arm: imx6: configure NoC on i.MX6DQP

The i.MX6DP and i.MX6QP incorporate NoC interconnect logic
which needs to be configured in order to use external DDR memory.

This patch enables the SPL to configure the necessary registers
in accordance with the NXP engineering bulletin EB828.

Co-developed-by: Filip Brozović <fbrozovic@gmail.com>

Signed-off-by: Bernhard Messerklinger <bernhard.messerklinger@br-automation.com>
Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>

1 files changed, 96 insertions, 0 deletions

diff --git a/arch/arm/mach-imx/mx6/ddr.c b/arch/arm/mach-imx/mx6/ddr.c
index 4396880b74..69fe756b0b 100644
--- a/arch/arm/mach-imx/mx6/ddr.c
+++ b/arch/arm/mach-imx/mx6/ddr.c
@@ -945,6 +945,27 @@ void mx6sdl_dram_iocfg(unsigned width,
 		mmdc1->entry = value;					  \
 	} while (0)
 
+/* see BOOT_CFG3 description Table 5-4. EIM Boot Fusemap */
+#define BOOT_CFG3_DDR_MASK	0x30
+#define BOOT_CFG3_EXT_DDR_MASK	0x33
+
+#define DDR_MMAP_NOC_SINGLE	0
+#define DDR_MMAP_NOC_DUAL	0x31
+
+/* NoC ACTIVATE shifts */
+#define NOC_RD_SHIFT		0
+#define NOC_FAW_PERIOD_SHIFT	4
+#define NOC_FAW_BANKS_SHIFT	10
+
+/* NoC DdrTiming shifts */
+#define NOC_ACT_TO_ACT_SHIFT	0
+#define NOC_RD_TO_MISS_SHIFT	6
+#define NOC_WR_TO_MISS_SHIFT	12
+#define NOC_BURST_LEN_SHIFT	18
+#define NOC_RD_TO_WR_SHIFT	21
+#define NOC_WR_TO_RD_SHIFT	26
+#define NOC_BW_RATIO_SHIFT	31
+
 /*
  * According JESD209-2B-LPDDR2: Table 103
  * WL: write latency
@@ -1234,6 +1255,8 @@ void mx6_ddr3_cfg(const struct mx6_ddr_sysinfo *sysinfo,
 {
 	volatile struct mmdc_p_regs *mmdc0;
 	volatile struct mmdc_p_regs *mmdc1;
+	struct src *src_regs = (struct src *)SRC_BASE_ADDR;
+	u8 soc_boot_cfg3 = (readl(&src_regs->sbmr1) >> 16) & 0xff;
 	u32 val;
 	u8 tcke, tcksrx, tcksre, txpdll, taofpd, taonpd, trrd;
 	u8 todtlon, taxpd, tanpd, tcwl, txp, tfaw, tcl;
@@ -1526,6 +1549,79 @@ void mx6_ddr3_cfg(const struct mx6_ddr_sysinfo *sysinfo,
 	/* Step 12: Configure and activate periodic refresh */
 	mmdc0->mdref = (sysinfo->refsel << 14) | (sysinfo->refr << 11);
 
+	/*
+	 * Step 13: i.MX6DQP only: If the NoC scheduler is enabled,
+	 * configure it and disable MMDC arbitration/reordering (see EB828)
+	 */
+	if (is_mx6dqp() &&
+	    ((soc_boot_cfg3 & BOOT_CFG3_DDR_MASK) == DDR_MMAP_NOC_SINGLE ||
+	    (soc_boot_cfg3 & BOOT_CFG3_EXT_DDR_MASK) == DDR_MMAP_NOC_DUAL)) {
+		struct mx6dqp_noc_sched_regs *noc_sched =
+			(struct mx6dqp_noc_sched_regs *)MX6DQP_NOC_SCHED_BASE;
+
+		/*
+		 * These values are fixed based on integration parameters and
+		 * should not be modified
+		 */
+		noc_sched->rlat = 0x00000040;
+		noc_sched->ipu1 = 0x00000020;
+		noc_sched->ipu2 = 0x00000020;
+
+		noc_sched->activate = (1 << NOC_FAW_BANKS_SHIFT) |
+				      (tfaw << NOC_FAW_PERIOD_SHIFT) |
+				      (trrd << NOC_RD_SHIFT);
+		noc_sched->ddrtiming = (((sysinfo->dsize == 1) ? 1 : 0)
+					 << NOC_BW_RATIO_SHIFT) |
+				       ((tcwl + twtr) << NOC_WR_TO_RD_SHIFT) |
+				       ((tcl - tcwl + 2) << NOC_RD_TO_WR_SHIFT) |
+				       (4 << NOC_BURST_LEN_SHIFT) | /* BL8 */
+				       ((tcwl + twr + trp + trcd)
+					 << NOC_WR_TO_MISS_SHIFT) |
+				       ((trtp + trp + trcd - 4)
+					 << NOC_RD_TO_MISS_SHIFT) |
+				       (trc << NOC_ACT_TO_ACT_SHIFT);
+
+		if (sysinfo->dsize == 2) {
+			if (ddr3_cfg->coladdr == 10) {
+				if (ddr3_cfg->rowaddr == 15 &&
+				    sysinfo->ncs == 2)
+					noc_sched->ddrconf = 4;
+				else
+					noc_sched->ddrconf = 0;
+			} else if (ddr3_cfg->coladdr == 11) {
+				noc_sched->ddrconf = 1;
+			}
+		} else {
+			if (ddr3_cfg->coladdr == 9) {
+				if (ddr3_cfg->rowaddr == 13)
+					noc_sched->ddrconf = 2;
+				else if (ddr3_cfg->rowaddr == 14)
+					noc_sched->ddrconf = 15;
+			} else if (ddr3_cfg->coladdr == 10) {
+				if (ddr3_cfg->rowaddr == 14 &&
+				    sysinfo->ncs == 2)
+					noc_sched->ddrconf = 14;
+				else if (ddr3_cfg->rowaddr == 15 &&
+					 sysinfo->ncs == 2)
+					noc_sched->ddrconf = 9;
+				else
+					noc_sched->ddrconf = 3;
+			} else if (ddr3_cfg->coladdr == 11) {
+				if (ddr3_cfg->rowaddr == 15 &&
+				    sysinfo->ncs == 2)
+					noc_sched->ddrconf = 4;
+				else
+					noc_sched->ddrconf = 0;
+			} else if (ddr3_cfg->coladdr == 12) {
+				if (ddr3_cfg->rowaddr == 14)
+					noc_sched->ddrconf = 1;
+			}
+		}
+
+		/* Disable MMDC arbitration/reordering */
+		mmdc0->maarcr = 0x14420000;
+	}
+
 	/* Step 13: Deassert config request - init complete */
 	mmdc0->mdscr = 0x00000000;