Merge branch 'master' of git://git.denx.de/u-boot-arm

* 'master' of git://git.denx.de/u-boot-arm:
  arm, davinci: add DAVINCI_MMC_CLKID
  arm, davinci_emac: fix driver bug if more then 3 PHYs are detected
  arm, davinci: da850/dm365 lowlevel cleanup
  omap5: Add omap5_evm board build support.
  omap4/5: Add support for booting with CH.
  omap5: emif: Add emif/ddr configurations required for omap5 evm
  omap5: clocks: Add clocks support for omap5 platform.
  omap5: Add minimal support for omap5430.
  omap: Checkpatch fixes
  omap4: make omap4 code common for future reuse
  GCC4.6: Squash warnings in onenand_base.c
  GCC4.6: Fix common/usb.c on xscale
  OneNAND: Add simple OneNAND SPL
  PXA: vpac270: Enable the new generic MMC driver
  PXA: Cleanup serial_pxa
  PXA: Drop csb226 and innokom boards (unmaintained)
  m28evk: Fix comment about the number of RAM banks
  mx31: Fix checkpatch warnings in generic.c
  mx31: Use proper IO accessor for GPR register
  mx31: Remove duplicate definition for GPR register
  qong: Use generic function for configuring GPR register
  M28EVK: Enable USB HOST support
  iMX28: Add USB HOST driver
  iMX28: Add USB and USB PHY register definitions
  M28: Add memory detection into SPL
  iMX28: Fix ARM vector handling
  M28: Add doc/README.m28 documentation
  M28: Add MMC SPL
  iMX28: Add support for DENX M28EVK board
  iMX28: Add u-boot.sb target to Makefile
  iMX28: Add image header generator tool
  iMX28: Add driver for internal RTC
  iMX28: Add GPMI NAND driver
  iMX28: Add APBH DMA driver
  iMX28: Add SPI driver
  iMX28: Add GPIO control
  iMX28: Add I2C bus driver
  iMX28: Add PINMUX control
  FEC: Add support for iMX28 quirks
  iMX28: Add SSP MMC driver
  iMX28: Initial support for iMX28 CPU
  MX25: zmx25: GCC4.6 fix build warnings
  da850: add new config file for AM18xx
  BeagleBoard: config: Switch to ttyO2
  OMAP3: Change omap3_evm maintainer
  devkit8000: Fix NAND SPL on boards with 256MB NAND
  integrator: enable Vpp and disable flash protection
  integrator: add system controller header
  integrator: make flash writeable on boot
  integrator: use io-accessors for board init
  integrator: move text offset to config
  integrator: pass configs for core modules
  ARM: remove superfluous setting of arch_number in board specific code.
  SPL: Allow ARM926EJS to avoid compiling in the CPU support code
  integrator: do not test first part of the memory
  arm: a320: fix broken timer
  ARM: define CONFIG_MACH_TYPE for all ronetix boards
  dm646x: pass board revision info to kernel
  dm646x: add new configuration for dm6467T
  arm, davinci: Fix setting of the SDRAM configuration register
  arm, davinci: Remove the duplication of LPSC functions
  arm, davinci: Rename AM1808 lowlevel functions to DA850
  da8xxevm: fix build error
  ARM: re-add MACH_TYPE_XXXXXX for VCMA9 board and add CONFIG_MACH_TYPE

1 files changed, 211 insertions, 0 deletions

diff --git a/arch/arm/include/asm/arch-omap4/omap.h b/arch/arm/include/asm/arch-omap4/omap.h
new file mode 100644
index 0000000000..e9942574f2
--- /dev/null
+++ b/arch/arm/include/asm/arch-omap4/omap.h
@@ -0,0 +1,211 @@
+/*
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * Authors:
+ *	Aneesh V <aneesh@ti.com>
+ *
+ * Derived from OMAP3 work by
+ *	Richard Woodruff <r-woodruff2@ti.com>
+ *	Syed Mohammed Khasim <x0khasim@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _OMAP4_H_
+#define _OMAP4_H_
+
+#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
+#include <asm/types.h>
+#endif /* !(__KERNEL_STRICT_NAMES || __ASSEMBLY__) */
+
+/*
+ * L4 Peripherals - L4 Wakeup and L4 Core now
+ */
+#define OMAP44XX_L4_CORE_BASE	0x4A000000
+#define OMAP44XX_L4_WKUP_BASE	0x4A300000
+#define OMAP44XX_L4_PER_BASE	0x48000000
+
+#define OMAP44XX_DRAM_ADDR_SPACE_START	0x80000000
+#define OMAP44XX_DRAM_ADDR_SPACE_END	0xD0000000
+#define DRAM_ADDR_SPACE_START	OMAP44XX_DRAM_ADDR_SPACE_START
+#define DRAM_ADDR_SPACE_END	OMAP44XX_DRAM_ADDR_SPACE_END
+
+/* CONTROL */
+#define CTRL_BASE		(OMAP44XX_L4_CORE_BASE + 0x2000)
+#define CONTROL_PADCONF_CORE	(OMAP44XX_L4_CORE_BASE + 0x100000)
+#define CONTROL_PADCONF_WKUP	(OMAP44XX_L4_CORE_BASE + 0x31E000)
+
+/* LPDDR2 IO regs */
+#define LPDDR2_IO_REGS_BASE	0x4A100638
+
+/* CONTROL_ID_CODE */
+#define CONTROL_ID_CODE		0x4A002204
+
+#define OMAP4_CONTROL_ID_CODE_ES1_0	0x0B85202F
+#define OMAP4_CONTROL_ID_CODE_ES2_0	0x1B85202F
+#define OMAP4_CONTROL_ID_CODE_ES2_1	0x3B95C02F
+#define OMAP4_CONTROL_ID_CODE_ES2_2	0x4B95C02F
+#define OMAP4_CONTROL_ID_CODE_ES2_3	0x6B95C02F
+
+/* UART */
+#define UART1_BASE		(OMAP44XX_L4_PER_BASE + 0x6a000)
+#define UART2_BASE		(OMAP44XX_L4_PER_BASE + 0x6c000)
+#define UART3_BASE		(OMAP44XX_L4_PER_BASE + 0x20000)
+
+/* General Purpose Timers */
+#define GPT1_BASE		(OMAP44XX_L4_WKUP_BASE + 0x18000)
+#define GPT2_BASE		(OMAP44XX_L4_PER_BASE  + 0x32000)
+#define GPT3_BASE		(OMAP44XX_L4_PER_BASE  + 0x34000)
+
+/* Watchdog Timer2 - MPU watchdog */
+#define WDT2_BASE		(OMAP44XX_L4_WKUP_BASE + 0x14000)
+
+/* 32KTIMER */
+#define SYNC_32KTIMER_BASE	(OMAP44XX_L4_WKUP_BASE + 0x4000)
+
+/* GPMC */
+#define OMAP44XX_GPMC_BASE	0x50000000
+
+/* SYSTEM CONTROL MODULE */
+#define SYSCTRL_GENERAL_CORE_BASE	0x4A002000
+
+/*
+ * Hardware Register Details
+ */
+
+/* Watchdog Timer */
+#define WD_UNLOCK1		0xAAAA
+#define WD_UNLOCK2		0x5555
+
+/* GP Timer */
+#define TCLR_ST			(0x1 << 0)
+#define TCLR_AR			(0x1 << 1)
+#define TCLR_PRE		(0x1 << 5)
+
+/*
+ * PRCM
+ */
+
+/* PRM */
+#define PRM_BASE		0x4A306000
+#define PRM_DEVICE_BASE		(PRM_BASE + 0x1B00)
+
+#define PRM_RSTCTRL		PRM_DEVICE_BASE
+#define PRM_RSTCTRL_RESET	0x01
+
+/* Control Module */
+#define LDOSRAM_ACTMODE_VSET_IN_MASK	(0x1F << 5)
+#define LDOSRAM_VOLT_CTRL_OVERRIDE	0x0401040f
+#define CONTROL_EFUSE_1_OVERRIDE	0x1C4D0110
+#define CONTROL_EFUSE_2_OVERRIDE	0x00084000
+
+/* LPDDR2 IO regs */
+#define CONTROL_LPDDR2IO_SLEW_125PS_DRV8_PULL_DOWN	0x1C1C1C1C
+#define CONTROL_LPDDR2IO_SLEW_325PS_DRV8_GATE_KEEPER	0x9E9E9E9E
+#define CONTROL_LPDDR2IO_SLEW_315PS_DRV12_PULL_DOWN	0x7C7C7C7C
+#define LPDDR2IO_GR10_WD_MASK				(3 << 17)
+#define CONTROL_LPDDR2IO_3_VAL		0xA0888C00
+
+/* CONTROL_EFUSE_2 */
+#define CONTROL_EFUSE_2_NMOS_PMOS_PTV_CODE_1		0x00ffc000
+
+#define MMC1_PWRDNZ					(1 << 26)
+#define MMC1_PBIASLITE_PWRDNZ				(1 << 22)
+#define MMC1_PBIASLITE_VMODE				(1 << 21)
+
+#ifndef __ASSEMBLY__
+
+struct s32ktimer {
+	unsigned char res[0x10];
+	unsigned int s32k_cr;	/* 0x10 */
+};
+
+struct omap4_sys_ctrl_regs {
+	unsigned int pad1[129];
+	unsigned int control_id_code;			/* 0x4A002204 */
+	unsigned int pad11[22];
+	unsigned int control_std_fuse_opp_bgap;		/* 0x4a002260 */
+	unsigned int pad2[47];
+	unsigned int control_ldosram_iva_voltage_ctrl;	/* 0x4A002320 */
+	unsigned int control_ldosram_mpu_voltage_ctrl;	/* 0x4A002324 */
+	unsigned int control_ldosram_core_voltage_ctrl;	/* 0x4A002328 */
+	unsigned int pad3[260277];
+	unsigned int control_pbiaslite;                 /* 0x4A100600 */
+	unsigned int pad4[63];
+	unsigned int control_efuse_1;			/* 0x4A100700 */
+	unsigned int control_efuse_2;			/* 0x4A100704 */
+};
+
+struct control_lpddr2io_regs {
+	unsigned int control_lpddr2io1_0;
+	unsigned int control_lpddr2io1_1;
+	unsigned int control_lpddr2io1_2;
+	unsigned int control_lpddr2io1_3;
+	unsigned int control_lpddr2io2_0;
+	unsigned int control_lpddr2io2_1;
+	unsigned int control_lpddr2io2_2;
+	unsigned int control_lpddr2io2_3;
+};
+#endif /* __ASSEMBLY__ */
+
+/*
+ * Non-secure SRAM Addresses
+ * Non-secure RAM starts at 0x40300000 for GP devices. But we keep SRAM_BASE
+ * at 0x40304000(EMU base) so that our code works for both EMU and GP
+ */
+#define NON_SECURE_SRAM_START	0x40304000
+#define NON_SECURE_SRAM_END	0x4030E000	/* Not inclusive */
+/* base address for indirect vectors (internal boot mode) */
+#define SRAM_ROM_VECT_BASE	0x4030D000
+/* Temporary SRAM stack used while low level init is done */
+#define LOW_LEVEL_SRAM_STACK		NON_SECURE_SRAM_END
+#define SRAM_SCRATCH_SPACE_ADDR		NON_SECURE_SRAM_START
+/* SRAM scratch space entries */
+#define OMAP4_SRAM_SCRATCH_OMAP4_REV	SRAM_SCRATCH_SPACE_ADDR
+#define OMAP4_SRAM_SCRATCH_EMIF_SIZE	(SRAM_SCRATCH_SPACE_ADDR + 0x4)
+#define OMAP4_SRAM_SCRATCH_EMIF_T_NUM	(SRAM_SCRATCH_SPACE_ADDR + 0xC)
+#define OMAP4_SRAM_SCRATCH_EMIF_T_DEN	(SRAM_SCRATCH_SPACE_ADDR + 0x10)
+#define OMAP4_SRAM_SCRATCH_SPACE_END	(SRAM_SCRATCH_SPACE_ADDR + 0x14)
+
+/* ROM code defines */
+/* Boot device */
+#define BOOT_DEVICE_MASK	0xFF
+#define BOOT_DEVICE_OFFSET	0x8
+#define DEV_DESC_PTR_OFFSET	0x4
+#define DEV_DATA_PTR_OFFSET	0x18
+#define BOOT_MODE_OFFSET	0x8
+#define RESET_REASON_OFFSET	0x9
+#define CH_FLAGS_OFFSET		0xA
+
+#define CH_FLAGS_CHSETTINGS	(0x1 << 0)
+#define CH_FLAGS_CHRAM		(0x1 << 1)
+#define CH_FLAGS_CHFLASH	(0x1 << 2)
+#define CH_FLAGS_CHMMCSD	(0x1 << 3)
+
+#ifndef __ASSEMBLY__
+struct omap_boot_parameters {
+	char *boot_message;
+	unsigned int mem_boot_descriptor;
+	unsigned char omap_bootdevice;
+	unsigned char reset_reason;
+	unsigned char ch_flags;
+};
+#endif
+#endif