ARM: dts: sun5i: Update A10s/A13/gr8/r8 dts(i) files from Linux-v4.18-rc3

Update all A10s/A13/gr8/r8devicetree dtsi and dtsi files from
Linux-v4.18-rc3 with below commit:
commit 190e3138f9577885691540dca59c2f07540bde04
Merge: cafc87023b0d a7affb13b271
Author: Arnd Bergmann <arnd@arndb.de>
Date:   Tue Mar 27 14:58:00 2018 +0200

    Merge tag 'sunxi-h3-h5-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>

1 files changed, 49 insertions, 33 deletions

diff --git a/arch/arm/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/dts/sun5i-a10s-olinuxino-micro.dts
index aef91476f9..2c902ed2c8 100644
--- a/arch/arm/dts/sun5i-a10s-olinuxino-micro.dts
+++ b/arch/arm/dts/sun5i-a10s-olinuxino-micro.dts
@@ -48,7 +48,6 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "Olimex A10s-Olinuxino Micro";
@@ -64,6 +63,17 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -77,13 +87,17 @@
 	};
 };
 
+&be0 {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
 
 &emac {
 	pinctrl-names = "default";
-	pinctrl-0 = <&emac_pins_a>;
+	pinctrl-0 = <&emac_pins_b>;
 	phy = <&phy1>;
 	status = "okay";
 };
@@ -92,6 +106,16 @@
 	status = "okay";
 };
 
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0_pins_a>;
@@ -177,8 +201,7 @@
 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino_micro>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
-	cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
-	cd-inverted;
+	cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */
 	status = "okay";
 };
 
@@ -187,8 +210,7 @@
 	pinctrl-0 = <&mmc1_pins_a>, <&mmc1_cd_pin_olinuxino_micro>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
-	cd-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
-	cd-inverted;
+	cd-gpios = <&pio 6 13 GPIO_ACTIVE_LOW>; /* PG13 */
 	status = "okay";
 };
 
@@ -202,38 +224,32 @@
 
 &pio {
 	mmc0_cd_pin_olinuxino_micro: mmc0_cd_pin@0 {
-		allwinner,pins = "PG1";
-		allwinner,function = "gpio_in";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+		pins = "PG1";
+		function = "gpio_in";
+		bias-pull-up;
 	};
 
 	mmc1_cd_pin_olinuxino_micro: mmc1_cd_pin@0 {
-		allwinner,pins = "PG13";
-		allwinner,function = "gpio_in";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+		pins = "PG13";
+		function = "gpio_in";
+		bias-pull-up;
 	};
 
 	led_pins_olinuxino: led_pins@0 {
-		allwinner,pins = "PE3";
-		allwinner,function = "gpio_out";
-		allwinner,drive = <SUN4I_PINCTRL_20_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+		pins = "PE3";
+		function = "gpio_out";
+		drive-strength = <20>;
 	};
 
 	usb1_vbus_pin_olinuxino_m: usb1_vbus_pin@0 {
-		allwinner,pins = "PB10";
-		allwinner,function = "gpio_out";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+		pins = "PB10";
+		function = "gpio_out";
 	};
 
 	usb0_id_detect_pin: usb0_id_detect_pin@0 {
-		allwinner,pins = "PG12";
-		allwinner,function = "gpio_in";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+		pins = "PG12";
+		function = "gpio_in";
+		bias-pull-up;
 	};
 };
 
@@ -250,8 +266,12 @@
 
 &spi2 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&spi2_pins_a>,
-		    <&spi2_cs0_pins_a>;
+	pinctrl-0 = <&spi2_pins_b>,
+		    <&spi2_cs0_pins_b>;
+	status = "okay";
+};
+
+&tcon0 {
 	status = "okay";
 };
 
@@ -263,7 +283,7 @@
 
 &uart2 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins_a>;
+	pinctrl-0 = <&uart2_pins_b>;
 	status = "okay";
 };
 
@@ -278,10 +298,6 @@
 	status = "okay";
 };
 
-&usb0_vbus_pin_a {
-	allwinner,pins = "PG11";
-};
-
 &usbphy {
 	pinctrl-names = "default";
 	pinctrl-0 = <&usb0_id_detect_pin>;