summaryrefslogtreecommitdiff
path: root/arch/arm/dts/tegra20-colibri.dts
diff options
context:
space:
mode:
authorMarcel Ziswiler <marcel.ziswiler@toradex.com>2016-09-28 11:24:08 +0200
committerTom Warren <twarren@nvidia.com>2016-10-10 10:44:37 -0700
commit28f224a52fee79ce83013707632dda62bf061d9b (patch)
treeb65b488624cec0d190b162fb93bdd066f44aab0d /arch/arm/dts/tegra20-colibri.dts
parentdc06f63f2ac566746dd6aae4aeb76bed40928ed4 (diff)
colibri_t20: fix display configuration
Without this patch the following error will be shown: stdio_add_devices: Video device failed (ret=-22) As commit ec5507707a1d1e84056a6c864338f95f6118d3ca (video: tegra: Move to using simple-panel and pwm-backlight) states the Colibri T20 needs updating too which this patch finally attempts doing. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
Diffstat (limited to 'arch/arm/dts/tegra20-colibri.dts')
-rw-r--r--arch/arm/dts/tegra20-colibri.dts71
1 files changed, 51 insertions, 20 deletions
diff --git a/arch/arm/dts/tegra20-colibri.dts b/arch/arm/dts/tegra20-colibri.dts
index 777f63e5bd..c198eefdba 100644
--- a/arch/arm/dts/tegra20-colibri.dts
+++ b/arch/arm/dts/tegra20-colibri.dts
@@ -21,12 +21,24 @@
};
host1x@50000000 {
- status = "okay";
dc@54200000 {
- status = "okay";
rgb {
status = "okay";
nvidia,panel = <&lcd_panel>;
+ display-timings {
+ timing@0 {
+ /* VESA VGA */
+ clock-frequency = <25175000>;
+ hactive = <640>;
+ vactive = <480>;
+ hback-porch = <48>;
+ hfront-porch = <16>;
+ hsync-len = <96>;
+ vback-porch = <31>;
+ vfront-porch = <11>;
+ vsync-len = <2>;
+ };
+ };
};
};
};
@@ -61,6 +73,10 @@
};
};
+ pwm@7000a000 {
+ status = "okay";
+ };
+
/*
* GEN1_I2C: I2C_SDA/SCL on SODIMM pin 194/196 (e.g. RTC on carrier
* board)
@@ -92,6 +108,18 @@
cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>;
};
+ backlight: backlight {
+ compatible = "pwm-backlight";
+
+ brightness-levels = <255 128 64 32 16 8 4 0>;
+ default-brightness-level = <6>;
+ /* BL_ON */
+ enable-gpios = <&gpio TEGRA_GPIO(T, 4) GPIO_ACTIVE_HIGH>;
+ power-supply = <&reg_3v3>;
+ /* PWM<A> */
+ pwms = <&pwm 0 5000000>;
+ };
+
clocks {
compatible = "simple-bus";
#address-cells = <1>;
@@ -105,25 +133,28 @@
};
};
- pwm: pwm@7000a000 {
- status = "okay";
+ lcd_panel: panel {
+ /*
+ * edt,et057090dhu: EDT 5.7" LCD TFT
+ * edt,et070080dh6: EDT 7.0" LCD TFT
+ */
+ compatible = "edt,et057090dhu", "simple-panel";
+
+ backlight = <&backlight>;
};
- lcd_panel: panel {
- clock = <25175000>;
- xres = <640>;
- yres = <480>;
- left-margin = <48>; /* horizontal back porch */
- right-margin = <16>; /* horizontal front porch */
- hsync-len = <96>;
- lower-margin = <11>; /* vertical front porch */
- upper-margin = <31>; /* vertical back porch */
- vsync-len = <2>;
- hsync-active-high;
- vsync-active-high;
- nvidia,bits-per-pixel = <16>;
- nvidia,pwm = <&pwm 0 0>;
- nvidia,backlight-enable-gpios = <&gpio TEGRA_GPIO(T, 4) GPIO_ACTIVE_HIGH>;
- nvidia,panel-timings = <0 0 0 0>;
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_3v3: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "+V3.3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
};
};