diff options
| author | Peng Fan <Peng.Fan@freescale.com> | 2014-11-10 08:50:41 +0800 |
|---|---|---|
| committer | Marek Vasut <marex@denx.de> | 2014-11-14 20:56:58 +0100 |
| commit | 3b9c1a5dc09e5ee773f5a4fe9280e568b64b7779 (patch) | |
| tree | 5cb0405f797d081b6d0ba54ed142f6e9e7d55b18 /arch/arm/include/asm | |
| parent | 229dbba9b1a24d8f371f18fa8ff13a4cca864f06 (diff) | |
imx:mx6slevk add board level support for usb
Add pinmux settings, implement board_ehci_hcd_init, board_usb_phy_mode
There are two usb port on mx6slevk board:
1. otg port
2. host port
The following are the connection between usb controller and board usb
interface, host port has not ID pin set:
otg1 core <---> board otg port
otg2 core <---> board host port
In order to make host port work, board_usb_phy_mode return USB_INIT_HOST
to let host port work in host mode.
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Signed-off-by: Ye Li <B37916@freescale.com>
Diffstat (limited to 'arch/arm/include/asm')
| -rw-r--r-- | arch/arm/include/asm/arch-mx6/mx6sl_pins.h | 5 |
1 files changed, 5 insertions, 0 deletions
diff --git a/arch/arm/include/asm/arch-mx6/mx6sl_pins.h b/arch/arm/include/asm/arch-mx6/mx6sl_pins.h index d9db58c9a3..9ded3d851c 100644 --- a/arch/arm/include/asm/arch-mx6/mx6sl_pins.h +++ b/arch/arm/include/asm/arch-mx6/mx6sl_pins.h @@ -53,5 +53,10 @@ enum { MX6_PAD_FEC_REF_CLK__FEC_REF_OUT = IOMUX_PAD(0x424, 0x134, 0x10, 0x000, 0, 0), MX6_PAD_FEC_RX_ER__GPIO_4_19 = IOMUX_PAD(0x0428, 0x0138, 5, 0x0000, 0, 0), MX6_PAD_FEC_TX_CLK__GPIO_4_21 = IOMUX_PAD(0x0434, 0x0144, 5, 0x0000, 0, 0), + + MX6_PAD_EPDC_PWRCOM__ANATOP_USBOTG1_ID = IOMUX_PAD(0x03D0, 0x00E0, 4, 0x05DC, 0, 0), + + MX6_PAD_KEY_COL4__USB_USBOTG1_PWR = IOMUX_PAD(0x0484, 0x017C, 6, 0x0000, 0, 0), + MX6_PAD_KEY_COL5__USB_USBOTG2_PWR = IOMUX_PAD(0x0488, 0x0180, 6, 0x0000, 0, 0), }; #endif /* __ASM_ARCH_MX6_MX6SL_PINS_H__ */ |