diff options
| author | Toshifumi NISHINAGA <tnishinaga.dev@gmail.com> | 2016-07-08 01:02:26 +0900 |
|---|---|---|
| committer | Tom Rini <trini@konsulko.com> | 2016-07-14 18:22:44 -0400 |
| commit | 4b2fd720a7b2f78c42d1565edf4c67f378c65440 (patch) | |
| tree | 97c496a53008f138475a3991ac4c0ed3920ce26e /arch/arm/include/asm/arch-stm32f7/stm32_periph.h | |
| parent | 25c1b1353ce4b8188de6058f9f3b0d5d2dad8230 (diff) | |
stm32: Change USART port to USART6 for stm32f746 discovery board
This change is to remove a halt at about 200KiB
while sending a large(1MiB) binary to a micro controller using USART1.
USART1 is connected to a PC via an on-board ST-Link debugger
that also functions as a USB-Serial converter.
However, it seems to loss some data occasionally.
So I changed the serial port to USART6 and connected it to the PC using
an FTDI USB-Serial cable, therefore the transmission was successfully
completed.
Signed-off-by: Toshifumi NISHINAGA <tnishinaga.dev@gmail.com>
Diffstat (limited to 'arch/arm/include/asm/arch-stm32f7/stm32_periph.h')
| -rw-r--r-- | arch/arm/include/asm/arch-stm32f7/stm32_periph.h | 2 |
1 files changed, 2 insertions, 0 deletions
diff --git a/arch/arm/include/asm/arch-stm32f7/stm32_periph.h b/arch/arm/include/asm/arch-stm32f7/stm32_periph.h index 38adc4e0e2..0bd4695727 100644 --- a/arch/arm/include/asm/arch-stm32f7/stm32_periph.h +++ b/arch/arm/include/asm/arch-stm32f7/stm32_periph.h @@ -17,11 +17,13 @@ enum periph_id { UART1_GPIOA_9_10 = 0, UART2_GPIOD_5_6, + UART6_GPIOC_6_7, }; enum periph_clock { USART1_CLOCK_CFG = 0, USART2_CLOCK_CFG, + USART6_CLOCK_CFG, GPIO_A_CLOCK_CFG, GPIO_B_CLOCK_CFG, GPIO_C_CLOCK_CFG, |