ARM: dts: sun7i: Update A20 dts(i) files from Linux-v4.18-rc3

Update all A10 devicetree dtsi and dtsi files from Linux-v4.18-rc3
with below commit:
commit 5d9ef839f874f4e3923c8a9ae7b136c6c3912cd5
Author: Stefan Mavrodiev <stefan@olimex.com>
Date:   Wed May 16 14:38:08 2018 +0300

    ARM: dts: sun7i: Add Olimex A20-SOM-EVB-eMMC board

Note:
- Update sun7i-a20-primo73.dts as per Linux, since
  this dts is U-Boot specific.
- Drop sun7i-a20-olimex-som-evb-emmc.dts since no board
  added for this.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>

1 files changed, 54 insertions, 30 deletions

diff --git a/arch/arm/dts/sun7i-a20-cubietruck.dts b/arch/arm/dts/sun7i-a20-cubietruck.dts
index 83f39b0362..5649161de1 100644
--- a/arch/arm/dts/sun7i-a20-cubietruck.dts
+++ b/arch/arm/dts/sun7i-a20-cubietruck.dts
@@ -48,7 +48,6 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "Cubietech Cubietruck";
@@ -62,6 +61,17 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -127,6 +137,10 @@
 	cpu-supply = <&reg_dcdc2>;
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -147,6 +161,16 @@
 	};
 };
 
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0_pins_a>;
@@ -179,11 +203,10 @@
 
 &mmc0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
-	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-	cd-inverted;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
 	status = "okay";
 };
 
@@ -196,7 +219,7 @@
 	non-removable;
 	status = "okay";
 
-	brcmf: bcrmf@1 {
+	brcmf: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 		interrupt-parent = <&pio>;
@@ -207,7 +230,7 @@
 
 &mmc3_pins_a {
 	/* AP6210 requires pull-up */
-	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	bias-pull-up;
 };
 
 &ohci0 {
@@ -224,45 +247,33 @@
 
 &pio {
 	ahci_pwr_pin_cubietruck: ahci_pwr_pin@1 {
-		allwinner,pins = "PH12";
-		allwinner,function = "gpio_out";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+		pins = "PH12";
+		function = "gpio_out";
 	};
 
 	led_pins_cubietruck: led_pins@0 {
-		allwinner,pins = "PH7", "PH11", "PH20", "PH21";
-		allwinner,function = "gpio_out";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+		pins = "PH7", "PH11", "PH20", "PH21";
+		function = "gpio_out";
 	};
 
 	mmc3_pwrseq_pin_cubietruck: mmc3_pwrseq_pin@0 {
-		allwinner,pins = "PH9";
-		allwinner,function = "gpio_out";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+		pins = "PH9";
+		function = "gpio_out";
 	};
 
 	usb0_vbus_pin_a: usb0_vbus_pin@0 {
-		allwinner,pins = "PH17";
-		allwinner,function = "gpio_out";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+		pins = "PH17";
+		function = "gpio_out";
 	};
 
 	usb0_id_detect_pin: usb0_id_detect_pin@0 {
-		allwinner,pins = "PH19";
-		allwinner,function = "gpio_in";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+		pins = "PH19";
+		function = "gpio_in";
 	};
 
 	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
-		allwinner,pins = "PH22";
-		allwinner,function = "gpio_in";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+		pins = "PH22";
+		function = "gpio_in";
 	};
 };
 
@@ -280,6 +291,14 @@
 
 #include "axp209.dtsi"
 
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
 &reg_dcdc2 {
 	regulator-always-on;
 	regulator-min-microvolt = <1000000>;
@@ -336,11 +355,16 @@
 	status = "okay";
 };
 
+&usb_power_supply {
+	status = "okay";
+};
+
 &usbphy {
 	pinctrl-names = "default";
 	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
 	usb0_id_det-gpios = <&pio 7 19 GPIO_ACTIVE_HIGH>; /* PH19 */
 	usb0_vbus_det-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
 	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;