ARM: AM43xx: EPOS_EVM: Add support for LPDDR2

AM4372 EPOS EVM has 1GB LPDDR2(Part no: MT42L256M32D2LG-25 WT:A)
Adding LPDDR2 init sequence and register details for the same.
Below is the brief description of LPDDR2 init sequence:
-> Configure VTP
-> Configure DDR IO settings
-> Disable initialization and refreshes until EMIF registers are programmed.
-> Program Timing registers
-> Program PHY control and Temp alert and ZQ config registers.
-> Enable initialization and refreshes and configure SDRAM CONFIG register
-> Wait till initialization is complete and the configure MR registers.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>

5 files changed, 52 insertions, 2 deletions

diff --git a/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h b/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h
index 02ed5957e9..4c9352a2ed 100644
--- a/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h
+++ b/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h
@@ -28,6 +28,9 @@
 #define UART_CLK_RUNNING_MASK	0x1
 #define UART_SMART_IDLE_EN	(0x1 << 0x3)
 
+#define CM_DLL_CTRL_NO_OVERRIDE	0x0
+#define CM_DLL_READYST		0x4
+
 extern void enable_dmm_clocks(void);
 extern const struct dpll_params dpll_core_opp100;
 extern struct dpll_params dpll_mpu_opp100;
diff --git a/arch/arm/include/asm/arch-am33xx/cpu.h b/arch/arm/include/asm/arch-am33xx/cpu.h
index 3ee37dc4e7..9febfa2719 100644
--- a/arch/arm/include/asm/arch-am33xx/cpu.h
+++ b/arch/arm/include/asm/arch-am33xx/cpu.h
@@ -401,6 +401,11 @@ struct cm_perpll {
 	unsigned int cpgmac0clkctrl;	/* offset 0xB20 */
 };
 
+struct cm_device_inst {
+	unsigned int cm_clkout1_ctrl;
+	unsigned int cm_dll_ctrl;
+};
+
 struct cm_dpll {
 	unsigned int resv1;
 	unsigned int clktimer2clk;	/* offset 0x04 */
diff --git a/arch/arm/include/asm/arch-am33xx/ddr_defs.h b/arch/arm/include/asm/arch-am33xx/ddr_defs.h
index 2278358ab2..6af4b84e56 100644
--- a/arch/arm/include/asm/arch-am33xx/ddr_defs.h
+++ b/arch/arm/include/asm/arch-am33xx/ddr_defs.h
@@ -18,7 +18,11 @@
 #define VTP_CTRL_READY		(0x1 << 5)
 #define VTP_CTRL_ENABLE		(0x1 << 6)
 #define VTP_CTRL_START_EN	(0x1)
+#ifdef CONFIG_AM43XX
+#define DDR_CKE_CTRL_NORMAL	0x3
+#else
 #define DDR_CKE_CTRL_NORMAL	0x1
+#endif
 #define PHY_EN_DYN_PWRDN	(0x1 << 20)
 
 /* Micron MT47H128M16RT-25E */
@@ -124,6 +128,14 @@
 #define K4B2G1646EBIH9_PHY_WR_DATA		0x76
 #define K4B2G1646EBIH9_IOCTRL_VALUE		0x18B
 
+#define  LPDDR2_ADDRCTRL_IOCTRL_VALUE   0x294
+#define  LPDDR2_ADDRCTRL_WD0_IOCTRL_VALUE 0x00000000
+#define  LPDDR2_ADDRCTRL_WD1_IOCTRL_VALUE 0x00000000
+#define  LPDDR2_DATA0_IOCTRL_VALUE   0x20000294
+#define  LPDDR2_DATA1_IOCTRL_VALUE   0x20000294
+#define  LPDDR2_DATA2_IOCTRL_VALUE   0x20000294
+#define  LPDDR2_DATA3_IOCTRL_VALUE   0x20000294
+
 /**
  * Configure DMM
  */
@@ -133,6 +145,7 @@ void config_dmm(const struct dmm_lisa_map_regs *regs);
  * Configure SDRAM
  */
 void config_sdram(const struct emif_regs *regs, int nr);
+void config_sdram_emif4d5(const struct emif_regs *regs, int nr);
 
 /**
  * Set SDRAM timings
@@ -278,12 +291,27 @@ struct ddr_cmdtctrl {
 	unsigned int resv2[12];
 	unsigned int dt0ioctl;
 	unsigned int dt1ioctl;
+	unsigned int dt2ioctrl;
+	unsigned int dt3ioctrl;
+	unsigned int resv3[4];
+	unsigned int emif_sdram_config_ext;
+};
+
+struct ctrl_ioregs {
+	unsigned int cm0ioctl;
+	unsigned int cm1ioctl;
+	unsigned int cm2ioctl;
+	unsigned int dt0ioctl;
+	unsigned int dt1ioctl;
+	unsigned int dt2ioctrl;
+	unsigned int dt3ioctrl;
+	unsigned int emif_sdram_config_ext;
 };
 
 /**
  * Configure DDR io control registers
  */
-void config_io_ctrl(unsigned long val);
+void config_io_ctrl(const struct ctrl_ioregs *ioregs);
 
 struct ddr_ctrl {
 	unsigned int ddrioctrl;
@@ -291,8 +319,9 @@ struct ddr_ctrl {
 	unsigned int ddrckectrl;
 };
 
-void config_ddr(unsigned int pll, unsigned int ioctrl,
+void config_ddr(unsigned int pll, const struct ctrl_ioregs *ioregs,
 		const struct ddr_data *data, const struct cmd_control *ctrl,
 		const struct emif_regs *regs, int nr);
+void emif_get_ext_phy_ctrl_const_regs(const u32 **regs, u32 *size);
 
 #endif  /* _DDR_DEFS_H */
diff --git a/arch/arm/include/asm/arch-am33xx/hardware_am43xx.h b/arch/arm/include/asm/arch-am33xx/hardware_am43xx.h
index 468521bf34..15399dcc74 100644
--- a/arch/arm/include/asm/arch-am33xx/hardware_am43xx.h
+++ b/arch/arm/include/asm/arch-am33xx/hardware_am43xx.h
@@ -62,6 +62,7 @@
 #define PRM_PER_USBPHYOCP2SCP0_CLKCTRL (CM_PER + 0x5b8)
 #define PRM_PER_USBPHYOCP2SCP1_CLKCTRL (CM_PER + 0x5c0)
 #define USBPHYOCPSCP_MODULE_EN	(1 << 1)
+#define CM_DEVICE_INST			0x44df4100
 
 /* Control status register */
 #define CTRL_CRYSTAL_FREQ_SRC_MASK		(1 << 31)
diff --git a/arch/arm/include/asm/emif.h b/arch/arm/include/asm/emif.h
index d9d521a515..e68c113e28 100644
--- a/arch/arm/include/asm/emif.h
+++ b/arch/arm/include/asm/emif.h
@@ -14,11 +14,15 @@
 #define _EMIF_H_
 #include <asm/types.h>
 #include <common.h>
+#include <asm/io.h>
 
 /* Base address */
 #define EMIF1_BASE				0x4c000000
 #define EMIF2_BASE				0x4d000000
 
+#define EMIF_4D					0x4
+#define EMIF_4D5				0x5
+
 /* Registers shifts, masks and values */
 
 /* EMIF_MOD_ID_REV */
@@ -1148,6 +1152,14 @@ struct read_write_regs {
 	u32 write_reg;
 };
 
+static inline u32 get_emif_rev(u32 base)
+{
+	struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
+
+	return (readl(&emif->emif_mod_id_rev) & EMIF_REG_MAJOR_REVISION_MASK)
+		>> EMIF_REG_MAJOR_REVISION_SHIFT;
+}
+
 /* assert macros */
 #if defined(DEBUG)
 #define emif_assert(c)	({ if (!(c)) for (;;); })