diff options
| author | Jagan Teki <jagan@amarulasolutions.com> | 2018-08-05 00:40:07 +0530 |
|---|---|---|
| committer | Jagan Teki <jagan@amarulasolutions.com> | 2018-09-28 22:09:24 +0530 |
| commit | 3c92cca3cda0d72c11c41bc0b07edcff127cf194 (patch) | |
| tree | 4c9b1428d591c1f6baf0d999e4f2460a2073400a /arch/arm/dts/sun4i-a10-mini-xplus.dts | |
| parent | bbef20d479441b01d62252cf127498c58078b2c3 (diff) | |
ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3
Update all A10 devicetree dtsi and dtsi files from Linux-v4.18-rc3
with below commit:
commit 590b0c0cfc6162aeebbf43eaafb9753b56df1532
Author: Pascal Roeleven <dev@pascalroeleven.nl>
Date: Fri Apr 20 12:21:12 2018 +0200
ARM: dts: sun4i: Fix incorrect clocks for displays
Note: Update pinctrl-0 for sun4i-a10-inet-3f.dts, sun4i-a10-inet-3w.dts
like other dts file since there dts file are U-Boot specific.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Diffstat (limited to 'arch/arm/dts/sun4i-a10-mini-xplus.dts')
| -rw-r--r-- | arch/arm/dts/sun4i-a10-mini-xplus.dts | 16 |
1 files changed, 5 insertions, 11 deletions
diff --git a/arch/arm/dts/sun4i-a10-mini-xplus.dts b/arch/arm/dts/sun4i-a10-mini-xplus.dts index a7dd86d30f..f9d74e2103 100644 --- a/arch/arm/dts/sun4i-a10-mini-xplus.dts +++ b/arch/arm/dts/sun4i-a10-mini-xplus.dts @@ -47,7 +47,6 @@ #include "sunxi-common-regulators.dtsi" #include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "PineRiver Mini X-Plus"; @@ -71,8 +70,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -87,22 +84,19 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pins>; status = "okay"; }; -&ir0_rx_pins_a { +&ir0_rx_pins { /* The ir receiver is not always populated */ - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + bias-pull-up; }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ status = "okay"; }; @@ -133,7 +127,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; |