Merge branch 'master' of git://git.denx.de/u-boot-arm

* 'master' of git://git.denx.de/u-boot-arm:
  arm, davinci: add DAVINCI_MMC_CLKID
  arm, davinci_emac: fix driver bug if more then 3 PHYs are detected
  arm, davinci: da850/dm365 lowlevel cleanup
  omap5: Add omap5_evm board build support.
  omap4/5: Add support for booting with CH.
  omap5: emif: Add emif/ddr configurations required for omap5 evm
  omap5: clocks: Add clocks support for omap5 platform.
  omap5: Add minimal support for omap5430.
  omap: Checkpatch fixes
  omap4: make omap4 code common for future reuse
  GCC4.6: Squash warnings in onenand_base.c
  GCC4.6: Fix common/usb.c on xscale
  OneNAND: Add simple OneNAND SPL
  PXA: vpac270: Enable the new generic MMC driver
  PXA: Cleanup serial_pxa
  PXA: Drop csb226 and innokom boards (unmaintained)
  m28evk: Fix comment about the number of RAM banks
  mx31: Fix checkpatch warnings in generic.c
  mx31: Use proper IO accessor for GPR register
  mx31: Remove duplicate definition for GPR register
  qong: Use generic function for configuring GPR register
  M28EVK: Enable USB HOST support
  iMX28: Add USB HOST driver
  iMX28: Add USB and USB PHY register definitions
  M28: Add memory detection into SPL
  iMX28: Fix ARM vector handling
  M28: Add doc/README.m28 documentation
  M28: Add MMC SPL
  iMX28: Add support for DENX M28EVK board
  iMX28: Add u-boot.sb target to Makefile
  iMX28: Add image header generator tool
  iMX28: Add driver for internal RTC
  iMX28: Add GPMI NAND driver
  iMX28: Add APBH DMA driver
  iMX28: Add SPI driver
  iMX28: Add GPIO control
  iMX28: Add I2C bus driver
  iMX28: Add PINMUX control
  FEC: Add support for iMX28 quirks
  iMX28: Add SSP MMC driver
  iMX28: Initial support for iMX28 CPU
  MX25: zmx25: GCC4.6 fix build warnings
  da850: add new config file for AM18xx
  BeagleBoard: config: Switch to ttyO2
  OMAP3: Change omap3_evm maintainer
  devkit8000: Fix NAND SPL on boards with 256MB NAND
  integrator: enable Vpp and disable flash protection
  integrator: add system controller header
  integrator: make flash writeable on boot
  integrator: use io-accessors for board init
  integrator: move text offset to config
  integrator: pass configs for core modules
  ARM: remove superfluous setting of arch_number in board specific code.
  SPL: Allow ARM926EJS to avoid compiling in the CPU support code
  integrator: do not test first part of the memory
  arm: a320: fix broken timer
  ARM: define CONFIG_MACH_TYPE for all ronetix boards
  dm646x: pass board revision info to kernel
  dm646x: add new configuration for dm6467T
  arm, davinci: Fix setting of the SDRAM configuration register
  arm, davinci: Remove the duplication of LPSC functions
  arm, davinci: Rename AM1808 lowlevel functions to DA850
  da8xxevm: fix build error
  ARM: re-add MACH_TYPE_XXXXXX for VCMA9 board and add CONFIG_MACH_TYPE

1 files changed, 170 insertions, 0 deletions

diff --git a/arch/arm/include/asm/arch-mx28/dma.h b/arch/arm/include/asm/arch-mx28/dma.h
new file mode 100644
index 0000000000..7061e7c2fe
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx28/dma.h
@@ -0,0 +1,170 @@
+/*
+ * Freescale i.MX28 APBH DMA
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * Based on code from LTIB:
+ * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#ifndef __DMA_H__
+#define __DMA_H__
+
+#include <linux/list.h>
+
+#ifndef	CONFIG_ARCH_DMA_PIO_WORDS
+#define	DMA_PIO_WORDS		15
+#else
+#define	DMA_PIO_WORDS		CONFIG_ARCH_DMA_PIO_WORDS
+#endif
+
+#define MXS_DMA_ALIGNMENT	32
+
+/*
+ * MXS DMA channels
+ */
+enum {
+	MXS_DMA_CHANNEL_AHB_APBH_SSP0 = 0,
+	MXS_DMA_CHANNEL_AHB_APBH_SSP1,
+	MXS_DMA_CHANNEL_AHB_APBH_SSP2,
+	MXS_DMA_CHANNEL_AHB_APBH_SSP3,
+	MXS_DMA_CHANNEL_AHB_APBH_GPMI0,
+	MXS_DMA_CHANNEL_AHB_APBH_GPMI1,
+	MXS_DMA_CHANNEL_AHB_APBH_GPMI2,
+	MXS_DMA_CHANNEL_AHB_APBH_GPMI3,
+	MXS_DMA_CHANNEL_AHB_APBH_GPMI4,
+	MXS_DMA_CHANNEL_AHB_APBH_GPMI5,
+	MXS_DMA_CHANNEL_AHB_APBH_GPMI6,
+	MXS_DMA_CHANNEL_AHB_APBH_GPMI7,
+	MXS_DMA_CHANNEL_AHB_APBH_SSP,
+	MXS_MAX_DMA_CHANNELS,
+};
+
+/*
+ * MXS DMA hardware command.
+ *
+ * This structure describes the in-memory layout of an entire DMA command,
+ * including space for the maximum number of PIO accesses. See the appropriate
+ * reference manual for a detailed description of what these fields mean to the
+ * DMA hardware.
+ */
+#define	MXS_DMA_DESC_COMMAND_MASK	0x3
+#define	MXS_DMA_DESC_COMMAND_OFFSET	0
+#define	MXS_DMA_DESC_COMMAND_NO_DMAXFER	0x0
+#define	MXS_DMA_DESC_COMMAND_DMA_WRITE	0x1
+#define	MXS_DMA_DESC_COMMAND_DMA_READ	0x2
+#define	MXS_DMA_DESC_COMMAND_DMA_SENSE	0x3
+#define	MXS_DMA_DESC_CHAIN		(1 << 2)
+#define	MXS_DMA_DESC_IRQ		(1 << 3)
+#define	MXS_DMA_DESC_NAND_LOCK		(1 << 4)
+#define	MXS_DMA_DESC_NAND_WAIT_4_READY	(1 << 5)
+#define	MXS_DMA_DESC_DEC_SEM		(1 << 6)
+#define	MXS_DMA_DESC_WAIT4END		(1 << 7)
+#define	MXS_DMA_DESC_HALT_ON_TERMINATE	(1 << 8)
+#define	MXS_DMA_DESC_TERMINATE_FLUSH	(1 << 9)
+#define	MXS_DMA_DESC_PIO_WORDS_MASK	(0xf << 12)
+#define	MXS_DMA_DESC_PIO_WORDS_OFFSET	12
+#define	MXS_DMA_DESC_BYTES_MASK		(0xffff << 16)
+#define	MXS_DMA_DESC_BYTES_OFFSET	16
+
+struct mxs_dma_cmd {
+	unsigned long		next;
+	unsigned long		data;
+	union {
+		dma_addr_t	address;
+		unsigned long	alternate;
+	};
+	unsigned long		pio_words[DMA_PIO_WORDS];
+};
+
+/*
+ * MXS DMA command descriptor.
+ *
+ * This structure incorporates an MXS DMA hardware command structure, along
+ * with metadata.
+ */
+#define	MXS_DMA_DESC_FIRST	(1 << 0)
+#define	MXS_DMA_DESC_LAST	(1 << 1)
+#define	MXS_DMA_DESC_READY	(1 << 31)
+
+struct mxs_dma_desc {
+	struct mxs_dma_cmd	cmd;
+	unsigned int		flags;
+	dma_addr_t		address;
+	void			*buffer;
+	struct list_head	node;
+};
+
+/**
+ * MXS DMA channel
+ *
+ * This structure represents a single DMA channel. The MXS platform code
+ * maintains an array of these structures to represent every DMA channel in the
+ * system (see mxs_dma_channels).
+ */
+#define	MXS_DMA_FLAGS_IDLE	0
+#define	MXS_DMA_FLAGS_BUSY	(1 << 0)
+#define	MXS_DMA_FLAGS_FREE	0
+#define	MXS_DMA_FLAGS_ALLOCATED	(1 << 16)
+#define	MXS_DMA_FLAGS_VALID	(1 << 31)
+
+struct mxs_dma_chan {
+	const char *name;
+	unsigned long dev;
+	struct mxs_dma_device *dma;
+	unsigned int flags;
+	unsigned int active_num;
+	unsigned int pending_num;
+	struct list_head active;
+	struct list_head done;
+};
+
+/* Hardware management ops */
+int mxs_dma_enable(int channel);
+int mxs_dma_disable(int channel);
+int mxs_dma_reset(int channel);
+int mxs_dma_freeze(int channel);
+int mxs_dma_unfreeze(int channel);
+int mxs_dma_read_semaphore(int channel);
+int mxs_dma_enable_irq(int channel, int enable);
+int mxs_dma_irq_is_pending(int channel);
+int mxs_dma_ack_irq(int channel);
+
+/* Channel management ops */
+int mxs_dma_request(int channel);
+int mxs_dma_release(int channel);
+
+/* Descriptor management ops */
+struct mxs_dma_desc *mxs_dma_desc_alloc(void);
+void mxs_dma_desc_free(struct mxs_dma_desc *);
+
+unsigned int mxs_dma_cmd_address(struct mxs_dma_desc *desc);
+int mxs_dma_desc_pending(struct mxs_dma_desc *pdesc);
+
+int mxs_dma_desc_append(int channel, struct mxs_dma_desc *pdesc);
+
+int mxs_dma_get_finished(int channel, struct list_head *head);
+int mxs_dma_finish(int channel, struct list_head *head);
+
+int mxs_dma_wait_complete(uint32_t timeout, unsigned int chan);
+int mxs_dma_go(int chan);
+
+int mxs_dma_init(void);
+
+#endif	/* __DMA_H__ */