arm64: mvebu: Add support for the Marvell Armada 3700 SoC

The Armada 3700 integrates the following interfaces (not complete list):
- Dual Cortex-A53 ARMv8
- USB 3.0
- SATA 3.0
- PCIe 2.0
- 2 x Gigabit Ethernet 1Gbps / 2.5Gbps
- ...

This patch adds basic support for this ARMv8 based SoC into U-Boot.
Future patches will integrate other device drivers and board support
for the Marvell DB-88F3720 development board.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Nadav Haklai <nadavh@marvell.com>
Cc: Kostya Porotchkin <kostap@marvell.com>
Cc: Wilson Ding <dingwei@marvell.com>
Cc: Victor Gu <xigu@marvell.com>
Cc: Hua Jing <jinghua@marvell.com>
Cc: Terry Zhou <bjzhou@marvell.com>
Cc: Hanna Hawa <hannah@marvell.com>
Cc: Haim Boot <hayim@marvell.com>

1 files changed, 188 insertions, 0 deletions

diff --git a/arch/arm/mach-mvebu/armada3700/cpu.c b/arch/arm/mach-mvebu/armada3700/cpu.c
new file mode 100644
index 0000000000..7d8f7b8686
--- /dev/null
+++ b/arch/arm/mach-mvebu/armada3700/cpu.c
@@ -0,0 +1,188 @@
+/*
+ * Copyright (C) 2016 Stefan Roese <sr@denx.de>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <fdtdec.h>
+#include <libfdt.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/soc.h>
+#include <asm/armv8/mmu.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* Armada 3700 */
+#define MVEBU_GPIO_NB_REG_BASE		(MVEBU_REGISTER(0x13800))
+
+#define MVEBU_TEST_PIN_LATCH_N		(MVEBU_GPIO_NB_REG_BASE + 0x8)
+#define MVEBU_XTAL_MODE_MASK		BIT(9)
+#define MVEBU_XTAL_MODE_OFFS		9
+#define MVEBU_XTAL_CLOCK_25MHZ		0x0
+#define MVEBU_XTAL_CLOCK_40MHZ		0x1
+
+#define MVEBU_NB_WARM_RST_REG		(MVEBU_GPIO_NB_REG_BASE + 0x40)
+#define MVEBU_NB_WARM_RST_MAGIC_NUM	0x1d1e
+
+static struct mm_region mvebu_mem_map[] = {
+	{
+		/* RAM */
+		.phys = 0x0UL,
+		.virt = 0x0UL,
+		.size = 0x80000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+			 PTE_BLOCK_INNER_SHARE
+	},
+	{
+		/* SRAM, MMIO regions */
+		.phys = 0xd0000000UL,
+		.virt = 0xd0000000UL,
+		.size = 0x02000000UL,	/* 32MiB internal registers */
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE
+	},
+	{
+		/* List terminator */
+		0,
+	}
+};
+
+struct mm_region *mem_map = mvebu_mem_map;
+
+/*
+ * On ARMv8, MBus is not configured in U-Boot. To enable compilation
+ * of the already implemented drivers, lets add a dummy version of
+ * this function so that linking does not fail.
+ */
+const struct mbus_dram_target_info *mvebu_mbus_dram_info(void)
+{
+	return NULL;
+}
+
+void reset_cpu(ulong ignored)
+{
+	/*
+	 * Write magic number of 0x1d1e to North Bridge Warm Reset register
+	 * to trigger warm reset
+	 */
+	writel(MVEBU_NB_WARM_RST_MAGIC_NUM, MVEBU_NB_WARM_RST_REG);
+}
+
+/*
+ * get_ref_clk
+ *
+ * return: reference clock in MHz (25 or 40)
+ */
+u32 get_ref_clk(void)
+{
+	u32 regval;
+
+	regval = (readl(MVEBU_TEST_PIN_LATCH_N) & MVEBU_XTAL_MODE_MASK) >>
+		MVEBU_XTAL_MODE_OFFS;
+
+	if (regval == MVEBU_XTAL_CLOCK_25MHZ)
+		return 25;
+	else
+		return 40;
+}
+
+/* DRAM init code ... */
+
+static const void *get_memory_reg_prop(const void *fdt, int *lenp)
+{
+	int offset;
+
+	offset = fdt_path_offset(fdt, "/memory");
+	if (offset < 0)
+		return NULL;
+
+	return fdt_getprop(fdt, offset, "reg", lenp);
+}
+
+int dram_init(void)
+{
+	const void *fdt = gd->fdt_blob;
+	const fdt32_t *val;
+	int ac, sc, len;
+
+	ac = fdt_address_cells(fdt, 0);
+	sc = fdt_size_cells(fdt, 0);
+	if (ac < 0 || sc < 1 || sc > 2) {
+		printf("invalid address/size cells\n");
+		return -EINVAL;
+	}
+
+	val = get_memory_reg_prop(fdt, &len);
+	if (len / sizeof(*val) < ac + sc)
+		return -EINVAL;
+
+	val += ac;
+
+	gd->ram_size = fdtdec_get_number(val, sc);
+
+	debug("DRAM size = %08lx\n", (unsigned long)gd->ram_size);
+
+	return 0;
+}
+
+void dram_init_banksize(void)
+{
+	const void *fdt = gd->fdt_blob;
+	const fdt32_t *val;
+	int ac, sc, cells, len, i;
+
+	val = get_memory_reg_prop(fdt, &len);
+	if (len < 0)
+		return;
+
+	ac = fdt_address_cells(fdt, 0);
+	sc = fdt_size_cells(fdt, 0);
+	if (ac < 1 || sc > 2 || sc < 1 || sc > 2) {
+		printf("invalid address/size cells\n");
+		return;
+	}
+
+	cells = ac + sc;
+
+	len /= sizeof(*val);
+
+	for (i = 0; i < CONFIG_NR_DRAM_BANKS && len >= cells;
+	     i++, len -= cells) {
+		gd->bd->bi_dram[i].start = fdtdec_get_number(val, ac);
+		val += ac;
+		gd->bd->bi_dram[i].size = fdtdec_get_number(val, sc);
+		val += sc;
+
+		debug("DRAM bank %d: start = %08lx, size = %08lx\n",
+		      i, (unsigned long)gd->bd->bi_dram[i].start,
+		      (unsigned long)gd->bd->bi_dram[i].size);
+	}
+}
+
+int arch_cpu_init(void)
+{
+	/* Nothing to do (yet) */
+	return 0;
+}
+
+int arch_early_init_r(void)
+{
+	struct udevice *dev;
+	int ret;
+
+	/* Call the comphy code via the MISC uclass driver */
+	ret = uclass_get_device(UCLASS_MISC, 0, &dev);
+	if (ret) {
+		debug("COMPHY init failed: %d\n", ret);
+		return -ENODEV;
+	}
+
+	/* Cause the SATA device to do its early init */
+	uclass_first_device(UCLASS_AHCI, &dev);
+
+	return 0;
+}