diff options
| author | Jimmy Zhang <jimmzhang@nvidia.com> | 2014-01-24 10:37:36 -0700 |
|---|---|---|
| committer | Tom Warren <twarren@nvidia.com> | 2014-02-03 09:46:45 -0700 |
| commit | b9dd6215ce280a460ff182f51e80b7f4bf8b019a (patch) | |
| tree | b8d28f6e2c5fb42f858fdcdf64bf906315af678f /arch/arm/include/asm/arch-tegra/clk_rst.h | |
| parent | 9399e540ca5b984582cddb1936ec44bf2756f8a1 (diff) | |
ARM: tegra: don't exceed AVP limits when configuring PLLP
Based on the Tegra TRM, the system clock (which is the AVP clock) can
run up to 275MHz. On power on, the default sytem clock source is set to
PLLP_OUT0. In function clock_early_init(), PLLP_OUT0 will be set to
408MHz which is beyond system clock's upper limit.
The fix is to set the system clock to CLK_M before initializing PLLP,
and then switch back to PLLP_OUT4, which has an appropriate divider
configured, after PLLP has been configured
Implement this logic in new function tegra30_set_up_pllp(),
which sets up PLLP and all PLLP_OUT* dividers, and handles the AVP
clock switching. Remove the duplicate PLLP setup from pllx_set_rate()
and adjust_pllp_out_freqs().
Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com>
[swarren, significantly refactored the change]
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Tested-by: Thierry Reding <treding@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
Diffstat (limited to 'arch/arm/include/asm/arch-tegra/clk_rst.h')
| -rw-r--r-- | arch/arm/include/asm/arch-tegra/clk_rst.h | 16 |
1 files changed, 15 insertions, 1 deletions
diff --git a/arch/arm/include/asm/arch-tegra/clk_rst.h b/arch/arm/include/asm/arch-tegra/clk_rst.h index f07b83d26a..021cfcc3c6 100644 --- a/arch/arm/include/asm/arch-tegra/clk_rst.h +++ b/arch/arm/include/asm/arch-tegra/clk_rst.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2010,2011 + * (C) Copyright 2010-2014 * NVIDIA Corporation <www.nvidia.com> * * SPDX-License-Identifier: GPL-2.0+ @@ -209,6 +209,20 @@ enum { IN_408_OUT_9_6_DIVISOR = 83, }; +#define PLLP_OUT1_RSTN_DIS (1 << 0) +#define PLLP_OUT1_RSTN_EN (0 << 0) +#define PLLP_OUT1_CLKEN (1 << 1) +#define PLLP_OUT2_RSTN_DIS (1 << 16) +#define PLLP_OUT2_RSTN_EN (0 << 16) +#define PLLP_OUT2_CLKEN (1 << 17) + +#define PLLP_OUT3_RSTN_DIS (1 << 0) +#define PLLP_OUT3_RSTN_EN (0 << 0) +#define PLLP_OUT3_CLKEN (1 << 1) +#define PLLP_OUT4_RSTN_DIS (1 << 16) +#define PLLP_OUT4_RSTN_EN (0 << 16) +#define PLLP_OUT4_CLKEN (1 << 17) + /* CLK_RST_CONTROLLER_UTMIP_PLL_CFG1_0 */ #define PLLU_POWERDOWN (1 << 16) #define PLL_ENABLE_POWERDOWN (1 << 14) |