ARM: dts: stm32mp1: DDR config v1.44

Update DDR configuration with the latest update:

- PUBL_regs: DXnGCR[0]= according to ddr_width to disable Byte
                        lane 2/3 in 16bit
- fix LPDDR2/3 timing_calc to step RL/WL in relaxed
  timings mode
- remove  LPDDR3 RL3 (optional) support vs  MR0[7]
  because MR0[7] can't be read instead  always apply
  worse RL/WL for LPDDR3 when freq < 166MHz)
- change  MR3 to 48ohm drive  for LPDDR2/3
- change default ZPROG[7:4] = 0x1 for LPDDR2/3 ,
  '0' is not allowed even when ODT not used
- use DQSTRN for LPDDR2/3 (it was not set in PIR)
- LPDDR3: set dqsge/dwsgx gate extension to 2,2
  like LPDDR2
-DDRCTRL.dfitmg0:
  + for LPDDR3 tphy_wrlat = WL (as LPDDR2)
  + improvement for relaxed mode vs  RL/Wl at corner case.
    For example @533MHz RL/WL (relaxed) = 9/5 for LPDDR2/3
    and correction to MR2 accordingly
- DDR_PCFGQOS1_1: port1 timeout relaxed from 0x00 to 0x40,
  for LTDC.
- DDR_PCFGWQOS0_0: change vpr level from
  11 to 12 in order to include the CPU on
  the variable priority queue.
- DDR_SCHED: fix to consider 13 levels  (13 levels - 1 = 0xC)

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>

1 files changed, 11 insertions, 11 deletions

diff --git a/arch/arm/dts/stm32mp15-ddr3-2x4Gb-1066-binG.dtsi b/arch/arm/dts/stm32mp15-ddr3-2x4Gb-1066-binG.dtsi
index 99e5200523..8158a56f13 100644
--- a/arch/arm/dts/stm32mp15-ddr3-2x4Gb-1066-binG.dtsi
+++ b/arch/arm/dts/stm32mp15-ddr3-2x4Gb-1066-binG.dtsi
@@ -1,9 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
 /*
  * Copyright (C) 2018, STMicroelectronics - All Rights Reserved
- */
-
-/* STM32MP157C ED1 and ED2 BOARD configuration
+ *
+ * STM32MP157C ED1 BOARD configuration
  * 2x DDR3L 4Gb each, 16-bit, 533MHz, Single Die Package in flyby topology.
  * Reference used NT5CC256M16DP-DI from NANYA
  *
@@ -15,9 +14,10 @@
  * timing mode	optimized
  * Scheduling/QoS options : type = 2
  * address mapping : RBC
+ * Tc > + 85C : N
  */
 
-#define DDR_MEM_NAME "DDR3-1066 bin G 2x4Gb 533MHz v1.36"
+#define DDR_MEM_NAME "DDR3-1066/888 bin G 2x4Gb 533MHz v1.44"
 #define DDR_MEM_SPEED 533000
 #define DDR_MEM_SIZE 0x40000000
 
@@ -62,7 +62,7 @@
 #define DDR_ADDRMAP11 0x00000000
 #define DDR_ODTCFG 0x06000600
 #define DDR_ODTMAP 0x00000001
-#define DDR_SCHED 0x00001201
+#define DDR_SCHED 0x00000C01
 #define DDR_SCHED1 0x00000000
 #define DDR_PERFHPR1 0x01000001
 #define DDR_PERFLPR1 0x08000200
@@ -74,15 +74,15 @@
 #define DDR_PCCFG 0x00000010
 #define DDR_PCFGR_0 0x00010000
 #define DDR_PCFGW_0 0x00000000
-#define DDR_PCFGQOS0_0 0x02100B03
+#define DDR_PCFGQOS0_0 0x02100C03
 #define DDR_PCFGQOS1_0 0x00800100
-#define DDR_PCFGWQOS0_0 0x01100B03
+#define DDR_PCFGWQOS0_0 0x01100C03
 #define DDR_PCFGWQOS1_0 0x01000200
 #define DDR_PCFGR_1 0x00010000
 #define DDR_PCFGW_1 0x00000000
-#define DDR_PCFGQOS0_1 0x02100B03
-#define DDR_PCFGQOS1_1 0x00800100
-#define DDR_PCFGWQOS0_1 0x01100B03
+#define DDR_PCFGQOS0_1 0x02100C03
+#define DDR_PCFGQOS1_1 0x00800040
+#define DDR_PCFGWQOS0_1 0x01100C03
 #define DDR_PCFGWQOS1_1 0x01000200
 #define DDR_PGCR 0x01442E02
 #define DDR_PTR0 0x0022AA5B
@@ -100,7 +100,7 @@
 #define DDR_MR2 0x00000208
 #define DDR_MR3 0x00000000
 #define DDR_ODTCR 0x00010000
-#define DDR_ZQ0CR1 0x0000005B
+#define DDR_ZQ0CR1 0x00000038
 #define DDR_DX0GCR 0x0000CE81
 #define DDR_DX0DLLCR 0x40000000
 #define DDR_DX0DQTR 0xFFFFFFFF