Merge branch 'master' of git://git.denx.de/u-boot-arm

11 files changed, 63 insertions, 347 deletions

diff --git a/arch/arm/include/asm/arch-at91/at91_shdwn.h b/arch/arm/include/asm/arch-at91/at91_shdwn.h
new file mode 100644
index 0000000000..874f988700
--- /dev/null
+++ b/arch/arm/include/asm/arch-at91/at91_shdwn.h
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2010
+ * Reinhard Meyer, reinhard.meyer@emk-elektronik.de
+ *
+ * Shutdown Controller
+ * Based on AT91SAM9XE datasheet
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_SHDWN_H
+#define AT91_SHDWN_H
+
+#ifndef __ASSEMBLY__
+
+struct at91_shdwn {
+	u32	cr;	/* Control Rer.    WO */
+	u32	mr;	/* Mode Register   RW 0x00000003 */
+	u32	sr;	/* Status Register RO 0x00000000 */
+};
+
+#endif /* __ASSEMBLY__ */
+
+#define AT91_SHDW_CR_KEY	0xa5000000
+#define AT91_SHDW_CR_SHDW	0x00000001
+
+#define AT91_SHDW_MR_RTTWKEN	0x00010000
+#define AT91_SHDW_MR_CPTWK0	0x000000f0
+#define AT91_SHDW_MR_WKMODE0H2L	0x00000002
+#define AT91_SHDW_MR_WKMODE0L2H	0x00000001
+
+#define AT91_SHDW_SR_RTTWK	0x00010000
+#define AT91_SHDW_SR_WAKEUP0	0x00000001
+
+#endif
diff --git a/arch/arm/include/asm/arch-at91/at91sam9260.h b/arch/arm/include/asm/arch-at91/at91sam9260.h
index cb34a94a3b..7fd60b74ff 100644
--- a/arch/arm/include/asm/arch-at91/at91sam9260.h
+++ b/arch/arm/include/asm/arch-at91/at91sam9260.h
@@ -56,6 +56,7 @@
 #define AT91_PIO_BASE		0xfffff400
 #define AT91_PMC_BASE		0xfffffc00
 #define AT91_RSTC_BASE		0xfffffd00
+#define AT91_SHDWN_BASE		0xfffffd10
 #define AT91_RTT_BASE		0xfffffd20
 #define AT91_PIT_BASE		0xfffffd30
 #define AT91_WDT_BASE		0xfffffd40
diff --git a/arch/arm/include/asm/arch-at91/hardware.h b/arch/arm/include/asm/arch-at91/hardware.h
index f5f80e0b1b..6b44d61207 100644
--- a/arch/arm/include/asm/arch-at91/hardware.h
+++ b/arch/arm/include/asm/arch-at91/hardware.h
@@ -23,6 +23,7 @@
 #include <asm/arch/at91sam9260.h>
 #define AT91_BASE_MCI	AT91SAM9260_BASE_MCI
 #define AT91_BASE_SPI	AT91SAM9260_BASE_SPI0
+#define AT91_BASE_SPI1	AT91SAM9260_BASE_SPI1
 #define AT91_ID_UHP	AT91SAM9260_ID_UHP
 #define AT91_PMC_UHP	AT91SAM926x_PMC_UHP
 #elif defined(CONFIG_AT91SAM9261) || defined(CONFIG_AT91SAM9G10)
diff --git a/arch/arm/include/asm/arch-at91/memory-map.h b/arch/arm/include/asm/arch-at91/memory-map.h
index f605f37fd2..d489fa2157 100644
--- a/arch/arm/include/asm/arch-at91/memory-map.h
+++ b/arch/arm/include/asm/arch-at91/memory-map.h
@@ -31,5 +31,6 @@
 #define USART2_BASE AT91_USART2
 #define USART3_BASE (AT91_BASE_SYS + AT91_DBGU)
 #define SPI0_BASE	AT91_BASE_SPI
+#define SPI1_BASE	AT91_BASE_SPI1
 
 #endif /* __ASM_ARM_ARCH_MEMORYMAP_H__ */
diff --git a/arch/arm/include/asm/arch-mx25/imx-regs.h b/arch/arm/include/asm/arch-mx25/imx-regs.h
index f709bd8e0e..f5a2929e22 100644
--- a/arch/arm/include/asm/arch-mx25/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx25/imx-regs.h
@@ -108,11 +108,11 @@ struct gpt_regs {
 
 /* Watchdog Timer (WDOG) registers */
 struct wdog_regs {
-	u32 wcr;	/* Control */
-	u32 wsr;	/* Service */
-	u32 wrsr;	/* Reset Status */
-	u32 wicr;	/* Interrupt Control */
-	u32 wmcr;	/* Misc Control */
+	u16 wcr;	/* Control */
+	u16 wsr;	/* Service */
+	u16 wrsr;	/* Reset Status */
+	u16 wicr;	/* Interrupt Control */
+	u16 wmcr;	/* Misc Control */
 };
 
 /* IIM control registers */
@@ -308,7 +308,9 @@ struct iim_regs {
 #define GPT_CTRL_TEN		1		/* Timer enable	*/
 
 /* WDOG enable */
-#define WCR_WDE 0x04
+#define WCR_WDE 		0x04
+#define WSR_UNLOCK1		0x5555
+#define WSR_UNLOCK2		0xAAAA
 
 /* FUSE bank offsets */
 #define IIM0_MAC		0x1a
diff --git a/arch/arm/include/asm/arch-mx5/crm_regs.h b/arch/arm/include/asm/arch-mx5/crm_regs.h
index 14aa231a5b..4ed8eb31c8 100644
--- a/arch/arm/include/asm/arch-mx5/crm_regs.h
+++ b/arch/arm/include/asm/arch-mx5/crm_regs.h
@@ -189,4 +189,15 @@ struct mxc_ccm_reg {
 #define MXC_CCM_CSCDR1_UART_CLK_PODF_OFFSET		0
 #define MXC_CCM_CSCDR1_UART_CLK_PODF_MASK		0x7
 
+/* Define the bits in register CCDR */
+#define MXC_CCM_CCDR_IPU_HS_MASK			(0x1 << 17)
+
+/* Define the bits in register CCGRx */
+#define MXC_CCM_CCGR_CG_MASK				0x3
+
+#define MXC_CCM_CCGR5_CG5_OFFSET			10
+
+/* Define the bits in register CLPCR */
+#define MXC_CCM_CLPCR_BYPASS_IPU_LPM_HS                 (0x1 << 18)
+
 #endif				/* __ARCH_ARM_MACH_MX51_CRM_REGS_H__ */
diff --git a/arch/arm/include/asm/arch-mx5/imx-regs.h b/arch/arm/include/asm/arch-mx5/imx-regs.h
index 3ddda401f3..0b6249a9b8 100644
--- a/arch/arm/include/asm/arch-mx5/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx5/imx-regs.h
@@ -26,7 +26,8 @@
 /*
  * IRAM
  */
-#define IRAM_BASE_ADDR		0x1FFE8000	/* internal ram */
+#define IRAM_BASE_ADDR		0x1FFE0000	/* internal ram */
+#define IRAM_SIZE		0x00020000	/* 128 KB */
 /*
  * Graphics Memory of GPU
  */
diff --git a/arch/arm/include/asm/arch-pxa/macro.h b/arch/arm/include/asm/arch-pxa/macro.h
deleted file mode 100644
index 85958dd32d..0000000000
--- a/arch/arm/include/asm/arch-pxa/macro.h
+++ /dev/null
@@ -1,328 +0,0 @@
-/*
- * arch/arm/include/asm/arch-pxa/macro.h
- *
- * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __ASM_ARCH_PXA_MACRO_H__
-#define __ASM_ARCH_PXA_MACRO_H__
-#ifdef __ASSEMBLY__
-
-#include <asm/macro.h>
-#include <asm/arch/pxa-regs.h>
-
-/*
- * This macro performs a 32bit write to a memory location and makes sure the
- * write operation really happened by performing a read back.
- *
- * Clobbered regs: r4, r5
- */
-.macro	write32rb addr, data
-	ldr	r4, =\addr
-	ldr	r5, =\data
-	str	r5, [r4]
-	ldr	r5, [r4]
-.endm
-
-/*
- * This macro waits according to OSCR incrementation
- *
- * Clobbered regs: r4, r5, r6
- */
-.macro	pxa_wait_ticks ticks
-	ldr	r4, =OSCR
-	mov	r5, #0
-	str	r5, [r4]
-	ldr	r5, =\ticks
-1:
-	ldr	r6, [r4]
-	cmp	r5, r6
-	bgt	1b
-.endm
-
-/*
- * This macro sets up the GPIO pins of the PXA2xx/PXA3xx CPU
- *
- * Clobbered regs: r4, r5
- */
-.macro	pxa_gpio_setup
-	write32	GPSR0, CONFIG_SYS_GPSR0_VAL
-	write32	GPSR1, CONFIG_SYS_GPSR1_VAL
-	write32	GPSR2, CONFIG_SYS_GPSR2_VAL
-#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS)
-	write32	GPSR3, CONFIG_SYS_GPSR3_VAL
-#endif
-
-	write32	GPCR0, CONFIG_SYS_GPCR0_VAL
-	write32	GPCR1, CONFIG_SYS_GPCR1_VAL
-	write32	GPCR2, CONFIG_SYS_GPCR2_VAL
-#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS)
-	write32	GPCR3, CONFIG_SYS_GPCR3_VAL
-#endif
-
-	write32	GPDR0, CONFIG_SYS_GPDR0_VAL
-	write32	GPDR1, CONFIG_SYS_GPDR1_VAL
-	write32	GPDR2, CONFIG_SYS_GPDR2_VAL
-#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS)
-	write32	GPDR3, CONFIG_SYS_GPDR3_VAL
-#endif
-
-	write32	GAFR0_L, CONFIG_SYS_GAFR0_L_VAL
-	write32	GAFR0_U, CONFIG_SYS_GAFR0_U_VAL
-	write32	GAFR1_L, CONFIG_SYS_GAFR1_L_VAL
-	write32	GAFR1_U, CONFIG_SYS_GAFR1_U_VAL
-	write32	GAFR2_L, CONFIG_SYS_GAFR2_L_VAL
-	write32	GAFR2_U, CONFIG_SYS_GAFR2_U_VAL
-#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS)
-	write32	GAFR3_L, CONFIG_SYS_GAFR3_L_VAL
-	write32	GAFR3_U, CONFIG_SYS_GAFR3_U_VAL
-#endif
-
-	write32	PSSR, CONFIG_SYS_PSSR_VAL
-.endm
-
-/*
- * This macro sets up the Memory controller of the PXA2xx CPU
- *
- * WARNING: This macro uses internally r3 and r7 regs for MEMC_BASE
- *          and CONFIG_SYS_MDREFR_VAL correspondingly. Please do not
- *          use this regs for other purpose inside this macro.
- *
- * Clobbered regs: r3, r4, r5, r6, r7
- */
-.macro	pxa_mem_setup
-	/* This comes handy when setting MDREFR */
-	ldr	r3, =MEMC_BASE
-
-	/*
-	 * 1) Initialize Asynchronous static memory controller
-	 */
-
-	/* MSC0: nCS(0,1) */
-	write32rb	(MEMC_BASE + MSC0_OFFSET), CONFIG_SYS_MSC0_VAL
-	/* MSC1: nCS(2,3) */
-	write32rb	(MEMC_BASE + MSC1_OFFSET), CONFIG_SYS_MSC1_VAL
-	/* MSC2: nCS(4,5) */
-	write32rb	(MEMC_BASE + MSC2_OFFSET), CONFIG_SYS_MSC2_VAL
-
-	/*
-	 * 2) Initialize Card Interface
-	 */
-
-	/* MECR: Memory Expansion Card Register */
-	write32rb	(MEMC_BASE + MECR_OFFSET), CONFIG_SYS_MECR_VAL
-	/* MCMEM0: Card Interface slot 0 timing */
-	write32rb	(MEMC_BASE + MCMEM0_OFFSET), CONFIG_SYS_MCMEM0_VAL
-	/* MCMEM1: Card Interface slot 1 timing */
-	write32rb	(MEMC_BASE + MCMEM1_OFFSET), CONFIG_SYS_MCMEM1_VAL
-	/* MCATT0: Card Interface Attribute Space Timing, slot 0 */
-	write32rb	(MEMC_BASE + MCATT0_OFFSET), CONFIG_SYS_MCATT0_VAL
-	/* MCATT1: Card Interface Attribute Space Timing, slot 1 */
-	write32rb	(MEMC_BASE + MCATT1_OFFSET), CONFIG_SYS_MCATT1_VAL
-	/* MCIO0: Card Interface I/O Space Timing, slot 0 */
-	write32rb	(MEMC_BASE + MCIO0_OFFSET), CONFIG_SYS_MCIO0_VAL
-	/* MCIO1: Card Interface I/O Space Timing, slot 1 */
-	write32rb	(MEMC_BASE + MCIO1_OFFSET), CONFIG_SYS_MCIO1_VAL
-
-	/*
-	 * 3) Configure Fly-By DMA register
-	 */
-
-	write32rb	(MEMC_BASE + FLYCNFG_OFFSET), CONFIG_SYS_FLYCNFG_VAL
-
-	/*
-	 * 4) Initialize Timing for Sync Memory (SDCLK0)
-	 */
-
-	/*
-	 * Before accessing MDREFR we need a valid DRI field, so we set
-	 * this to power on defaults + DRI field.
-	 */
-	ldr	r5, [r3, #MDREFR_OFFSET]
-	bic	r5, r5, #0x0ff
-	bic	r5, r5, #0xf00	/* MDREFR user config with zeroed DRI */
-
-	ldr	r4, =CONFIG_SYS_MDREFR_VAL
-	mov	r7, r4
-	lsl	r4, #20
-	lsr	r4, #20		/* Get a valid DRI field */
-
-	orr	r5, r5, r4	/* MDREFR user config with correct DRI */
-
-	orr	r5, #MDREFR_K0RUN
-	orr	r5, #MDREFR_SLFRSH
-	bic	r5, #MDREFR_APD
-	bic	r5, #MDREFR_E1PIN
-
-	str	r5, [r3, #MDREFR_OFFSET]
-	ldr	r4, [r3, #MDREFR_OFFSET]
-
-	/*
-	 * 5) Initialize Synchronous Static Memory (Flash/Peripherals)
-	 */
-
-	/* Initialize SXCNFG register. Assert the enable bits.
-	 *
-	 * Write SXMRS to cause an MRS command to all enabled banks of
-	 * synchronous static memory. Note that SXLCR need not be written
-	 * at this time.
-	 */
-	write32rb	(MEMC_BASE + SXCNFG_OFFSET), CONFIG_SYS_SXCNFG_VAL
-
-	/*
-	 * 6) Initialize SDRAM
-	 */
-
-	bic	r7, #MDREFR_SLFRSH
-	str	r7, [r3, #MDREFR_OFFSET]
-	ldr	r4, [r3, #MDREFR_OFFSET]
-
-	orr	r7, #MDREFR_E1PIN
-	str	r7, [r3, #MDREFR_OFFSET]
-	ldr	r4, [r3, #MDREFR_OFFSET]
-
-	/*
-	 * 7) Write MDCNFG with MDCNFG:DEx deasserted (set to 0), to configure
-	 *    but not enable each SDRAM partition pair.
-	 */
-
-	/* Fetch platform value of MDCNFG */
-	ldr	r4, =CONFIG_SYS_MDCNFG_VAL
-	/* Disable all sdram banks */
-	bic	r4, r4, #(MDCNFG_DE0|MDCNFG_DE1)
-	bic	r4, r4, #(MDCNFG_DE2|MDCNFG_DE3)
-	/* Write initial value of MDCNFG, w/o enabling sdram banks */
-	str	r4, [r3, #MDCNFG_OFFSET]
-	ldr	r4, [r3, #MDCNFG_OFFSET]
-
-	/* Wait for the clock to the SDRAMs to stabilize, 100..200 usec. */
-	pxa_wait_ticks	0x300
-
-	/*
-	 * 8) Trigger a number (usually 8) refresh cycles by attempting
-	 *    non-burst read or write accesses to disabled SDRAM, as commonly
-	 *    specified in the power up sequence documented in SDRAM data
-	 *    sheets. The address(es) used for this purpose must not be
-	 *    cacheable.
-	 */
-
-	ldr	r4, =CONFIG_SYS_DRAM_BASE
-.rept 9
-	str	r5, [r4]
-.endr
-
-	/*
-	 * 9) Write MDCNFG with enable bits asserted (MDCNFG:DEx set to 1).
-	 */
-
-	ldr	r5, =CONFIG_SYS_MDCNFG_VAL
-	ldr	r4, =(MDCNFG_DE0 | MDCNFG_DE1 | MDCNFG_DE2 | MDCNFG_DE3)
-	and	r5, r5, r4
-	ldr     r4, [r3, #MDCNFG_OFFSET]
-	orr	r4, r4, r5
-	str     r4, [r3, #MDCNFG_OFFSET]
-	ldr     r4, [r3, #MDCNFG_OFFSET]
-
-	/*
-	 * 10) Write MDMRS.
-	 */
-
-	ldr     r4, =CONFIG_SYS_MDMRS_VAL
-	str     r4, [r3, #MDMRS_OFFSET]
-	ldr     r4, [r3, #MDMRS_OFFSET]
-
-	/*
-	 * 11) Enable APD
-	 */
-
-	ldr	r4, [r3, #MDREFR_OFFSET]
-	and	r7, r7, #MDREFR_APD
-	orr	r4, r4, r7
-	str	r4, [r3, #MDREFR_OFFSET]
-	ldr	r4, [r3, #MDREFR_OFFSET]
-.endm
-
-/*
- * This macro tests if the CPU woke up from sleep and eventually resumes
- *
- * Clobbered regs: r4, r5
- */
-.macro	pxa_wakeup
-	ldr	r4, =RCSR
-	ldr	r5, [r4]
-	and	r5, r5, #(RCSR_GPR | RCSR_SMR | RCSR_WDR | RCSR_HWR)
-	str	r5, [r4]
-	teq	r5, #RCSR_SMR
-
-	bne	pxa_wakeup_exit
-
-	ldr	r4, =PSSR
-	mov	r5, #PSSR_PH
-	str	r5, [r4]
-
-	ldr	r4, =PSPR
-	ldr	pc, [r4]
-pxa_wakeup_exit:
-.endm
-
-/*
- * This macro disables all interupts on PXA2xx/PXA3xx CPU
- *
- * Clobbered regs: r4, r5
- */
-.macro	pxa_intr_setup
-	write32	ICLR, 0
-	write32	ICMR, 0
-#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS)
-	write32	ICLR2, 0
-	write32	ICMR2, 0
-#endif
-.endm
-
-/*
- * This macro configures clock on PXA2xx/PXA3xx CPU
- *
- * Clobbered regs: r4, r5
- */
-.macro	pxa_clock_setup
-	/* Disable the peripheral clocks, and set the core clock frequency */
-
-	/* Turn Off ALL on-chip peripheral clocks for re-configuration */
-	write32	CKEN, CONFIG_SYS_CKEN
-
-	/* Write CCCR */
-	write32	CCCR, CONFIG_SYS_CCCR
-
-#ifdef CONFIG_RTC
-	/* enable the 32Khz oscillator for RTC and PowerManager */
-	write32	OSCC, #OSCC_OON
-	ldr	r4, =OSCC
-
-	/* Spin here until OSCC.OOK get set, meaning the PLL has settled. */
-2:
-	ldr	r5, [r4]
-	ands	r5, r5, #1
-	beq	2b
-#endif
-.endm
-
-#endif /* __ASSEMBLY__ */
-#endif /* __ASM_ARCH_PXA_MACRO_H__ */
diff --git a/arch/arm/include/asm/config.h b/arch/arm/include/asm/config.h
index 4124f0a992..c60dba26bf 100644
--- a/arch/arm/include/asm/config.h
+++ b/arch/arm/include/asm/config.h
@@ -21,9 +21,6 @@
 #ifndef _ASM_CONFIG_H_
 #define _ASM_CONFIG_H_
 
-/* Relocation to SDRAM works on all ARM boards */
-#define CONFIG_RELOC_FIXUP_WORKS
-
 #define CONFIG_LMB
 #define CONFIG_SYS_BOOT_RAMDISK_HIGH
 #endif
diff --git a/arch/arm/include/asm/global_data.h b/arch/arm/include/asm/global_data.h
index 6dae4328e6..ada3fbb641 100644
--- a/arch/arm/include/asm/global_data.h
+++ b/arch/arm/include/asm/global_data.h
@@ -30,7 +30,7 @@
  * global variables during system initialization (until we have set
  * up the memory controller so that we can use RAM).
  *
- * Keep it *SMALL* and remember to set CONFIG_SYS_GBL_DATA_SIZE > sizeof(gd_t)
+ * Keep it *SMALL* and remember to set GENERATED_GBL_DATA_SIZE > sizeof(gd_t)
  */
 
 typedef	struct	global_data {
@@ -61,7 +61,6 @@ typedef	struct	global_data {
 	unsigned long	tbu;
 	unsigned long long	timer_reset_value;
 #endif
-#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
 	unsigned long	relocaddr;	/* Start address of U-Boot in RAM */
 	phys_size_t	ram_size;	/* RAM size */
 	unsigned long	mon_len;	/* monitor len */
@@ -71,7 +70,6 @@ typedef	struct	global_data {
 #if !(defined(CONFIG_SYS_NO_ICACHE) && defined(CONFIG_SYS_NO_DCACHE))
 	unsigned long	tlb_addr;
 #endif
-#endif
 	void		**jt;		/* jump table */
 	char		env_buf[32];	/* buffer for getenv() before reloc. */
 } gd_t;
diff --git a/arch/arm/include/asm/u-boot-arm.h b/arch/arm/include/asm/u-boot-arm.h
index 4ac4f612e9..33973a32e0 100644
--- a/arch/arm/include/asm/u-boot-arm.h
+++ b/arch/arm/include/asm/u-boot-arm.h
@@ -34,16 +34,12 @@ extern ulong _bss_start_ofs;	/* BSS start relative to _start */
 extern ulong _bss_end_ofs;		/* BSS end relative to _start */
 extern ulong IRQ_STACK_START;	/* top of IRQ stack */
 extern ulong FIQ_STACK_START;	/* top of FIQ stack */
-#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
-extern ulong _armboot_start_ofs;	/* code start */
-#else
 extern ulong _TEXT_BASE;	/* code start */
 extern ulong _datarel_start_ofs;
 extern ulong _datarelrolocal_start_ofs;
 extern ulong _datarellocal_start_ofs;
 extern ulong _datarelro_start_ofs;
 extern ulong IRQ_STACK_START_IN;	/* 8 bytes in IRQ stack */
-#endif
 
 /* cpu/.../cpu.c */
 int	cpu_init(void);
@@ -56,9 +52,7 @@ int	arch_misc_init(void);
 /* board/.../... */
 int	board_init(void);
 int	dram_init (void);
-#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
 void	dram_init_banksize (void);
-#endif
 void	setup_serial_tag (struct tag **params);
 void	setup_revision_tag (struct tag **params);