ARM: dts: uniphier: sync clock/reset controller nodes with Linux

Sync device trees with Linux for easier DT life.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

1 files changed, 59 insertions, 21 deletions

diff --git a/arch/arm/dts/uniphier-ph1-ld11.dtsi b/arch/arm/dts/uniphier-ph1-ld11.dtsi
index ffe04f5cb6..0bdbbddd9d 100644
--- a/arch/arm/dts/uniphier-ph1-ld11.dtsi
+++ b/arch/arm/dts/uniphier-ph1-ld11.dtsi
@@ -54,12 +54,6 @@
 			clock-frequency = <25000000>;
 		};
 
-		uart_clk: uart_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <58820000>;
-		};
-
 		i2c_clk: i2c_clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
@@ -69,10 +63,10 @@
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts = <1 13 0xf01>,
-			     <1 14 0xf01>,
-			     <1 11 0xf01>,
-			     <1 10 0xf01>;
+		interrupts = <1 13 4>,
+			     <1 14 4>,
+			     <1 11 4>,
+			     <1 10 4>;
 	};
 
 	soc {
@@ -89,7 +83,7 @@
 			interrupts = <0 33 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart0>;
-			clocks = <&uart_clk>;
+			clocks = <&peri_clk 0>;
 			clock-frequency = <58820000>;
 		};
 
@@ -100,7 +94,7 @@
 			interrupts = <0 35 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart1>;
-			clocks = <&uart_clk>;
+			clocks = <&peri_clk 1>;
 			clock-frequency = <58820000>;
 		};
 
@@ -111,7 +105,7 @@
 			interrupts = <0 37 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart2>;
-			clocks = <&uart_clk>;
+			clocks = <&peri_clk 2>;
 			clock-frequency = <58820000>;
 		};
 
@@ -122,7 +116,7 @@
 			interrupts = <0 177 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart3>;
-			clocks = <&uart_clk>;
+			clocks = <&peri_clk 3>;
 			clock-frequency = <58820000>;
 		};
 
@@ -213,6 +207,22 @@
 			reg = <0x59801000 0x400>;
 		};
 
+		perictrl@59820000 {
+			compatible = "socionext,uniphier-perictrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59820000 0x200>;
+
+			peri_clk: clock {
+				compatible = "socionext,uniphier-ld11-peri-clock";
+				#clock-cells = <1>;
+			};
+
+			peri_rst: reset {
+				compatible = "socionext,uniphier-ld11-peri-reset";
+				#reset-cells = <1>;
+			};
+		};
+
 		usb0: usb@5a800100 {
 			compatible = "socionext,uniphier-ehci", "generic-ehci";
 			status = "disabled";
@@ -220,7 +230,7 @@
 			interrupts = <0 243 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb0>;
-			clocks = <&mio 3>, <&mio 6>;
+			clocks = <&mio_clk 3>, <&mio_clk 6>;
 		};
 
 		usb1: usb@5a810100 {
@@ -230,7 +240,7 @@
 			interrupts = <0 244 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb1>;
-			clocks = <&mio 4>, <&mio 6>;
+			clocks = <&mio_clk 4>, <&mio_clk 6>;
 		};
 
 		usb2: usb@5a820100 {
@@ -240,17 +250,29 @@
 			interrupts = <0 245 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb2>;
-			clocks = <&mio 5>, <&mio 6>;
+			clocks = <&mio_clk 5>, <&mio_clk 6>;
 		};
 
-		mio: mioctrl@5b3e0000 {
-			compatible = "socionext,ph1-ld11-mioctrl";
+		mioctrl@5b3e0000 {
+			compatible = "socionext,uniphier-mioctrl",
+				     "simple-mfd", "syscon";
 			reg = <0x5b3e0000 0x800>;
-			#clock-cells = <1>;
+
+			mio_clk: clock {
+				compatible = "socionext,uniphier-ld11-mio-clock";
+				#clock-cells = <1>;
+			};
+
+			mio_rst: reset {
+				compatible = "socionext,uniphier-ld11-mio-reset";
+				#reset-cells = <1>;
+				resets = <&sys_rst 7>;
+			};
 		};
 
 		soc-glue@5f800000 {
-			compatible = "simple-mfd", "syscon";
+			compatible = "socionext,uniphier-soc-glue",
+				     "simple-mfd", "syscon";
 			reg = <0x5f800000 0x2000>;
 			u-boot,dm-pre-reloc;
 
@@ -273,6 +295,22 @@
 			#interrupt-cells = <3>;
 			interrupts = <1 9 4>;
 		};
+
+		sysctrl@61840000 {
+			compatible = "socionext,uniphier-ld11-sysctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x61840000 0x4000>;
+
+			sys_clk: clock {
+				compatible = "socionext,uniphier-ld11-clock";
+				#clock-cells = <1>;
+			};
+
+			sys_rst: reset {
+				compatible = "socionext,uniphier-ld11-reset";
+				#reset-cells = <1>;
+			};
+		};
 	};
 };