ARM: dts: sun8i: Update A23/A33/r16 dts(i) files from Linux-v4.18-rc3

Update all A23/A33/r16 devicetree dtsi and dtsi files from
Linux-v4.18-rc3 with below commits.

A23:
commit bc3bd041fe766219a44688b182c260064007f0cc
Author: Miquel Raynal <miquel.raynal@bootlin.com>
Date:   Tue Apr 24 17:55:02 2018 +0200

    ARM: dts: sun8i: a23/a33: declare NAND pins

A33:
commit 88fe315d2c0a397ef42d7639addab0e021ae911d
Author: Maxime Ripard <maxime.ripard@bootlin.com>
Date:   Wed Apr 4 11:57:15 2018 +0200

    ARM: dts: sun8i: a33: Add the DSI-related nodes

r16:
commit 9621d0bd1b0d61167e1853ac68cf4869c31bcc96
Author: Miquel Raynal <miquel.raynal@bootlin.com>
Date:   Tue Apr 24 17:55:03 2018 +0200

    ARM: dts: nes: add Nintendo NES/SuperNES Classic Edition support

Note:
- Drop pinctrl from sun8i-r16-nintendo-nes-classic-edition.dts since
  sun8i-a23-a33.dtsi is added with Linux sync.
- Don't sync non U-Boot supported dts files
   sun8i-a23-ippo-q8h-v1.2.dts
   sun8i-a23-ippo-q8h-v5.dts
   sun8i-a33-et-q8-v1.6.dts
   sun8i-a33-ippo-q8h-v1.2.dts
   sun8i-r16-nintendo-nes-classic.dts
   sun8i-r16-nintendo-super-nes-classic.dts

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>

1 files changed, 31 insertions, 28 deletions

diff --git a/arch/arm/dts/sun8i-reference-design-tablet.dtsi b/arch/arm/dts/sun8i-reference-design-tablet.dtsi
index f29897c40a..880096c7e2 100644
--- a/arch/arm/dts/sun8i-reference-design-tablet.dtsi
+++ b/arch/arm/dts/sun8i-reference-design-tablet.dtsi
@@ -50,8 +50,6 @@
 
 	backlight: backlight {
 		compatible = "pwm-backlight";
-		pinctrl-names = "default";
-		pinctrl-0 = <&bl_en_pin>;
 		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
 		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
 		default-brightness-level = <8>;
@@ -71,15 +69,13 @@
 	 */
 	clock-frequency = <400000>;
 
-	gsl1680: touchscreen@40 {
-		compatible = "silead,gsl1680";
-		reg = <0x40>;
+	touchscreen: touchscreen@0 {
 		interrupt-parent = <&pio>;
 		interrupts = <1 5 IRQ_TYPE_EDGE_FALLING>; /* PB5 */
 		pinctrl-names = "default";
 		pinctrl-0 = <&ts_power_pin>;
 		power-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-		/* Most tablets use this touchscreen, but not all */
+		/* Tablet dts must provide reg and compatible */
 		status = "disabled";
 	};
 };
@@ -89,38 +85,26 @@
 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
 	vmmc-supply = <&reg_dcdc1>;
 	bus-width = <4>;
-	cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
-	cd-inverted;
+	cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */
 	status = "okay";
 };
 
 &pio {
-	bl_en_pin: bl_en_pin@0 {
-		allwinner,pins = "PH6";
-		allwinner,function = "gpio_in";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-	};
-
 	mmc0_cd_pin: mmc0_cd_pin@0 {
-		allwinner,pins = "PB4";
-		allwinner,function = "gpio_in";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+		pins = "PB4";
+		function = "gpio_in";
+		bias-pull-up;
 	};
 
 	ts_power_pin: ts_power_pin@0 {
-		allwinner,pins = "PH1";
-		allwinner,function = "gpio_out";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+		pins = "PH1";
+		function = "gpio_out";
 	};
 
 	usb0_id_detect_pin: usb0_id_detect_pin@0 {
-		allwinner,pins = "PH8";
-		allwinner,function = "gpio_in";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+		pins = "PH8";
+		function = "gpio_in";
+		bias-pull-up;
 	};
 };
 
@@ -138,7 +122,15 @@
 	};
 };
 
-#include "axp22x.dtsi"
+#include "axp223.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
 
 &reg_aldo1 {
 	regulator-always-on;
@@ -211,10 +203,21 @@
 	status = "okay";
 };
 
+&reg_ldo_io1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-touchscreen";
+	status = "okay";
+};
+
 &reg_rtc_ldo {
 	regulator-name = "vcc-rtc";
 };
 
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
 &r_uart {
 	pinctrl-names = "default";
 	pinctrl-0 = <&r_uart_pins_a>;