Move architecture-specific includes to arch/$ARCH/include/asm

This helps to clean up the include/ directory so that it only contains
non-architecture-specific headers and also matches Linux's directory
layout which many U-Boot developers are already familiar with.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

1 files changed, 172 insertions, 0 deletions

diff --git a/arch/arm/include/asm/arch-omap24xx/i2c.h b/arch/arm/include/asm/arch-omap24xx/i2c.h
new file mode 100644
index 0000000000..19046aaab4
--- /dev/null
+++ b/arch/arm/include/asm/arch-omap24xx/i2c.h
@@ -0,0 +1,172 @@
+/*
+ * (C) Copyright 2004
+ * Texas Instruments, <www.ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _OMAP24XX_I2C_H_
+#define _OMAP24XX_I2C_H_
+
+#define I2C_BASE1		0x48070000
+#define I2C_BASE2               0x48072000 /* nothing hooked up on h4 */
+
+#define I2C_DEFAULT_BASE	I2C_BASE1
+
+struct i2c {
+	unsigned short rev;	/* 0x00 */
+	unsigned short res1;
+	unsigned short ie;	/* 0x04 */
+	unsigned short res2;
+	unsigned short stat;	/* 0x08 */
+	unsigned short res3;
+	unsigned short iv;	/* 0x0C */
+	unsigned short res4[3];
+	unsigned short buf;	/* 0x14 */
+	unsigned short res5;
+	unsigned short cnt;	/* 0x18 */
+	unsigned short res6;
+	unsigned short data;	/* 0x1C */
+	unsigned short res7;
+	unsigned short sysc;	/* 0x20 */
+	unsigned short res8;
+	unsigned short con;	/* 0x24 */
+	unsigned short res9;
+	unsigned short oa;	/* 0x28 */
+	unsigned short res10;
+	unsigned short sa;	/* 0x2C */
+	unsigned short res11;
+	unsigned short psc;	/* 0x30 */
+	unsigned short res12;
+	unsigned short scll;	/* 0x34 */
+	unsigned short res13;
+	unsigned short sclh;	/* 0x38 */
+	unsigned short res14;
+	unsigned short systest;	/* 0x3c */
+	unsigned short res15;
+};
+
+#define I2C_BUS_MAX	2
+
+/* I2C masks */
+
+/* I2C Interrupt Enable Register (I2C_IE): */
+#define I2C_IE_GC_IE    (1 << 5)
+#define I2C_IE_XRDY_IE  (1 << 4)        /* Transmit data ready interrupt enable */
+#define I2C_IE_RRDY_IE  (1 << 3)        /* Receive data ready interrupt enable */
+#define I2C_IE_ARDY_IE  (1 << 2)        /* Register access ready interrupt enable */
+#define I2C_IE_NACK_IE  (1 << 1)        /* No acknowledgment interrupt enable */
+#define I2C_IE_AL_IE    (1 << 0)        /* Arbitration lost interrupt enable */
+
+/* I2C Status Register (I2C_STAT): */
+
+#define I2C_STAT_SBD    (1 << 15)       /* Single byte data */
+#define I2C_STAT_BB     (1 << 12)       /* Bus busy */
+#define I2C_STAT_ROVR   (1 << 11)       /* Receive overrun */
+#define I2C_STAT_XUDF   (1 << 10)       /* Transmit underflow */
+#define I2C_STAT_AAS    (1 << 9)        /* Address as slave */
+#define I2C_STAT_GC     (1 << 5)
+#define I2C_STAT_XRDY   (1 << 4)        /* Transmit data ready */
+#define I2C_STAT_RRDY   (1 << 3)        /* Receive data ready */
+#define I2C_STAT_ARDY   (1 << 2)        /* Register access ready */
+#define I2C_STAT_NACK   (1 << 1)        /* No acknowledgment interrupt enable */
+#define I2C_STAT_AL     (1 << 0)        /* Arbitration lost interrupt enable */
+
+
+/* I2C Interrupt Code Register (I2C_INTCODE): */
+
+#define I2C_INTCODE_MASK        7
+#define I2C_INTCODE_NONE        0
+#define I2C_INTCODE_AL          1       /* Arbitration lost */
+#define I2C_INTCODE_NAK         2       /* No acknowledgement/general call */
+#define I2C_INTCODE_ARDY        3       /* Register access ready */
+#define I2C_INTCODE_RRDY        4       /* Rcv data ready */
+#define I2C_INTCODE_XRDY        5       /* Xmit data ready */
+
+/* I2C Buffer Configuration Register (I2C_BUF): */
+
+#define I2C_BUF_RDMA_EN         (1 << 15)       /* Receive DMA channel enable */
+#define I2C_BUF_XDMA_EN         (1 << 7)        /* Transmit DMA channel enable */
+
+/* I2C Configuration Register (I2C_CON): */
+
+#define I2C_CON_EN      (1 << 15)       /* I2C module enable */
+#define I2C_CON_BE      (1 << 14)       /* Big endian mode */
+#define I2C_CON_STB     (1 << 11)       /* Start byte mode (master mode only) */
+#define I2C_CON_MST     (1 << 10)       /* Master/slave mode */
+#define I2C_CON_TRX     (1 << 9)        /* Transmitter/receiver mode (master mode only) */
+#define I2C_CON_XA      (1 << 8)        /* Expand address */
+#define I2C_CON_STP     (1 << 1)        /* Stop condition (master mode only) */
+#define I2C_CON_STT     (1 << 0)        /* Start condition (master mode only) */
+
+/* I2C System Test Register (I2C_SYSTEST): */
+
+#define I2C_SYSTEST_ST_EN       (1 << 15)       /* System test enable */
+#define I2C_SYSTEST_FREE        (1 << 14)       /* Free running mode (on breakpoint) */
+#define I2C_SYSTEST_TMODE_MASK  (3 << 12)       /* Test mode select */
+#define I2C_SYSTEST_TMODE_SHIFT (12)            /* Test mode select */
+#define I2C_SYSTEST_SCL_I       (1 << 3)        /* SCL line sense input value */
+#define I2C_SYSTEST_SCL_O       (1 << 2)        /* SCL line drive output value */
+#define I2C_SYSTEST_SDA_I       (1 << 1)        /* SDA line sense input value */
+#define I2C_SYSTEST_SDA_O       (1 << 0)        /* SDA line drive output value */
+
+/* These values were copied from omap3, include/asm-arm/arch-omap3/i2c.h. */
+#define OMAP_I2C_STANDARD		100000
+#define OMAP_I2C_FAST_MODE		400000
+#define OMAP_I2C_HIGH_SPEED		3400000
+
+#define SYSTEM_CLOCK_12			12000000
+#define SYSTEM_CLOCK_13			13000000
+#define SYSTEM_CLOCK_192		19200000
+#define SYSTEM_CLOCK_96			96000000
+
+#ifndef I2C_IP_CLK
+#define I2C_IP_CLK			SYSTEM_CLOCK_96
+#endif
+
+#ifndef I2C_INTERNAL_SAMPLING_CLK
+#define I2C_INTERNAL_SAMPLING_CLK	19200000
+#endif
+
+/* These are the trim values for standard and fast speed */
+#ifndef I2C_FASTSPEED_SCLL_TRIM
+#define I2C_FASTSPEED_SCLL_TRIM		6
+#endif
+#ifndef I2C_FASTSPEED_SCLH_TRIM
+#define I2C_FASTSPEED_SCLH_TRIM		6
+#endif
+
+/* These are the trim values for high speed */
+#ifndef I2C_HIGHSPEED_PHASE_ONE_SCLL_TRIM
+#define I2C_HIGHSPEED_PHASE_ONE_SCLL_TRIM	I2C_FASTSPEED_SCLL_TRIM
+#endif
+#ifndef I2C_HIGHSPEED_PHASE_ONE_SCLH_TRIM
+#define I2C_HIGHSPEED_PHASE_ONE_SCLH_TRIM	I2C_FASTSPEED_SCLH_TRIM
+#endif
+#ifndef I2C_HIGHSPEED_PHASE_TWO_SCLL_TRIM
+#define I2C_HIGHSPEED_PHASE_TWO_SCLL_TRIM	I2C_FASTSPEED_SCLL_TRIM
+#endif
+#ifndef I2C_HIGHSPEED_PHASE_TWO_SCLH_TRIM
+#define I2C_HIGHSPEED_PHASE_TWO_SCLH_TRIM	I2C_FASTSPEED_SCLH_TRIM
+#endif
+
+#define I2C_PSC_MAX			0x0f
+#define I2C_PSC_MIN			0x00
+
+
+#endif