diff options
| author | Peng Fan <peng.fan@nxp.com> | 2018-11-20 10:20:00 +0000 |
|---|---|---|
| committer | Stefano Babic <sbabic@denx.de> | 2019-01-01 14:12:18 +0100 |
| commit | 86ac7a9a5d0c8ae9f0e5e6ef2cc189198e498cf4 (patch) | |
| tree | 151e158f523faa632ac6083d66311b2c09de7077 /arch/arm/mach-imx/imx8m | |
| parent | e3963c0943042afcb38d99041a8dc3d55f092f5f (diff) | |
imx: add i.MX8MQ EVK support
Add i.MX8MQ EVK support. SPL will initialize ddr and load ddr phy
firmware. Then loading FIT image, ATF to OCRAM, U-Boot and DTB to
DRAM.
The boot log with Arm trusted firmware console enabled:
"
U-Boot SPL 2018.11-00142-g9ae14e7274 (Nov 20 2018 - 18:13:16 +0800)
PMIC: PFUZE100 ID=0x10
Normal Boot
Trying to boot from MMC2
NOTICE: Configureing TZASC380
NOTICE: BL31: v1.5(release):p9.0.0_1.0.0-beta-20180928-8-ge09c4b62-dirty
NOTICE: BL31: Built : 09:28:54, Nov 8 2018
lpddr4 swffc start
NOTICE: sip svc init
U-Boot 2018.11-00142-g9ae14e7274 (Nov 20 2018 - 18:13:16 +0800)
CPU: Freescale i.MX8MQ rev2.0 at 1000 MHz
Reset cause: POR
Model: Freescale i.MX8MQ EVK
DRAM: 3 GiB
MMC: FSL_SDHC: 0, FSL_SDHC: 1
In: serial
Out: serial
Err: serial
Net:
Warning: ethernet@30be0000 using MAC address from ROM
eth0: ethernet@30be0000
Hit any key to stop autoboot: 0
"
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Diffstat (limited to 'arch/arm/mach-imx/imx8m')
| -rw-r--r-- | arch/arm/mach-imx/imx8m/Kconfig | 13 |
1 files changed, 13 insertions, 0 deletions
diff --git a/arch/arm/mach-imx/imx8m/Kconfig b/arch/arm/mach-imx/imx8m/Kconfig index 98d79c3179..317dee9bc1 100644 --- a/arch/arm/mach-imx/imx8m/Kconfig +++ b/arch/arm/mach-imx/imx8m/Kconfig @@ -7,4 +7,17 @@ config IMX8M config SYS_SOC default "imx8m" +choice + prompt "NXP i.MX8M board select" + optional + +config TARGET_IMX8MQ_EVK + bool "imx8mq_evk" + select IMX8M + select IMX8M_LPDDR4 + +endchoice + +source "board/freescale/imx8mq_evk/Kconfig" + endif |