;
 			status = "disabled";
 		};
 
-		sdr: sdr@ffc25000 {
+		sdr: sdr@ffcfb100 {
 			compatible = "altr,sdr-ctl", "syscon";
 			reg = <0xffcfb100 0x80>;
 		};
@@ -640,14 +662,14 @@
 
 		nand: nand@ffb90000 {
 			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "denali,denali-nand-dt", "altr,socfpga-denali-nand";
-			reg = <0xffb90000 0x20>,
-			      <0xffb80000 0x1000>;
+			#size-cells = <0>;
+			compatible = "altr,socfpga-denali-nand";
+			reg = <0xffb90000 0x72000>,
+			      <0xffb80000 0x10000>;
 			reg-names = "nand_data", "denali_reg";
 			interrupts = <0 99 4>;
-			dma-mask = <0xffffffff>;
-			clocks = <&nand_clk>;
+			clocks = <&nand_clk>, <&nand_x_clk>, <&nand_ecc_clk>;
+			clock-names = "nand", "nand_x", "ecc";
 			resets = <&rst NAND_RESET>;
 			status = "disabled";
 		};
@@ -733,6 +755,8 @@
 			cdns,fifo-width = <4>;
 			cdns,trigger-address = <0x00000000>;
 			clocks = <&qspi_clk>;
+			resets = <&rst QSPI_RESET>, <&rst QSPI_OCP_RESET>;
+			reset-names = "qspi", "qspi-ocp";
 			status = "disabled";
 		};
 
@@ -758,7 +782,7 @@
 		timer@ffffc600 {
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0xffffc600 0x100>;
-			interrupts = <1 13 0xf04>;
+			interrupts = <1 13 0xf01>;
 			clocks = <&mpu_periph_clk>;
 		};
 
@@ -768,6 +792,8 @@
 			reg = <0xffc02700 0x100>;
 			clocks = <&l4_sp_clk>;
 			clock-names = "timer";
+			resets = <&rst SPTIMER0_RESET>;
+			reset-names = "timer";
 		};
 
 		timer1: timer1@ffc02800 {
@@ -776,6 +802,8 @@
 			reg = <0xffc02800 0x100>;
 			clocks = <&l4_sp_clk>;
 			clock-names = "timer";
+			resets = <&rst SPTIMER1_RESET>;
+			reset-names = "timer";
 		};
 
 		timer2: timer2@ffd00000 {
@@ -784,6 +812,8 @@
 			reg = <0xffd00000 0x100>;
 			clocks = <&l4_sys_free_clk>;
 			clock-names = "timer";
+			resets = <&rst L4SYSTIMER0_RESET>;
+			reset-names = "timer";
 		};
 
 		timer3: timer3@ffd00100 {
@@ -792,6 +822,8 @@
 			reg = <0xffd01000 0x100>;
 			clocks = <&l4_sys_free_clk>;
 			clock-names = "timer";
+			resets = <&rst L4SYSTIMER1_RESET>;
+			reset-names = "timer";
 		};
 
 		uart0: serial0@ffc02000 {
@@ -853,6 +885,7 @@
 			reg = <0xffd00200 0x100>;
 			interrupts = <0 119 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&l4_sys_free_clk>;
+			resets = <&rst L4WD0_RESET>;
 			status = "disabled";
 		};
 
@@ -861,6 +894,7 @@
 			reg = <0xffd00300 0x100>;
 			interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&l4_sys_free_clk>;
+			resets = <&rst L4WD1_RESET>;
 			status = "disabled";
 		};
 	};