diff options
| author | Adam Ford <aford173@gmail.com> | 2018-12-14 16:28:30 -0600 |
|---|---|---|
| committer | Tom Rini <trini@konsulko.com> | 2018-12-26 21:20:48 -0500 |
| commit | a1702746dfd985f69c1c32ae9618f066443e43a9 (patch) | |
| tree | 739784967b0a50c52a6908f8a2fa9ddb1ea7e62d /arch/arm/mach-omap2/omap3 | |
| parent | 5766a271761210a78faf04b68136676a672fabc4 (diff) | |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL
OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3
boards. At one point, the #ifdef's were replaced with
if CONFIG_IS_ENABLED but this won't work for people who need
OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't
used in Kconfig. This patch moves the check to #if defined and
also makes Kconfig select the banks if CMD_GPIO is used which
makes the checks in the code less cumbersome.
Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable
all GPIO with CMD_GPIO")
Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com>
Signed-off-by: Adam Ford <aford173@gmail.com>
[trini: Migrate omap3_igep00x0.h]
Signed-off-by: Tom Rini <trini@konsulko.com>
Diffstat (limited to 'arch/arm/mach-omap2/omap3')
| -rw-r--r-- | arch/arm/mach-omap2/omap3/Kconfig | 5 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/omap3/clock.c | 10 |
2 files changed, 10 insertions, 5 deletions
diff --git a/arch/arm/mach-omap2/omap3/Kconfig b/arch/arm/mach-omap2/omap3/Kconfig index e0d02fb4e5..0286b0daa3 100644 --- a/arch/arm/mach-omap2/omap3/Kconfig +++ b/arch/arm/mach-omap2/omap3/Kconfig @@ -3,18 +3,23 @@ if OMAP34XX # We only enable the clocks for the GPIO banks that a given board requies. config OMAP3_GPIO_2 bool + default y if CMD_GPIO config OMAP3_GPIO_3 bool + default y if CMD_GPIO config OMAP3_GPIO_4 bool + default y if CMD_GPIO config OMAP3_GPIO_5 bool + default y if CMD_GPIO config OMAP3_GPIO_6 bool + default y if CMD_GPIO choice prompt "OMAP3 board select" diff --git a/arch/arm/mach-omap2/omap3/clock.c b/arch/arm/mach-omap2/omap3/clock.c index 9a03bfa9d3..cb9e91ebc3 100644 --- a/arch/arm/mach-omap2/omap3/clock.c +++ b/arch/arm/mach-omap2/omap3/clock.c @@ -750,23 +750,23 @@ void per_clocks_enable(void) setbits_le32(&prcm_base->iclken_per, 0x00000800); #endif -#if (CONFIG_IS_ENABLED(OMAP3_GPIO_2) || CONFIG_IS_ENABLED(CMD_GPIO)) +#if defined(CONFIG_OMAP3_GPIO_2) setbits_le32(&prcm_base->fclken_per, 0x00002000); setbits_le32(&prcm_base->iclken_per, 0x00002000); #endif -#if (CONFIG_IS_ENABLED(OMAP3_GPIO_3) || CONFIG_IS_ENABLED(CMD_GPIO)) +#if defined(CONFIG_OMAP3_GPIO_3) setbits_le32(&prcm_base->fclken_per, 0x00004000); setbits_le32(&prcm_base->iclken_per, 0x00004000); #endif -#if (CONFIG_IS_ENABLED(OMAP3_GPIO_4) || CONFIG_IS_ENABLED(CMD_GPIO)) +#if defined(CONFIG_OMAP3_GPIO_4) setbits_le32(&prcm_base->fclken_per, 0x00008000); setbits_le32(&prcm_base->iclken_per, 0x00008000); #endif -#if (CONFIG_IS_ENABLED(OMAP3_GPIO_5) || CONFIG_IS_ENABLED(CMD_GPIO)) +#if defined(CONFIG_OMAP3_GPIO_5) setbits_le32(&prcm_base->fclken_per, 0x00010000); setbits_le32(&prcm_base->iclken_per, 0x00010000); #endif -#if (CONFIG_IS_ENABLED(OMAP3_GPIO_6) || CONFIG_IS_ENABLED(CMD_GPIO)) +#if defined(CONFIG_OMAP3_GPIO_6) setbits_le32(&prcm_base->fclken_per, 0x00020000); setbits_le32(&prcm_base->iclken_per, 0x00020000); #endif |